Found new Raid controller all of a sudden

Alright, my winter break just started from college, so I brought my computer home with me.  I hooked it up and it wouldn't boot.  Somehow a setting in the bios got changed and I had to change it back.  Now when it starts up it says it has found new hardware, it says it has found a new raid controller.  I have the driver installed that came on the msi cd.  I don't know what windows is asking for.  So since I don't know what its asking for, I click cancle.  Then it gives the deal about how the "new" hardware might not work correctly.  The computer has only been turned on for a little while but it runs fine so far.  Any thoughts on what I should do?
System specs:
865PE-neo2
P4 2.8 800fsb
1GB corsair ram
2 120 Gig Samsung in raid 0

If your drives are on the Intel controller and working properly as Raid0, it's probably the Promise controller that Windows is seeing and asking for drivers. If you have nothing connected to Serial3&4, IDE3 you can safely disable it like Danny says.
Bios>>Integrated Peripherals>>Onbaord Promise Controller - Set to "disabled"

Similar Messages

  • I have a new MX922. All of a sudden I get Support Code C000 printer error has occurred

    I have a fairly new MX922.  All of a sudden I get Support Code C000 which says printer error has occurred.  There is nothing in the print cue.  I have restarted my computer.  I have turned the printer on and off. I have turned the printer off, unplugged the printer, plugged it back in again, and turned on.  The same message and flashing light for the error is still there.  I can't operated my printer. Can anyone help me?
    Thanks,
    Kathy

    Hi Soot!
    So that the Community can help you better, we will need to know the computer operating system you're using (Windows XP/Vista/7/8 or Mac 10.x). Any other error messages or details you'd like to give will also help the Community better understand your issue.
    Thanks and have a great day!

  • I have an Iphone4s and its fairly brand new still, and all of a sudden i was talking on the phone and the speaker stop working.. Is there a manufacture warranty on the iPhone?

    I have an Iphone 4s and its fairly brand new still, and all of a sudden i was talking on the phone and the speaker stop working.. Is there a manufacture warranty on the iPhone?

    Verdale wrote:
    ... Is there a manufacture warranty on the iPhone?
    There is a One Year Warranty...
    iPhone User Guide
    Have you tried any of  the Basic Troubleshooting Steps...
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • On my new iPad 4, all of a sudden the mail screen went to a vertical format and I can't change it back to horizontal.  Help!

    The mail screen on my iPad 4 all of a sudden went from the normal horizontal format to a vertical format, and I can't change it back.  Help!

    You should really start a new discussion because many times people will not even look at a solved post. It's one thing if you read the post and the solution works for you, but to add onto a solved post, especially when you have a different problem than the original person that posted, you might not get the help that you need.
    I will give it a try. Close the iBooks app and reboot the iPad.
    Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • New Facetime ver all of a sudden nt signing me in after fair usage of weeks together !

    I got the new paid Facetime n it worked great until the last 20 days or so it just wouldnt sign me into my id after i signed out once. i even made a new @mac.com id n tried but still nothing seems to get me logged in. I keep gettin a msg sayin check ur network connection and try again!
    it so happened tht 1st i strtd gettin to c who is callin me on FT bt jus cldnt ANSwer the call ! n whn i tried callin bak, the person at the other end wldnt even get to c tht im calling.
    so i thgt il log off n re-login....thts whn i srtd to hav this sign in prob !
    tried the chg of DNS no. n makin new id n all possi. still nthg seems to work wit me !
    i hav been stickin to skype as a temporary resort....bt i luv my FT n wld luv my Mac book pro to wrk wit FT ! :-)
    PLease gimme a suggestion to mak it wrk !
    thanx.

    Hello,
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • IPhone in "setup new phone" mode all of a sudden

    Yesterday I plugged my iPhone to the charger.
    Today when I took my iPhone 4, I noticed there was a gray linen background on the lock screen, there was a little round icon with an "i" above the unlock bar. I was expecting the picture of my family.
    I unlocked it and was presented with a "choose a language" dialog. Hmm. So I scrolled down to Swedish, then back to English because that's the language I use on all my devices, and selected that.
    I THINK I saw some cyrillic characters at the top left where the operator typically is displayed, then it changed into "No Service". That made me very wary.
    Then I had to go trough the whole phone setup. Activate the phone. The phone knew none of my WiFi passwords. Luckily the last iCloud backup was from when I plugged in the phone last night, but it's still a hassle to set up everything.
    I had to put in a new lock code and it kept interrupting me setting that up with other notifications. Our office exchange accoung required a lock code. Apple should have a look at this, notifications interrupting each other during setup...
    But what happened? That what really buggers me! What possibly could have factory resetted the phone in the middle of the night? A bug? Have I been compromised somehow? Was it remote wiped without my knowledge? It wasn't turned off, i just pressed the home button and my iPhone had become a out-of-the-box thing with all my stuff gone! I tried to search the forums, I checked the usual Mac sites and tried to google around but I could not find anyone whith the same problem. Have I been compromised? Did my phone somehow receive a remote wipe?
    The Diagnostic & Usage setting is completely empty. I had hoped that there maybe might have been logs.
    Now I have to check settings because I use several itunes accounts (since I want to share photostream with my family but not imessages) and the setup process did of course not account for that. I suppose all my WiFi network passwords are gone. Or then all this stuff got restored by the iCloud backup. I can only hope. It seems my phone will be downloading apps and podcasts a few hours.
    Listening status of my Podcasts is toast for sure, since that bit isn't cloud enabled yet and I haven't synced with iTunes for a few days.
    This was a very unpleasent surprise
    Root cause found. I'll still post this in case someone else finds himself in this perculiar situation then his google search is maybe more successful. Turns out my youngest boy apparently could not leave my phone alone. Our phones are set up to erase all data on the phone after 6 failed passcode attempts.
    Since I was too cheap to purchase additional storage on iCloud I had to excluded backup of the camera roll (the pictures are on Photostream anyway) which means all videos made the past few months including of one birthday are all gone

    It's rare, but it does happen. You could try a restore & see if that fixes the problem.
    Disable auto sync when an ipod/iphone is connected under preferences in itunes.
    Connect your phone, right click it in the device pane and choose backup.
    When completed, right click the phone again and choose restore from the backup you just made. Disconnect your phone and see if the problem goes away. If not, it might be a hardware problem since you've stated you did a reset.
    Reset: Press the sleep/wake button and home button at same time, keep pressing until the apple logo appears and then release.

  • Safari 8 - tab opens as a new window all of the sudden

    So I'm using Safari 8.0.2 on Yosemite. I came across a bug (or is it a new feature?):
    When I have a page opened as a new tab, sometimes, all of the sudden, this tab detaches from the main Safari window to become a new window. This happens as I move my mouse and read but I don't click on anything. I don't touch the keyboard either. it seems it just happens by itself randomly.
    Anyone has experienced the same issue? I find this pretty annoying.
    When it happens I would like to move this new window back as a tab of my main Safari window. I generally don't want to have multiple windows opened with Safari. I prefer to open links in multiple tabs.
    I hope someone has a solution to this issue.
    Thank you!

    What you describe happens when you drag a tab out of the tab bar. Are you sure that's not what you're doing? Is the trackpad otherwise behaving normally? Are any other pointing devices connected, such as a tablet, either via USB or Bluetooth?

  • RAID CONTROLLER help

    I need major aisstance, in my windows days, if I had a raid controller, all I had to do was hit 56 and load the drivers for the raird array and move forward. Now I havr 4 1.5tb sata drives that I want to put into raid 0+1, I want to them boot the dvd media and use the sytem restore from my time machine drive to my new array., Problem is, the install software WONt see the raid device. I have tried a highpoint 1810, a 2130, a 2300 (I think, and they all work fine once I have a installed os on another sata disk and then format the raid, aind install the driver. I need the drievers to se raid froim the initial boot. Any wegesttions, getting real sick o this,

    man, half asleep when writing that, great English dude..
    Figured it out, card just not supported in leo

  • Moving from VIA RAID controller to another RAID controller?!?

    Hello
    I'm going to install a RAID-1 with 2 SATA harddisks from seagate using the onboard VT8237 RAID controller of my KT6 Delta.
    I guess there should be no problems and that the temperature on the motherboard will be fine.
    However, what will happen if I want to move later on to a new motherboard with another raid controller or install a dedicated RAID controller?!?
    Will I loose all my data?  Or will the new raid controller duplicate the data based on the source drive?
    Thanks
    JohnQM

    I have read somewhere that the following migration paths apply for raid:
    1. raid-1 can always be migrated to a new RAID controller, no matter which brand, because raid-1 is just a mirror and no important information is written in the partition table
    2. raid-0 or other raid-levels
    2.0 from one brand of RAID controller to the same version of the RAID controller of the same brand: no problem
    2.1 from one brand of RAID controller to a new version of the RAID controller of the same brand: usually no problem (upwards compatible)
    2.1 from one brand of RAID controller to a RAID controller of another brand: no go
    Can someone confirm this please?
    Thanks
    JohnQM

  • Why do I all of a sudden have no send button on any email I compose?

    When I write a new email, I all of a sudden have no send button on said email; the only way I can send is by clicking on file and then send now. Yes, I have an addressee. This is the case for all emails from all providers including google and our business email @mcselections.com.
    Why is this happening and how can I fix it?

    I do not know what you mean by the main menu bar of the compose window. I have a mac, so maybe the layout is different. i usually am in my inbox-there is no compose window, only a new email when i click on write. When i click on "view" on the thunderbird toolbar, and then click "toolbars", the only options i have are "mail toolbar", "status bar", "quick filter bar", all of which are checked.

  • Xserve 2006 RAID Controller

    Hi Everyone,
    I have an Intel Xserve 2006. Recently the RAID controller card failed so I popped back in the regular SATA controller (that it originally came with) and ordered a new RAID controller.
    I am pretty sure I have the correct one for the 2006 model but it does not seem to work. I have no battery on it (thought one would come with it) the original expanded and I am pretty sure broke the other RAID controller.
    Any ideas why this new one is not working also? Is it the battery?
    Many thanks for any suggestions.
    David Lee

    Hi David,
    Have you got the new RAID card in there now or the SATA backplane? I'm in London as well so will try and help you out as much as I can if you need it.
    Contact details on my profile.
    Thanks
    Beatle

  • HT5767 My mail all of a sudden would not allow me to delete messages in my inbox saying, "couldn't be copied to "Messages" because an item with the same name already exists." Found it duplicates the message I wanted deleted in trash.

    Still  using the @mac.com   mail  address and up   to date on everything, but have not gone to Maverick.  All of a sudden Mail wouldn't let me delete.  Said that title of email was already in trash.  And sure enough it was.  Clicking on the help button on the message gets Nothing.
    The selected topic is currently unavailable.
    The topic you were trying to view could not be found.
    "couldn’t be copied to “Messages” because an item with the same name already exists."
    Any ideas.  My mail is not tied to gmail etc.. just all by it's lonesome.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Just purchased a new mac mini 3GHz Intel Core i7, with 16GB ram version 10.10.1. With it i purchased a new wireless keyboard. All of a sudden I was not able to use the #1 key. I thought I had a defected newly purchased keyboard. I pulled out my older

    Just purchased a new mac mini 3GHz Intel Core i7, with 16GB ram version 10.10.1. With it i purchased a new wireless keyboard. All of a sudden I was not able to use the #1 key. I thought I had a defected newly purchased keyboard. I pulled out my older wireless keyboard, and the same thing happened. It must not be the keyboard if it happened to two different keyboards. I have a habit of restarting my computer, when things don't work, I find it helps, and sure enough, everything works. Today, it happened again. Does anyone know what is causing this to happen?

    Try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    Try reinstalling Yosemite with out losing stuff. See:
    OS X Yosemite: Reinstall OS X

  • All of a sudden...the tabs won't open a new tab...when firefox is open I can SEE the new tab block with a plus in it but when I click, it doesn't open

    I learned to LOVE firefox because of the multiple tab feature. I have the color tab add on and LOVE it!! But all of a sudden, the tabs won't open!!! FI: I have one tab open to HuffPo and then I click the square next to it with the + in the middle. This used to open a new tab but now when I click it doesn't open....I have tried upgrading to the beta...no use....uninstalled the beta and reinstalled 3.6...nothing....It is making me CRAZY!!!!
    Please help.
    Stephanie

    That can a problem with the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
    See:
    * [[Troubleshooting extensions and themes]]

  • All of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any

    all of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any file or library that has anything to do with itunes except safari and quicktime are fine. im about to pull out whats left of my hair.

    Okay, that's got one thing ruled out at least.
    Can you check something for me, big? I'd like to see if iTunes launches with the Bonjour Service disabled.
    In your Start menu, right-click Computer and select "Manage".
    Expand "Services & Applications".
    Open "Services". (Perhaps maximise the screen to better see what's going on.)
    Right-click the Bonjour Service and select "Properties".
    In the General tab, set the Startup type to "Disabled":
    ... and click OK.
    Restart the PC and try launching iTunes. Does it open this time?

Maybe you are looking for

  • HT3825 How to view RAW from Canon 5D mark III for OS 10.6

    To 'Preview' RAW files from Canon 5D mark III, it is known that you need to install the Digital Camera RAW Compatibility Update 3.12 , but it can only be used with iphoto 9, which in turn only work in OS 10.7, so there is no way for 10.6 users to 'Pr

  • Need a help regarding planning layout

    Hi, I am designing a planning layout in OPO1. I have defined a column for Cost Eelemnt and next four columns with Period and Fiscal years, for these each column in the header line, i typed "&$1". Also created a Total Forecasted column for the sum of

  • Problems putting videos on visio

    I might sound kind of inexperienced sorry (probably because i am).ButI cant find out how to put videos on my Zen Vision M at all. I dled an MPEG 4 video and tried to put it on the Zen using the creative software. It said file type not supported, so i

  • MicroPC/LabVIEW RT compatibility

    Hi everyone, Currently I'm working on a hardware architecture but I meet some troubles. I would like to associate a GiGE camera with a microPC (pico-ITX or mini-ITX formats). Here is my idea : deploying LabVIEW-RT with NI Vision module developpement

  • Apple TV in Mexico?

    We''ve rented a few movies on iTunes US on our Apple TV that we plan to bring with us to Mexico - will we run into any issues?