Found something very cool in 2.2..

Apparently, you cannot download a podcast larger than 10MB over 3G/Edge; however, you can still listen to it by clicking on the title in iTunes on the iPhone. 3G is having issues in my area right now so I'm using Edge for the next couple of days; I tested it this morning and I can listen to all the podcasts just fine as it is streaming them instead of downloading them. Nice, eh? Hopefully they don't change this...I like being able to stream them instead of downloading them.

The link to the Skype Community is pointing at www.skype.com/go/community - and this link will redirect you to the best choice language community depending on the language preference in your browser and internet access point location.
Any of these two parameters on your setup might be leading us to believe your are a Russian speaker?
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Similar Messages

Found something very strange about Memory Bandwidth

Okay ever since I posted my 3.2Ghz overclock thread i've been doing some testing...
rolling back to 3Ghz from 3,2Ghz gives me 100% stability with prime95, which isn't that weird, BUT!
When I boot with a FSB of 250 (3Ghz) DDR400 (200Mhz) (4:5 divider) in the BIOS and run a memory bandwidth test in SiSoft Sandra I get a memory score of
~4800Mb/s
Which isn't that strange... A good score..
When I boot with a FSB of 267 (3,2Ghz) DDR427 (213,5Mhz) (4:5 divider) in the BIOS and run a memory bandwidth test in SiSoftware Sandra I get a memory score os
~5150Mb/s
Which isn't eithat that strange, a resonable gain considering the few extra Mhz I pumped out of the DDR (running at 2,5-3-3-6).
But here comes the really really strange part...
I boot with a FSB of 267 (3,2Ghz) into windows..
I change the FSB to 250 (3Ghz) with CoreCenter or ClockGen..
DDR goes back to 200Mhz (DDR400) (this all confirmed with Z-CPU)
I run a memory Bandwidth test in SiSoftware Sandra (restarted the program, not just running another one on top) and I get a memory score of...
....~5150Mb/s
I get similar scores running other benchmarks (in this case Aquamark3) that would suggest that there is a much greater performance loss in setting the BIOS FSB to 250Mhz rather than setting it to 367Mhz then lowering it in windows.
Does anyone have any idea why this happends?
I am really interested in peoples theories
Neo2-LS 1.8
P4 2,4C @ 3Ghz | 1Ghz FSB
2x256M Dual DDR400 @ 2,5-3-3-6-8 200Mhz
Radeon 9500PRO
Antec TruePower 430W

the 367 in the end is a typo, ment to say 267... ~1050Mhz FSB - 3,2Ghz for a 2,4C
Quote
Originally posted by goalie20
Maybe I'm not reading your post carefully enough-(its been along day)but on the final configuaration what are your memory timings? Also did you mean to say setting timings to 267 as opposed to 367?
My DDR timings are listed at the end of my post.. The same timings are used when i'm running at 3Ghz and 3,2Ghz. 2.5-3-3-6
At 3Ghz with a DDR Speed of 333 I get 400Mhz (200Mhz per module) running FSB 250 (from 200)
Quote
Originally posted by REILLY875
I am confused to... When you say 367MHZ do you mean memory speed at a 5:4 ratio?..Sean REILLY875
Yes i'm running at a 5:4 ratio.. 367 is a typo, I ment to say 267 and I ment the FSB not the memory..
Quote
Originally posted by NovJoe
What is your DRAM speed set as in BIOS?
What does your DDR Clock in BIOS shows?
Check with CPUZ and see what Freq x 2 is your RAM running at?
The DRAM Speed is left at 4:5 (333) and the speed is 427Mhz when booting to 3,2Ghz (FSB 267)
The DRAM Speed is left at 4:5 (333) and the speed is 400Mhz when booting to 3Ghz (FSB 250)
READ THIS CAREFULLY
Okay, to put this simply...
Overclock in BIOS to 3Ghz with a DDR Ratio of 5:4
BIOS FSB: 250
BIOS DDR: 400
Sandra Memory Bandwidth Benchmark Score: ~4800Mb/s
Overclock in BIOS to 3,2Ghz with a DDR Ratio of 5:4
BIOS FSB: 267
BIOS DDR: 427
CPU Speed: 3,2Ghz
Sandra Memory Bandwidth Benchmark Score: ~5150Mb/s
So far nothing strange, okay?
-This is where it gets tricky...-
Overclock in BIOS to 3,2Ghz with a DDR Ratio of 5:4
BIOS FSB: 267
BIOS DDR: 427
CPU Speed: 3,2Ghz
In Windows I change the FSB back to 250.
FSB: 250
DDR: 400
CPU Speed: 3Ghz
Sandra Memory Bandwidth Benchmark Score: ~5150Mb/s
To cut this short...
I get more memory bandwidth when booting to 3,2Ghz than 3Ghz even though when i'm in windows I change back to 3Ghz from 3,2Ghz.¨
Any more questions? =)
This is really easy if you just read it all closely and if I don't make any more typos :D

VERY COOL: the web app for review & approve

I have downloaded the package at
http://developer.apple.com/samplecode/FinalCutServerIntegrationSample/
read the readme, which is actually a manual, and set up everything accordingly. And now I have a very cool web app for review & approve with the same look and feel as the client. This is such a great feature that I really have no clue why apple is hiding it. There are third party apps that are less cool and cost a lot and don't send comments and flag back to FCsvr as this web app does.
And the best thing: it's very easy to install.
willard

Don't give up so soon..
Delete all XML files in the xmlin folder. try it again and when you see in "search all jobs" go to the administrator/log panel en double click on the upmost row (the one that inform you that the script has run). If it says cannot read XML file, the go to the xmlin folder and check if there is a new XML file. There probably is but not with the title you gave to the asset. This means that the script had problems assigning the title to the name of the XML file.
Try now uploading a new file. Don't change the filename and give a tite of something without spaces. See if it works then.
Also be aware that you set the priority probably to medium. A normal device scan would probably stop this.
willard
Message was edited by: Willard Jansen

Malicious or not? Message popped up: Mozilla security found (something like too much, forget exact word) activity on your computer so it will do a fast scan of system file. With OK button.

I was looking at youtube.com, which always tells me my browser is not supported and recommends I download Firefox, but that is what I was using, so I went to Firefox to check for updates. (I think I also had freecycle.org open.) Then this message popped up in a new page: Mozilla security found (something like "too much", forget exact word) activity on your computer so it will do a fast scan of system file. There was an OK button. The page address was: http://update17.stegner.ce.ms/index.php?Q7Lhl9ShbRxGJXpkM1VLSi4ZE8H4pTedoVPySgeppM3VpC+thEspcFG7qxHgn1pdsC2h5ygPGWI3t5hXqMzL9EQaZZ3J1e3CKXgCb0Qp. I did not click OK but copied the link and closed the window which closed the internet. I have never seen this before and would like to know if it is really Mozilla or possibly something malicious. Thank you.

Good catch. That almost certainly is an invitation to download malware.
There are a lot of infected web sites pushing "fake antivirus" software. If you have any doubts about whether your system might have become infected, you can supplement your regular security software with these two highly regarded scanners:
Malwarebytes Anti-malware : http://www.malwarebytes.org/mbam.php
SUPERAntiSpyware : http://www.superantispyware.com/

Trying to do something very strange with layouts and painting components

I'm trying to do something very strange with changing the layout of a container, then painting it to a bufferedImage and changing it back again so nothing has changed. However, I am unable to get the image i want of this container in a new layout. Consider it a preview function of the different layouts. Anyway. I've tried everything i know about swing and have come up empty. There is probably a better way to do what i am trying to do, i just don't know how.
If someone could have a look perhaps and help me out i would be much appreciative.
Here is a self contained small demo of my conundrum.
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Graphics2D;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.image.BufferedImage;
import javax.swing.BoxLayout;
import javax.swing.ImageIcon;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.border.LineBorder;
// what is should do is when you click on the button "click me" it should place a image on the panel of the buttons in a
// horizontal fashion. Instead it shows the size that the image should be, but there is no image.
public class ChangeLayoutAndPaint
     private static JPanel panel;
     private static JLabel label;
     public static void main(String[] args)
          // the panel spread out vertically
          panel = new JPanel();
          panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
          // the buttons in the panel
          JButton b1, b2, b3;
          panel.add(b1 = new JButton("One"));
          panel.add(b2 = new JButton("Two"));
          panel.add(b3 = new JButton("Three"));
          b1.setEnabled(false);
          b2.setEnabled(false);
          b3.setEnabled(false);
          // the label with a border around it to show size in a temp panel with flowlayout to not stuff around
          // with the actual size we want.
          JPanel thingy = new JPanel();
          label = new JLabel();
          label.setBorder(new LineBorder(Color.black));
          thingy.add(label);
          // the button to make things go
          JButton button = new JButton("click me");
          button.addActionListener(new ActionListener(){
               public void actionPerformed(ActionEvent e)
                    //change layout
                    panel.setLayout(new BoxLayout(panel, BoxLayout.X_AXIS));
                    panel.doLayout();
                    //get image
                    BufferedImage image = new BufferedImage(panel.getPreferredSize().width, panel.getPreferredSize().height, BufferedImage.TYPE_INT_ARGB);
                    Graphics2D g = image.createGraphics();
                    panel.paintComponents(g);
                    g.dispose();
                    //set icon of jlabel
                    label.setIcon(new ImageIcon(image));
                    //change back
                    panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
                    panel.doLayout();
          // the frame
          JFrame frame = new JFrame();
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          frame.setSize(400,200);
          frame.setLocation(100,100);
          frame.getContentPane().add(panel, BorderLayout.NORTH);
          frame.getContentPane().add(thingy, BorderLayout.CENTER);
          frame.getContentPane().add(button, BorderLayout.SOUTH);
          frame.setVisible(true);
}

Looks like you didn't read the API for Container#doLayout().
Causes this container to lay out its components. Most programs should not call this method directly, but should invoke the validate method instead.
There's also a concurrency issue here in that the panel's components may be painted to the image before revalidation completes. And your GUI, like any Swing GUI, should be constructed and shown on the EDT.
Try this for size -- it could be better, but I've made the minimum possible changes in your code:import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Graphics2D;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.image.BufferedImage;
import javax.swing.BoxLayout;
import javax.swing.ImageIcon;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
import javax.swing.border.LineBorder;
public class ChangeLayoutAndPaint {
private static JPanel panel;
private static JLabel label;
public static void main(String[] args) {
    SwingUtilities.invokeLater(new Runnable() {
      @Override
      public void run() {
        // the panel spread out vertically
        panel = new JPanel();
        panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
        // the buttons in the panel
        JButton b1, b2, b3;
        panel.add(b1 = new JButton("One"));
        panel.add(b2 = new JButton("Two"));
        panel.add(b3 = new JButton("Three"));
        b1.setEnabled(false);
        b2.setEnabled(false);
        b3.setEnabled(false);
        // the label with a border around it to show size in a temp panel with flowlayout to not stuff around
        // with the actual size we want.
        JPanel thingy = new JPanel();
        label = new JLabel();
        // label.setBorder(new LineBorder(Color.black));
        thingy.add(label);
        // the button to make things go
        JButton button = new JButton("click me");
        button.addActionListener(new ActionListener() {
          @Override
          public void actionPerformed(ActionEvent e) {
            //change layout
            panel.setLayout(new BoxLayout(panel, BoxLayout.X_AXIS));
            //panel.doLayout();
            panel.revalidate();
            SwingUtilities.invokeLater(new Runnable() {
              @Override
              public void run() {
                //get image
                BufferedImage image = new BufferedImage(panel.getPreferredSize().width,
                    panel.getPreferredSize().height, BufferedImage.TYPE_INT_ARGB);
                Graphics2D g = image.createGraphics();
                panel.paintComponents(g);
                g.dispose();
                //set icon of jlabel
                label.setIcon(new ImageIcon(image));
                //change back
                panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
                //panel.doLayout();
                panel.revalidate();
        // the frame
        JFrame frame = new JFrame();
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setSize(400, 200);
        frame.setLocation(100, 100);
        frame.getContentPane().add(panel, BorderLayout.NORTH);
        frame.getContentPane().add(thingy, BorderLayout.CENTER);
        frame.getContentPane().add(button, BorderLayout.SOUTH);
        frame.setVisible(true);
}db
edit I prefer this:import java.awt.BorderLayout;
import java.awt.Graphics;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.image.BufferedImage;
import javax.swing.*;
public class LayoutAndPaint {
JPanel panel;
JLabel label;
public static void main(String[] args) {
    SwingUtilities.invokeLater(new Runnable() {
      @Override
      public void run() {
        new LayoutAndPaint().makeUI();
public void makeUI() {
    JButton one = new JButton("One");
    JButton two = new JButton("Two");
    JButton three = new JButton("Three");
    one.setEnabled(false);
    two.setEnabled(false);
    three.setEnabled(false);
    panel = new JPanel();
    panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
    panel.add(one);
    panel.add(two);
    panel.add(three);
    label = new JLabel();
    JButton button = new JButton("Click");
    button.addActionListener(new ActionListener() {
      @Override
      public void actionPerformed(ActionEvent e) {
        layoutAndPaint();
    JFrame frame = new JFrame();
    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    frame.setSize(400, 400);
    frame.add(panel, BorderLayout.NORTH);
    frame.add(label, BorderLayout.CENTER);
    frame.add(button, BorderLayout.SOUTH);
    frame.setLocationRelativeTo(null);
    frame.setVisible(true);
private void layoutAndPaint() {
    panel.setLayout(new BoxLayout(panel, BoxLayout.X_AXIS));
    panel.revalidate();
    SwingUtilities.invokeLater(new Runnable() {
      @Override
      public void run() {
        BufferedImage image = new BufferedImage(panel.getPreferredSize().width,
            panel.getPreferredSize().height, BufferedImage.TYPE_INT_ARGB);
        Graphics g = image.createGraphics();
        panel.paintComponents(g);
        g.dispose();
        label.setIcon(new ImageIcon(image));
        panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
        panel.revalidate();
}db
Edited by: DarrylBurke

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

Have you run it in a debugger? That will show you exactly what is happening and why.

Something very strange in Flash 8

I am new for Flash, but I have found something strange in
Flash 8. Please start a new document and put component Button to
library. Next please start Control/Debug Movie. In upper window
please click _level0, in lower: tag Variables and next :
+focusManager, in this there is + form, in this is next
focusManager, and next +form - probably up to infinity. I tried 20
times.
Jacek

timerClip can be referenced by code in frame 16, that
executes after your gotoAndStop(24), but code in timerClip, even in
its first frame, will not execute until the playhead actually
enters frame 24. in particular, from frame 16 you cannot reference
any functions defined on timerClip's timeline.

I'm about to hulk out guys! Brand new iPhone 5 and need to update iTunes for recognition. Keep getting "the installer encountered an error that caused the installation to fail." Can anyone help? I may smash something very soon.

I'm about to hulk out guys! Brand new iPhone 5 and need to update iTunes for recognition. Keep getting "the installer encountered an error that caused the installation to fail." Can anyone help? I may smash something very soon.

iTunes:
AppName: itunes.exe
AppVer: 10.5.0.142
ModName: unknown
ModVer: 0.0.0.0
Offset: 001be6f6
Quicktime:
EventType : BEX
P1 : QuickTimePlayer.exe
P2 : 7.71.80.42
P3 : 4ea5c6ef
P4 : QuickTimePlayer.dll
P5 : 7.71.80.42
P6 : 4ea5c6d5
P7 : 00005b6d
P8 : c0000409
P9 : 00000000
That's consistent with another application (other than QuickTime) having dropped old QuickTime componentry in non-standard locations on the PC.
So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view options on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in My Computer, open your C drive.
Open the "Windows" folder.
Open the "system32" folder.
What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

How can I export the very cool Lightroom Map and link to the photos which show on the map?

How can I export the very cool Lightroom Map and link to the photos which show on the map?
I love the way Lightroom imported my .gpx files, automatically geocoded the photos, and show where I took them on the map.
Would love to export this lovely map and the photos which have been geocoded to the map.
Anyone know how to export this as an HTML file I can import into my web site.
I'm a Realtor in Berkeley, and integration of the elegant map and the photos. It would be perfect way to show my clients where the homes are, and what they look like.
Ira

You probably didn't get an answer because none exists within Lightroom.
You can perform a screen caputre of the Lightroom map, and use the resulting JPG/GIF of your screen, however there is no way to hyperlink the point on the map to your photos.
You might want to consider a non-Lightroom solution, such as uploading the photos to an Album on Flickr (or one of many other photo sharing web sites) and using the mapping capabilites there, which would be hyperlinked to your photos, see example below. You can use Lightroom to geotag the photos and then use Lightroom to upload to Flickr (or other web site) and then use the web site to create and display the map

I found something called TMCacheDelete in activity monitor. What is it?

I recently upgraded to Yosemite and have found something called TMCacheDelete in activity monitor. What is it and should I be concerned?

This is purely an educated guess ...
I suspect that is clearing out your Time Machine cache. Time Machine is your backup program that runs without your thinking about it, and backs up things that have changed since the last backup was done.
Should you be concerned? No. But by all means you should make sure you are in fact running Time Machine and keeping good backups.

My new Venture card looks very cool

EMV of course, but no numbers on the front. They are stacked on the back of the card

JamP wrote:
Like the Discover IT or old QS1 card except with a chip? Post a picture I had one of the old QS1 cards without the chip and it had all the usual stuff (name, card number, MC logo) on the front, albeit it was not embossed. From the OP's description of the Venture only the name is on the front, with the card number and network logo (MC/V) both on the back, similar to the Citi DC card. If this is correct, that is very cool indeed!

U guys SHOULD Check THIS out! very cool.

Due to the inability to "cut and paste", you'll have to Google, "Iphone Missing Manual" it's an excerpt out of a book written by David Progue, that explains very COOL iphone features....a must see!
iphone Other OS

It's surprising that the iPhone doesn't come with help built-in.
There's too many secret items that a new user has to guess at or learn from others, from unusual double-finger gestures, to how each widget seems to have its own way of doing things, to the inconsistency of when the landscape keyboard can appear.
It's too easy for us UI engineers to get used to our own creations and believe they're very easy to learn
Btw, another interesting site is right here... the Apple web developer's guide for iPhone.
http://developer.apple.com/iphone/
Touchscreen laptop Other OS

Found something cool. please confirm. macbook pro users

pressing alt 5 times in a row turns off most of the keyboard.
figured it out while playin a snes emulator.
but pressing alt 5 times after you have turned the keyboard off, turns it back on. thank you. xoxo
again please comment...

Mac OS X 10.5 Help: Turning Sticky Keys and Mouse Keys on or off

I have done something very very very cool with photoshop touch!

Who could I show this too to help you potentially sell more product

You may want to market the work yourself. David Hockney creates fine art on an iPad using a £2.99 ($4.75) 'app' called Brushes which allows the user's finger to become a brush.

There's Something Very Wrong With My Macbook... Please Give Me Some Advice

I bought a new black macbook about 7 months ago:
Here are the specs:
Model Name: MacBook
Model Identifier: MacBook2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Basically, the fan noise is getting incredibly loud and very whiny, even with just microsoft word on... It is also getting very hot to the touch... And apparently, the bottom part of my macbook (the case) has a defect- its slightly popped out... I never dropped my macbook and it has always been in a case so apparently I must have bought it like that... Also, the computer won't wake up from sleep mode sometimes, and sometimes when I push the power button to turn it on, all I see is a blank white/grey screen and nothing happens...
It has only been a couple of months and I've already been to the apple store about three times... I am a student so I don't have the time to send it in for the approx. 7 to 10 wait period... and I am concerned that if I do not send my computer in soon, the computer will crash and all my school work will go with it. I do not have an alternate computer and I will have no time to turn it in for repair until june... I do not know what to do... When I went to the apple store, they tested it and said that there was nothing wrong with the sound (however this only happens when it's taken in), I know for certain that there is something wrong with the fan noise... My suitemates and friends who have the same computer as I do, do not have this problem... What should I do? Is there any way I would be able to get this computer replaced? I really do not have the time to send it in for repairs... What should I do?? Any help would be appreciated... Thank You!

Welcome to Discussions, ddalki_kiss!
Most important thing first. You didn't list the "Boot ROM Version," which is after the Bus Speed in System Profiler. I ask due to the fact that, according to this Apple Support article:
Firmware updates for Intel-based Macs
your MacBook probably required the installation of this firmware update:
MacBook EFI Firmware Update 1.1
It isn't a question of whether or not that update was downloaded, but whether it was installed. Checking how System Profiler shows the "Boot ROM Version" is one way to find out if it was successfully installed. If it was not, download and install it, being careful to follow instructions and cautions.
It is also getting very hot to the touch...
First, the firmware update might help. Second, it is getting very hot due to the fans not being able to keep it cool enough despite running at higher speed. Can we assume that you are not using the MacBook as a laptop, but are following the cautions that it is a notebook and must have air circulation beneath it?
...sometimes when I push the power button to turn it on, all I see is a blank white/grey screen and nothing happens...
You should boot into safe mode:
http://docs.info.apple.com/article.html?artnum=107392
http://docs.info.apple.com/article.html?artnum=107393
http://docs.info.apple.com/article.html?artnum=107394
Booting into safe mode could be remedial for your MacBook. You should then restart your MacBook to return to normal use, as you will be unable to remain in safe mode and have normal use of your Mac.
If you have further problems, or if you resolve the current ones, please repost:)
Message was edited by: myhighway

Found something very cool in 2.2..

Similar Messages

Maybe you are looking for