Found random files in trash - date/time when I wasnt home

I noticed today while looking in my trash bin, that there were pictures that were not mine or that I havent even seen before (ie Denzel Washington at a hospital, planes, emoticons, ect...) All the items are dated at times when I am either not at home or asleep, and with no one physically using my computer at all. I am very confused, and slightly scared that my computer is being hacked. Has anyone dealt with the same issue? Should I be concerned? Also my gmail account notified me of an unauthorized access from Illinois and prompted me to change my password. Any help or suggestions would be greatly appreciated. Thank you in advance!!

you probably haven't heard of iGhost? it's real
Open Console (in Applications/Utilities) and look for system.log under FILES, look for the the time when you claim you wasn't at home or when the files where deleted, you can paste them here for us to look into. Or, right cilck the files in the Trash and click Put Back, then search in Finder for the name of the file to see where it came from.

Similar Messages

Dps file automatically opening multiple times when working on another file in the same folio?

dps file automatically opening multiple times when working on another file in the same folio? Can anybody please help

Can you try resetting your preferences first and see if that helps - see Troubleshooting 101: Replace, or "trash" your InDesign preferences

Save the file and give date & time stamp

1. Reading the Excel file from the selection screen as a parameter.
2. Using F.M. ALSM_EXCEL_TO_INTERNAL_TABLE reading Excel file into
    Internal table.
3. Implementing the Business Logic.
4. Move output to Final Internal table.
5. Final internal table should generate a Flat file. By using GUI_DOWNLOAD.
6. That flat file should be saved with the name and location given in the Excel.
7. When ever I run the program output file will generate in the same location but with date and time stamp. Because Im running the program for range of employees say initially I run for 1 10,000 employees next 10,001- 20,000 like that.
Whenever I run for 2nd time it will overwrite the previous output, thats the reason Im using date and time stamp.
Eg:
PERSONAL Numbers              Name                                         Location
00000001                 xxxxx-24.04.2007-10.30          C:\
00000002                 xxxxx-24.04.2007-10.35
00000003                 xxxxx-25.04.2007-10.40
00000004                                  xxxxx-25.04.2007-10.30
Can any one help me how to save the file and give date & time stamp through hardcode?
please help me in this issue.

I am not clear with your problem. Based on the understanding of your question,
there can be two cases.
1- U want to insert time stamp in the output file.
2- Time stamp is already there, u just have to solve the overwriting issue.
If your question goes with option 2, You can make use of import parameters
<b>CONFIRM_OVERWRITE</b> : Which will ask for confirmation before overwriting.
<b>APPEND</b> : which you can choose either to append the data to the existing file or overwrite it.
Please inform if the issue is not resolved.
Message was edited by:
        BINU RAJ BINU

Can we find out the date/time when the datafile last extended?

Hello all,
Can we find out the date/time when the datafile last extended?
Is it possible to find out from the alert.log file?
Correct me if I am worng?
Thanks in advance
Himanshu

In continuation with the earlier post, can you tell me what sort of entry should be search if the above information is available in the alert.log file?
Thanks
Himanshu

PSE13 and Revel issues with the notes filed and date/time when syncing.

I extensively use the notes field in PSE13. For photos and videos this seems to get over-written when synced to Revel. For photos I can recover it by selecting 'Update Thumbnail' but during the next sync it over-writes it again.
I also have some files where the date / time are changed when syncing with Revel, particularly video files.
Any ideas?

I also have this problem. The time of my iPod always changes back to the time and date of my last restore every time I sync it. And I know of others with this problem also. Perhaps it is possible that your iPod and mine have been "configured" in a way that causes this issue?

How to populate date & time when user enter data for custom table in sm30

Can anyone tell me How to populate system date & time when user enter data for custom table in sm30..
Req is
i have custom table and using sm30 user can enter data.
after saving date i want to update date & time in table
Pls let me know where to write the code?
Thanks in Advance

You have to write the code in EVENT 01 in SE54 transaction. Go to SE54, enter your Ztable name and in the menu 'Environment-->Events'. Press 'ENTER' to go past the popup message. In the next screen, click on 'New Entries'. In the first column, enter 01 and in the next column give some name for your routine(say UPDATE_USER_DATE_TIME). Then click on the souce code icon that appears in blue at the end of the row. In the code, you need logic like below.
FORM update_user_date_time.
DATA: f_index LIKE sy-tabix.
DATA: BEGIN OF l_total.
          INCLUDE STRUCTURE zztable.
INCLUDE STRUCTURE vimtbflags.
DATA END OF l_total.
DATA: s_record TYPE zztable.
LOOP AT total INTO l_total.
    IF l_total-vim_action = aendern OR
       l_total-vim_action = neuer_eintrag.
      MOVE-CORRESPONDING l_total TO s_record.
      s_record-zz_user = sy-uname.
      s_record-zz_date = sy-datum.
      s_record-zz_time = sy-uzeit.
      READ TABLE extract WITH KEY l_total.
      IF sy-subrc EQ 0.
        f_index = sy-tabix.
      ELSE.
        CLEAR f_index.
      ENDIF.
      MOVE-CORRESPONDING s_record TO l_total.
      MODIFY total FROM l_total.
      CHECK f_index GT 0.
      MODIFY extract INDEX f_index FROM l_total.
    ENDIF.
ENDLOOP.
ENDFORM.                    " UPDATE_USER_DATE_TIME
Here ZZTABLE is the Z table and ZZ_USER, ZZ_DATE, and ZZ_TIME are the fields that are updated.

Batch file - how to Date & Time Format as January 6, 2014 - 8:54 PM Eastern

Batch file - how to Date & Time Format as January 6, 2014 - 8:54 PM Eastern

Hi Dhiravia,
If you want to convert the month format, please refer to the batch script below:
SET Month=%DATE:~4,2%
if %Month%==01 set Month=JAN
if %Month%==02 set Month=FEB
if %Month%==03 set Month=MAR
if %Month%==04 set Month=APR
if %Month%==05 set Month=MAY
if %Month%==06 set Month=JUN
if %Month%==07 set Month=JUL
if %Month%==08 set Month=AUG
if %Month%==09 set Month=SEP
if %Month%==10 set Month=OCT
if %Month%==11 set Month=NOV
if %Month%==12 set Month=DEC
echo %Month%
To convert the date format via cmd, please also check this article:
http://myblog4fun.com/archive/2012/01/06/getting-the-current-date-and-time-from-bat-files.aspx
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do I retrieve a file from Trash using Time Machine in Mavericks?

Is it even possible to retrieve a file from Trash from a Time Machine backup? Does Time Machine even back up the Trash? I've been told a total restore from a Time Machine backup will put the past Trash back on the Mac, but what if I just want to restore an individual file?
Shortly after emptying my Trash on my Mac (10.9.4) for the first time in weeks, I realized I needed one of the files I'd just erased. Trying to retrieve with Time Machine was not fruitful, however, because I couldn't find the file on any of the past backups using the normal Enter Time Machine interface. However, I know it would have been in the Trash during all of the most recent backups.
So I researched how to find the backups of Trash with Time Machine, but I think all of the solutions I found on various online forums were pre-Mavericks and do not seem to work now. I've basically tried 2 things:
Show Trash in Finder using the Terminal command: open ~/.Trash
It shows the hidden Trash folder in Finder, located in Macintosh HD/Users/User. For easy access, I added the .Trash folder to the Finder Sidebar. But I can't get to it in the backups. The Trash shortcut in the Finder Sidebar is always grayed out in the old backups using the Time Machine app. And it does not show up in ~ when looking through the backups.backupdb folder on my external HD.
I also tried the Terminal command to show all hidden files in Finder: defaults write com.apple.finder AppleShowAllFiles YES
But while many hidden files do suddenly appear in Finder, curiously, the User's .Trash folder is not one. This is true for the Finder of the Mac, the backups.backupdb folder on the External HD, and Time Machine app.
Thanks.

How do I retrieve a file from my backup in Time Capsule?
It depends on the type of file that you are trying to retreive.
In general.....
Open Time Machine by clicking on the clock icon on the dock
Wait a few minutes for Time Machine to fully load
Use the timeline at the far right of the window to go back in time to a date when the file was still on your Mac
Click that date
Navigate using the Finder interface to locate the file that you want
Click on the file to highlight it
Click Restore at the lower right of the window to be brought back to the present
You have to retrieve other types of files differently. For details, see:
http://pondini.org/TM/28.html

Datalogging with options to retrieve subset of log file based on date/time

I would like to thank this forum for useful advice so far in completing my LabVIEW software.
I have a data logging challenge. I am supposed to log about 30 parameters every 5 seconds. Some of these parameters are digital (ON/OFF), some are values of speed (rpm) and others, an expression of a percentage (%). It should be possible in future to do a histogram or bar chart plot of some of the parameters, for a specific period range (say the last 5 minutes of a certain day). So in effect, do an extraction of a segment of the total log file.
My challenge is if I use text file, like the one in the attached VI, can it give functionality of retrieving data (while the VI is running) from the log file, based on a certain time range (i.e. retrieve a section of the log file based on a certain date/time range, on demand)?
The format in the text file is close to what I require, since it lists the time n one column and the other parameters on other columns to enable future histogram generation.
Thanks a lot, friends.
Solved!
Go to Solution.
Attachments:
writer.vi ‏19 KB
time.txt ‏1 KB

Hey maxidivine,
Iv been playing round with your code and found that to perform the search that you require could be quite demanding to system resources when scaled to the size of your application I shall try and find a way to perform the search using .txt files but the there are some other options available. I recommend the use if TDMS files as the file format is a very efficient, manageable method of data-logging. The TDMS file format is designed to write and read measured data at a very high speed, while maintaining a hierarchical system of descriptive information.
Traditionally, TDMS was a National Instruments only file format – you could only read it using our products – LabVIEW/CVI/DIAdem. However, thanks to the popularity of the format, a bolt-on is now available for Excel, which allows you to directly open the .tdms files with Excel (see link).
National Instruments Technical Data Management Overview
http://zone.ni.com/devzone/cda/tut/p/id/3676
Introduction to LabVIEW TDM Streaming Vis
http://zone.ni.com/devzone/cda/tut/p/id/3539
VI-Based API for Writing TDMS Files
http://zone.ni.com/devzone/cda/tut/p/id/6471
TDM Excel Add-In Tool for Microsoft Excel User Guide
http://zone.ni.com/devzone/cda/tut/p/id/4906
TDM Excel Add-In for Microsoft Excel Download
http://zone.ni.com/devzone/cda/epd/p/id/2944
Troubleshooting the TDM Excel Add-In for Microsoft Excel 2000-2003
http://zone.ni.com/devzone/cda/tut/p/id/5874
Examples of the use of the TDMS API ship with LabVIEW. You will find them in HELP > find examples > fundamentals > File Input and Output. For you application, I would recommend the “Cont Acq&Graph Voltage - Write Data to File (TDMS).vi”.
Furthermore, if you require some help with DIAdem, I would recommend clicking "getting started" from the DIAdem splash screen. This opens a manual which discusses everything from data analysis to report generation. Also, if you have DIAdem 11 or above, there are tutorial videos which install with DIAdem. These are useful little tutorials, which discuss all the DIAdem fundamentals. You can access these by selecting a particular palette tab (eg. report, view, analysis...etc) and then clicking the tutorial button (shown as a film strip with a question mark) at the top of the group view.
Here are some more helpful DIAdem related resources for future reference.
Report Gen in DIAdem...
http://zone.ni.com/devzone/cda/tut/p/id/7379
DataPlugins: Supported Data Formats (ni.com/dataplugins)
http://zone.ni.com/devzone/cda/tut/p/id/4065
Hope this is helpful
Philip
Philip
Applications Engineer
National Instruments
UK Branch
===If this fixes your problem, mark as solution!===

How to save an e-mail as an .eml format and customize the name of the file, for example the name of the file would be "date, time, sender, title"?

It would be fantastic if when saving my e-mails to my computer the file name could be customized to be something different that just the title of the message. As I suggested in the question if it could be set up to be "date, time, sender, title" it would be great, a lot of help when passing an .eml file between co-workers, or simply organizing your e-mails in folders. Is it possible and if yes, how is it done?

Install [https://addons.mozilla.org/en-us/thunderbird/addon/importexporttools/ ImportExportTools] and adjust the Options (see picture).
http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html

How do I preserve date/time when converting to DNG?

When I convert a file to DNG format in Lightroom, it changes the capture time in the metadata to the current date and time, rather than copying the source data. Is there a way in which I can tell it to leave my dates alone?

You wrote: “I noticed my mistake. It seems that what the conversion process was changing was the ‘Metadata Date’ and ‘Date Time’ fields, but ‘Date Time ‘" and ‘Date Time Digitized’ were remaining the proper, original date. The cause of my confusion was that my Metadata panel view was hiding all but the ‘Date Time’ field, so it appeared as though it had overwritten my prior date information.”
Date/times in photo metadata can be very confusing. There are all these fields with confusing names imposed by legacy industry standards -- I challenge anyone except a metadata nerd like me to remember the meanings and differences of Date/Time, Date/Time Original, Date/Time Digitized, Capture Time, Metadata Date, Modify Date, .... The worst are the two XMP fields Date Created and Create Date, which have two very different meanings! And every app and operating system makes a half-hearted attempt to "simplify" it for the user by choosing different names.
LR makes no serious attempt to make this easy for the user, and over the first several versions, it's handling of date/times was pretty sloppy. (It still has outstanding bugs that don't crop up that often in practice.) You would think that at least LR would provide roll-over tool tips on the field names in the Metadata panel explaining each field.

Find date/time when item added item in folder?

Hey guys,
I was wondering if there was any Automator Action out there that allows you filter finder items by date "added" to a folder.
Please don't confuse with the date of the actual item. I am talking about if there is anyway to be able to detect and find when an item was added into a folder.
Thanks. I hope there is something out there. If not then I hope that there is some sort of applescript that can do this.
Please help.
Phil

I'm not aware of an Automator action, but starting in OS X 10.7 Lion a Spotlight metadata attribute named kMDItemDateAdded was added that contains the ISO date/time an item was added. If the item has been moved recently enough to have the attribute (and assuming that Spotlight is indexing the containing folder), there are a couple of utilities you could use.
The mdfind shell utility won't be quite like filtering, but by limiting the find search to a particular folder and using the appropriate query, you can get a list of items - for example, the following will list items added to the Downloads folder in the last week:
do shell script "mdfind -onlyin ~/Downloads 'kMDItemDateAdded >= $time.today(-7)' "
The mdls shell utility can be used if you are just wanting to get the value of a particular metadata attribute from an item, for example:
set theFile to quoted form of POSIX path of (choose file)
do shell script "mdls -name kMDItemDateAdded -raw " & theFile

Autofill date/time when entering data?

Hi,
I'm new to Numbers so still learning the ropes, but...
I have made a call log which should automatically enter the date and time when I enter data into a 'Notes' field. This works for the first instance but when a new call is received and I add a new note the date and time changes for all previous notes.
The formula I am using is as follows:
IF(ISBLANK(F3),,NOW())
I have tried to attach the numbers file bu struggling to see how so I've attached a screenshot which might be of use.
Any help greatly appreciated!

the function now() atucally returns now. That is... the date and time it is at the very moment the function is called. You are asking for a timestampt. The best way to implement a timestamp (which technically Numbers DOES NOT HAVE) is to keep a single cell table in a handy place (I keep it in the top left corner), then put the formula:
=now()
in the single cell.
When you add a new entry, select that single cell, copy, then paste formula result.
this can be done quickly when you memorize the key combinations:
copy = <command> + c
paste fomula result = <command> + <shift> + v
You can make suggestions to Apple using the menu item "Numbers > Provide Numbers Feedback"

How do I keep the date/time when exporting photos?

When exporting photos from Photos.app on my Mac, it doesn't use the metadata that it displays in Photos--it uses the current date/time. So when I export a photo from 2010, it says it's dated 2015 when I import it into Aperture.
Is there a way to export an image with its original timestamp? Is this a bug? Thanks.

If you are editing tif files, then you have only a couple of choices.
Flatten the image before you save it. This will reduce it down to one layer. That's the smallest you can get.
When you first open the image, look to see if it's 8 bit or 16 bit tif. It won't help you, but if the image is 8 bit, and you save it as 16 bit, you will have dramatically increased the size of the file for nothing. If it's started as 16, no worries!
check if you are saving with compression. Tif compression is lossless, so unless you did something like resize+resample, it remains the same bit density, etc, so should be just as printable as what they sent you (unless you messed up!).
Cheers!

Retaining date/time when capturing from miniDV camcorder in PRE8

Has anyone a solution to the following problems observed when capturing
video/audio from a miniDV camcorder with Premiere Elements 8:
1) Even if "Split Scenes" is deselected in the capture dialog box - the captured video IS split into separate .avi files
2) When inspecting the .avi file metadata only the date is captured correctly from DV - time is always 23:00Z...? I have used other capture tools to verify that correct date/time is actually available in the captured video.
Thanks!
- Jan Anders

No known solution for PRE:
Timecode in AVI-Files
View video clip recording date in PRE7?
Cheers,
Neale
Insanity is hereditary, you get it from your children

Found random files in trash - date/time when I wasnt home

Similar Messages

Maybe you are looking for