Four feet not laying flat?

I notice that my new MBP's four little round foot pads are not perfectly level. The front right corner is a bit raised.
In other words, touching the other three corners doesn't cause the MBP to rock at all, but touching the front right corner makes the MBP move a bit up and down in that corner.
This could get to be annoying. Is this something other people have experienced? And how does one fix it short of sending it back to Apple just for this little external thing.
Is getting the four corners to lay perfectly flat so difficult?
doug

I called Apple Care and interestingly enough they suggested the same thing. I'm going on a business trip to Shanghai on Wednesday, but when I get back they want to pick it up and check it out.
But the weird thing is this... I just put the MBP to sleep and turned it upside down to see if I could detect any warping. I really couldn't. When I turned it right-side up again it was lying flat!
Have you heard of such a thing?
doug

Similar Messages

CD JAMMED- not laying flat inside??

I have an iBook G4 and inserted a CD into the slot on the side. It automatically made an extremely strange noise that has never been made before. It did not read the CD, and when I tried to eject it, it would not do anything. It made very strange sounds like the CD was not laying flat inside the slot or something.
I have tried rebooting and holding down the trackpad.... but that didn't work.
It sounds like the CD is off the track (if that's possible) inside the computer, or it's not centered or its not laying in the right spot.
Any suggestions are appreciated!!! (It's very hard to describe what is going on without being able to hear it.)
Thanks a bunch

Hey Allen -
Do you still have a warranty going? Sounds like a job for Apple because it's a hardware issue of some sort. You've already tried holding down the trackpad while starting and that didn't work and that's about all the help you can get in a forum. I can only suggest trying again with the trackpad button or try it with the eject button.
I wonder if it's a different foreign object and not a cd/dvd. It could be a label off a cd/dvd.

Closed lid not laying flat

I just purchased a hp refurbished chromebook 14 and when it arrived I started setting it up and checking all the keys were working and good to go until i was all done and closed the lid of the device. When I closed the lid I noticed that it doesnt quite lay flat. As I looked closer the left side appears normal and does lay flat but as you come around the front it starts to open slowly until the front right is slightly open about 2-3cm more than it should be. Looking at the right side it appears the screen is warped down and is almost touching it the back. I am afraid this is a defect that needs to be exchanged or repaired. Any suggestions? I'll link to some photos. Chromebook defect album Anyone suggest if I ignore since I have 90 day warrenty or do I call up support right away?

Quaality,
I have sent you a Private Message (PM) regarding this matter. To view your PM's, please refer to "How to check your messages."
Regards,
eric-g
I no longer work for HP.

I intend to purchase a Mac Mini and connect to a regular (not smart) flat screen TV and use such as monitor. Can this setup also allow access to Netflix or Apple movies or an Apple TV is also required?

I intend to purchase a Mac Mini and connect to a regular (not Smart) flat screen TV that will be as such a large monitor. With this setup do I require an additional Apple TV to watch programs from Netflix, Apple Store movies, Y-tube etc?

You can view NetFlix and YouTube via their websites on a Mac computer. You can purchase/play iTunes movies and other thing via iTunes on the Mac.

Database table as datasource is not a "flat table"

Hi there,
im trying to transfer a user-created table from a sap-system into our sap-BW. I specified the table
as a datasource and everything seems to work fine.
But when i try to activate the generated datasource in the BW-system, it says it can't activate the datasource because its not a flat table.The datasource looks like [this|http://www.picstar.de/data/27-4-2009/bi.JPG], some of the fields of the original table containing strings we're ignored.
It works fine with other database tables though.
Any ideas?
thanks in advance,
dominik

Hi Dominik,
On which table did you create your dataSource ? Is is a transparent table (not a pool or a cluster table) ?
You can see this in the technical option of the table (SE11).
Regards,
FCI

HT4528 my i phone four will not re-set it keeps giving me error code 1611 any ideas

my i phone four will not re-set it keeps giving me error code 1611 any ideas?

Turned out that I had to delete the password first before I could change it.
That's the first time I ever had to do that.
In the past it would just accept the password that I entered when asked for it.
Now I will remember - i hope! :)

TS1389 All of the options above have failed. I purchased 14 Jimmy Buffett "Fin City" songs and four will not play. I get the same authorization message, but nothing works. Please help!

Purchased 14 Jimmy Buffett songs from "Fin City" and four will not play. All remedies suggested on Apple Support have failed.

If only some of the tracks from the album are throwing authorisation errors at you, that suggests that the tracks are damaged.
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the tracks and try redownloading fresh copies:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

15" Macbook Pro right front side does not sit flat on the table.

My 15" stock mbp's right front side doesn't sit on the table flat when the screen is lifted up. This is at the front corner of the optical drive. The bumper does not sit level. I have put it on the piece of glass just to make sure. It sits fine closed, but un-even when opened. Maybe the hinge is over torqued causing it to rise? I just got this from the apple store as a replacement for my first that had a bad screen 2 days ago. It's annoying for a 2000.00 dollar machine to have this issue. I took it back and they said it's in spec and that they will not let me do an exchange. Another one of their floor display MBP's had the same issue. The genius said he saw the issue but he would not to an exchange. There are two other apple stores in my area, is it worth a shot? This new second week of January build has a way better screen than the second week of December build. The coating on the screen is somewhat less and it has a better viewing angle. Other than the above issue, the laptop is fine. Is there any fix for this issue? I have read other people having the same problem. I frustrated because as a longtime apple supporter, I can't get get one out of the box that's right. Any help would be appreciated.
Chris

Thanks for the response. I went to the second Apple store and got the same response. It's a millimeter out off. He said that it was in spec. He said it's not perfect but it's not enough to get a replacement. So I may be over doing it here but I feel for a 2000.00 dollar machine, this should not be. It's small defect in the manufacturing process but it is one, none the less. Apple should take a zero manufacturing defect policy if a customer asks for a replacement machine. I think if it's not done right, than it should be fixed or replaced. Hey, I'll probably add some plastic to the foot that's off or I may open the thing up and bend it back to being perfect and fix this small defect but I think Apple should replace it. I have heard other having this problem and I have seen macbook pros in the store with this issue and they say it is within spec. I'll fix the issue that should have never left the factory myself. Anyway, I'll try adding more rubber to the foot.
Chris

Hierarchy: Postable node (or not) in Flat file

Hello Experts,
I have read several times, the links you provided on this subject and they were very helpful but I am still stuck here:
If I am loading a hierarchy through a flat file, how do I specify which of these nodes are postable and which are not?
I know the Leave notes are postable, but my issue is with the various interval nodes
For example, in this Customer profit center hierarchy ....
NodeID|InfoObject Name| Node Name----- |--Link-|-ParentID|Child-|----Next ID
0001----|0Hier_Node|--Customer--||---0|2---|--0---
0002----|-0Country--|-China||| -|----
0003----|-???--|50000||| -|----
0004----|-oRegion--|RegB||| -|----
0005----|-???--|60000||| -|----
0005----|-???--|70000||| -|----
What I want to achieve in the flat file, is to place region and the profit center 5000 under country, and make the profit center 5000 postable but Region is not postable.
Also, under Region is RegB which is supposed to be NOT postable, but it has 2 profit centers under it, 6000 and 7000 which should be postable.
Root
Country---5000
Region
RegB---6000 / 7000
Any help on this flat file will be appreciated. Where I have ???, I only meant I have doubts but I think it should be 0ProfitCtr.

Hi,
I don't know if this is what you mean...
NodeID|InfoObject Name| Node Name----- |--Link-|-ParentID|Child-|----Next ID
0001----|0Hier_Node|--Customer--||---0|2---|--0---
0002----|-0Country--|-China||---1| -|----
0003----|-???--|50000||-2| -|----
0004----|-oRegion--|RegB||--2| -|----
0005----|-???--|60000||4--| -|----
0005----|-???--|70000||--4| -|----
(hope it is readable)
In the hierarchy flat file you only need to specify the parent node of a row. That way your hierarchy will get linked. That is how we load our flat file hierarchies and it works perfectly.
Regards,
David.
Message was edited by: David Sirvent

Transformation not generating-Flat file loading

Hello guys, I hope you can help me with this little confusion I have on BI7 Flat file loading.
I got a File (CSV) on my workstation. I am trying to load Master Data. Here is the example of my file and issues:
Lets say, I have CSV file named "CarModel.CSV" on my PC.
This excel file has 10 Records and No atributes for this Field.
So the records should show like this and it is showing correctly in PSA level, DS level.
A
B
C
D
E
F
My goal is to load Flat file data to InfoObject (inserted in Infoprovider)
I created Source system, DS, all thats stuffs.
I am now on Display DS screen under Proposal Tab. I am putting 10 Records to show and hitting Load example data....it works fine by showing all 10 records. However in the bottom part of this screen, what should show as a Field ?In my case , First it was showing the First Record ("A")...i didnt think it was correct but i prceeded anyways. Transformation could not be generated.
I tried by deleting "1" from the field "No. of header rows to be ignored" and its the same result ..No transformations.. I mean i know its very simple to load this data but i am not sure what i am doing wrong..My question is:
1) What should show under Field/propasal tab in my case?am i supposed to create this Field?
2) Should the system to propse the field which is from my flat file header ?in my case i dont have any header..should i have include header in my csv file like "car model"? i am confused please give me some info thanks
dk

Hi,
In filed tab, u have to enter ur infoobject names in an order...and press enter it'll automatically give the description and its other factors...
i guess u shuld have some header in the sense eg: customer,cust ID like this..this only u have to enter as fields...in proposal tab...try that
rgds,

IPhone goes crazy when laying flat while charging

Hello,
I recently bought a iPhone 6 for the first time but ran into a small problem and was wondering if anyone else is experiencing something like this.
When I charge the iPhone through the lightning cable and put it flat on my bed, the iPhone literally freaks out and inputs random commands on the screen. When the screen is unlocked this results in random apps being opened, the screen swiped and random places pressed.
Strangely enough, this only happens when the lightning cable is plugged in.
I had a similar issue with a android device once so I'm wondering if anyone has an idea what's causing this.

I messed a bit around with the phone and figurd that it only happens when I charge the iPhone through a wall usb plug. Using the lightning cable on my mac does not cause these problems.
Since the iPhone's screen is capacitive, this could be a issue with static?

Step by step Data loading to BI 7.0 from SAP R/3 not from flat files

Dear Guru's
As i am new to BI 7.0, i need to extract the data from R/3 to BI. so could anyone help me in this regrds
Thanks
C.S.Ramesh

if ur still not clear
go thr this
Hi,
Check the following links.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
(navigate with expand left nodes)
also co-pa
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
LO Extraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Check these links:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Re: LO-Cockpit V1 and V2 update
Also Refer this link:
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
FI-CO 'Data Extraction -Line Item Level-FI-CO
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
FI-GL
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://www.sapgenie.com/sapfunc/fi.htm
FI-SL
http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
How to do basic LO extraction for SAP-R3-BW
1. Go to transaction code RSA3 and see if any data is available related to your DataSource. If data is there in RSA3 then go to transaction code LBWG (Delete Setup data) and delete the data by entering the application name.
2. Go to transaction SBIW --> Settings for Application Specific Datasource --> Logistics --> Managing extract structures --> Initialization --> Filling the Setup table --> Application specific setup of statistical data --> perform setup (relevant application)
3. In OLI*** (for example OLI7BW for Statistical setup for old documents : Orders) give the name of the run and execute. Now all the available records from R/3 will be loaded to setup tables.
4. Go to transaction RSA3 and check the data.
5. Go to transaction LBWE and make sure the update mode for the corresponding DataSource is serialized V3 update.
6. Go to BW system and create infopackage and under the update tab select the initialize delta process. And schedule the package. Now all the data available in the setup tables are now loaded into the data target.
7.Now for the delta records go to LBWE in R/3 and change the update mode for the corresponding DataSource to Direct/Queue delta. By doing this record will bypass SM13 and directly go to RSA7. Go to transaction code RSA7 there you can see green light # Once the new records are added immediately you can see the record in RSA7.
8.Go to BW system and create a new infopackage for delta loads. Double click on new infopackage. Under update tab you can see the delta update radio button.
9.Now you can go to your data target and see the delta record.
find your scenario and find what data sources do you need on R3 side and ensure they are active as well:
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
find your scenario -> data sources -> go to R3 -> sbiw and activate required data source
replicate data sources in BW:
RSA1 -> source systems -> right click on your source system -> replicate
then activate your BC:
service.sap.com/bi -> BI Business Content -> General Information -> SAP BW Business Content - Activation
and execute infopackage (it should be delivered with BC)
Useful links:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Pls chk this cookbook for step by step;
http://www.erpgenie.com/sapgenie/docs/MySAP%20BW%20Cookbook%20Vol%201.pdf
http://www.erpgenie.com/sapgenie/docs/MySAP%20BW%20Cookbook%20Vol%202.pdf
Step by step Generic extraction:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
How To doc link
https://www.sdn.sap.com/irj/sdn/howtoguides
Hope this helps

FTP Adapter not picking flat file

Hi,
I am trying to upload a simple flat file using FTP adapter
I have done all the configuraion setings & mapping program as well. But when i used the tcode SXMB_MONI for monitoring, it says "no message available".
Plz help.
Ragards,
Rajat

Hi,
Check these~
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp
Mark Helpful Answers
Hope this helps,
Regards,
Moorthy

I have created pages with WYSIWYG 6. Some of hyperlinks work well, some are not recognized (flat, not-hyperlinked text or picture). In IE everything works well. Thanks for advice.

Hyperlinks created in some pages work normally, in another pages of the same site, they are not recognized by Firefox. Re-publishing of the pages has no effect. Please, see http://www.kramaric.eu/psychoterapia.html (hyperlinked pictures).

The following line tells me that this is not a template file, but a document created from a template called index.dwt
<html xmlns="http://www.w3.org/1999/xhtml">
This means that you saved a child document as a template file at some stage.
If you go to Modify->Templates->Detach from Template, you can remove the template structure from your document. All you then need to do is to re-save the document as a template.

Macbook pro 2008 beeping noises when base of laptop is not on flat surfaces. Also typing randomly zero's, it think maybe something is loose. Anyone heard of this before?

I bought it refurbished a couple of years ago, been fine in genral. Last couple of months i noticed when different preasure is placed on the bottom of the laptop it is beeping very loudly until i find a flat enough position for it to sit on. Along with this it types zeros into anything i am writing.
Any one had problems likes this or think of a reason for please help me.

My first guess is your battery is swollen. Do you notice any distortion of the bottom part of the case?
2008 MBP has a battery that is user replaceable, so try running the MBP without the battery using the AC adapter.
If in fact a swelling battery is the culprit, the only real solution is to replace it.

Four feet not laying flat?

Similar Messages

Maybe you are looking for