Four pages of apps in iTunes, but only first two pages visible on iPhone!

If I connect my iPhone 4 to my notebook and launch iTunes, I can see four pages of apps on my phone - two pages, then a blank page, then a further two pages.
However, looking at the phone itself, only the first two pages are visible (and only two little dots at the bottom of the home page).
I can shuffle the apps around in iTunes without any difficulty, but when I press 'apply' the sync ends with everything back as it was in the first place.
iOS and iTunes both up-to-date, rebooting and soft reset doesn't fix.
Hope someone can help!
Thanks

We are having the same problem. Any updates?

Similar Messages

  • Multiple master pages, But only first master page is printed or is shown in pdf preview.

    Hi,
    I have 8 master pages in my adobe form, But when I see the PDF preview or print only the first master page is shown or printed. Can anyone please tell me how to print or pdf preview all the master pages. The contents in the master pages are different.
    Thanks in advance.

    Master pages are used a background for body pages (similar to a background image).
    You should put all your contents on separate body pages instead master pages.

  • Song downloaded from iTunes plays fine in iTunes, but only first 15 seconds will play on iPod then skips to next song?

    Songs that I download from iTunes play ok in iTunes. On iPod classic though, SOME (but not ALL) of these downloaded songs will only play for 15 seconds or so before it skips to the next song. It is random in that some songs off the same album will do this, but others not. Any ideas?

    Try this Hard Reset
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Test the sound again.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    If these songs are in MP3 format, google and download MP3 Validator and run through songs in the library.
    Good Luck!

  • C309a (Duplex Printing): the first two pages don't "duplex"

    Hi, I've got a little annoyance here: I love the duplex printing feature, but the first two pages don't "duplex!" The first page prints fine but doesn't get retracted back inside, and then the second page prints upside-down on a new sheet of paper.  The rest of the document "duplexes" as expected. Is there some option I'm (not) enabling?
    I'm running Windows XP SP3, wireless printing. Also for what it's worth, everything I've duplex-printed have been PDF files.
    Hopefully there's a solution and I don't have to continue leaving the first two pages of my documents blank
    Thanks in advance!

    If you have blank pages in your file you must set the print dialog through print booklet to print blank pages.

  • My iPod touch 4G 8GB, lets me download apps on iTunes, but when I go to my iPod, and then apps, the entire selection is grey and won't let me click my new apps to add to my iPod. What can I do?

    My iPod touch 4G 8GB, lets me download apps on iTunes, but when I go to my iPod, and then apps, the entire selection is grey and won't let me click my new apps to add to my iPod. Usually I just restore my ipod and re-download everything, but thats time consuming, and after I unplug my ipod from the cord connected to my computer, I can replug it right after and this will pop up again. I'm getting tired of doing this.
    Like I said, it will let me download the apps off iTune, just when I come to my apps page on my ipod, it won't let me add it to my iPod. I can't download it straight from my ipod either, but iTunes doesn't work on my ipod, and when I update my apps, when they're in waiting they never move. What can I do?

    I would say that you are not connected to the iTunes library you last synced with. You can only sync with one iTunes library. If you connect the iPod to another computer/another iTunes library then you get what you see.
    You can only manually manage music and videos among different libraries, not apps.

  • TS1702 RE: Boggler application by guru software -- I have tried everything suggested by Apple except updating OS because it requires too much GB. Paid for program, but it never downloaded.  It's not on my list of apps in iTunes, but I was charged for it.

    Purchased "Boggler" application by guru software, but it never downloaded.  How do I download it or get money back from Apple?  Tried removing free one and then downloading, but it wouldn't download anything but the free one.  Tried getting it from my list of purchased apps in iTunes, but it isn't there.  Got email receipt from iTunes, but no program.  Tried restarting iPod.  Nope.  Went to gurumobileapps.com, but the page is now blank.  Even the free program now crashes from time to time. Sometimes when I try it tells me it can't download it because there's no connection, but I don't have that problem with anything else.  Anybody else have Boggler and have problems with it?

    If an app is no longer in the App store you can't redownload it.
    You can contact iTunes and see if yo can get a download since you said you never fully download it.How to Get a Refund from the App Store

  • Hi I Havent Buy Any App From Itunes But They have Charge me  Rs 50 4 Times

    Hi I Havent Buy Any App From Itunes But They have Charge me  Rs 50 4 Times

    You've checked the purchase history on your account by logging into your account on your computer's iTunes via the Store > View Account menu option - that should include a Purchase History section with a 'see all' link to the right of it which you can click on to see a list of your purchases.
    If nothing shows there and you haven't added or changed your credit card details (when you do then a small temporary store holding charge may be applied to check that the details are correct and valid, which should disappear within a few days, though I believe that it's Rs 60, not 50) then you can contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I need to use up all my credits in ITunes but only have $.25. How do I do this as nothing is worth $.25? The reason I need to do this is to change my country for purchases on my Credit Card that is not a US credit card

    I need to use up all my credits in ITunes but only have $.25. How do I do this as nothing is worth $.25? The reason I need to do this is to change my country for purchases on my Credit Card that is not a US credit card

    Click here and ask the iTunes Store staff to zero your account balance.
    (114902)

  • TS3297 I comment the app on itunes but I can not complete the purchase of the app ask you just how I can do better

    I comment the app on itunes but I can not complete the purchase of the app ask you just how I can do better

    So you want to use the app in a different account than you bought it with. If that is the case you need to contact the Mac App Store support. You will find the link for that in the Mac App Store by clicking Featured - Under Quick Links you will see the Support link. Follow that for help.

  • I have a macbook pro with 250 GB of Space, 2.2 Processor, 16 GB of Memory 1600MHz, and Intel Iris Pro 1536. I backed up my apps using iTunes but I am having a hard time restoring my apps back to my iPhone 5s so could you please help me?

      I have a macbook pro with 250 GB of Space, 2.2 Processor, 16 GB of Memory 1600MHz, and Intel Iris Pro 1536. I backed up my apps using iTunes but I am having a hard time restoring my apps back to my iPhone 5s so could you please help me?

    So did you ever get your apps back on your iPhone?

  • When downloading a pdf, the print command show a document in the preview but only prints blank pages

    When downloading a pdf and using the print command, it shows  the correct document in the preview but only prints blank pages.  If I use the save command and try to open with Acrobat 11.0.07, it says it wasn't correctly decoded and can't open it.  If I do the same thing on my old Macbook (10.6.8) all works fine from the same website with the same document.  Any ideas?
    D

    This article maybe help to you, change pdf file type to other application like adobe reader, See:
    * https://support.mozilla.com/en-US/kb/Managing%20file%20types

  • I downloaded a book as a pdf in an app through iTunes, but I want to read it on my MacBook Air.  How do I do that, please?

    I downloaded a book as a pdf in an app through iTunes, but I want to read it on my MacBook Air.  How do I do that, please?

    A PDF is a PDF.  If it is an app then it isn't a PDF unless it is an app that is supposed to install the PDF somewhere in which case I wouldn't trust it.  From where did this originate? If it is some unknown web site there are plenty with fake links that say you are downloading one thing but they send you another in hope that you will blindly install some malware.  Usually they target Windows users but there's getting to be some for Mac (in particular MacKeeper).

  • When I run the cursor over a template it shows several pages but when i select the document it only brings up the first two pages to edit. How do I see them all?

    When I run the cursor over a template it shows several pages but when i select the document it only brings up the first two pages to edit. How do I see them all?

    Skimming the templates in the Template Chooser shows you all of the pages available in the template once you open it. You can insert the one(s) you want, even more than one of any of them. Most users don't want or need all of the different pages, especially when they start the document.

  • AppleTV syncs with iTunes, but only two tabs - summary+i photos

    The problem started when my hardrive on my iMac stopped working. My apple TV was working fine and I continued to buy some movies while my iMac was being fixed. I had my iMac hardrive replaced and I had a backup of my itunes music folder.
    Now when I tried to re-sync apple tv with my iMac, i typed in the 5 digit code fine and apple TV pops up in the device list. but when I click on the device in itunes, I only see two tabs for the device. Summary - which is mostly blank, and Photos - which allows me to select the folders I want to include. What happened to all the other options, TV, Movies, Podcasts etc. How can I get it all back?
    Thanks for any suggestions.
    Tony

    Sounds like you are set up for streaming only, See This
    Settings/computers, select 'connect to itunes.....' (not shared library), you may need to unlink your current set up first.

  • How do i get my podcasts out of the cloud and into my ipod? I currently have about 30 podcasts on itunes  but only about 5 in my ipod.

    how do i get my podcasts out of the cloud and into my ipod? I currently have about 30 podcasts on itunes  but only about 5 in my ipod. The ones listed as being in the clould will play on itunes but I cant get them into my ipod.

    Either sync them via iTunes on the computer to the device or turn on Podcast syncing in Settings > Podcasts on the device.
    This is covered in the User's Guide, try reading it for a better understanding of how the device works.

Maybe you are looking for

  • R835-P56x motherboard Part number

    Toshiba R835-P56X Part number PT324U-008003 I need a motherboard but there is no part number on original motherboard. would anyone know the part number or know where i can go to find out what it is? Its a I5 systemboard Thank you Solved! Go to Soluti

  • Problem with XML inside a class

    OK. This is a setter function in one of my classes. It's supposed to load an xml document into an array when i call it with the address of the xml document. When I debug i see the array but there's no data in it. I'm pretty sure i'm doing something j

  • Installation halts - probably because of sapdb.inf

    Hello fellow SAP admins I'm trying to install SAP solution manager/netweaver 7.0 on a Sun Sparc T2000 with Solaris 10. The installation works fine until I get to phase 13 of 47: "Create database schema". I don't get an error message, but the installa

  • Cannot drop a tablespace

    Hi, A datafile of my database has been deleted from the OS and cannot be recovered. The related tablespace exits in the database. I want to drop this tablespace, but oracle does not allow me to do so. I dont have the backup of the datafile. Can somet

  • I have two HP printers connect but can only see one in the "soution center"

    How do I get  solution Center to recognize both printers. I'm having trouble with print cartridges in my 2170, but when I try to use solution center it only show my 6500. Any suggestions would be appreciated.