Found Posted Elsewhere-​Is This Also For S10? Does It Actually Increase Battery Performanc​e?
Thought I read this here, but found this on another forum. Is this for the S10 or is there a specific download?
Does this actually increase battery performance for the S10? Advice/Info appreciated, thanks.
"Hey guys,
like to increase your battery life under Windows XP up to 30%?
Look what I have found
http://www.eweekeurope.co.uk/news/lenov ... etbook-873
Quote: "Battery life is said to be up to 6 hours, with "battery-saving software" helping the S10-2 achieve a 30 percent longer battery life than its predecessor."
And now do the following.
Download and install the following packages:
- Intel Onboard Graphics Driver
- Intel Chipset driver
- Lenovo Energy Management Driver
from the S10-2 driver website:
http://consumersupport.lenovo.com/en/Dr ... ryID=35057
I installed all 3 packages, just to make sure that the most important drivers are up to date!"
That is the psot-thxs.
Hi, with 3 cell and at 3-5 recharge - times reaches full capacity... should last for 2 hours 15 mins ... constantly mid (5 lines ) brightness & wireless on...
Did you read answer in last post ?
http://forums.lenovo.com/t5/IdeaPad-S-series-Netbooks/3-Cell-S10-Battery-last-Just-Over-An-Hour/td-p...
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1
Similar Messages
-
Use this mailbox for Junk does not appear to work in Mail 4.2.
Hello, all:
Have been using 10.6.x since it came out on my previous iMac [24" Early 2008 model]. Went with a fresh install of 10.6.3 on the new iMac [27" i7], and ported data over.
The only problem that I've had is that setting the Use this mailbox for Junk command in setting up Mail 4.2 does not seem to work. I've closed Mail and looked at ~/Library/Preferences/com.apple.mail.plist, and the correct mailbox name is indicated for the two accounts [IMAP and GMail over IMAP] where I'd like to do Junk Mail filtering. However, there is no centralized Junk Mail filter, which is really annoying me.
I didn't have this problem previously in Mail 4.x, and I'm expecting that it's a bug specific to 4.2, which I haven't seen in my previous incarnation because I did the import from 3.x->4.0, and the prefs carried forward correctly from 4.0->4.2.
Anyone else running into this, and is there anything else I should be looking at? Am I explaining the problem such that it's clear what I'm asking?
Thanks,
GeofI figured out the problem (for me, anyways). In Preferences > Junk Mail, make sure Junk filtering is enabled and make sure the "move it to junk mailbox" radio button is selected.
-
After upgrading to iOS7, all 'albums' in 'music' are shuffled and I cannot undo. Anyone else have this also?
After doing some more searching, I've discovered the problem, and it is all mine, I'm embarrassed to say.
When I adjusted the apps to a larger size, iOS7 only allows 9 apps per page per folder. If I have more apps, iOS7 just adds more pages within the folder. So the apps I missed were there all along, just on another page.
I apologize for any confusion, and thank you for taking an interest in helping me solve it. -
While using Skype on my iphone 4s i found the phone was heated up. It was very warm. I had used for 1 hour or so. Is this normal for other users aswell ?
And also sometimes when i get the call no matter how much i try to slide the cursor, it doesn't move. I miss those calls. It looks like it is freezed. Has this
happened to others too?*Update*
I thought I had found the offending 'app' namely "Songpop."
I regularly use "Songpop" on my phone late at night via my wifi connection.
All enteries on my phonebill are at midnight (even though I have a data allowance it was excluded from allowance). I switched 3G off on Friday, played "Songpop" at midnight and at the exact time I got a "Server Error" message.
I posted a message on the "Songpop" support forum.At first they said this was a problem relating to my ISP.
I have spoken to my ISP and asked if there are connection drops at the time I have been billed (ie to establish if my wifi dropped and 3G kicked in without my knowledge) and have been advised that there aren't any connection drops at that time.
"Songpop" have now responded that "This is an issue to take up with Apple Support" see: http://support.songpop.fm/songpop/topics/playing_songpop_on_phone_via_wifi_but_i ncurring_download_data_charges_for_3g_useage?utm_content=topic_link&utm_medium=e mail&utm_source=reply_notification
Hopefully someone at Apple can respond .... -
Why can I no longer, after having downloaded Lion, write accents and other diacriticals when in the Google, Yahoo, FaceBook, or even here in this post? The new method for getting at the "option" symbols works fine in other places like spotlight, but now even the older "option+letter" doesn't work in most places.
Chrome doesn't support the new accent/diacritics/macron chooser. I'm not sure about other browsers such as Firefox. You can use the old Option+letter combination that Doug suggested. Hopefully updates will solve these little incompatibilities shortly.
Neill -
I paid for and downloaded a song, but it won't play saying the file could not be found. It says this even when I click on the song IN the itunes store, so I can't even listen to the sample now??
I haven't kept records of the songs I have paid for, and a number of songs have recently been displaying this message, making me search my computer for them. Most I have been able to find, but this one immediately "disappeared" the moment I attempted to play it after downloading...... how do I either get it back or get my money back???How did you do this move? Unless you know what you are doing you have to move the whole, complete iTunes folder.
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381 -
Hi There: I am having a problem where pdf files on the web (i.e., links in a Word doc) open after an extended time and only as gobbldygook ( a file containing a series of characters and letters that make no sense). This also happens for another Mac user coworker in my office, while the PCs don't have this problem... Any help/suggestions for a fix would be most appreciated!
Just adding more info - MacBookPro running 10.5.8 and using Safari as the browser. The problem comes and goes - sometimes the linked Word files will open OK, n others its just a strring of crazy characters...
-
Thank you.
Save or print this page for your records. We'll also send you an email confirmation.
Case ID: 421912520
You have chosen to call Apple later. When you're ready, call the phone number below during business hours and refer to your Case ID for faster support.
1-800-MY-IPHONE
6:00 a.m. to 11:00 p.m. Central
iPhone
Restore or update not working as expected
You can review this case in the Cases & Repairs section.
Additional Resources
Return to Apple Support home.
Visit your Support Profile.
Create another support request.
Your contact information
Onechai John
<Email Edited by Host>They already have your number and/or email address and maybe have sold it several times already to others as well. They also use number generators - software that will automatically create them - some work and some don't, they don't care, they send out millions and a few will fall for it and send them money. The only way to "hide" would be to change both and your password, but then it would happen again at some point.
-
How do I post edge material on this forum for download
how do I post edge material on this forum for download.
Dropbox, box.net etc...
Then post the link. -
how to burn a video produced in iMovie in iDVD: with gratitude for the advice received I used the "professional quality" setting in iDVD for a video which in iMovie is 1h 20min long. however this also failled. where did I go wrong, please?
the message sked me to alter the quality of the DVD as the content was too large for the quality sellected.
PLEASE HELP again,
THANK YOU VERY MUCH
MIchaelCheck the Advanced ➙ Project Information menu option to make sure the playing time of the entire project, movie plus menu is below the 120 minute limit.
OT -
I am buying an Epson scanner. I am told it is compatible with an Apple Computer, is that correct? I have been told to get Acrobat XI Pro as the software for the scanner. Is that correct? Will this also scan handwritten documents into a Word document?
"I am buying an Epson scanner. I am told it is compatible with an Apple Computer, is that correct?"
We have no idea, and it isn't really our thing.
"I have been told to get Acrobat XI Pro as the software for the scanner. Is that correct?"
Acrobat XI Pro is available for Mac and is an excellent tool for making PDFs. We can't say whether it will work with the scanner. It depends what drivers Epson provide.
"Will this also scan handwritten documents into a Word document?"
That's not what Acrobat is for. It is for making PDFs. To make handwritten documents into Word documents, you'd just scan as graphics, and insert each graphic on a new page of the Word document. They will remain pictures of text, not something you can edit or copy/paste. -
i create an id. on review option when i enter visa card and security code, it always gives an error msg "Invalid Secruity code". but i use this code for money withdraw from ATM and for shopping also. plz tell the solution ????
The code they are asking for is the last three digits of the number on the back of the card (you don't use this when using an ATM or presenting the card in shops).
-
I cannot play music from my itunes library. I keep getting an itunes message that says, “The song could not be used because the original file could not be found.” Is there a fix for this? Has this happened to anyone else? Is there a fix for this? Thank you.
Hello Turintest2,
I am having a similar problem. I have over 4000 songs giving me this error. I certainily don't want to go in one by one and find them. I know you wrote a script for Windows but I am a Mac user. Is there a fix for me? Here is the info on where the song is currently (used by doing the get info)
Here's a shot of my preferences:
Just FYI, I know that apparently iTunes is looking for this music in the trash. However, if I go here:
Then I find the music there as well. (Which is where it is in my preferences.)
Please help! I don't want to have to go through over 4000 songs and update them one by one. -
Whenever i click the link for a great app i found, to go to the app-store, the app store reply is " could not complete your request" this happen for every app link that i persue! Need help
Try signing out of your account and then sign back in and see if that helps.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try again. -
Alright,so i lost my iPod and with icloud i found it... this is the first time this has happen to me. Should i call the cops for they could recover it or another option ?
Hi Odd_Franky,
Welcome to the Apple Support Communities!
Please follow the recommendations in the following article if your iOS device is lost or stolen.
If your iPhone, iPad, or iPod touch is lost or stolen
http://support.apple.com/kb/HT5668
Have a great day,
Joe
Maybe you are looking for
-
Issues with WebDav over SSL via Terminal Server when Accessing SharePoint 2013
Hi All, We have deployed a terminal server from which multiple users access and heavily use SharePoint 2013 (hosted on a separate server). The SharePoint site is published to the internet and is operating over an SSL certificate. Over the last few mo
-
Live Cache Failed (DBM error)
Hi, I am getting following error while starting live cache(LC10) "Error DBMCLI_COMMAND_EXECUTE_ERROR when starting liveCache LC1 on server system" Server: system Users: SAPUSER Logical Command: DBMRFC Parameter: exec_lcinit restart Name and Server
-
hello, my problem already mentioned here . Arabic parameters with web,show_document using parameters form not working i'm using Fusion 11g form & report 11g. my report support arabic, database also support arabic. my problem happen when i run my rep
-
Need help with dependent lists boxes with ADF.
Hello, I am doing a project that use tree dependent list boxes. Ex. State----> College----> List of courses of the college chosen above-----> The way this should work is when I select the state automatically I want it to change to the correspondent l
-
Exiting from a function module.
Hi, I have a function module in which i am extracting output message from NAST based on vbeln. I record is not found, then i am updating return table with error message using 'MESSAGE_TEXT_BUILD'. Now i have to exit from the function module as my sel