Found MIME bug causes

Dear all,
I having been using Thunderbird before and recently Apple Mail 3 get my attention. However I find alot of my China staff's email's attachment become MIME attachment. No matter how they attach it. I try different extension like: Rar, zip, doc, jpg, png, mov and more... all of them become a MIME attachment.
However all staffs from US have no problem... then I find the problem.
With the same attachment, if the attachment is name in ENGLISH... nothing happens, if the attachment is Chinese named... then it becomes a MIME attachment.
Is this a known issue and is fixed or going to be fix? Or actually there is some configuring issue i miss out.
Regards,
Jeff
Message was edited by: Jeff Lyndon

I also get a lot of attachment as "mime" attachments. I am using a fully updated Leopard.
Upon inspecting the file name of the most recent mime attachment in gmail (online), I found it does include a portuguese caracter (ã), so maybe your onto something! I'll send apple a report of the issue.
I don't have CS or Acrobat, so i believe this is a problem with Mail itself.
Best regards.
Daniel

Similar Messages

I think I've found a bug... (CS 4 6.0.4, export to EPUB, w/ test case)

Hi everyone,
I think I've found a bug. I suppose I would like to see if others can reproduce it - I've managed to on 2 work machines, but the more the merrier. I suppose I'm also hoping that giving this bug more exposure will increase the likelihood of it getting resolved. I can dream
The bug shows itself when exporting an InDesign document (or book) to "Digital Editions", or as an EPUB file. The InDesign source needs to have a Table of Contents, and this TOC has to be used by the EPUB to create TOC entries (see the "contents" tab of the export window). In certain cases, using the InDesign TOC causes the EPUB export to garble certain characters; unicode-specific characters, in my experience.
Steps to reproduce:
Create a new document, add a blank text frame and fill it with placeholder text. add a heading to this text frame, styled appropriately.
Create a table of contents, using the heading style you defined and used previously.
Add some unicode characters to the end of your text frame. I've been using "bêche-de-mer — a genus", which has 2 unicode characters. My tests have shown about 1715 characters in the text frame is enough to trigger this bug.
Save the document and export to digital editions. under the "contents" tab, check the "include indesign TOC entries" option.
Open the EPUB (or unzip it and view the xhtml content). I would expect to see "bêche-de-mer — a genus" at the end. However, I see something more like "b√™che-de-mer ‚Äî a genus" instead. I do see the correct output if I don't check the "include indesign TOC entries" option when exporting to EPUB.
I've confirmed the fonts I've tried are unicode-compliant and have the relevant character codes. I'm running the latest update to InDesign CS4 (6.0.4) on OSX 10.4.11. This character encoding problem doesn't manifest itself in the PDF or IDML export, only the EPUB export. Choosing whether or not to include embedded fonts in the EPUB doesn't make a difference to the outcome. I have run this test on my machine and a workmates, which is OSX 10.5.[something]
I'll attach a test document to see if others can reproduce this bug. I'd be interested to hear if others can, or cannot reproduce it. I have submitted a bug report at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform, but that doesn't exactly imbue me with confidence that anything will get done in a hurry...
This problem is pretty annoying; I can either have EPUB navigation, or uncorrupt text. My current (proposed) workaround is for the operator to create 2 EPUBs, one with a TOC and one without, and merge the two together... EPUB transplant if you will. A bit ugly....
thanks for listening!

Hiya Joe (and Archie)
It is indeed an annoying bug - I spent a few days looking around it before posting (wow, it must be nearly a year ago now).
Fortunately, it really is straightforward (if a bit of a hassle) to workaround:
- make 2 EPUBs, identical except one will have a TOC generated (epub-a), the other will not (epub-b)
- extract the TOC file from epub-a and insert it into epub-b
remembering that EPUB is a zip package, this is very easy indeed. On OSX you have /usr/bin/zip and /usr/bin/unzip to assist with extraction / insertion in a script (bash, applescript, etc). I don't think Windows comes with command-line zip programs, so you'd need to hunt around a bit.
Good luck. I don't know if this is resolved in the latest 6.0.5 patch - if you haven't updated to that, it might be worth a shot. And if you have and it's still a problem, please respond to this message just so there's a log stating as much.
Steve

FAQ: I found a bug. How do I write a useful bug report? Or send bug files to Adobe?

If you think you've found a bug in Photoshop CS6, please post your findings here on the forums.
Here is a list of the information we'll want for you to gather at a minimum:
Clear and concise steps so that someone who isn't in front of your comptuer can reproduce the issue you are seeing
Include information on the operating system/version you are running. (e.g. "Mac OS 10.7.3" or "Win XP Service Pack 3")
Here are some more detailed instructions for writing a useful, complete bug report for us on the forums:
Provide a descriptive title that includes your OS information:Example: "Photoshop crashes when I save a JPEG file using the File>Save For Web & Devices... command (Mac OS 10.7.3)"
Provide concise, step-by-step details on how to reproduce the issue you are seeing.
Example:
Open an 8-bit, RGB image by selecting File>Open...
Create a new layer by clicking the "Create New Layer" button on the bottom of the Layers panel
Paint on the layer created in Step #2 using the default Brush tool
Choose File>Save For Web & Devices...
Make sure the optimized format is set to "JPEG" and set the Quality setting to "80"
Click the Save button at the bottom of the Save For Web & Devices dialog, choose the desktop as the location for saving the file
Provide a description of the "Result" you are observing:
Example: "Result: Photoshop crashes"
If there is an error dialog, please include the exact wording displayed in the dialog or provide a screen shot or video of the entire screen so we can see the dialog as well as the state of the application - i.e. what panels are shown, the state of the Layers panel, etc.
If the error is a visual defect, either in the user interface or the image itself, provide a screen shot or video of the entire screen so we can see the dialog as well as the state of the application - i.e. what panels are shown, the state of the Layers panel, etc.
Provide a description of the "Expected Result":
Example: "Expected Result: Photoshop to save JPEG file to the desktop, no crash"
In some cases this may be obvious (such as in the case of a crash) but in others, what you expect to happen may be different than what the application was designed to do. Please be as specific as possible.
Provide the crash log by submitting all crash reports, including your email address, for every single crash your encounter:
You may also include the contents of your crash log in your forum posts as well, but always submit them using the above instructions as well.
Crash logs are located on Macintosh here: Users/<your user name>/Library/Logs/CrashReporter
Provide your System Info from Photoshop: What's even more useful is if you can share your System Info from Photoshop as it contains all kinds of useful information (OS/version, graphics card, driver version, 3rd party plug-ins used, etc) that will help the team track down your issue.
On occasion, the Photoshop engineers may request that you provide problematic files in order to reproduce and debug your issue.
In these cases, please post the file somewhere using your own servers or one your favorite online document/distribution services and provide a URL/instructions to download the file:
Dropbox
Adobe SendNow
YouSendIt
If the file isn't something you can post publically, you can request that someone from the engineering team contact you to figure out a secure way to get the affected files.
Thanks,
The Photoshop Development Team

First thing would be to realise the exact error. Second would be to check your logs to see what you have installed/upgraded which might be causing this error. Third, google your error and see if matches turn up. Fourth, search in Arch bugtracker to see if a match exist. Else file a report.

I found a bug in iOS 4.3.3 - Long voice memos

Hello,
i found a bug in iOS 4.3.3 for my iPhone 3GS
Long voice memos can not be played
In these cases, the iPhone saves the file not in the format M4A or can not open this file.
This file is stored in the folder /var/mobile/Media/Recordings
In This cases there can be find a file in the format MOV.
During recording, the voice memo has the format MOV.
When the voice memo stopped the file must be stored in the format M4A.
For large files, there are currently problems.
I use the program iPhone Explorer and save the MOV-file on my computer.
Now i can open it with QuickTime.
Best regards from Germany!
Ruediger

Apple Feedback

I've found two bugs in iOS 7. 1) declined calls does not appear as missed calls on the lock screen/notification centre. 2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device

I've found two bugs in iOS 7:
1) declined calls does not appear as missed calls on the lock screen/notification centre - iOS 7.0.2.
2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device automatically - iOS 7.0.

We are all users here, just like you, but you can tell Apple about it by using this link:
Apple - iPhone - Feedback

Dear Apple, unfortunately, I think I have found a bug in ios 7. During an incoming call is no call rejection or selection of the ability to send a text message. I hope it is a bug and there is a solution. Thank you very much.

Dear Apple, unfortunately, I think I have found a bug in ios 7. During an incoming call is no call rejection or selection of the ability to send a text message. I hope it is a bug and there is a solution. Thank you very much.

Please report via Apple Feedback. These are user forums. You aren't speaking to Apple here.

I Have found a bug in iOS 7.1 on iPhone 4S ? What should i do ?(i'm french)

I Have found a bug in iOS 7.1 on iPhone 4S, what shoud I Do ? (i'm french)

Use the contact us link at the bottom of the page and tell Apple.

Already found a BuG in the PR1.2

sins this morning the new PR1.2 is availeble.
Not much changes.
Already found a BuG
The Calender Noticing (Bday warning) for missed calender warning
When unloching the phone and accept the missed warning.
You get on the screen with the (Bday) notification.
After that you can't close the screen with the CLOSE button below right anymore.

Also, the yahoo email client always connects to the internet after the phone is powered on.
Model N8, Dark Gray

I found a bug in multitasking in ios 7, how can I submit this bug to apple to help engineers fix it

I found a bug, how can I pass it on to apple engineers to help them fix it

I recall hearing (in another post, maybe yesterday) of a multitasking bug that Apple engineers were asking a user to test...I'll see if I can find it.
EDIT: Starting at the bottom on page 2 (how to test) and continuing with more details for testing on page 3 https://discussions.apple.com/message/23666433#23666433

I found a bug in the gamma (when watching some videos) Ipad 4 wifi+4 G

I found a bug in the gamma (Ipad wifi 4 Wifi+4G). It is the same bug as the ipad 2 at release.If you try to play any video (youtube, apple trailer, your own converted video) on the iPad 4, any black images will turn grayish. Ask fixing!!! Support pls help meee...
P.S Sorry for my Eng (see nickname)

This is an iPad user to user forum. Apple doesn'y read or respond.
Send feedback to Apple.
http://www.apple.com/feedback/ipad.html
 Cheers, Tom
PS Your English is good!!!!!!!!!!!

Found a bug in the Convert widget how to report ?

Hello, i found a bug in the default convert widget delivered by apple, how can i let them know if this bug ? (it's not crashing, it's a big calculation error)
Thanks,

Fill out and submit this form.
(23177)

Found a bug?

Hey
I think I've found a bug but I'm not exactly sure.
Whenever I fun an application that temporarily changes the shortcuts on the mouse or keyboard, all my leopard shortcuts are erased and I have to redo them.
For example, multiple times after playing WoW I've noticed my click wheel or the F12 shortcuts don't work for dashboard anymore. They become unchecked in the system preferences.
Does anyone else have this problem, and if so, do we report it to apple?
If no one else has this problem, how do I fix this?
Thanks
Rob.

Once you've ruled out incompatible apps, send a bug report (or enhancement request) to Apple via its Bug Reporter system. Join the Apple Developer Connection (ADC)—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report/enhancement request. You'll get a get a Bug (ER) ID number; thus, starting a dialog directly with engineering.

Found a bug on ios 7.0.2 with lock and home screen

I have found a bug concerning the lock screen when you open the iphone and you push the screen to the rightt (sorry in french and dong know how to explain correctly)and at the moment you se the lck screen desapear you "take back" the lock screen page by pushing tp the left and then you will have the home page wallpaper on lock screen ( wont work if you have a passcode) and you can't have your default lock screen by putting the phone on sleep mode ... It just not coming back .. You hve to put the iphone on sleep mode without toucching the screen to have your default wallpaper back on lock screen.. (Works on any iphone )
I have another problem to with my batery since ios 7 update my battery goes 100-0% in like 5h .. And i just exchange my iphone because my power button was stuck and i dont have any garanty and its does that for all my friend with iphone 4s running ios 7.0.2
Wish apple could fix those 2 bugs or if anyone as any solution for me pleAse tell me
Thank you.

Apple Feedback

Image Processor bug causes PS to crash (CS5, 12.0.4, Win7x64) -

Hi,
I'm trying to process 64 RAW files using Image Processor, and I noticed that Photoshop (x64, I don't have the 32-bit version installed) never closes any of the files after it has processed them. This causes the RAM to fill, and eventually Photoshop to crash. I tried both via Bridge (Tools --> Photoshop --> Image Processor), and Photoshop itself. I have a new system with 8GB RAM, and when I start up Image Processor, Task Manager tells me PS eats away 6.5-7GB of it during the first minute. Shortly after PS crashes.
My updates are up-to-date according to the update manager. I haven't had this problem ever before, so the cause must be the 12.0.4 update (or the one before it). Is there a workaround or an update on the way? Maybe this is a known bug. I found out that people have experienced the same behaviour with CS4.
Kind regards,
Kimmo

Sorry for the delay in response; the Adobe server for logging in was down for hours.
The reason I'm on the latest drivers is that I made a clean install of Windows 7 a couple of days back.
Regarding the Intel driver I mentioned I downloaded: I had to go another route; the Intel driver "was not validated for this system", so I had to get the latest driver from the manufacturer of the computer -- which kind of sucks, to be honest. Well, anyways, the driver version from the manufacturer is the same I had from Windows Update (i.e. not the latest possible), but I went and installed it anyway -- thinking that maybe it's been "customized" somehow...
Unfortunately it brought no change. Action B still accumulates files while others do not.
I should clarify that the reason why the "Wood Frame" kept accumulating files in the PS main window was that it never finished the process. I tried it to run on pictures that were larger than what it was designed for and thus it stopped mid-process and left the window open.
(BTW: I'm talking about windows and tabs interchangeably here)
"Action B", as I've called it in this thread, does generate a final, processed JPEG, but apparently it doesn't return a confirmation of it finishing to the Image Processor. Without Image Processor knowing that the script finished successfully it leaves the file open.
I see that in File --> Automate --> Batch it is possible to have the process "Save and Close" each file it processes. Maybe it would be beneficial to have a similar function for Image Processor. And not only "just in case" -- the user might actually want to leave all the files open, who knows, but in situations like these a forced closing of a file -- be it finished or not -- would be nice.
I would also like to point out to other people reading this thread that, while this problem can be fixed by simply remaking the troublesome action, I feel finding the cause for it would benefit a lot of people too. Maybe the action was corrupted somehow, maybe PS 12.0.4. has a bug that makes my "Action B" from 11/2011 incompatible -- would be nice to know, huh?

Premiere Pro CS6 - Warp Stabilizer BUG causes project to crash

Hi!
Sometimes Warp Stabilizer causes Premiere CS6 to crash. I found out what steps cause this so hopefully a fix can be made in an update soon:
1) Add the WARP STABILIZER to a clip. It Analyzes and then is applied to the clip.
2) TOGGLE OFF the effect in the effect controls window
3) Adjust the clip duration and RE-ANALYZE while the effect is TOGGLED OFF still and Premiere crashes.
Happens every time. BUG Report was filled out.
(If the effect is toggled ON when you RE-ANALYZE it, everything works okay.)
So why not just not do this? Well, I usually don't but sometimes in the middle of working with hundred of clips I toggle on/off the effect to check certain things and then leave it off. If the clip is adjusted later or I come back and try to click ANALYZE again while the effect is toggled off, everything crashes.
That's the pop up. If Premiere doesn't allow for you to re-analyze a clip while the effect is toggled off, then the ANALYZE button should not be active or at least a popup saying "Cannot Analyze this clip while it is toggled off". Instead Premiere crashes and upon reopening the project you are forced to rename the project which fortunately is usually fully recovered.
Running 6.0.2 on a suped up 2011 27" iMac with 16gb ram and AMD 6970M 2gb video card.

I know I'm piggy-backing on an old post here, but I've just had real issues with a similar thing on Mac. Unfortunately, my Premiere CS6 is crashing and becoming totally unresponsive whenever I simply apply the Warp Stabilizer. The moment I drop it on my clip, BLAM! I get that same pop up you posted. I click 'OK,' and then nothing. Just beachbal of death until I force quit. What's more annoying is that, not only has the camera operator made the stabilizer essential, but I've been using it for the past week with no issues up till now.
At first I thought I was overloading Premiere by dropping the effect onto two clips at the same time. But I tried it one at a time and had the same problem. My recovery project files seem to be ok, but that's not even nearly the point. I simply can not use a great and essential tool. Help?

Found MIME bug causes

Similar Messages

Maybe you are looking for