Found longer sync cable!

Since my wife got an iPhone 3G, I've been looking for a longer sync cable. Our main computer is a desktop PC that sits on the floor under my desk. The original 3.3 ft. cable reaches to a front USB port, but that's just asking to be snagged by one of us walking in front of the computer. It won't reach from the top of the desk, to the back of the desk, then to the back of the computer.
My search found some online options, such as http://www.cablejive.com/xlSync. However, I live in Vancouver, BC, Canada, so ordering from the US is a bit of pain.
I tried some USB extension cables I already had, but they sometimes wouldn't work: phone not detected, or sync hangs part way through. Plus, an extension cable just adds another connection that can get messed up.
I've kept looking in local stores and finally found one! The Walmart in Surrey, BC on 88'th Ave has a 6 ft. cable that looks identical to the original, just longer. The brand is Onn, model #ON4016C, and sells for C$10.00. It says it works for both iPod and iPhone. So far, it has worked without fail on my computer.
I hope this helps others in Canada that are looking for a longer sync cable.
Clark.

It's the same as the iPod Touch and latest iPod Nano. I have all three devices and it doesn't matter which cable, the iPhone will charge and sync.

Similar Messages

6ft Sync Cable Or longer

Why does Apple not make a 6ft or longer maybe a 10ft Sync cable for the Touch or Iphone or Ipad?
They sell a Sync docking station, But do they think maybe some people have Desktop Computers on the floor and a 39" cable is not going to reach. Most desktops are 32" tall and you most likely will not reach the top of the desk, or if it does only the edge.
What is so hard about making a long one?
If they do not think people want them, Have they done a search for 6ft Sync cable?

I know there are other vendors that make USB or longer Sync cables. But one problem you run into is most after market docking stations make them to accept a OEM plug from apple, so then you have to get a USB extension cable to extend the limited reach of the Short OEM cable apple makes.
I also have had it show on my Phone that the cable being used is not compatible with Apple, It works most of the time, but every once in awhile it will not accept the connection. If apple wants you to use their cable then make one that is longer than 39 inches and that is my point. If you want to use only your cable than make one that is longer. Say 6ft or 10Ft would be great.

I can no longer sync my iPhone 5 with 8.2 by wi-fi after installing Yosemite 10.10.2 and iTunes12.1.0.50. I can only sync by cable. Any solutions?

I can no longer sync my iPhone 5 with 8.2 by wi-fi after installing Yosemite 10.10.2 and iTunes12.1.0.50. I can only sync by cable. Any solutions?

Hello Josephene,
Welcome to the Apple Support Communities!
I understand that after recently updating to the most recent versions of Mac OS X and iTunes. To troubleshoot iTunes Wi-Fi syncing not working as expected, please work through the suggested steps located in the attached article.
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing - Apple Support
Have a great day,
Joe

Update 10.2.2 older ipod/iphone sync cables no longer work.

Update 10.2.2. I updated to 10.2.2 and my older ipod/iphone sync cables no longer work. Im talking about the cables with the longer connector and the connector locks not the new style that is a short plug with no lock. Anyone else having this issue?
Tried normal steps, reinstall restart etc. No change. I'm at work and the cable works fine on 10.2.1.1 something in the update must have changed.

On your computer go to the control panel (hover in the lower right corner) then programs, add/remove programs
Uninstall iTunes, Apple Mobile Device Service, Apple Application Support then go to apple.com and redownload and reinstall iTunes and try again.
You won't lose any content, you're not deleting that, just the programs that access them.
What is thought to happen is that sometimes a new version of itunes doesn't update the drivers in those other two programs. The only way to update the drivers is to force it by uninstalling the programs which allows itunes to write the correct ones.
My iPad and iPod did exactly the same thing and this is how I fixed it.

Since upgrading to Maverics, can no longer sync Contacts via cable!

Since upgrading to Maverics, can no longer sync Contacts via cable!
As I am not willing to put my Contacts data on iCloud, I am no longer able to update Contacts between MacBook, iPhone and iPad. This greatly reduces the value of these products.
Any help here???
Thanks.

Wait for the next iTunes release.
http://appleinsider.com/articles/14/03/20/apple-restores-usb-itunes-contacts-cal endars-syncing-in-new-os-x-mavericks-1093-itunes-1116-betas

EOS 70D - nowhere to attach sync cable

Hi everyone, just hoping to get some direction re triggering studio lighting with my Canon 70D that's just arrived.
A long time photographer I am however just venturing into the world of studio lighting and have this month just set up a small home studio. With no formal training I'm learning as I go (thank goodness for youtube!) and tomorrow will be my third studio shoot so definitely lots to learn.
For my first couple of shoots I used my Canon 40D with a sync cable but my 40D died last week and I have just received the 70D which I have just found out does not have a plug for a sync cable.
I believe that I should be able to use my speed light to trigger my strobes but am a complete novice when it comes to such things and must say that I don't find the settings on the speedlights to be very intuitive.
I've read that another option is a hotshoe adapter that will allow me to plug my cable in to it. Perhaps there are even more options? If I can avoid having a speedlight attached I guess that would make my life easier, easier to move around, less weight etc.
My ultimate goal is to have only the strobes fire and not the speed light itself.
My lighting equipment is as follows:
1 Digiliter YJB-G300 (which can be used as a slave)
1 Bowens Prolite 41A (which I've only used as the master connected to my camera with a sync cable)
1 430EX Canon Speed light
1 550EX Canon Speed light
All suggestions gratefully accepted.

The good news is that you have lots of options, but that's probably the bad news too
The easiest answer is that yes, you can get an adapter that slides into the hotshoe and has a PC port if you want to go old school and use cables. It's simple enough and cheap enough, but there are much better options.
One option is to use a flash as a master flash to signal the others. The 550 can be used as a master, but your 70D's built in flash should be able to do the same. But you'll only be able to use the Canon speedlights using this function (unless your monos have an optical sensor, but you can buy these). You can also set it so that the flash fires to trigger the other flashes, but doesn't affect the exposure.
The option above is dependent on line of sight, which can become a nuissance if using modifiers. Using radio frequency triggers gets past this limitation, and is the standard method these days. If you're ok using manual only (the monos are only manual anyways) you can get really cheap triggers. Pocket Wizards are the gold standard, but expensive. Yongnuo is the 'gold standard' of generic options. I highly recommend the RF-603 II. They're about $30 for a pair, you'll need 5 total (one goes in the hot shoe as a trigger, the other 4 will trigger your 4 flashes).
There's a lot of good information out there, as you've found on YouTube. I highly, highly recommend going through the Strobist blog. It's geared towards using speedlights, but there's some discussion of studio lights, and much of the information is universal anyway:
http://strobist.blogspot.com/2006/03/lighting-101.html

Palm Tungsten E No Longer Sync with Macs

I have a Palm Tungsten E (OS 4.5.1P) that no longer Sync's to my two Macintosh computers with OS 10.5.8 but still works fine with my PC computer. That's to say the Macintosh computers won't even acknowledge that I'm trying to sync and via versa that the Tungsten doesn't see the Mac's trying to sync. It's like I have no USB cable attached (which is how I have always synchronized it).
In trouble shooting, I've found that my Palm Zire 72 (OS 4.5.2P) will sync flawlessly with all these computers. What did I change?! Nothing I think. Help please.
Post relates to: Tungsten E
Message Edited by Green-Achers on 09-17-2009 09:49 AM
This question was solved.
View Solution.

Have you done a restart on the Mac's? Also on the device? Also have you tried a different sync cable?

IPod will no longer sync with iTunes

I started a thread before about how I could no longer sync the e-books I added to my iTunes account to my iPod touch. I'd found a workaround by e-mailing the books to myself and then opening them in iBooks on my iPod.
Now however I'm having the same issue with ALL THE CONTENT in my iTunes account. It still recognizes my device. I HAVE updated iTunes and my iOS (my iPod touch is 4th generation so I don't have/can't get iOS 7). I have uninstalled and reinstalled iTunes altogether. I have made sure the right boxes are clicked before syncing. It will go through the sync but the part where it says it is adding the files and shows them adding individually never happens. It just jumps to step 4 finishing and then when I check it never appears on my iPod. This is frustrating. What point is having an iPod if I can't USE it? It's basically a $200 paper weight. And YES I'm using the same apple ID, the same computer, etc. I've always used and I never had any problems before until a few months ago. It just stopped working. I've done most of the things suggested in all the other support threads I've read about similar issues and nothing has worked. Obviously lots of people are having this issue but from what I can tell the suggestions people are offering don't seem to help them.
So I guess I'm just putting this out there in the hopes that someone has a new idea to offer that will actually work? If not, does anybody wanna buy a 4th generation iPod touch?

I did restore from back-up as well. And I had thought of restoring my iPod to factory settings however...I just got my mother-in-law's old iPhone 3GS. Upon getting it from her I restored it to factory settings. After having the problems tonight syncing my iPod to iTunes I tried syncing the iPhone. It started out fine, showing it as a new device and setting it up. It shows both devices on my iTunes and then when I went to sync it I got the error message that none of the songs could be copied from my iTunes because they could not be found. But they all clearly show up in my iTunes. I had done this before when I was having the issue with my books and then I had deleted them all from iTunes and readded a few that I wanted to put on my iPod and it still wouldn't sync them. So I really don't want to take absolutely everything off my iPod and restore it to factory only to be unable to add anything from my iTunes ever again as is the case with the iPhone.

IPod will no longer sync podcasts from iTunes store

Both our iPod and iPod Nano will no longer sync podcasts. We have downloaded new music, which will sync, but not the new podcasts from the iTunes store. iTunes indicates that it is syncing (which takes about 1 second) but the podcasts are not synced.
We have deleted all the existing podcasts and downloaded a single new one, with no change in the problem. We have tried both iPods and the result is the same.
We are running ESET NOD32 version 3.0 for Anti-Virus. We have checked with ESET and performed the exceptions that are known to cause problems with iTunes, and there has been no change, except that iTunes no longer freezes, which it previously did.
Hopefully someone out there can help us.

easiest way i have found to resolve the issue is go into itunes while phone is plugged in. you will have a list of tabs across, summery, info, ringtones, music. select music and where it displays sync music unselect that and hit apply in the bottom right (dont worry your music should be saved on the computer) once the sync is complete re check the music sync option. ive noticed this to work 95% of the time......hope this helps
I Hope I Was Able To Help You Or Solve Your Question.
Simmm

My ipod nano will no longer sync with itunes since i have purchased an iphone 4s and synced it with itunes.

My ipod nano will no longer sync with itunes since i purchased an iphone 4s and synced the phone with itunes. When I plug my ipod into my imac, it does not even read or recognize my ipod. What do i do?

Are you using the original cable that came with Nano and not your iPhone's cable? Have you worked through the troubleshooting in this Apple support document?
http://support.apple.com/kb/TS1410
B-rock

IPod no longer syncs with computer

My iPod will no longer sync with my laptop. I keep getting the following message:
"The iPod "JRT's iPod" cannot be syned. You do not have enough access privledges for this operation."
Apple told me tht it was a problem with my Norton 360 software. I have since removed the software and the problem still persists.

Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
New cable and different USB port?
Runs this and see if the results help with determine the cause

After my ipad WIFI upgraded to 5.0.1, I can no longer sync with my PC?

Recently, the new wireless upgrade worked wonderfully. My ipad is correctly upgraded as of 11/13/11. For the life of me, I can't figure out why my ipad will no longer sync with Itunes. I realize that iCloud enables me to push various backups wirelessly, but I still want to sync with my iTunes in order to add playlists and content that will not reside on the cloud.
When I say that it will no longer sync with itunes, I mean that I cannot get either an iPad or iPod Touch to show as being connected or synced with any number of apple USB cables conntected to my PC and iTunes. Hard resets, computer reboots...since my upgrade, I can no longer connect these devices. Can anyone tell me why I can't sync?
Thank you in advance

Minor update: I have multiple PC's in my office. This same iPad and other apple devices properly work and sync with their connection to this other computer. Both computers are running the 64bit iTunes and both have Windows 7 64bit OS running on both machines. I tried deactivating firewalls and even deleted the iTunes with a fresh installation with no avail.
Something is keeping my Apple mobile devices (iPods, iPads) from being recognized within iTunes. However, they all are properly recognized by my PC.

My Audible Enhaunced files no longer sync to my IPad2 since IOS 5

Anyone else have this issue: My Audible Enhaunced files no longer sync to my IPad2 since IOS 5
At first i could not get any new Audiobooks to sync but when I separated one of the MP3 Audiobook version files from the enhaunced Audible ones it synced the MP3 audio book fine
I am running Itunes 10.5 on Mac OS Lion 10.7.2 and my Ipad2 has IOS 5
I am syncing via itunes on my iMac via a cable as usual
I can play my Audible files in Itunes, so my Audible Account is authorized.
I did not notice this at first as i was listening to a series and the current book i just finished was MP3 but the next was Audible ( the reason for this because of region issues aome books are not available in Australia as Audible but Amazon sells the MP3 version sometimes. so whilst most of my Audiobooks are Audible some are MP3 or CD depending on what I could get.
when i tried to sync it took a long time but no installing tracks was being listed.
to cut a long story short i wiped the Ipad2 and started to reinstall first the Apps then the music and movies and latly the Audiobooks . . .
When i reach the Audio books the problems started again so i tried an MP3 audio book on its own tried to add a Audible file and the sync went into limbo again.
Apples IOS has obviously broken the ability to sync Audible books I had no issues before this and i know the files are ok i listen to a few to check.
It obviously has something to do with Audibles enhaunced format / Audible authorization which worked fine until IOS 5

Update to the Audible sync issue:
I have been in contact with Audible and reported to Apple on this issue
So far many email replies from Audible . . . zero from Apple . . .
Below is Audibles reply
Dear Kelvin,
Thank you for all your information regarding the iPad since the Mac iOS update.
There are many iPad specific issues that have been caused by the iOS5 update. At this time, we are awaiting for Apple to resolve these issues. Apple has told us this issue will be resolved by the next update, although, this release date is still unknown. In the meantime, you will need to transfer your titles via the Audible application. I do apologize for this inconvenience.
I thank you for your patience during this time of inconvenience!
Sincerely,
Monica V.
Audible Customer Support
So in short if you have installed IOS5 and wish to transfer your Audible files to a device ( i assume this issue is not iPad 2 specific) you will have to wait on Apple to fix this issue which according to some developer post they were aware of during beta. Eg you cant sync Audible books to you device via iTunes.
You will have to re-download/download any books you want to listen direct too the Audible App. on your device until Apple gets around to fixing this issue.
If you have to updated and want to sync to your computer i suggest you DON'T INSTALL IOS5 UNTIL APPLE UPDATES IT
Hope this helps
I know it's not a fix only Apple can do that . . . and it's an Audible issue which is not there product . . . . they just have a relationship with Audible. . .
Apple probably hopes people will buy their overpriced Audio books . . .
I have never under stood why anyone would when you can save at least 1/2 the cost and have a bigger selection available to you on Audible
Nuff Said
PS i know i spelt enhanced wrong on my first post but i don't think Apple allows editing of posts
-- Kelvin
MacBytes
http://www.reddit.com/user/MacBytes/
https://twitter.com/#!/CaptainSkurvy
https://plus.google.com/u/0/107817606533013579228

New iCal no longer syncs in the background?

Ever since I upgraded my iCal within MobileMe and iCal on Mac to that new CalDav thingy, iCal doesn't seem to sync in the background any more, like the old one did with the MobileMe sync throughout the day.
I have mine set to sync every hour but it doesn't seem to sync unless iCal is actually running on the Mac - if I launch it and it hasn't synced in an hour, it starts syncing, so it's not like I'm missing syncs, as long as I make sure to fire it up every now and then.
I used to have it set to "Push" sync, but that was annoying. Whenever I tried to create a new event, after writing a few words for the event, iCal would lose focus from it (due to the sync starting) and I'd have to double-click my event to bring up the box where I can edit event title again (to finish writing it). Frustrating.

The Calendar is no longer 'syncing' as such and nothing you do in System Preferences>MobileMe>Sync will have any effect. You should turn Calendar syncing off there (the other data continues to be synced as before).
The Calendar now lives on the MobileMe Server and iCal reads it from there when opened (like webmail) - it does maintain a cached copy (unless you turn that off) so that you still have a calendar when offline. Changes won't appear until iCal is running. If it's left running and you make changes elsewhere they should appear pretty quickly.
I don't know why you're having the focus problem. I double-click in a day (when in month view) to open the pane for a new event, type the event title and make any necessary settings: I then click 'done' and immediately see the syncing icon appear. I do have the calendars set to Push. You can set the sync to various delays if you want, but as you've found iCal does have to be running.
You don't say whether you are also using iOS4 devices: someone posted that his iPad only picked up changes when the Calendar was first opened, and not subsequent one while the calendar was still running - he had to close it and open it again. I don't know whether this is expected behaviour or whether he has got some setting incorrect (I don't have an iPad or iPhone to check).

My iTunes library will no longer sync to my iPhone or iPad, nor will it play from my Mac. My Library is on my external HD. iTunes is correctly looking to the HD as its library. Please help...

My iTunes library will no longer sync to my iPhone or iPad, nor will it play from my Mac. My Library is on my external HD. iTunes is correctly looking to the HD as its library. Please help...

Guys, I found another user and what he said to do worked!!! I have copied the information below:
This was 1 of the things that happend to me too, the other one was that at the bottom of the itunes page were it says all the memory info, it marked that I had over 3gb of other memory wich I didn't.
Anyways what I did was to unmark the calendar, contacts etc. ( so that they wont sync with the computer ), pressed apply, then I marked all of them again, apply again and for last I pressed Sync wich is at the bottom right coner by the apply botton.
I'm not sure that had anything to do with it but it worked, my music appeard both of my itunes playlists and the ones I bought in itunes. Also the other memory dissapeard and it's all good.
I'm not sure this will help you but thats my 5 cents, if the problem continues its better to call customer service and ask for a technician.
Hope your problem gets solved. Have a nice day.

Found longer sync cable!

Similar Messages

Maybe you are looking for