Found a burned chip. Looking for name and type.

Hello again, AMB group. I looked for similar pictures/ posts, but I did not find something with the detail here. Anyway, I've got a problem where my hard drive won't even spin up (seems like no power to the drive) but everything else checks out fine on the logic board. Micromat TT and the Hardware Test disk give it OKs. So I went through the process of taking out the logic board looking for problems, and I've found a super duper one. Here is a link to the picture of the burned chip, located right below the processor.
http://fs6.depauw.edu:50080/~jonathanstack/burnedchip.jpg
I've ordered a couple bad logic boards, hoping one of them will have a salvageable chip. But I'm wondering if this is a programmed, proprietary chip, or if I can get one from Newark or something. I think I will take it to an electronics shop to have them solder the new chip on; I don't have a micro soldering iron.
Look forward to any thoughts on replacing the chip. Of course replacing the logic board is a possibility, but you can see this might be cheaper, because a bad logic board runs less than $15 usually.
Bye for now,
JG

Hi J,
Have you tried a different HD and/or tried this HD in an enclosure or another PB? Obviously that chip looks bad, but the motor mechanism or the electronics on the HD could be bad, having nothing to do with the chip.
Was everything working fine (all ports etc.) before this?
Regarding the chip itself: if the HD checks out ok, the chip should be an interesting proposition. I can't recall ever hearing of anyone replacing any soldered on part of a logic board. Even for certified repair shops, the "fix" is to replace the LB, and faulty boards are sent to specialized repair centers with the specialized equipment to tackle the job. I hope you are successful and will post back with results. Good luck.

Similar Messages

Invalid tag found: unexpected input while looking for attr name or '/ '

Hi All,
I am using apach myfaces version 1.1.5 and tomahawk version 1.1.5 in my project with tomcat 6.
On one of my jsp page i am having a text box with value like D:\myfolder\subfolder\ .
When this page is rendering i am getting following warning at console
WARN [http-8080-2] 10-07 16:26:46 Invalid tag found: unexpected input while looking for attr name or '/>' at line 212 (ReducedHTMLParser.java:566)Is there any way i can get rid of this problem?
Thanks and Regards,
Khush.

panky_p wrote:
One more thing have modifying the value for D:\myfolder\subfolder\ . As it has invalid escape sequence and string value will not be returned
you will have to manipulate your string.
Edited by: panky_p on Oct 7, 2009 11:38 AM
you have to manipulate and add escape sequences somethin like "D:\\myfolder\\subfolder\\" or "D:/myfolder/subfolder/"Hi Panky,
I have just downloaded myfaces blank war file with myfaces-api-1.1.6.jar , myfaces-impl-1.1.6.jar and tomahawk-1.1.7-SNAPSHOT.jar for testing purpose and then in helloword.jsp i write the code like followings:
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<html>
    <head>
        <title>Hello World</title>
    </head>
    <body>
        <f:view>
            <h:form id="form">
              <h:panelGrid id="grid" columns="2">
                <h:outputText id="output1" value="Please enter your name"/>
                <h:inputText id="input1" value="D:\\spool\\test_receiver_11\\" required="true"/>
                <h:message id="message1" for="input1"/>
              </h:panelGrid>
            </h:form>
        </f:view>
    </body>
</html>And in the console i again got the following err :
WARNING: Invalid tag found: unexpected input while looking for attr name or '/>' at line 10. Surroundings: '" name="form_SUBMIT" value="1"'.
Can you check again?

Vista looking for drivers and BSODs

I bought a 3TB MyCloud device a few months ago. I cannot get it to work properly with my Windows Vista desktop and support refused to help. They remoted in and accessed the device without using their software and claimed it was a Windows problem, not theirs. When I connect the device directly to my Ubee Wireless Router/Switch, Windows Vista immediately sees it as new hardware and tries to find drivers for it. Of course WD does not provide these. In Device Manager, it shows up under Other Devices with a warning indicator because there are no drivers installed. I was able to copy files to the device, but when I try to access them from the device, my Windows Vista desktop gets a BSOD (this happened after the call to support). I've now disconnected the device from my network as the constant BSODs damaged my computer. The device works with my Windows 8.1 computer, but has problems with my Sony Blu-Ray player connected wirelessly to the network. I've posted about this in a different thread. Is there a way to get this working properly with Windows Vista?

Bennor wrote:
The BSOD that other thread talks about appears to be related to using one of the WD apps, my guess is the WD My Cloud Desktop app on their Windows PC. There is a known issue for some who use the WD My Cloud Desktop app where once that app is opened, some users experience Windows Explorer crashing. There is one or two other threads covering this very specific Windows Explorer crashing issue related to that WD My Cloud Desktop app that affects a few users. Generally one does not need to install "drivers" to access the WD My Cloud. One should be able to access the WD My Cloud on their local network via Windows Explorer (NOT Internet Explorer). It will show up in the "Network Neighborhood" or under "Network". If it is not showing up under Network then check the network settings on both the Vista PC, ensuring it has the same Network Name/Network Workgroup (typically "workgroup") that the WD My Cloud uses under "Settings -> Network -> Network Workgroup". The other recommended suggestion is to configure the WD My Cloud for a static IP. Either within the WD My Cloud administration UI or within one's router/gateway. Both the Vista PC and the WD My Cloud should be in the same IP address subnet (for example both should have an IP address in the 192.168.1.x range). If you have not done so read through the WD My Cloud User Manual in particular "Using Windows XP/Vista/Windows 7" under "Getting to the Public Share" for the general procedure of accessing the WD My Cloud shared folders with Windows Explorer on Windows Vista.You and I are worlds apart on this issue. Your solution doesn't relate to my problem. I did not have a problem getting to or seeing the device in Vista. There were two problems and I believe I've cured both of them, though I don't know how. Problem 1: Vista keeps asking for drivers. When I connected the device to my network, Vista would see the device and try to locate drivers as if it had found a new printer. It couldn't find any so I had to close the driver request windows without finding drivers. The device then would show up in Device Manager under Other Devices with a yellow exclamation mark indicating the drivers were not loaded correctly. After several BSODs (for a different issue), I ran SFC and CHKDSK on my computer. Neither program found a problem. Then when I tried to connect the device again, Vista started looking for drivers and I walked away from the computer for the evening. When I had come back, it said the drivers were loaded. In Device Manager, Vista shows a new device category named "Western Digital NAS" with two devices installed: My Cloud Network Media Server and My Cloud Network Storage. The driver problem is now solved but I don't know how. Problem 2: Files I had loaded onto the shares to learn how to use the device can be seen in Windows Explorer. That was never a problem. However, as soon as I clicked on a file, the screen would scramble and then BSOD. This only occurred with files loaded onto the MyCloud device. After some blue screens, I started up into Safe Mode with Networking. I was able to click on the files without crashing, though Media Player wouldn't play them or even start in Safe Mode. I then did a clean boot and it tested okay. As I added items in MSCONFIG, the problem would not recur. There was one item that prevented me from even setting MSCONFIG to do a normal startup, and that was Kaspersky Internet Security 2015. Not only that, but I couldn't start the software at all. I did a complete removal of Kaspersky and then reinstalled it. I no longer have any BSODs. Both issues, as mysterious as they were, have mysteriously been resolved. I have a DLNA issue, but that's in another post. I also have a new issue with the WD My Cloud desktop app but I don't need to use that and if I do, I'll start a new discussion.

How do i find a recent backup from on icloud. i don't want to restore on my iphone, just view on my Pc and keep as file. looking for pics and video i recorded thanks

How do i find a recent backup from on icloud. i don't want to restore on my iphone, just view on my Pc and keep as file. looking for pics and video i recorded thanks

The password is set on the WiFi router providing the service, by the owner of the network to prevent unwanted "guests" accessing the network. The only way to know it is to ask the owner permission to use the network. Otherwise, you have to find a free WiFi hotspot that doesn't require a password.

My mac 10.8 does no have the file, com.apple.desktop. plist I wentto lIbrary, preference and look for it and it is not where in my mac. I also launch time machine and file is no where on my Mac. How do I get this file back?

My mac 10.8 does no have the file, com.apple.desktop. plist I wentto lIbrary, preference and look for it and it is not where in my mac. I also launch time machine and file is no where on my Mac. How do I get this file back?
thanks

System files are hidden by default in Finder now, search for what you want then click the little + button on the top right of the bar that appears when you do a search. A new bar comes up and click the first box (that says "Kind"), change it to "System Files". Then change the box that says "aren't included" to "are included" and your file should show up.
http://osxdaily.com/2009/02/25/show-hidden-files-in-os-x/

I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html a

I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html and use another ftp client to upload (to the same server) but this is tedious and making minor changes is painful. Have you encountered this and found a solution?

Hi Susan,
In that case I will recommend that you consult a local technician/IT team and see if there is some network connectivity issue with your machine.
- Abhishek Maurya

I had photos uploaded in "My Library" in photoshop express in 2011. I just signed in to look for them and I don't see them anywhere. Were they deleted?

Hi,
I had photos uploaded in "My Library" in photoshop express in 2011. I just signed in to look for them and I don't see them anywhere. Were they deleted?

You can ask in that forum. Photoshop Express for Windows
Gene

What's the deal w/ Pages and Merge Fields. I've spent an hour looking for it and poof it's gone. What the ****?

What's the deal w/ Pages and Merge Fields. I've spent an hour looking for it and poof it's gone. What the ****?

https://discussions.apple.com/message/25419393#25419393
Peter

UK based Alliance Member looking for local and remote opportunities

Austin Consultants is looking for contract and part
time opportunities in the whole of UK and Europe and remote work for companies all over the world. With the current
exchange rate situation, we have become really cost-effective for our clients in America, Canada, Australia and
Europe. If you are looking for expert advice on LabVIEW and other
National Instruments software development, please don't hesitate to
contact us at info at austinconsultants dot co dot uk. A brief
description of our company is provided below and a link to our website
is mentioned in my signature as well. My personal email is provided on my profile page.
Austin Consultants are the UKs highest certified LabVIEW
specialists and National Instruments Alliance Partner. We integrate
test, measurement and control systems across the industrial sector and
and are experts in LabVIEW,
TestStand, NI VISION, CVI, C, C#, .NET and Silverlight. We
have previous experience with the Tokomak Textor Fusion Reactor, and
have strong
Aerospace and Military background with Airbus, Goodrich and Horstman
Defence. We have worked with companies in the field of Green
Engineering, Research and Innovation, Optoelectronics, Automotive and
Medical device manufacturing.
Message Edited by Adnan Z on 05-14-2010 10:27 AM
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Dear Sir,
I would like to get an opportunity to participate in your upcoming or ongoing projects and work for you as a team member. I am a final year MSc Electrical and Communications Engineering student at University of Greenwich UK. Please give me some task to deliver as my MSc final year project or it could provide results for my project. From this experience I intend to move to enhanced certification level and have an experience of working with professionals in the industry.
My experience of LabVIEW programming and hardware integration is two years plus and I have successfully done my CLAD LabVIEW certification at NI Week last year in London. On my job I was responsible to interact with clients, gather their requirements, suggest suitable hardware modules and then program and integrate to provide deliverable solution.
Please find my CV attached and contact me at your most convenient. I can work in your South East office at Northolt if required.
Best Regards,
Harris Junaid
Cell: 07813 764372
email: [email protected]
Attachments:
Harris_Junaid(CV).docx ‏24 KB

Connect To Server Hangs Before Prompting For Name And Password

Hi Everyone.
Connect to Server hangs for 25 seconds before prompting for name and password.
I am trying to access a share on a Windows 2008 R2 domain controller via a Mac running 10.6.8 (Snow Leopard) using SMB.
Example: smb://192.168.101.11/sharename
Once connected, browsing is fine - it's just the connecting that takes a long time.
I have specified port 139 and login name, I have disabled IP6 on the Mac, the Mac and Windows 2008 server are on the same LAN and are wired.
Again, once connected, browsing is fine - it's just the connecting that takes a long time.
Any help would be appreciated.
Damian

Something to add ...
Connecting to a Windows 2008 stand-alone server outside of the domain (e.g., workgroup) does not have the same problem - the name and password prompt shows immediately.

I can't log in on my mac book pro, when I open ask for name and password

I can't log in on my mac book pro, when I open ask for name and password but it doesn't acept ...

Which OS is installed on your Mac?

Can the Post Results box for name and email be resized?

Depending on the size of the browser window the box that asks for name and email for posting quiz results can be very small. Is there any way to resize it? This is with Captivate 6 and Scalable HTML Content turned on.

Hi Judy,
These are run time messages and you can change it by the below steps:
If you want to modify specific labels that you can't modify through Captivate, you can do this with the file strings.txt, that is located in Adobe Captivate instalation folder >en_US
1. Open file
2. Modify whatever label you want
3. Save.
4. Rename to strings.zdct
5. Replace original strings.zdct file
6. Restart Captivate
I suggest you backup original strings.txt and strings.zdct files - just in case.
Regards,
Mayank

HELP!!! I can't get into my macbookpro I unticked something in user account and today iv gone to boot up and I'm getting grey screen asking for name and password and. My normal ones don't work? How can I gain access again?

Yesterday I was in user account settings trying to delete an extra user account that had appeared and I unticked something and today iv gone to boot up and iv got the grey screen asking for name and password and my normal ones sent working how do I get in agin? Any help would be appreciated thanks sam

Boot into your Recovery partition by holding down the Command and R keys on startup. Under the Utilities menu, open Terminal. When in Terminal type:
resetpassword
A small app will open that will allow you to reset the password for a given user (hopefully you still have an admin home directory?). Type in your new password - twice - and then reboot and use your new password.
Clinton

My iphone 5 not sync over wifi, when i put a song or something is deconecting. Says looking for iphone and deconecting.

My iphone 5 not sync over wifi, when i put a song or something is deconecting. Says looking for iphone and deconecting. i have a old iphone 3gs and its work perfect.

Hi there mistre89,
You may find the troubleshooting steps in the article below helpful.
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
http://support.apple.com/kb/ts4062
-Griff W.

Since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says "Wi-Fi: Looking for networks- and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution?

since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.

since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.

Found a burned chip. Looking for name and type.

Similar Messages

Maybe you are looking for