Found error while Deploying office 365 through SCCM.
Hello Experts,
We are currently working to deploy office 365 through SCCM but on client system it failed to installed.
found error in AppEnforce.log file.
Please help to resolved the error.
ConfigMgr is doing it's job and trying to install the application. However the installation times out after an hour.
See:
Waiting for process 5820 to finish.
That would suggest to me that there is something wrong with your installation parameters. The installation is probably not fully silent and is awaiting user input (that you cannot see).
Narcoticoo's advice is good. Try to install the app silently manually. Until you can do this successfully ConfigMgr will not be able to deploy it.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
Similar Messages
-
Error while deploying EAR file through SDM
Hi All,
I am deploying EAR file through SDM. Its taking too much time to deploy in the 3rd stage (its just a simple hello file for testing purpose and its still in that stage for 2 hours).
When I see the log, I can see some fata error. Please suggest me what should I do.
==
Oct 15, 2008 4:31:44 PM Info: SDM started successfully.
Oct 15, 2008 4:33:21 PM Info: Opened client connection to sapretail (IP address
sapretail/172.20.177.203, remote port 58645)
Oct 15, 2008 4:33:23 PM Info: Request for Logon as admin accepted
Oct 15, 2008 4:39:07 PM Info: Loading archive '/usr/sap/trans/EPS/sap.comwdtu
torial~ex1.ear'
Oct 15, 2008 4:40:50 PM Info: Actions per selected component:
Oct 15, 2008 4:40:50 PM Info: Initial deployment: Selected development componen
t 'wd/tutorial/ex1'/'sap.com'/'LOKAL'/'0.2008.10.14.12.51.57' will be deployed.
Oct 15, 2008 4:44:41 PM Info: Saved current Engine state.
Oct 15, 2008 4:44:48 PM Fatal: State BeforeNextDeployment can't process event I
nitiateDeployment
The reason I am doing through SDM because while deploying through NWDS its throwing an error
Oct 13, 2008 12:44:41 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : sapretail
SDM port : 50118
URL to deploy : file:/C:/DOCUME1/231477/LOCALS1/Temp/temp41002sap.comwdtutorial~ex1.ear
Deployment exception : Server sapretail did not accept login request as admin on port 50118. Details: ERROR: Could not establish connection to server sapretail at port 50118: sapretail
Inner exception was :
Server sapretail did not accept login request as admin on port 50118. Details: ERROR: Could not establish connection to server sapretail at port 50118: sapretail
Please suggest a solution.
Regards,
JitenderNow, when I deploy through NWDS, I get the following error.
Result
=> deployment aborted : file:/C:/DOCUME1/231477/LOCALS1/Temp/temp51346sap.comwdtutorial~ex1.ear
Aborted: development component 'wd/tutorial/ex1'/'sap.com'/'LOKAL'/'0.2008.10.15.21.04.16':Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [sapretail] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Cannot authenticate the user.] (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted -
No Data Source found error while deploying J2EE application
hi
i am new to Oracle9ias. I was going through the Oracle by Example tutorial available on the site. There i followed the steps to deploy a sample J2EE application. Acc to it i first created the datasource and then tried to deploy the application. But i am getting "datasource not found" error. I am totally unaware of the possible cause of this. The error in specific is as follows
Deployment failed: Nested exception Root Cause: No DataSource found at jdbc/hrDS. No DataSource found at jdbc/hrDS
Please help
thanks
nitinDocument is outdated & for now could you please follow http://dev.day.com/content/kb/home/cq5/Development/HowToConfigureSlingDatasource.html
-
Deploying Office 365 through TS
I've posted over to the Office 365 forum but didn't get much luck so I thought I would come over here.
I'm really struggling to deploy the Office 365 installation. In fact, I'm having a hard time getting it installed full stop.
So the process I have followed is:
Download the Office Deployment Tool
Run the deployment too (which extracts setup.exe and a template for the XML file)
Modify the XML file to:
<Configuration>
<Add SourcePath="" OfficeClientEdition="32" >
<Product ID="O365ProPlusRetail">
<Language ID="en-us" />
</Product>
</Add>
<Display Level="None" AcceptEULA="TRUE" />
<Logging Name="OfficeSetup.txt" Path="%temp%" />
</Configuration>
4. I've then run the setup.exe /download configuration.xml - this seems to download some files (about 1GB worth)
5. I then copy this entire folder to the C:\ of a fresh build and run 'setup.exe /configure configuration.xml'
This fails with an error in the log of:
C2R Client returned failing error code 17002
I've tried to deploy over the network form a share with 'Everyone' access and the same result.
At this point I have no idea whats going on, does anyone have this working?Thanks for the reply, I sorted it though.
The XML file should def be the same (depending on your requirements).
The issue I had was that I wasn't specifying the 'UPDATES' section at all, so it was causing it to fail. I specifically added a 'FALSE' setting to the updates and it is now working.
For some reason I just expected it would default to 'FALSE' if not defined, but I guess I was wrong.
Anyway, for future Googler's here is my working XML file:
<Configuration>
<Add SourcePath="" OfficeClientEdition="32" >
<Product ID="O365ProPlusRetail">
<Language ID="en-us" />
</Product>
</Add>
<Updates Enabled="FALSE" UpdatePath="" />
<Display Level="None" AcceptEULA="TRUE" />
<Logging Path="%temp%" />
<Property Name="AUTOACTIVATE" Value="1" />
</Configuration>
This XML will download and install from the same location as the setup.exe file. -
Error while deploying mobile components through SDM
Hi,
I have installed MI system in my landscape and i have deployed few MI related components through SDM
Components are:
NWMTR.sda
NWMTS.sda
NWMTTREPOSITORY.sda
I got the following error when deployed through SDM
Starting Deployment of MBA-MTR
Aborted: development component 'MBA-MTR'/'sap.com'/'SAP AG'/'200600'/'1':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/MBA-MTR.. Reason: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='<Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='<Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='mcd.xml is incorrect! Header information are missing.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key mcd.xml is incorrect! Header information are missing.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='mcd.xml is incorrect! Header information are missing.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key mcd.xml is incorrect! Header information are missing.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='<Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='mcd.xml is incorrect! Header information are missing.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key mcd.xml is incorrect! Header information are missing.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='mcd.xml is incorrect! Header information are missing.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key mcd.xml is incorrect! Header information are missing.; nested exception is: com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='<Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='<Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='mcd.xml is incorrect! Header information are missing.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key mcd.xml is incorrect! Header information are missing.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='mcd.xml is incorrect! Header information are missing.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key mcd.xml is incorrect! Header information are missing.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='<Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='mcd.xml is incorrect! Header information are missing.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key mcd.xml is incorrect! Header information are missing.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='mcd.xml is incorrect! Header information are missing.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key mcd.xml is incorrect! Header information are missing.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Please suggest me to go further.
Regards,
jagadishHi Jagadish
The main reason for the deployment to fail is the following error message "mcd.xml is incorrect! Header information are missing". Hence can i know if you have modified or removfed any attributes of the standard mcd xml file that is present in the application zip file. If this you have not modified the xml file, then can you please check if you have downloaded the correct sda files from SAP service market place. Note that the version of MTR, MTS etc are different for MI 7.0 and Mobile 7.1. If you are using MI 7.0 server then kindly download application that is compatible with MI 7.0 only. Please try and let me know.
Best Regards
Sivakumar -
Error while Connecting Office 365/SharePoint online
Hi,
I'm trying to connect Office 365 from my local and when the execute query runs, it returns an error "For security reasons DTD is prohibited in this XML document. To enable DTD processing set the DtdProcessing property on XmlReaderSettings to
Parse and pass the settings into XmlReader.Create method." Can anyone pls help ?
var securePassword = new SecureString();
foreach (char c in password)
securePassword.AppendChar(c);
var onlineCredentials = new SharePointOnlineCredentials(login, securePassword);
using (ClientContext clientContext = new ClientContext(targetSite))
clientContext.Credentials = onlineCredentials;
Web web = clientContext.Web;
clientContext.Load(web,
webSite => webSite.Title);
clientContext.ExecuteQuery();
Console.WriteLine(web.Title);
Console.Read();
return clientContext;
Thanks
Rajdeep
rajdeepHi,
According to your post, my understanding is that you had an issue to connect to the SharePoint online.
I had tested with your code, and it worked well as below.
Did your project contain other code? Such as parse the XML file?
You can create a new clean project to check with it works.
More reference:
http://stackoverflow.com/questions/215854/prevent-dtd-download-when-parsing-xml
http://stackoverflow.com/questions/13854068/dtd-prohibited-in-xml-document-exception
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Error while deploying the taskproject through jdeveloper- Unable to upload
Hello,
I implemented a sample process with a BPEL and Human task. am not able to deploy the taskproject through jdeveloper. getting the below in deployment log
[01:11:57 PM] Wrote Web Application Module to C:\JDeveloper\mywork\VacationRequestHF\VacationRequestTaskFlow\deploy\VacationRequestTaskFlow.war
[01:11:59 PM] Deploying Application...
[01:12:32 PM] Weblogic Server Exception: weblogic.deploy.api.internal.utils.DeployerHelperException: The source 'C:\DOCUME~1\151679\LOCALS~1\Temp\VacationRequestTaskFlow.war' for the application 'VacationRequestTaskFlow' could not be loaded to the server 'http://uxunt460:7101/bea_wls_deployment_internal/DeploymentService'.
Server returned HTTP response code: 500 for URL: http://uxunt460:7101/bea_wls_deployment_internal/DeploymentService
[01:12:32 PM] See server logs or server console for more details.
[01:12:32 PM] weblogic.deploy.api.spi.exceptions.ServerConnectionException: [J2EE Deployment SPI:260041]Unable to upload 'C:\JDeveloper\mywork\VacationRequestHF\VacationRequestTaskFlow\deploy\VacationRequestTaskFlow.war' to 't3://uxunt460:7101'
[01:12:33 PM] #### Deployment incomplete. ####
[01:12:33 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer).
I tried to search in Server logs but no luck not sure whether the way am looking is right or wrong also i dont know where these details are present in server console.
Am a beginner in SOA., so may be thse questions look pretty amateur but help regarding this will be truly appreciated.
Thank You,
BilalHello,
I implemented a sample process with a BPEL and Human task. am not able to deploy the taskproject through jdeveloper. getting the below in deployment log
[01:11:57 PM] Wrote Web Application Module to C:\JDeveloper\mywork\VacationRequestHF\VacationRequestTaskFlow\deploy\VacationRequestTaskFlow.war
[01:11:59 PM] Deploying Application...
[01:12:32 PM] Weblogic Server Exception: weblogic.deploy.api.internal.utils.DeployerHelperException: The source 'C:\DOCUME~1\151679\LOCALS~1\Temp\VacationRequestTaskFlow.war' for the application 'VacationRequestTaskFlow' could not be loaded to the server 'http://uxunt460:7101/bea_wls_deployment_internal/DeploymentService'.
Server returned HTTP response code: 500 for URL: http://uxunt460:7101/bea_wls_deployment_internal/DeploymentService
[01:12:32 PM] See server logs or server console for more details.
[01:12:32 PM] weblogic.deploy.api.spi.exceptions.ServerConnectionException: [J2EE Deployment SPI:260041]Unable to upload 'C:\JDeveloper\mywork\VacationRequestHF\VacationRequestTaskFlow\deploy\VacationRequestTaskFlow.war' to 't3://uxunt460:7101'
[01:12:33 PM] #### Deployment incomplete. ####
[01:12:33 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer).
I tried to search in Server logs but no luck not sure whether the way am looking is right or wrong also i dont know where these details are present in server console.
Am a beginner in SOA., so may be thse questions look pretty amateur but help regarding this will be truly appreciated.
Thank You,
Bilal -
Error while deploying SAR files through SDM
HI,
When i am trying to apply patchesthrough SDM i am getting the following error:
System: ECC 6.0
ERROR:
Starting Deployment of tc/bizc/ws/ear
Aborted: development component 'tc/bizc/ws/ear'/'sap.com'/'MAIN_APL70VAL_C'/'963770':
Error: Caught the following error or exception: "java.lang.NoClassDefFoundError"
Additional error message is:
com/sap/engine/deploy/manager/DeployManagerException
IF some knows the answer for the problem. Please help, points will be rewarded.
Regards,
Magham.Hi Megha,
1.Please check in the composit note whether any other SCA or SDA needs to be deployed before the selected one.
2. Try to deploy it after restarting the J2ee-engine.
3. Download the file again from sapmarket place and try with new one.
If the problem persists then please copy the full exception trace in the post.
Regards,
Satyendra -
Error while deploying .par file through system admin
I have tried to modify logon.par file but when I was try deploy that file again through system admin then I got this error...................
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com.sapportals.portal.ume.component.logon.SAPMLogonComponent.
Exception id: 10:19_11/05/07_0006_13454550
See the details for the exception ID in the log file
Please help me out I am using sneak preview 7.0
Detailed Error Log & Trace
=========================================================
Exception ID:08:55_11/05/07_0002_13454550
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in init method
Component : com.sap.portal.support.browse.default
at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:267)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:312)
at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:385)
at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:435)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:607)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationException: Could not instantiate implementation class com.sapportals.portal.ume.component.logon.SAPMLogonComponent of Portal Component com.sap.portal.support.browse.default because: Could not find implementation class
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:242)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
... 26 more
Caused by: java.lang.ClassNotFoundException: com.sapportals.portal.ume.component.logon.SAPMLogonComponent
Found in negative cache
Loader Info -
ClassLoader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@3389d1]
Parent loader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@1b7a6fa]
References:
not registered!
No resources !
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:360)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:219)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
... 30 moreHi,
Open ur PAR file then double click on PORTAL-INF -> lib->Select 2 jar files
1.com.sap.portal.runtime.logon_api.jar
2.umelogonbase.jar
Copy those jar file & paste in to lib in ur application.
Regards,
Senthil kumar K. -
Deploying Office 2013 through SCCM 2012 SP1 leaves Office 2010 Tools and Sharepoint behind
I apologize in advance, but I have searched similar topics to this, but I haven't seen an answer yet that describes where and how to accomplish this. I'm also a bit new to SCCM and I'm still finding the nuances.
Scenario: Running SCCM 2012 SP1. Office 2013 32bit is added as an application and deployed properly with an accompanied .msp file stored in the source folder. The configuration is to have Office
2010 uninstalled silently. The deployment runs flawless and the user doesn't know otherwise. Success in anyone's book, right?
Except... Office 2010 Tools and SharePoint Workspace 2010 are left over. Manual uninstallation is not an option. This is for hundreds of PC's in several global locations.
I've seen it hinted to write a script. That's fine I suppose, but what do I write, where do I store the script, and can I have SCCM2012 automatically run it before the installation of 2013?
Our favorite IT tool Google hasn't quite returned what I'm looking for. Does anyone here have ideas or perhaps have experienced a similar issue?
Thanks,1st, save the following content as a XML file on a server share, named as "config.xml".
<Configuration Product="ProPlus">
<Display Level="none" CompletionNotice="no" SuppressModal="yes" AcceptEula="yes" />
<Setting Id="SETUP_REBOOT" Value="Never" />
</Configuration>
Run the following script during or before the installation of Office 2013:
"C:\Program Files\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\setup.exe" /uninstall ProPlus /config \\servershare\Config.xml
For more SCCM specific topics, we'd recommend you to visit the SCCM forums at:
http://technet.microsoft.com/en-us/systemcenter/gg191847
Max Meng
TechNet Community Support -
I found the question "Deploy Office 365 pro plus using a network share or from a on-premise locaiton" the most useful of the resources
on MS yet - but I am having difficulties getting the files to download for a local deployment.
The root of the issue, that I cannot find anywhere, is how do I set the shared templates location for users in the organization. First I thought a GPO, but I cannot find that setting in the GPO in MS.
Then I thought modifying the REG- but it is in a binary key which could include other information I may not want modified(Or does it matter?)
Then I looked for ways to download the deployment but launching from an elevated prompt as IT (Domain level) returns a useless error to paraphrase- 'sorry MSOffice didn't install- do you have enough disk space'.
I have downloaded the GPO objects, but not installed them, likely I will need those later though.
Just want to path all the users to a central repository of office/excel/access/outlook templates in addition to their local templates. Concise help in steps or sites that have solved the issue are Greatly appreciated : )Hi,
you can use the GPO ADMX templates to configure the "Workgroup templates path".
This actually configures a registry setting named: "sharedtemplates".
The registry value/type/data is:
HKEY_CURRENT_USER\Software\Policies\Microsoft\office\15.0\common\general
Name: sharedtemplates
Type: REG_EXPAND_SZ (Expandable String Value)
Data: <UNC path to folder>
From the GPO reference workbook/sheet, for Office:
http://social.technet.microsoft.com/wiki/contents/articles/4976.selected-content-relating-to-group-policy-administrative-templates-adm-and-admx.aspx
Filename: office15.admx
Scope: User
Path: Microsoft Office 2013\Shared paths
Policy Setting Name: Workgroup templates path
Supported on: At least Windows Server 2008 R2 or Windows 7
Category: Shared paths
Explain Text: Specifies the location of workgroup templates.
Registry Key: HKCU\software\policies\microsoft\office\15.0\common\general!sharedtemplates
Note: it is supported to populate this setting, with a UNC path, but not with a web path.
e.g.: \\server01\shared\templates <this is valid>
e.g.: http://server01/shared/templates <this is not valid>
This constraint (for web URIs) can be difficult to work around. If you are using SharePoint, and think WebDAV might work, it doesn't seem to work for us :(
Of course, if you have SharePoint, there are much better ways to handle document templates, but, our users are familiar with this File -> New -> from template type of method...
It can also be set manually by a user:
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Error While Deploying the Ear .
HI ,
I am getting an error while deploying my ear through Deploy Tool . the ear get loaded but fails to deploy... the error message i got is pasted below...
It gives error about EJBContainer, but the J2EE Engine's Visual Admin shows the service is runing
Any help is highly appreaciated
Eror Message.....
06/05/13 18:49:09 - ***********************************************************
06/05/13 18:49:10 - Start updating EAR file...
06/05/13 18:49:10 - start-up mode is lazy
06/05/13 18:49:12 - EAR file updated successfully for 2078ms.
06/05/13 18:49:12 - Start deploying ...
06/05/13 18:49:14 - EAR file uploaded to server for 1172ms.
06/05/13 18:49:16 - ERROR: Not deployed. Deploy Service returned ERROR:
java.rmi.RemoteException: Cannot deploy application sap.com/omnidocs_ejb..
Reason: Exception during generation of components of application sap.com/omnidocs_ejb in container EJBContainer.; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application sap.com/omnidocs_ejb in container EJBContainer.
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:554)
at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application sap.com/omnidocs_ejb in container EJBContainer.
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:621)
at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:319)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3139)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:539)
... 10 more
Caused by: java.lang.NoClassDefFoundError: com/newgen/omni/jts/txn/NGOServerInterface
Loader Info -
ClassLoader name: [Deployment:Runtime:sap.com/omnidocs_ejb]
Parent loader name: [Frame ClassLoader]
References:
common:service:http;service:servlet_jsp
service:ejb
common:service:iiop;service:naming;service:p4;service:ts
service:jmsconnector
library:jsse
library:servlet
common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
library:ejb20
library:j2eeca
library:jms
library:opensql
common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore
interface:resourcecontext_api
interface:webservices
interface:cross
interface:ejbserialization
Resources:
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\temp\deploy\1147526354539
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\temp\deploy\1147526354539\omnidocs_ejb.jar
Loading model: {parent,references,local}
The error occurred while trying to load "com.newgen.omni.jts.txn.oracle.docdb.NGOConnectCabinet".
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:389)
at com.sap.engine.services.ejb.deploy.verifier.CheckUtils.loadClass(CheckUtils.java:25)
at com.sap.engine.services.ejb.deploy.verifier.session.SessionBeanCheck.check(SessionBeanCheck.java:42)
at com.sap.engine.services.ejb.deploy.verifier.Verifier.checkBean(Verifier.java:82)
at com.sap.engine.services.ejb.deploy.verifier.Verifier.check(Verifier.java:46)
at com.sap.engine.services.ejb.deploy.DeployAdmin.generate(DeployAdmin.java:253)
at com.sap.engine.services.ejb.EJBAdmin.deploy(EJBAdmin.java:2144)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
... 16 more
For detailed information see the log file of the Deploy Service.
06/05/13 18:49:16 - ***********************************************************
<b></b>Hi
I would suggest you to do the deployment of the EAR using NWDS rather that using deploy tool. for Doing this please follow this link for creating ,building and deplopying as ear using dev studio
http://help.sap.com/saphelp_nw04/helpdata/en/08/51ec41b9a24f4a8359c61ae4a02db1/frameset.htm
Anyways if you ar still tied up using deploy tool pleas cross verify that all the dependent jars (including jars which NgoServerinterface will beusing internally has to be in the classpath . Would be great if you can post the stack trace
hope this helps !<b> please mark points for helpful answers .</b>
regards
rajeshkr -
Error while deploying SOA composite via ant
I am getting following error while deploying SOA composite through ant from SOA server (UNIX).It is unable to get mds configuration.
Jdeveloper is not installed in SOA server.
I am trying to copy the SOA project from local machine to SOA server and trying to deploy from SOA server.
Error
Parse of component type files failed, check the adf-config.xml file : "oracle.fabric.common.FabricException: oracle.mds.config.MDSConfigurationException: MDS-01330: unable to load MDS configuration document
MDS-01329: unable to load element "persistence-config"
MDS-01370: MetadataStore configuration for metadata-store-usage "mstore-usage_1" is invalid.
MDS-00503: The metadata path "/u01/orasoa/Oracle/Middleware/Oracle_SOA1/integration" does not contain any valid directories.
I checked /u01/orasoa/Oracle/Middleware/Oracle_SOA1 directory. Integretion directory is not available.
Am I missing anything?
*Please advise.*
build.propeties
============
# build file for HelloWorldComposite
composite.name=AntScriptDeployPOCService
# revision of the composite
composite.revision=1.0
# Set oracle.home to <JDEV_HOME>/jdeveloper, where <JDEV_HOME> is JDEV # installation directory
#oracle.home=C:/Oracle/Middleware/jdeveloper
oracle.home=/u01/orasoa/Oracle/Middleware/Oracle_SOA1
# soa-server side oracle home directory - needed for deployment plan
# and the weblogic sca library deployment
soa.server.oracle.home=/u01/orasoa/Oracle/Middleware/Oracle_SOA1
###### Deployment server connection information
# the admin server connection information
admin.server.host=10.40.237.106
admin.server.port=7001
# the domain where soa infra is installed
server.domain.name=soa_domain
# connection information for the managed server, used for soa-deployment
managed.server.host=10.40.237.106
managed.server.port=8001
# User and credentials for the servers
server.user=weblogic
server.password=<password>
# wls server where soa is targeted.
server.targets=soa_server1
#local.java.home=C:/Oracle/Middleware/jdk160_14_R27.6.5-32
local.java.home=/u01/orasoa/Oracle/Middleware/jdk160_14_R27.6.5-32
Build.xml
<?xml version="1.0" encoding="UTF-8" ?>
<project name="AntScriptDeployPOCService" default="all">
<!-- build.properties -->
<property file="build.properties"/>
<property name="deploy.dir" value="../deploy"/>
<!-- Add targets here -->
<target name="compile-package">
<property name="sca-inf.classes.dir" value="../SCA-INF/classes"/>
<mkdir dir="${sca-inf.classes.dir}"/>
<ant antfile="${oracle.home}/bin/ant-sca-package.xml" target="package" inheritall="false">
<property name="oracle.home" value="${oracle.home}"/>
<property name="compositeDir" value="${basedir}/../"/>
<!-- needed for adf config -->
<property name="scac.application.home" value="${basedir}/../.."/>
<!-- name of the composite -->
<property name="compositeName" value="${composite.name}"/>
<!-- revision of the composite -->
<property name="revision" value="${composite.revision}"/>
<!-- java.passed.home passed to scac, this property will be
overwritten to the env.JAVA_HOME if such env variable is defined in OS level-->
<property name="java.passed.home" value="${local.java.home}"/>
<!--property name="java.passed.home" value="C:/Oracle/Middleware/jdk160_14_R27.6.5-32"-->
</ant>
</target>
<target name="deploy">
<condition property="deploymentplan.name" value="null">
<not>
<isset property="${deploymentplan.name}"/>
</not>
</condition>
<echo>Deploying to http://${managed.server.host}:${managed.server.port}/soa-infra/deployer</echo>
<ant antfile="${oracle.home}/bin/ant-sca-deploy.xml" target="deploy" inheritall="false">
<!-- reformat of prop names -->
<property name="user" value="${server.user}"/>
<property name="password" value="${server.password}"/>
<!-- create the url for deployment -->
<property name="serverURL" value="http://${managed.server.host}:${managed.server.port}/soa-infra/deployer"/>
<!-- location of the sar -->
<property name="sarLocation" value="${deploy.dir}/sca_${composite.name}_rev${composite.revision}.jar"/>
<!-- force overwrite if already there -->
<property name="overwrite" value="true"/>
<!-- configplan-->
<property name="configplan" value="${deploymentplan.name}"/>
</ant>
</target>
<target name="all" depends="compile-package,deploy"/>
</project>Check whether the adf-config.xml file in your app is having proper mds path similar to this:
<adf-mds-config xmlns="http://xmlns.oracle.com/adf/mds/config">
<mds-config xmlns="http://xmlns.oracle.com/mds/config">
<persistence-config>
<metadata-namespaces>
<namespace metadata-store-usage="mstore-usage_1" path="/soa/shared"/>
</metadata-namespaces>
<metadata-store-usages>
<metadata-store-usage id="mstore-usage_1">
<metadata-store class-name="oracle.mds.persistence.stores.file.FileMetadataStore">
<property value="${oracle.home}/integration"
name="metadata-path"/>
<property value="seed" name="partition-name"/>
</metadata-store>
</metadata-store-usage>
</metadata-store-usages>
</persistence-config>
</mds-config>
</adf-mds-config>
" -
Deploying Office 365 Pro Plus via SCCM
Hi
I am trying to deploy Office 365 Pro Plus via SCCM, I followed this process https://gallery.technet.microsoft.com/How-To-Deploying-Office-70e8b1eb#content , we don't use the application catalogue but I made the application available to be run via system
center.
Though can't get it deployed, I keep getting some errors about checking internet connections ...though I can run the command manually and it'works.
Does anyone managed to install it via SCCM ?Thank you for the reply,
Where I am lost is where it downloads the Office C2R from ?
Logs from the Temp folder
03/04/2015 10:51:15.947 SETUP (0xf10)
0x107c Click-To-Run
anhmm Medium
Prereq::PrereqsFailed: No prereqs have failed.
03/04/2015 10:51:16.228 SETUP (0xf10)
0x107c Click-To-Run
aoh9t Medium
TryLaunchClient::HandleStateAction: Launching OfficeClickToRun.exe with parameters: scenario=unknown acceptalleulas="True" cdnbaseurl="http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675" productreleaseid="none"
displaylevel="False" culture="en-us" baseurl="C:\WINDOWS\ccmcache\5l" lcid="1033" platform="x86" updatesenabled="False" o365proplusretail.excludedapps="access,groove,lync,project,sharepointdesigner,visio"
version="15.0.4675.1003" productstoadd="O365ProPlusRetail_en-us_x-none" trackedduration=280
03/04/2015 11:01:12.393 SETUP (0xf10)
0x107c Click-To-Run
aoh72 Medium
ExitBootStateMachine::HandleStateAction: Bootstrapper workflow exiting with result: 0x0
Logs from SCCM AppEnforce shows this (can't see it failing)
<![LOG[+++ Starting Install enforcement for App DT "Install - Microsoft Office 365 ProPlus" ApplicationDeliveryType - ScopeId_2A03C658-AF66-44B9-85ED-4FADE04A803B/DeploymentType_5a39078c-a7a3-438c-af16-0cb0a0674479, Revision - 7, ContentPath
- C:\WINDOWS\ccmcache\5l, Execution Context - System]LOG]!><time="10:50:45.222-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appprovider.cpp:1702">
<![LOG[ A user is logged on to the system.]LOG]!><time="10:50:45.243-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appprovider.cpp:2083">
<![LOG[ Performing detection of app deployment type Install - Microsoft Office 365 ProPlus(ScopeId_2A03C658-AF66-44B9-85ED-4FADE04A803B/DeploymentType_5a39078c-a7a3-438c-af16-0cb0a0674479, revision 7) for system.]LOG]!><time="10:50:45.247-600"
date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appprovider.cpp:2148">
<![LOG[+++ Application not discovered. [AppDT Id: ScopeId_2A03C658-AF66-44B9-85ED-4FADE04A803B/DeploymentType_5a39078c-a7a3-438c-af16-0cb0a0674479, Revision: 7]]LOG]!><time="10:50:45.287-600" date="03-04-2015" component="AppEnforce"
context="" type="1" thread="5596" file="localapphandler.cpp:291">
<![LOG[ App enforcement environment:
Context: Machine
Command line: Setup.exe /configure Install.xml
Allow user interaction: No
UI mode: 1
User token: null
Session Id: 1
Content path: C:\WINDOWS\ccmcache\5l
Working directory: ]LOG]!><time="10:50:45.288-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appcontext.cpp:85">
<![LOG[ Prepared working directory: C:\WINDOWS\ccmcache\5l]LOG]!><time="10:50:45.290-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appcontext.cpp:189">
<![LOG[ Prepared command line: "C:\WINDOWS\ccmcache\5l\setup.exe" /configure Install.xml]LOG]!><time="10:50:45.340-600" date="03-04-2015" component="AppEnforce" context="" type="1"
thread="5596" file="appcontext.cpp:338">
<![LOG[ Executing Command line: "C:\WINDOWS\ccmcache\5l\setup.exe" /configure Install.xml with user context]LOG]!><time="10:50:45.341-600" date="03-04-2015" component="AppEnforce" context=""
type="1" thread="5596" file="appexcnlib.cpp:201">
<![LOG[ Working directory C:\WINDOWS\ccmcache\5l]LOG]!><time="10:50:45.341-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appexcnlib.cpp:215">
<![LOG[ Post install behavior is BasedOnExitCode]LOG]!><time="10:50:45.529-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appcommon.cpp:1094">
<![LOG[ Waiting for process 3856 to finish. Timeout = 120 minutes.]LOG]!><time="10:50:45.533-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596"
file="appexcnlib.cpp:1958">
<![LOG[ Process 3856 terminated with exitcode: 0]LOG]!><time="11:01:12.428-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appexcnlib.cpp:1967">
<![LOG[ Looking for exit code 0 in exit codes table...]LOG]!><time="11:01:12.429-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appexcnlib.cpp:505">
<![LOG[ Matched exit code 0 to a Success entry in exit codes table.]LOG]!><time="11:01:12.430-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appexcnlib.cpp:584">
<![LOG[ Performing detection of app deployment type Install - Microsoft Office 365 ProPlus(ScopeId_2A03C658-AF66-44B9-85ED-4FADE04A803B/DeploymentType_5a39078c-a7a3-438c-af16-0cb0a0674479, revision 7) for system.]LOG]!><time="11:01:12.621-600"
date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appprovider.cpp:2148">
<![LOG[+++ Application not discovered. [AppDT Id: ScopeId_2A03C658-AF66-44B9-85ED-4FADE04A803B/DeploymentType_5a39078c-a7a3-438c-af16-0cb0a0674479, Revision: 7]]LOG]!><time="11:01:12.739-600" date="03-04-2015" component="AppEnforce"
context="" type="1" thread="5596" file="localapphandler.cpp:291">
<![LOG[++++++ App enforcement completed (627 seconds) for App DT "Install - Microsoft Office 365 ProPlus" [ScopeId_2A03C658-AF66-44B9-85ED-4FADE04A803B/DeploymentType_5a39078c-a7a3-438c-af16-0cb0a0674479], Revision: 7, User
SID: ] ++++++]LOG]!><time="11:01:12.748-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appprovider.cpp:2448"> -
Weblogic Portal: Error While Deploying: VALIDATION PROBLEMS WERE FOUND
Hello friends
I am getting following error while deploying EAR on server.
“Module named 'MyEAR' failed to deploy. See Error Log view for more detail.”
Steps I followed:
1: Created one portal domain successfully and was able to start the serve after thatr.
2: Created one Portal EAR Project and added it on server.
Now when I am restarting the server, getting following error/log
**“weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND**
**problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>”**
Exception stack Trace:
java.lang.Exception: Exception received from deployment driver. See Error Log view for more detail.
at oracle.eclipse.tools.weblogic.server.internal.WlsJ2EEDeploymentHelper$DeploymentProgressListener.watch(WlsJ2EEDeploymentHelper.java:1566)
at oracle.eclipse.tools.weblogic.server.internal.WlsJ2EEDeploymentHelper.deploy(WlsJ2EEDeploymentHelper.java:470)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishWeblogicModules(WeblogicServerBehaviour.java:1346)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishToServer(WeblogicServerBehaviour.java:803)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishOnce(WeblogicServerBehaviour.java:623)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publish(WeblogicServerBehaviour.java:516)
at org.eclipse.wst.server.core.model.ServerBehaviourDelegate.publish(ServerBehaviourDelegate.java:708)
at org.eclipse.wst.server.core.internal.Server.publishImpl(Server.java:2690)
at org.eclipse.wst.server.core.internal.Server$PublishJob.run(Server.java:272)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Caused by: weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND
problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:193)
at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:88)
at weblogic.management.deploy.internal.MBeanConverter.createApplicationForAppDeployment(MBeanConverter.java:66)
at weblogic.management.deploy.internal.MBeanConverter.setupNew81MBean(MBeanConverter.java:314)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.compatibilityProcessor(ActivateOperation.java:81)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.setupPrepare(AbstractOperation.java:295)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:97)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: weblogic.descriptor.DescriptorException: VALIDATION PROBLEMS WERE FOUND
problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:245)
at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:231)
at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:155)
at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:323)
at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:409)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:759)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:768)
at weblogic.application.ApplicationDescriptor.getApplicationDescriptor(ApplicationDescriptor.java:301)
at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:178)
as it is ‘brand new ‘ – IDE generated application, weblogic-application.xml is untouched.
Thanks & RegardsI have seen this problem also. To be clear, this occurs straight out of the box. In other words - launch eclipse, create a new workspace, create a new portal EAR project with the wizard, and then try to deploy it without touching anything. In fact, try changing the portal's facets to anything, plain EAR, 11g default, Portal EAR - it doesn't matter. It will not deploy. Either you get this error or you get deployment errors complaining about missing library references in the weblogic-application.xml. Then - you have to do surgery just to get an 'out of the box' portal to run. Very frustrating.
Maybe you are looking for
-
BAPI CASESERVICE CREATEMULT - Alternative price not allowed for the service
Hi, I am using .Net Connector to connect to BAPI. I am developing a .Net order processing application and intend to send the order information to SAP using BAPI_CASESERVICE_CREATEMULT. However, I keep getting the error message "An alternative price i
-
Session is being lost between GET and POST
My application is being developed in Tomcat 4.1.18. I have a servlet that acts as a Controller and JSP's that make up the View. Basically, the session gets lost in the following manner: The application's web.xml file is set with Authentication method
-
I need to create a Screen Variant and apply to a Z transaction which only allows users access to change MRP Information u2013 MRP1, MRP2, MRP3 and MRP4 tabs. in the Material Master. I do not want to give everyone access to MM02 u2013 Change Material
-
I have a session whith Au instruments. I want export midi file. When I import again exported midi file logic place each regions which stand in one track to many tracks. I have many many tracks thith one region on them. I shood to glue all regions on
-
Immediately after supplying userid/password/database parameters when launching the Oracle Query Builder, the following error message is displayed: OBE-15952: User privilege table not loaded OBE-15950: No Query Builder tables--Database open/save is di