Found a problem with transforming Clip Groups

When you select a Clip Group in CS6, the "Edit Clipping Path" button is automatically highlighted in the Control Panel. However, if you accept that and try to transform a Clip Group's Clipping Path, the contents get transformed too. If you click on the "Edit Clipping Path" button again, it still happens. The only way around it is to click the "Edit Contents" button and then click the "Edit Clipping Path" again. Just saying.

I'm also having this problem. It used to be in CS5, if you just clicked the "edit clipping path" button (never mind that it is selected by default!!) that would work.
But now, in CS6, yes, you have to click "edit contents" and then "edit clipping path" again.
Adobe, this seems like a bug. Can you fix it?
I use clipping paths constantly and this is slowing me down.

Similar Messages

Keynote conversion: Powerpoint found a problem with content....

Hi all,
MS office is killing me and I'd appreciate any pointers and comments
Here's the situation:
1. Keynote file (multi-revised over the years) exported to powerpoint file XYZ in New-MBP
2. New-MBP opens XYZ and gets "found a problem with content in..."
3. Click on "repair", open up XYZ, and get bunch of blank pages
4. Same XYZ file copied to Old-MBP(freshly installed, now my home media server, not many apps installed).
5. Same version of Office 2011 installed in Old-MBP, opened the file just fine!
(so the problem is not NewMBP Keynote)
6. Created a test account in New-MBP
7. Attempted to open XYZ with Powerpoint
8. Same "found a problem with content in..."
9. Click on "repair", open up XYZ, and get bunch of blank pages
(so the problem is not user/privileges, but the NewMBP system-wide issue?)
10. In New MBP, created a brand new Keynote file, did some light work
11. Exported new keynote file to powerpoint file RRR
12. In New-MBP, RRR opened under Powerpoint 2011 just fine!
(so the problem might be the original multi-modified Keynote file?)
(But its powerpoint file XYZ opened in Old-MBP just fine!)
I've uninstalled and reinstalled Office 2011, with SP1, still cannot open XYZ properly.
I've copied all Office 2011 files from Old-MBP to New MBP, still cannot open XYZ properly.
I"ve googled the problem and tried anything I could find, still cannot open XYZ properly. (deleting presenter notes... etc)
My current conclusion: some kind of software system conflicts in the New-MBP.
Anyone with any ideas?
Thanks a lot in advance.
Will

Hi Will,
Met the same issues and spent hours to find the problem. And guess what ? I found it :-)
For some reason, groups are not supported by Powerpoint converted files.
This is why every slide that contains group is not converted.
The workaround is to ungroup all the groups in your keynote file (alt+cmd+shift+G) and you'll see your slides being converted again.
I'm not sure where the issue is coming from. I would tend to think it should be resolve by the Apple Keynote team.
Not sure whether it has been escalated so far.
There might be some other small issues. One or two slides were not properly converted although they were not containing group, but this should fix most of them.
Have fun degrouping your slides

Document Creation error - "We're sorry. We can't open document name because we found a problem with its contents"

Morning Friends,
I have created a SharePoint 2010 "Site Workflow" that is designed to take information from a form and create a Word doc with the gathered information and store this Word doc in a document library.
I am using Sharepoint 2013 with Office 2013
I understand there are a lot of steps (19) outlined below and I can provide more information as needed but the bottom line is this, workflow successfully takes info from an initiation form, uses the info to create a Word doc. Places this Word doc in a library.
When attempting to open / edit doc, receive error
"We're sorry. We can't open <document name> because we found a problem with its contents"
Details - No error detail available.
Any info or advice would be greatly appreciated.
Very high level view of what I have done:
1 - Created content type called "Letters"
2 - Added site columns " First Name" and "Last Name"
3 - Created and saved to my desktop a very basic Word document (Letter.docx) that says "Hello, my name is XXXX XXXX"
4 - In the advanced settings of the "Letters" content type I uploaded this "Letter.docx" file as the new document template.
5 - Created a new document library called "Letters"
6 - In Library Settings - Advanced Settings, clicked "Yes" to enable the management of content types.
7 - Then I clicked "Add from existing content types" and added the "Letters" content type
8 - Back in the advanced settings of the "Letters" content type I selected "Edit Template" and replaced the first XXXX with the Quick Part "First Name" and the second XXXX with the Quick part "Last Name"
9 - Created a new 2010 Site workflow called "Create a Letter"
10 - To the workflow I added the action "Create List Item"
11 - Configured the action to create Content Type ID "Letters" in the document library "Letter"
12 - For the "Path and Name" I gave it a basic name of "Letter to"
13 - The next step was to create the Initiation Form Parameters and added to form entries "First Name" and "Last Name"
14 - I then linked the initiation form fields to the data source "Workflow Variables and Parameters" to their respective Field from Source parameters
15 - Went back to the "Path and Name" and modified the basic name of "Letter to" to include the first and last name parameters.
16 - Saved - published and ran the work flow.
17 - As expected, Initiation Form prompts for First and Last Name. ("John Doe") Then click "start
18 - Go to document library "Letters" and see a new Word document created titles "Letter to John Doe"
19 - Go to open / edit the Word document and receive the following error
thoughts? Any info or advice would be greatly appreciated.

See this MS support article for SP2010 workflows and generating Word docs:
https://support.microsoft.com/kb/2889634/en-us?wa=wsignin1.0
"This behavior is by design. The Create
List Item action in the SharePoint
2010 Workflow platform can't convert Word content type file templates to the correct .docx format."
I've had success in using SP 2013, Word 2013 (saving a .docx as the template instead of .dotx for the document library content type), and an SP 2010 workflow using SP Designer 2013.

Problem with transforming coordinate systems

Hiho,
i've got a problem with transforming coordinate systems.
When I'm trying to transform a sdo_geometry object to another coordinate sytem and then back to the old system, the coordinates are not the same.
Here's an example:
StartSystem SRID is 8220 (Longitude / Latitude (DHDN))
TargetSystem SRID is 8307 (Longitude / Latitude (WGS84))
Original object:
Polygon: {ExteriorRing: LineString: { (0.0, -90.0) (1.5, 0.0) (0.0, 90.0) (4.5, 0.0) (0.0, -90.0)} }
Transformed object:
Polygon: {ExteriorRing: LineString: { (0.0, -5156.620156177403) (85.94366926962347, 0.0) (0.0, 5156.620156177403) (257.8310078088704, 0.0) (0.0, -5156.620156177403)} }
Transformed back to old system:
Polygon: {ExteriorRing: LineString: { (0.0, -5156.620156177403) (4924.209525017614, 0.0) (0.0, 5156.620156177403) (14772.628575052844, 0.0) (0.0, -5156.620156177403)} }
Any ideas what to do?
Thanks for the help in advance.
Dirk

Hi Dirk
Since the transform you are trying to do is just a datum conversion of lat./long. coordinates, even the first transform yields obvious rubbish. What you have provided here does not illustrate how you submitted your polygon to CS_TRANSFORM.
Provide the syntax of your construction of the corresponding SDO_GEOMETRY object and your SQL select statement that gave these results.
Bruce

Two problems with audio clips

Hello,
I'm having two problems with audio clips:
1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip.
2. When I drag an audio clip from the browser into the timeline I don't get any audio, just a series of beeps (and yes, my audio media is on-line -- I can listen to it in the viewer, just not the timeline).
What am I doing wrong?
Thanks.

1. Drag the little hand on speaker icon to drag from
the Viewer...
Thanks! (Does it actually say that in the documentation anywhere? I try to RTFM, but the FM seems to be a little, er, mute on this point.)
2. It means your sequence settings don't match the
properties of the source audio you're putting in it,
and you either need to change the settings in the
sequence, or render the audio.
Ah, that would explain it. Thanks!

Problem with showing a group of records in dynamic page (PLS-00428 error)

Hi
I have problems with viewing a group of records from db. I've created Page, which "Page Type" attribute is "PL/SQL". In "PL/SQL Code" field, I've written very simple SQL query: "SELECT * FROM PORTAL_DEMO.EMP ;"
I'd like to generate HTML table with it's result. Unfortunately, every time I get the same Exception:
Error 30584: DBMS_SQL has raised an unhandled exception. ORA-06550: line 1, column 7: PLS-00428: an INTO clause is expected in this SELECT statement
Is it necessary to write a COURSOR (and use HTP function) to realize this functionality? I succeed, trying this way - but it is very uncomfortable ( a lot of code ).
What I have done in wrong way?
Please help me.
Best regards
Mario

How do I handle this?

I think I found a problem with the calculator application.

I'm a south korean highschool student and I think I found a problem with calculator application. I use iPod touch 4th generation with iOS 5.0.1. I was playing with calculator app and I found out that 0.1!(factorial) is 0.951350769866873. This can't be right bacause factorial calculation can only be definrd whan n is natural number or 0(in n!). I want apple to correct this error.
And if you are someone working with apple, please let me know the algorithm of factorial calculation(if possible). I would be grateful if I can have a chance to study the algorithm and find out what made 0.1! possible.
so question.
do anybody know how to send an email to apple? I tried but I couldn't find the address.

Apple doesn't dialogue with users via email the way you want, but you can report such problems to them via
http://www.apple.com/feedback/
But in this particular case you should be aware that factorial can in fact be done for non-integers:
http://en.wikipedia.org/wiki/Factorial#Extension_of_factorial_to_non-integer_val ues_of_argument

Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is

Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is plugged into itunes. Can't even restore it. I get Error 1415?

Hi clarity,
Welcome to Apple Support Communities.
You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
Best,
Jeremy

Lync 2013 I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second Anybody out there having similar problems with call pickup Groups?

HI
I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second
Anybody out there having similar problems with call pickup Groups?

Hi,
Did you meet any other call delay when you using Lync?
As the issue happen for Lync desktop client, it can be performance issue. Please check if there is any error message from FE Server when the issue happen.
Also please check if you have updated Lync Server to the latest version, if not, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Problems with transformation; infoobject not updated in DSO.

Hi all,
We are having some problems with one of our transformations between PSA and DSO.
Suddenly some of the fields are not filled in the DSO. The mapping for field Sales order number worked fine, and then I added an infoObject in the DSO to hold the info for Sales order item. I also replaced the infoobject that was supposed to hold the sales order number. After this, none of the two fields has any data in DSO. I checked the PSA, and the data is available here. I tested the rule in Rule details and for sales order number it gives the correct result, but for sales order item it gives a runtime error; assertion failed. I checked on SAP Notes, and found 929934. But the corrections are already added in our system.
Has anyone got any ideas on what to do?
BR,
Linda

Hi,
There are a number of problems in Transformation when either a source field or target field is changed.
This can lead to inconsistent transformation.
You can raise a message to SAP or best thing is if possible delete the Transformation and create a new one.
Regards,
Nitin

ACS 5.3 Authorization problem with using Identity Groups in Access Policy Rule

Hello guys, I am found a problem which I can't solve regarding authorization with using Identity Groups in Access Policy rule.
ACS version: 5.3.0.40.6 (internal build B.839)
I have very simple RADIUS Authorization rule which authorize user on behalf of right Identity Group.
Requested Identity Group exist
Testing user is created in Internal Users and has assigned requested Identity Group
Radius Access Policy:
Authentication against Identity Store Sequence, where authorization server is external RSA SecurID device and additional attributes retrieval is configured from Internal Users.
Authorization is very simple – One Rule with only one Condition which is: Identity Group - in - Requested_Testing_Rule. Then Default rule is set to Deny.
When I will try login with my testing user then authentication against RSA SecurID is OK, but authorization will be denied by Default rule – It looks like my Rule with Identity Group is totally omitted.
I am managing several other ACS servers (version 5.3 but with older patches) where similar rules are working without problem.
What I am tested:
Remove testing user and create his account again.
Rename Identity Group
Use another Identity Group
Remove Access Policy rule and create it again
Use Compound Condition: System:Identity Group
Use Compound Condition: System:UserID instead of Identity Group in Rule (it is working without problem)
Do you have any idea where problem can be?

OK guys, it started working yesterday without any configuration change. Maybe it was some database inconsistence wich was solved by ACS itself.

Bluetooth File Transfer Problem with Video Clips -...

Hello!
I am posting this problem even though a similar one is claimed to be solved ...
I have a similar Problem with BT video clip file transfer in my E5-00 as someone had earlier with music files (SW up to date). Except that in this case the files are unique video clips received from one of the latest Samsung Android phones via Bluetooth (don't ask me which format).
Tried the obvious first, using Windows File Manager over USB. Even Windows Search could not locate the files, not even using wildcards.
Also tried using Ovi Suite Syncronisation, but the files did not appear in either Photos/Videos or Messages (even though the files are in the SMS Inbox - does not make sense why).
The problem in applying the solution approach presented here for Music seems to be that the files cannot be played at all in my E5-00's. Therefore I don't get as far as to the menu where the E5 would ask whether or not the files should be saved or not.
So far I have not been able to connect to an old bluetooth laptop (Windows XP) so that the Bluetooth Exchange would connect let alone seen whether the BTexchange works in this case or not.
Is there any other chance of getting to the files through the directory structure? If so, please give me the (Windows) directory path? Any other advice than switching to Android?

Unfortunately I have reached an impasse. If I touch a video clip (in organizer) the system crashes. I mean locked up cold. I'm not sure what has caused this but I do know that I will not be able to communicate correctly or sufficiently with you in order for you to help me out.
I've found PS and Premier to be very difficult to work with. Very, very frustrating. Photography, both still and video, is not as enjoyable as it once was.
Again, I very much appreciate your initial help and if I get to a point where I've improved my situation ... I'll reach out again. Thanks

Problems with movie clips in time line-program keeps quiting

Not sure if I love this new iMovie version. I have imported many clips with my Sony Digital Hi 8. No problem with past versions. Everything went good until trying to put the clips into the time line. Everytime I try working with the time line and the imported movie clips the program quits...every time. Is this normal. Its getting pretty frusterating.
Thanks for any help.
Shane

I feel your pain in that the same things are happening to us. My wife is trying to edit many video clips imported from a Panasonic PV - GS39. iMovie crashes constantly when trying to work with this particular project. I have successfully edited a project that consisted of mainly still pics with only a few short video clips thrown in. I've tried many of the suggestions from this discussion group (QT plugs, trashing prefs, etc...) with no success. I'll keep trying for a solution though.

Problems with transforming special characters

Hi,
I develop a small educational application ( http://sourceforge.net/projects/pauker/ ). I work with JDK-1.4.0 on Mandrake Linux 8.2. At first I used serialized objects to save the lessons to a file. This worked well until I wanted to change some public members of the involved classes. That's why I switched over to the new and shiny XML. Now I have a different problem!
Pauker saves its lessons in gziped XML files. Users from all over the world can create lessons containing very different characters. There are European characters like �� and asian characters. Loading this lessons on a system with a different encoding works fine. Saving such a lesson on a system with a different encoding can destroy the lesson.
Example:
On a german system a user creates a lesson with the letter � on a card side and saves it. A different user working on an english system loads this lesson. The character "�" is displayed correctly. The english user saves the lesson. The character "�" will be replaced by a question mark in the xml file. Next time the english user loads the lesson she will not see "�" but "?" on the display.
Here is a little example program that does the transformation in exactly the way Pauker does. Please test it out.
import java.io.*;
import javax.xml.parsers.*;
import javax.xml.transform.*;
import javax.xml.transform.dom.*;
import javax.xml.transform.stream.*;
import org.w3c.dom.*;
public class XMLTest {
public XMLTest() {
try {
// create document
DocumentBuilderFactory documentBuilderFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder documentBuilder = documentBuilderFactory.newDocumentBuilder();
Document document = documentBuilder.newDocument();
// fill document
Element element = document.createElement("Element");
document.appendChild(element);
element.appendChild(document.createTextNode("��"));
// transform to XML
TransformerFactory transformerFactory = TransformerFactory.newInstance();
Transformer transformer = transformerFactory.newTransformer();
//transformer.setOutputProperty(OutputKeys.ENCODING, "ISO-8859-1");
transformer.setOutputProperty(OutputKeys.INDENT, "yes");
transformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "2");
DOMSource source = new DOMSource(document);
ByteArrayOutputStream outputStream = new ByteArrayOutputStream();
StreamResult result = new StreamResult(outputStream);
transformer.transform(source, result);
System.out.println("original: ��");
System.out.println(outputStream.toString());
} catch (Exception e) {
e.printStackTrace();
System.out.println();
public static void main(String[] args) {
new XMLTest();
So what do I have to do to fix this problem? I have a lot of new features waiting in the CVS but this bug is still open and discussed. I dont want to release a new version with such a gaping hole in it...
Thanks a lot!
If you prefer to reply peronally, please use Ronny.Standtke at gmx.de

I don't see how you can say that there's a problem with saving your XML files when the code you post doesn't actually save it to a file. Your transform is being written to a ByteArrayOutputStream, which isn't used except for this statement which I assume is for debugging:System.out.println(outputStream.toString());Of course that is useless for debugging the problem you describe, for two reasons:
1. the toString() method uses your system's default encoding, which may be ISO-8859-1 but is definitely not UTF-8. You could write toString("UTF-8") but that is a waste of time because:
2. You use System.out.println() to examine the data, which writes it to a console that also probably does not use UTF-8. I don't know what encoding it does use, but UTF-8 is unlikely.
So, save your files using the UTF-8 encoding as robadmin suggested. And to test the result, make sure you use a tool that understands the UTF-8 encoding.

Frustrating audio sync problem with MJPG clips!

I make short films from our family trips, using the jpg:s and mjpg clips made with our Canon compact digital camera. This has worked fine (since PE 2). Now I often get a frustrating audio problem on SOME of the MJPG:s, SOMETIMES.
When I play the clip in PE7, after 0.5 - 1 sec the audio jumps back to start, before it continues to the end along with the video. This makes the audio out of sync with the video (lagging 0,5 – 1 seconds).
The only way to fix this is to separate the audio track from the video, cut the start of the audio (to where it jumps back to the start) and then move the audio track to make it in sync. Besides being a tedious way to do on all clips, the audio track is not possible to extend “in the other end”, so I have to cut the video at the end as well…
However, this is not happing on all MJPG clips but only on some.
Also, the clip looks fine in other programs, e.g. wmp or windows movie maker.
I have tried other MJPG decoders but that does not make any difference (so it’s obviously no problem with the video). The audio is PCM Audio 44100Hz, 706 kb/s mono.
Now, when I tried repairing the PE7 installation, updating DirectX, removing all caches in the project directory, rebooting, it worked! The clip I was testing was in sync!
But, the next day I noticed the sync problem again on a lot of other clips… I then thought I should try to force PE to reanalyze the video again, so I remove the cache-directories (did not help) and moved the project file to another directory (this did not help, but on the other hand, I didn’t see PE7 analyzing the video again, so maybe there is a cache somewhere else??)
I noticed (looking at properties on the clip in the preview window in PE7), that the original audio is 44100Hz mono, but PE7 converts it to 48000Hz mono. Don’t know if there is some problem there, but it should not be any difference on different clips from the same source… (and the “jump back” in audio is 0,5-1 seconds regardless of clip length, and not the 9% that the difference in frequency would suggest + the audio plays in “normal speed”).
I’ve run out of ideas!!
Please, does anybody have any constructive ideas or tips on what to try? Are there more caches to clear? Are there conflicts with another program, like wmp?
(I use PE 7.0 on a 4Gb, quadcore system running Windows Vista Home Premium 64 bit.)
// G

Thanks, I suppose I can start batch-converting my mjpg movies before importing them inte PE7, if that would make this problem disappear. I'll try that (I have FormatFactory installed, but VirtualDub seems like a nice tool if that is better), although that would make the process a bit more long-winded...
Regarding GSPOT info on a file that works and one doesn't, there are typically no difference between them (except length and content, of course). In fact, as I mentioned above, the same movie did not work until I did some reinstalling, clearing caches etc. Then the same movie suddenly worked OK again.
I attach the GSPOT info on that file.
(I never had this problem on my older XP system that run PE2...).
I will try converting to see if the problem disappears.
Thanks!
// G

Found a problem with transforming Clip Groups

Similar Messages

Maybe you are looking for