Four-pin Firewire into a G4/G5?

(Possibly) dumb question:
I borrowed an older video camera from somebody with a 4-pin firewire connection to a "PC". Its a Canon ZR25MC.
Is there a cable or adapter that will allow me to upload mini-DV movies into iMovie via either Firewire 400 or 800?

Hi Richard;
When I am uploading movies from camcorders I use a 4pin to 6 pin Firewire cable. The 4 pin connector with fit the camcorder and the 6 pin end with fit into the Mac.
Allan

Similar Messages

IEEE 1394 six pin to four pin firewire adapter

Does anyone know where I can find an adapter to go from IEEE 1394 six pin (ipod cable) to IEEE 1394 four pin (on my laptop)? It's mentioned in my U2 owners manual, but I can't find one. Thanks.
Oops... wrong catagory-sorry-I put this question under Ipon connecting to Windows.
Message was edited by: i4st8

here is a variety:
http://fwdepot.com/thestore/default.php/cPath/2_29

What cable do I need to hook a 4 pin firewire cable into an iMac (21in late 2013)

What cable do I need to hook a 4 pin firewire cable into the back of an iMac (21in late 2013)?

One of these:
Thunderbolt to Firewire Adapter
http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r

4-Pin to 6-Pin Firewire cable into new iMacs?

Hi,
I have the new 27inch model iMac and as we know they have no firewire ports. I've got a Firewire to Thunderbolt adapter for my two external Firewire 800 hard drives.
Question is I have my old Mini DV camcorder that I used to plug in with a 4-Pin to 6-Pin Firewire cable. How do I go about gettinbg this camcorder hooked up to the new iMac?
Thhis was the cable I used to use:
Thank you for any assistance.

Here checkout these Thunderbolt to Firewire adapters.
http://store.apple.com/us/browse/home/shop_mac/mac_accessories/cables
and these...
thunderbolt to firewire

Canon GL2 and Belkin 800/400 9-pin to 4-pin firewire cable not working!!!

I have my Canon GL2 connected to my I-Mac OSX version10.7.3 with a Belkin 800/400 9-pin to 4-pin firewire cable and the computer is not acknowledging the camera or firewire cable. Trying to get footage into Final Cut Pro 10 off mini dv tape.

Please use:
http://help.apple.com/finalcutpro/cameras/en/index.html?
to see if your GL2 is supported. Also you probably should also post int eh Final Cut Pro forums.

How to get iMovie version 9.09/2009 Mac version 10.7.5 to recognize JVC GR-DX77U camcorder via 9 pin to 4 pin firewire and import video

My question: Is it possible to get iMovie version 9.09/2009 MacBook Pro/ Mac Os X version 10.7.5 to recognize JVC GR-DX77U camcorder via 9 pin to 4 pin firewire and import video?
My camcorder is recognized with 4 pin to 4 pin firewire on laptop with Windows operating system; however, it will not recognize on MacBook Pro with 9pin to 4 pin firewire. JVC website does not offer any updated camcorder driver software for this camcorder and older version driver on CD will not download onto MacBook Pro.

Hi
With the reservation of that I us:
• iMovie 9.0.4
• Mac OS X.6.9
see my notes
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited. No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Firewire800 to 6 pin Firewire

Hi there,
I have a MacBook Pro mid 2007 with a Firewire800 port I have never used and I want to hook it up to a video switcher at my school which has a 6 pin Firewire cable. (I want to send video OUT from the Mac to the switcher, just by playing movies via iTunes or Quicktime). My question is - is the Firewire800 port a video OUT or video IN? I just don't want to waste $35 on a cable http://www.belkin.com/au/p/P-F3N404-APL/ that I might not be able to use.
Thanks -

Hi Scott,
Just some thoughts:
I don't know the answer to your question, but this thread would seem to say yes: https://discussions.apple.com/thread/3754292
FW will export data to peripherals (HDs etc.) and import it (from FW camcorders, HDs etc.) making it a two way data street. I suspect, as the above thread gets into, it depends on software in combination with hardware.
FWIW

Got a fan with a three pin conecter instead of a four pin conecter

So I bought a fan for my HP Pavilion g6 and you know the little plug on the end of the fan wire, well it had a three pin instead of the four pin plug that the original fan had. And I made sure it was the right computer when we orderd the fan. I was wondering if theres a way to maby snip the wires and splice it into the old plug and then just join one of the wires together or somthing, becuase at the moment its running at full blast becuase it dosent have the controll wire to tell it what speed to run at. Please help!
This question was solved.
View Solution.

Hi,
The part store says you need part # 641024-001:
     http://partsurfer.hp.com/Search.aspx?SearchText=A6Z72UA
which is for the following machines:
    http://partsurfer.hp.com/Search.aspx?SearchText=641024-001
You can see it has 4 cables: red, white, blue and dark yellow as shown:
   http://www.ebay.com.au/itm/NEW-HP-641024-001-Laptop-fan-for-HP-Pavilion-G6-1D26DX-G6-1000-/181173886...
Which part did you order ? Definitely it's not the right one.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

FCP can't detect a new IEEE 1394 4 to 9 pin Firewire

Hello folks,
I am using a Mac Pro which has both 4 to 6 and 4 to 9 pin Firewire terminals. My old 4 to 6 pin cable broke, so I have bought the new Firewire 4 to 9 pins. The camera end is exactly the same, only computer end differs. But when I try to capture the footage, FCP gives me the warning that Capturing device cannot be detected. In fact, Mac can't even detect the camcorder when I wanna use it for Skype. So I am wondering if I need to change some Capture settings, or what the problem might be?
Thanks for any input,
Cheers

Hello,
thanks for your response. I did find out the problem. The problem is actually in camcorder's fire wire terminal. I went to Apple store, tried it on numerous computers, non of them detected it.
Thanks again
Cheers

I have my Canon GL2 connected to my I-Mac OSX version10.7.3 with a Belkin 800/400 9-pin to 4-pin firewire cable not working!!

I have my Canon GL2 connected to my I-Mac OSX version10.7.3 with a Belkin 800/400 9-pin to 4-pin firewire cable and the computer is not acknowledging the camera.

While holding the option key, click the  in the menu bar and select System Information. Select Firewire in the Hardware section and see if your camera shows up as a connected Firewire device. If not, then you have one of three basic problems:
     1. Defective Firewire cable
     2. Defective Firewire port on computer
     3. Defective Firewire port on camcorder
Rule out any of the above by trying a different cable, Firewire device (like a hard drive) or try your camcorder/cable on a different/friend's computer.
If you suspect a Firewire port problem on your computer, you can try resetting it by shutting down and disconnecting the power cable to the computer. Wait for 30 minutes and plug back in and startup. You can also try resetting Parameter RAM (PRAM) on the iMac. (Apple's Instructions for reseting PRAM)

HT3231 transfer files to my new iMac system 10.8.3, 9 pin firewire. Apple sold me FireWire 9-6 with a Thunderbolt to FireWire Adapter. This will not work, do i need a different cable?

I have a G4 with system 10.4.11 and a 6 pin firewire trying to transfer files to my new iMac system 10.8.3, 9 pin firewire. Apple sold me FireWire 9-6 with a Thunderbolt to FireWire Adapter. This will not work, do i need a different cable?

Apple Thunderbolt to FireWire Adapter
Then it sounds like the FW800 to 400 adapter just gets in the way. You don't have FW800 case? on my MDD G4 I added and used FW800 controller and cases from OWC and Sonnet.
http://www.macsales.com/firewire

Does a 9-Pin to 6-Pin FireWire Cable carry power to the device?

I have a VHS to Digital Converter ADVC 55 which has a 6 pin Firewire out which takes its power from the 6 pin firewire on the computer.
If I buy one of these : Belkin 9-Pin to 6-Pin FireWire Cable
Would this carry the the power to the device from my Mac Pro ?

Would this carry the the power to the device from my Mac Pro ?
Yes.
(46000)

How do i enter a sony tv wireless pin code into airport extreme?

How do I enter a sony tv wireless PIN code into airport extrme / time capsule?

If you have upgraded to Lion 10.7.3, you will need to download and install AirPort Utility 5.6 for Mac OS X Lion
If you are still using Leopard or Snow Leopard, you can use the version of AirPort Utility that is already installed on your Mac
Open Macintosh HD > Applications > Utilities > AirPort Utility
Select the AirPort Extreme
Click Manual Setup
Shift the focus of your eyes away from the window in the center portion of the screen and move the focus all the way up to the very top of the screen where the Help, Window, Settings menus are located
Click on the Base Station menu
Click Add Wireless Clients and proceed

3 pin firewire cable converter

Hello
I am looking for a way to convert my 3 pin firewire isight cable. I bought the camera in 08 and want to use it now but i need
a way to convert it to use it with my dell. Can anyone help please?

Firewire adapters come in all shapes and sizes. Amazon is a good place to look at possibilities based on the two ends you have to connect - I suspect you need something like this example (standard disclaimer applies: I'm not advocating you purchase from Amazon specifically):
http://ecx.images-amazon.com/images/I/71xB21cPMxL._SL1500_.jpg
But once you have it electrically connected to your Dell, you may or may not have the software (and OS) capability to drive it... that will depend on the app you want to use it with.

IPod Hifi optical cable pin broke into outlet

I used an optical cable with a plastic adapter to connect to iPod HiFi. While moving the box the pin broke into the outlet. I tried hard using a fine gripper but no chance. Any ideas how to get it out to be able to connect a new cable ?
I think this is poor design of Apple HiFi as optical cables are often made of plastic that can not handle the forces. Other devices like Apple TV (HiFi was connected with it) use less mechanically sensitive (square) optical outlet.
iPod HiFi Apple TV Mac OS X (10.4.9)

The HiFi is designed to use 3.5mm connectors (which is what broke off in yours) and can be used with Toslink cables with an adapter, primarily for connecting to an Airport Express or a computer. The type of connector you are referring to would not work in the above situation. In my opinion it is overkill to use the Toslink cables anyway unless all your music is in AIFF. 128 AAC doesn't need it.
I'd look for any local stereo repair place and take it to them. I'm sure they have lots of experience removing broken connectors.
Incidentally, it is a user error to move an audio device with a fragile adapter connected to it.

Four-pin Firewire into a G4/G5?

Similar Messages

Maybe you are looking for