Found a site in "history" frm 3/7/2014 and double clicked to see it--now it "removed" that site from the 3/12 history, need that listing back

Found a site in "history" from 3/7/2014 and double clicked on it to insure it was the correct site I was searching for--now it "removed" that site from the 3/7/2014 history and its only listing is this morning; I need that listing of the original visit back in my history so I can prove I visited it on 3/7.....I can list the number of times it was visited, but I need the listing "back" with the date of when the site was visited ...any help would be appreciated

See:
*[[/questions/931864]] Can I access all dates that a website has been visited?

Similar Messages

  • I had a hard disc failure and had to reload Design suite 6 from disc.  The program is now telling me I have 7 days to register the product or it will quit working.  The serial number is already registered.  It won't connect to the adobe site from the popu

    I had a hard disc failure and had to reload Design suite 6 from disc.  The program is now telling me I have 7 days to register the product or it will quit working.  The serial number is already registered.  It won't connect to the adobe site from the popup screen that comes up telling me I only have 7 days to register.  What do I do?

    Go to the Help menu in Photoshop and choose Activate. It should open a wizard allowing you to do this.
    If that fails, Contact Customer Care after clicking on one of the activation links. The more information you give them, the easier it will be for them to help you.
    Gene

  • How do I remove speed dating sites from the computer?

    i would like to remove speed dating sites from the computer. how can i do this?

    Probably caused by Malware on your PC.
    Install, update, and run these programs in this order. They are listed in order of efficacy.<br />'''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' <br />These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have.<br />
    ''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
    Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] <br />
    SuperAntispyware - [http://www.superantispyware.com/] <br />
    AdAware - [http://www.lavasoftusa.com/software/adaware/] <br />
    Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] <br />
    Windows Defender: Home Page - [http://windows.microsoft.com/en-US/windows7/products/features/windows-defender]<br />
    Also, if you have a search engine re-direct problem, see this:<br />
    http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
    If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: <br />
    [http://www.spywarewarrior.com/index.php] <br />
    [http://forum.aumha.org/] <br />
    [http://www.spywareinfoforum.com/] <br />
    [http://bleepingcomputer.com]

  • Removing bookmarked sites from the Start Screen

    I use to be able to hold my thumb on a bookmarked site on my Start Screen and a menu would pop up giving me the option to remove it from the Start Screen. Since upgrading I can't do that. So how do I remove a bookmarked site from the Start Screen?

    Which start screen (URL) are you referring to?
    Is this the about:newtab page that shows the thumbnail of most visited websites?
    See this article about the New Tab page (about:newtab):
    *https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I wish to remove "Show sidebar" and "Show Top Sites" from the Favorites Bar in Safari 7.0. How may I do so?

    I wish to remove "Show sidebar" and "Show Top Sites" from the Favorites Bar in Safari 7.0. How may I do so?

    I aggree It's rather annoying that you can't remove these features when like me you never use them, however by far the most annoying part of this is that when you go into 'Customize Toolbar' you can actually add yet a second 'Show Top Sites' feature to the toolbar !! Even those people who actually want to use this feature don't require two of them. For crying-out-loud come on Apple, this has to be a joke right?!?

  • How can I transfer ONE website out of 11 to my client without deleting my live sites from the internet?

    Aparently, in order give ONE website out of my 11 webites to my client
    I have to...
    1. copy ALL my files (11 live websites)
    2. DELETE all but his
    3. PROBLEM is, they DELETE from the internet
    4. then I have to re-upload all the sites again???
    this sounds scary!
    ....who programs Iweb anyway...(i'm serious, I would love to talk to them)
    Is there not a more stable solution to giving one of the sites I have made to my
    client WITHOUT having to DELETE ALL my live sites from the  internet and then HOPE
    that I can upload them all agiain with no problems???
    thanks, Trinity

    Header 1
    Header 2
    GGGGGGGGGG FSDL;K
    HELP!!!!!!!!!!!!!!

  • I recently restored my iPad and had a film on it, now when I go to sync the film cannot be found. how do i recover the film without purchasing it again?

    I recently restored my iPad and had a film on it, now when I go to sync the film cannot be found. how do i recover the film without purchasing it again?

    You can't recover it withou buying it again. You should be backing up purchased films in iTunes on your computer. iCloud does not work with purchased films. Apple does not have the rights from the movie studios to allow for them to let you download it again for free.

  • Access to a site from the Internet not working, but is for other sites on the same SP

    Greetings,
    My environment:
    SP 2013 Enterprise w/ SP1 installed
    2 servers in the farm, 1 for SQL, 1 for SP
    Both servers are VMs running on Hyper-V, SQL is a bit underpowered when it comes to memory, SP is fine
    5 web applications running, including a MySites web app and Central Admin (I've seen where separate web apps isn't the recommended configuration any more, but, this is how it was done when setup)
    All sites run using SSL (443), same NIC, using host headers, pretty standard stuff (I think)
    Claims authentication on all but Central Admin
    Central Admin is firewalled off to all but a select few
    1 to 1 correspondence between web apps and content databases
    Other than MySites, all sites have either 1 or 2 site collections (search is in a separate site collection on 2 of the sites); MySites has many more site collections
    So, site A, site B, site C, and site M are all supposed to be available from the Internet (with SSL and authentication) and also from the internal network. For site A, C, and M, this is true, no problem. Site B however doesn't work when coming in from the
    Internet, just internally. I've received multiple reports of this from some of my users around the country, and I've been able to replicate it on my computers.
    IIS just gives a blank page, no messages, no login. Chrome does present a login box, and will log into the site and work. This is from a laptop that is a part of our domain with cached credentials, but not directly connected to our network or using
    our VPN. A non-domain laptop without cached credentials prompts me to login, as it should, and seems to work. The domain laptop will use the cached credentials to auto-authenticate to A, C, and M, but not B.
    I'm using IE 11. I've tried putting the site into Compatibility mode, no joy. I've added the site to the Trusted Sites list, no joy. I don't have IE 10 available for testing (or 9 or 8 or ... just 11 :-(  ) I've flushed the browser cache, emptied the
    cookies, etc.
    So, 3 of 4 sites work fine on the same machine, same Internet connection, same browser, same SP. I'm thinking it's something with IE, but, what? Seems like IE should be sending the same creds to all the sites, as they're all in the same Internet domain.
    Does IE or Windows cache different creds somewhere? Or is there something in SP? I could see where one person's settings could get hosed somehow, but numerous people around the country with different h/w, different Internet connections, different credentials?
    ARGH! HELP!!! Point me at something to look at, because I'm drawing a blank (and getting permanent dents in my forehead from banging it on my keyboard)...
    Thanks much,
    Steven

    It seems that the difference between the sites that will open and the one that won't is the Default Authentication provider is set to NTLM on those that open, and Negotiate (Kerberos) on the one that won't. The Authentication Provider for the Default zone
    is Claims Based Authentication on all the sites, just site B (which won't open) is set to Negotiate (Kerberos), the others are set to NTLM.
    Short term: can I change the provider to NTLM without destroying the site?
    Long term: point me in the direction for setting up Kerberos correctly on my server/farm, as from what I can tell Kerberos is the recommended path forward. I'll setup a non-production test site and get it figured out.
    Thanks much.
    Steven

  • How to delete the Sites from the SAp

    Hi All,
    i am working in SAP IS-Retails, there are some problem in our system. i want to delete the site code from the system. because the are so many sites are created wrongly.
    << Moderator message - Everyone's problem is important >>
    Edited by: Rob Burbank on Oct 26, 2010 3:28 PM

    Hi
    Check in WB02 T code
    regards
    Prashanth

  • How can I add a trusted site in Safari to access our secure Sharepoint site from the internet?

    My company has a secure sharepoint site that we access from the internet that requires our Active Directory logon. The Safari on the iPad does not allow you to add the URL as a trusted site and thus it prompts you for your username and password multiple times when navigating to various content.  The solution for full blown browsers is to just add the URL as a trusted site in your browser security settings.  Is there a work around for this or will Apple perhaps add this capability to add trusted sites to the mobile version of Safari?

    Non-Windows browsers do not have a concept of a "trusted" site. In Windows, IE and Chrome do not repeatedly prompt for credentials because they use the user's login credentials on the desktop. Other devices do not have this capability. Instead,
    you need to use something like ADFS to authenticate users.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How do I roll up tasks from different sites in the same collection into one task list that can be overlayed onto a calendar or a timeline?

    I am working on how to make an aggragate list that I would like to overlay to a calendar, or add to a timeline.  There are more than 20 different project sites that have task lists.  I created a custom content type for a task list that adds the
    column "Major Milestone."  I would like to take all tasks that are marked as Major Milestone and have them be displayed on a calendar or timeline on the parent site that sums up all of the Major Milestones in the child sites.
    How should I go about doing this? ... and thanks in advance!

    Thank you for your responce. I used a content query wp to rollup only the Major Milestones, but am unable to overlay the results to a calendar.. The link you provided is for overlaying different task lists onto a calendar, but does not detail how to
    overlay the results from the content query onto a calendar.

  • Fire fox starts by it self and goes to search site all the time please help or it is back to Internet explorer

    fire fox starts by it self and goes to search site all the time please help

    Possible malware infection
    Do a malware check with some malware scanning programs.
    You need to scan with all programs because each program detects different malware.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free

  • If you right-click an image you can select to "Block Images" from the site, but how do you reverse this choice?

    If you right-click an image on a web page you can select to
    "Block Images from [the url of the site]".
    This works well, particularly to make the page printer-friendly, but how do you reverse this choice to see the images again?

    You can see all permissions for the current page in Tools > Page Info > Permissions
    If it is from a different domain then use this:
    *A way to see which images are blocked is to click the favicon (<i>Site Identification</i> icon) on the left side of the location bar.
    *A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
    *Open the <i>Media</i> tab of the "Page Info" window.
    *Select the first image and scroll down though the list with the Down arrow key.
    *If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

  • Import previous iweb site from the internet? No old iweb files

    My mac crashed and I lost all the information I had stored in it, including the iweb files of the blog I created using Iweb. Is there a way to import my iweb blog into a new Iweb in the mac I purchased? The iweb site I created is still up, so I am wondering if I can import the entries from my old iweb blog into my new mac/iweb using RSS or some other mechanism to capture the text and pictures in my old iweb blog and transfer them to my new mac. I also use idisk, so when I log in to mobile me I see links to my old iweb blog under if I click on Idisk and then go to "site". Any ideas about how I can import my old iweb blog from the internet?
    The iweb version I have in my new mac is Iweb 3.0.3 (501)

    Jorge ~ Welcome to the Support Communities. Apple says:
    "iWeb stores everything in a Domain file, normally located in the ~/Library/Application Support/iWeb folder (although it can be moved). If you no longer have this file, you can view your currently published pages and manually recreate them within iWeb, but there is no way to import published pages back into iWeb. You can manually back up the Domain file, or use Backup to back it up.” (Source)
    ...If you don't have a backup of your Domain file (e.g. via Time Machine), paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
    http://iwebfaq.org/site/iWeb_Backup_retrieve.html

  • When I double click on a song in my iTunes Library i receive the following: the song "....." could not be used because the original file could not be found. Would you like to locate it?

    Greetings all
    When i double click on a song in my iTunes library the following appears:
    The song "......" could not be used because the original file could not be found. Would you like to locate it?
    Hope you can help
    revds

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes.
    tt2

Maybe you are looking for

  • What size external hard drive do i need to backup my macbook pro?

    I know I need to backup my computer, especially since I have been experiencing some problems with it and will need to take it into a store to get looked at, but I do not know what size external hard drive I need to back my computer on.

  • How can i get the address with drag and drop from address book into pages?

    I want to creat a letter withe the new pages. Normaly it was possible to put the adress from the adressbook with drag and drop into the letter. So it was possible to create one letter with many different adresses. But now I didn't find this function

  • Apple remote pairing problems

    Now, to the absolute best of my ability I have scoured the internet for a solution and coming up short. I have recently purchased a standard apple remote to use with my Macbook and am getting no where. I have followed every possible combination with

  • Run EXE from JAVA program

    Does somebody know whether it is possible to run some program with extension EXE from JAVA program?

  • Agent Monitoring

    I have uCCX 8.5.1.10000 installed on a MCS7845 with premium agent licenses.  It akes approximately 3 minutes to login.  CAD seems to take almost 2 minutes trying to "initialize agent monitoring".  Does anyone have any ideas as to what to look for?