Found a few other bugs

1. Transparancy
2. Font settings in Edge Animate do not match Muse font settings ( letter spacing )
3. On a text asset applying a Blur filter and have it fade to zero doesn't work. Zero seems to be at 1 even though it says zero
Thanks,
Peter McCabe

27-Nov-200703:53 PM
ttr738 wrote:
Got this fone a week or so ago. The main bug I have found is the sleep mode:
With the fone closed and the keypad locked, the screen goes blank and the backlight goes out like it should, initially. Then after about a minute the fone lights up again without anything being pressed. Not just the flashing light to show it's on - fully lit up. The backlight eventually goes back to it's lowest level, but doesn't fully turn off (if you look carefully in a darkened room). There's nothing displayed on the screen throughout, but it must be draining the battery.
Anyone else have this problem?
Nope, don't have this bug.
Got the 053 firmware (20-09-07)
Regards
Yves

Similar Messages

[svn:fx-trunk] 9892: Panel skin changes per XD spec, and a few other Panel Skin bugs.

Revision: 9892
Author:   [email protected]
Date:     2009-09-01 16:06:51 -0700 (Tue, 01 Sep 2009)
Log Message:
Panel skin changes per XD spec, and a few other Panel Skin bugs. Default Panel size changed to match spec. Panel titles are now single-line and show ellipsis.
QE Notes: Panel-related bitmap compares will need upgrading
Panel_Properties_title5
Panel_Properties_DfrdInst_none
Panel_Properties_DfrdInst_auto
Doc Notes: None
Bugs: SDK-21680, SDK-21671, SDK-21666, SDK-19962, SDK-19959
Reviewer: Ryan
API Change: No
Is noteworthy for integration: No
tests: checkintests mustella/managers/Panel
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21680
    http://bugs.adobe.com/jira/browse/SDK-21671
    http://bugs.adobe.com/jira/browse/SDK-21666
    http://bugs.adobe.com/jira/browse/SDK-19962
    http://bugs.adobe.com/jira/browse/SDK-19959
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Panel.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/ApplicationSkin.mxml
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/PanelSkin.mxml
    flex/sdk/trunk/frameworks/projects/wireframe/defaults.css
    flex/sdk/trunk/frameworks/projects/wireframe/src/WireframeClasses.as
    flex/sdk/trunk/frameworks/projects/wireframe/src/spark/skins/wireframe/PanelSkin.mxml
Added Paths:
    flex/sdk/trunk/frameworks/projects/wireframe/src/spark/skins/wireframe/ApplicationSkin.mx ml

New forum: http://forums.adobe.com/community/flash_builder

Downloaded video restarts abruptly, and one other bug

I am using Win XP Pro, latest version of iTunes, and recently I purchased some episodes of LOST. I have a broadband connection at home and at work one broadband + one E1 internet access used concurrently. I have a queue of up to 25 shows to be downloaded, whenever my notebook is on, I am downloading shows, but I tweak the downloads list a bit:
1. I pause all downloads.
2. I set it up manually to download the shows in a specific order, so as to be able to download the shows next in line after the ones already downloaded
3. I watch previously downloaded shows, and when one is done, it automatically plays the next one, even if it is downloading. An hence, my problem:
So far, I am able to watch these currently downloading shows with no problem, until a couple of days ago, while watching a show that had 4 minutes left to finish downloading, the player suddenly stopped, showed the "Nothing Playing" screen and to my dismay, began downloading the show again from zero. I tried finding the file, and it had been erased an nowhere to be found. It has happened three times and it seems odd that I can't seem to replicate the error. Some downloads do it, but the majority doesn't. I opted to let iTunes finish the download just to be on the safe side. However, I was wondering if somebody got the same error?
The other bug I mentioned has to do with manually organizing the download list. If I pick up a download item (tv show only) and while dragging up to the top of the list, if I accidentally over-run it a bit and hover it over the gray bar on top (where the play, next and previous buttons are located, and where the info screen shows up) iTunes immediately crashes and closes up. This one has been a replicable error, and wondered if someone else also had issues with this error?
In addition to it, does anyone know how to change the download queue order permanently so that every time you close and open iTunes it remains in the same order?

I am using Win XP Pro, latest version of iTunes, and recently I purchased some episodes of LOST. I have a broadband connection at home and at work one broadband + one E1 internet access used concurrently. I have a queue of up to 25 shows to be downloaded, whenever my notebook is on, I am downloading shows, but I tweak the downloads list a bit:
1. I pause all downloads.
2. I set it up manually to download the shows in a specific order, so as to be able to download the shows next in line after the ones already downloaded
3. I watch previously downloaded shows, and when one is done, it automatically plays the next one, even if it is downloading. An hence, my problem:
So far, I am able to watch these currently downloading shows with no problem, until a couple of days ago, while watching a show that had 4 minutes left to finish downloading, the player suddenly stopped, showed the "Nothing Playing" screen and to my dismay, began downloading the show again from zero. I tried finding the file, and it had been erased an nowhere to be found. It has happened three times and it seems odd that I can't seem to replicate the error. Some downloads do it, but the majority doesn't. I opted to let iTunes finish the download just to be on the safe side. However, I was wondering if somebody got the same error?
The other bug I mentioned has to do with manually organizing the download list. If I pick up a download item (tv show only) and while dragging up to the top of the list, if I accidentally over-run it a bit and hover it over the gray bar on top (where the play, next and previous buttons are located, and where the info screen shows up) iTunes immediately crashes and closes up. This one has been a replicable error, and wondered if someone else also had issues with this error?
In addition to it, does anyone know how to change the download queue order permanently so that every time you close and open iTunes it remains in the same order?

Did something adjust overnight with ICLOUD? I got up this morning and found a few calendars completely erased - all my birthdays and categories were completely gone!! Any ideas??

Did something adjust overnight with ICLOUD? I got up this morning and found a few calendars completely erased - all my birthdays and a few other categories were completely gone!! Any ideas??

Temperature Monitorhttps://www.macupdate.com/app/mac/12381/temperature-monitor
http://www.bresink.com/osx/HardwareMonitor.html
SMCFanControl 2.4+
https://www.macupdate.com/app/mac/23049/smcfancontrol
UPS
http://www.amazon.com/CyberPower-CP1500PFCLCD-Compatible-1500VA-Tower/dp/B00429N 19W/
Metro Vacuum ED500 DataVac 500-Watt 0.75-HP Electric Duster 120-Volt
www.amazon.com/Metro-Vacuum-ED500-500-Watt-Electric/dp/B001J4ZOAW/
X1900
http://www.xlr8yourmac.com/Graphics/X1900XT_Overheating/ATI_X1900_artifacts.html
http://www.xlr8yourmac.com/Graphics/radeon_X1900XT/X1900XT_dust_buildup.html#sto rytop
ATI Radeon 5770
http://store.apple.com/us/product/MC742ZM/A
http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M
http://www.bhphotovideo.com/c/product/726537-REG/Apple_MC742ZM_A_ATI_Radeon_HD_5 770.html
How To Install and Remove Memory Mac Pro
https://support.apple.com/kb/HT4433
2x2GB FBDIMM DDR2 667MHz @ $32http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
Resetting the System Management Controller (SMC)https://support.apple.com/kb/HT3964

Hi, i have edited a clip in hd with final cut, now I need to export it in 2K format . anybody knows how i can do it in FCP? in internet I found only few info about 2K format: no more than frame size. nothing about codec or similar. thanks for any help.

Hi, i have edited a clip in hd with final cut, now I need to export it in 2K format. anybody knows how i can do it in FCP? in internet I found only few info about 2K format: no more than frame size. nothing about codec or similar. thanks for any help.

SoCal thanks for the attention,
sorry for having wrote the question directly in the subject, but first i wrote it by text edit then copied it, but in the wrong place too.....
coming to my question, timeline settings are:
as it is a commercial promo that must be projected in a multiplex cinema, the 2K format is needed.
I've heard about transcoding services, and they are very expensive.
so i'm looking if there is a way to do everything by fcp.
the project will be delivered as SD DVD for archive pourposes and as a single file for the projection or eventually transconding.
p.s.: sorry for my english, i'm from italy: had my last english lesson 35 years ago!

[svn] 2286: Fix a few asc bugs:

Revision: 2286
Author: [email protected]
Date: 2008-06-27 11:44:07 -0700 (Fri, 27 Jun 2008)
Log Message:
Fix a few asc bugs:
ASC 3339 vector variable definition crashes asc
ASC 2932 const definitions in a for loop do not report error in strict mode
ASC 2843 [ArrayElementType] tag causing duplicate method definintions in ASDoc output
Flex checkintests, tamarin tests pass
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/Compiler.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/semantics/FlowAnalyzer.java

1. read the info posted on this link--especially the section on 'Virtual Memory' (item number 6).
http://kb2.adobe.com/cps/320/320782.html
2. I have been using Illustrator since vers 7 and am currently running CS4, CS5 and CS5.1 on the same machine with one hard drive and 8GB of Ram....and have NEVER experienced ANY of the glitches that you mention.
3.I believe you may have a conflict between your virtual memory settings in windows and your scratch disk settings for illustrator.
per Adobe... "For best performance, choose a hard drive not used for the Illustrator scratch disk." (this is in reference to setting your virtual memory on a Windows platform)

[svn:fx-trunk] 13077: Take out some FIXME's, change a few others to TODO

Revision: 13077
Revision: 13077
Author:   [email protected]
Date:     2009-12-17 14:13:40 -0800 (Thu, 17 Dec 2009)
Log Message:
Take out some FIXME's, change a few others to TODO
QE Notes: None
Doc Notes: None
Bugs: FIXME
Reviewer: Corey
API Change: No
Is noteworthy for integration: No
tests: checkintests
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/ModifiedCollectionView.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/List.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/listClasses/ListBase.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as

Pull down the separator bar at the bottom of the color board to create more space for the percentages.
The color board and audio enhancements are parts of the inspector. You close the inspector with Cmd-4.
Cmd-E is the default export setting. It's assignable to any preset or custom export setting. Open Destination preferences, right-click on the setting you want and select make default.

LR5 resetting crops... and numerous other bugs

Is there a place to report LR5 bugs? I've had LR5 1.5 days and have found a slew of bugs. The most debilitating one for me so far is:
- I crop a photo, more specifically I change the orientation of a vertical photo by hitting "X" to get a landscape-oriented crop on it. Then edit it and move on to other images. When I return to the first image, LR has reset the crop. "Crop Rectangle" actually shows on the top of the History, although I did not perform that step. I will either (a) undo that history step, stepping back to an earlier history step, or (b) completely re-crop it. Then move on to another image. In either case, when I return... the crop has been reset again.
A couple other ones:
- LR kept selecting 2 images, even though I had only selected one. For a period of time when I had one image selected and did various things like changed a sorting qualifier (for example went from flagged photos only to flagged and unflagged) or even closed & restarted LR, 2 images would be selected upon return. Doesn't sound like a big deal at first, but there were other things going on that I think are related - for example, my "Previous" button was totally gone for a while, replaced by the "Sync..." button, even when I only had one image selected. Normally 'Sync...' appears when multiple images are selected. So I couldn't use 'previous'. It was as though LR thought there were 2 or more images selected, even though there weren't. And again, each time I changed any number of things like filters a 2nd selected image would occur. I rebooted my computer and it seems to have disappeared for now.
- When sorting for flagged photos only, I will unflag a photo to knock it out of the set I'm working on (editing in Develop). Most of the time it behaves properly - unflags the photo and removes it from the set I'm looking at. But numerous times it has removed it from the filmstrip but kept displaying it in the main viewing (center) panel.
- When renaming files, the previews aren't following along properly (sporadic but somewhat frequent). For example: if I have 10 images, Smith001 through Smith010, and I'm sorting/viewing by File Name, if I want to switch the order of 2 images I will rename them. Say I want Smith007 (a B&W) to come before Smith006 (a color image). I will swap names, so that they are in the order I want not only in Lr but also on export, when burning to disks, displaying in my online hosting program, etc. So I F2-rename Smith006 to Smith007 (it's auto renamed Smith007-02 since Smith007 already exists), then F2 rename Smith007 to Smith006, then finally F2 rename Smith007-02 to Smith007). Their order is now swapped, the B&W one first, and will occur in that order everywhere even outside Lr. However, somewhat frequently after doing this name swap the preview for one of the images will not be correct. In this example, the new 007, a color photo, will have all the edits from the new 006 applied to it in the filmstrip (so, it's incorrectly showing as B&W), and will even display that incorrect way in the main display panel in Library, and also in Develop until it is completely loaded. Sometimes restarting Lr once or twice with that photo selected in Develop will correct it. Sometimes not. And creating 1:1 previews does not fix it. Nor does discarding the 1:1 previews & creating new ones.

Hi,
Your last problem sonds like the bug I found some days ago...
http://forums.adobe.com/thread/1221174
Only "fix" I have found is to delete the previews all together, and let LR recreate them for the entire catalog.

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

Problem Inserting Euro Symbol and few others

We are using java application with oracle 8.1.6 as the db with the charset as WE8ISO8859P15. ALl the forms are using multipart request. We cannot do away without that. When trying to insert euro symbol and few other western european characters, they get converted to something else before getting stored in the db and so we are not able to display them properly on retrieval.
Can anyone please help in this direction?

Just set the nls_charset.zip in classpath and then try to insert into db.I think it might not be a problem with database.(note. if u insert euro character it will be reside in db, as some format but u retrive it and stream it thru servlet it will be displayed in the browser properly, if u write using printwriter then it might give "?" / "O" in browser. refer http://www.inter-locale.com/faq/blacksquares.jsp).

Why has bingbar been took off it had my home page and few other things I used

I had the Bingbar add on and it has disappeared??? It had shortcuts like my home page and print, copy and a few others please help
Lin

That extension may not be compatible with Firefox 6.0 beta.
{Ctrl + Shft + A} to open the Addons Manager tab, does that add-on show as being incompatible with Firefox 6?

I've had cydia put on my device didn't like it so deleted ap and now I cant get back into Icloud it's gone very faded in couler the icon in settings. Facebook Twitter and a few others have done the same. I need iCloud back please help!

Hi please help me I'm useles with these thing. I've had cydia put on my device didn't like it so deleted ap and now I cant get back into Icloud it's gone very faded in couler the icon in settings. Facebook Twitter and a few others have done the same. I need iCloud back please help!

I'm sorry we cannot help you.
You have Jailbroken your device. Apple does not support Jailbreaking and as such having done so has voided your warranty and forfeited any support from Apple and by extension these forums. We are not allowed to discuss Jailbroken devices in any way by the Terms of Service of the forum.
You will have to find help elsewhere. Ask the person that installed Cydia to restore the phone.

I installed iOs7 on iPad 2 and now when i'm in iBooks and tap "store" i get a blank screen. Same thing in itunes, itunes u, app store, and a few other apps won't connect. Safari seems to be working fine.

I installed iOs7 on iPad 2 and now when i'm in iBooks and tap "store" i get a blank screen. Same thing in itunes, itunes u, app store, and a few other apps won't connect. Safari seems to be working fine.

I had this same problem. Tried everything the internet said including a full restore. Which was terrible. Nothing worked until.....go to general...reset....reset all settings.
You had to go back in and reset anything you customized afterwards, however it does not allow the store to load. Thanks!

Few countries bank Account Number is mandatory and for few others it is not

For few countries bank Account Number is mandatory and for few others it is not mandatory in the Payment Transaction Tab in Bank Details of Customer.
My question is that why will anyone not fill bank account number when he has given Bank Key and other details.
Is it related to Payment by other methods , other by Cash.

Hi Ranjeet,
You should ask this question to the person who has information about bank details but not process them.
Yes bank account is related with payment transactions. If you want you can make this field mandatory in customizing;
SPRO-Financial Accounting-Accounts Receivable and Accounts Payable-Customer Accounts-Master Data-Preparations for Creating Customer Master Data-Define Account Groups with Screen Layout (Customers) or Define Screen Layout per Company Code (Customers) or Define Screen Layout per Activity (Customers)
You can also set message F2813 (Enter an account holder) as error in customizing;
SPRO-Financial Accounting-Accounts Receivable and Accounts Payable-Customer Accounts-Master Data-Preparations for Creating Customer Master Data-Change Message Control for Customer Master Data

[svn] 4030: Addressing a few FxAnimateFilter bugs.

Revision: 4030
Author: [email protected]
Date: 2008-11-06 10:54:43 -0800 (Thu, 06 Nov 2008)
Log Message:
Addressing a few FxAnimateFilter bugs.
Doc Notes: None
Bugs: None
Reviewer: Chet
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/FxAnimateFilterInst ance.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/FxAnimateInstance.a s
flex/sdk/trunk/frameworks/projects/flex4/src/mx/filters/ShaderFilter.as

Found a few other bugs

Similar Messages

Maybe you are looking for