Four system transport domain configuration

Hi,
Currently we have three system landscape DEV>QA>Prod
Now we are introducing one more environment (Training) .That means when you release the request from QA then it has to be populate to Production and Training environment.
Now my question is how to configure STMS for 4 system landscape?
Please suggest if you have done this scenario.
- Kristene

Hi Bernard,
I thought of moving it to another forum (NW Admin), but then I discovered it was there already... (cross-posted)... together with 154 other "unresolved" questions
The question of the transport domain, group, controller, etc design (in general) does have security related aspects, so I will leave it open.
Cheers,
Julius
@ Kristene, please follow up on your questions... and close them if answered...

Similar Messages

  • Four systems transport landscape

    Hi,
    We have introduced pre-production environment.Now we  need to configure 4 system transports.
    How to configure 4 system transport landscape.
    - Kristene

    Hello,
    You need two do 2 things:
    1. Include the system into your existing transport domain.
    2. Re-configure the transport routes
    To include the system into your existing transport domain check the following link:
    http://help.sap.com/saphelp_47x200/helpdata/en/44/b4a0c17acc11d1899e0000e829fbbd/frameset.htm
    To re-configure the transport routes:
    You simply need to login into the 000 client of your domain controller and re-configure your transport routes.
    as described in the link given below:
    http://help.sap.com/saphelp_47x200/helpdata/en/44/b4a1df7acc11d1899e0000e829fbbd/frameset.htm
    Once you have re-configured the transport routes, do not forget to distribute the configuration.
    Regards,
    Siddhesh

  • Transport domain configuration error

    Hi,
    We have made a homogeneous system copy of our R/3 production system to create a test system.
    The copy has the same SID as the source system and is installed as a local system rather than a domain - this is a Windows environment. The source system is the domain controller for the transport domain.
    I have run SE06 in the copied system and am now trying to reconfigure STMS to set it up as a single system in it's own domain.
    However, when I go into t/action STMS I am prompted to join the production domain - which I didn't expect, so I select Other configuration and enter appropriate values there but am getting error:-
    Local TMS configuration is inconsistent in N3P
    Message number XT 123
    Can anybody advise how to resolve this?
    Regards
    Richard

    1. Did you follow changing SID name and post database copy steps at database level first?
    2. If you have done above, I hope you have deleted existing Transport configuration from SE06. If you haven't pls do.
    3. Then,  At transport domain controller, please remove this system ( if this system existed earlier)
    4. Now, try joining domain.
    It should work!
    K

  • Re: Transport Domain configuration

    Hi friends,
             Is it possible to add system in more than one transport domain? If possible how to add that?
    Any help would be highly appreciated?
    Thanks,
    krishna

    Hi Krishna,
       As far as I understand SAP supports multiple transport groups not transport domain. For one system landscape there should be only one transport domain But then I am no Basis Administrator.
    Regards,
    Sanjeev

  • CTS+ what is a best option for transport domain?

    Hello Experts,
    What is a best option to confugure CTS+ regarding the transport domains?
    Should it be simpe and single transport domain at SOLMAN system and all satellite systems assigned to this single transport domain OR should I keep existing transport domains for satellite systems and connect them via domain link with SOLMAN?
    Any  ideas please?
    Thanks!

    hI,
    Normally if you have non abap system in your landscape then you can have solman domain as both communication system and Transport domain, then maintain the TMS domain configuration in solman itself
    If you want to maintain ABAP separated system as communication system then this case you have to create the domain link between communication system transport domain and the solamn domain
    Chk this CHARM Configuration Problem
    Thanks,
    jansi

  • Include a system in two different Transport Domain Controller

    Hi folks,
    I s it possible to configure a system in two different transport Domain Controller?
    The two domain controllers will be in the same /usr/sap/trans file system.
    thanks,
    Má

    Hello Má
    Firstly to include system in the transport domain you need to have systems sharing common transport directory. Which you confirmed is the case.
    Now when you try to change the Transport Domain of the system to make it part of another system it will overwrite current configuration.
    Hence you wont be able to make one system part of two Domains.
    There is no workaround available best of my infomation.
    Regards
    DG

  • Automatic Transport Mechanism to four systems in same landscape

    Hi,
    We have come across a requirement where we need to transport a request to four systems instead of traditional three.
    The systems involved are - DEV (Development), QAS (Quality), PRD (Production) and TRG Training).
    Currently the transport route is setup for three systems and we need to add the fourth one - Training system. The solution we are looking for is once the request is imported in Production it should be imported automatically in Training system, without any manual intervention.
    The version being used in ERP 5.0.
    Any input in this reagrd is much appreciated.
    Regards,
    Rajeev

    Hi,
    You can configure the transport route accordingly
    Then Click on the system where you want to schedule the auto import job (Training System ). Once you are in the import queue of that system (Tranining ), click on import all request (Big truck). After choose option - at start time and give a period say from today 7 AM and then choose the period option like (every 15 mins) and save this. It will release a periodic job running every 15 mins in your system with the name TMS_00000000XXTMS_TP_IMPORT.

  • How to include virtual system in transport domain

    Hi all,
    I have my development and quality servers running on one instance.at the time of configuring STMS,i have made the transport domain and included both the systems.Also i have configured production system as the virtual system.Now i have installed the production system on a different host with a different transport directory and want to include this system in the transort domain.in a way the virtual system will be replaced.
    How should i do it.
    Regards
    Praveen

    Hi Praveen,
    If you want to include a system in your existing transport domain, just login into the system, in T-code STMS you will get a POP UP choose other configuration ,it will ask for-:
    System
    Description
    Target Host
    System Number
    Save the settings and wait for some time it will automatically added in your Transport Domain.
    Reward Points if find it useful.
    Thanks,
    Prashant.

  • Not able to include the system to its transport domain

    Hello,
    We are not able to include the system to its transport domain. We are getting the same error:
    Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
    Except.                CX_SY_OPEN_SQL_DB
    Date and Time          01.10.2010 11:27:35
    Please advice
    Sankar

    Hi Shyam,
    This is actually a program error and the same can be rectified by implementing the [SAP NOTE 1412609 - DUPREQ when configuring the transport domain|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1412609] using the tcode SNOTE.
    This will resolve ur issue.
    Regards,
    Varadharajan M

  • Error checking transport group configuration in System BQS

    Hi Everyone,
    I made a client export from Production to Quality. It went successfully,, I noted the requests numbers and transported them from PRD to Quality, but while transporting there was a tp error(which i did not note), next i went to the quality import queue and saw all the 3 requests had come. But when i click the adjust queue icon im getting the following error message "Error checking transport group configuration in System BQS" .  Afterwards i tried to delete the requests from quality to retransport  from production but still im not able to delete those requests from quality. Can anyone help me solve this.
    Regards,
    Rahul

    Hello Rahul,
    regarding the error message:
    "Error checking transport group configuration in system"
    It's mostly related to the TMSADM RFC destination. Kindly follow the below mention steps:
    1. Logon to client 000 with user DDIC.
    2. STMS   > System   > Overview   > Select the system in which you are logged in   > Click on the menu says EXTRAS   > Generate RFC Destinations
    Perform the above steps in all the systems configure in your TMS. This should resolve the issue.
    Best regards,
    Tomas Black

  • Adding a new system to the transport domain

    Gurus ,
       currently our landscape is a 3 system landscape . We are SAP BUSINESS SUITE users  . we are using ECC 6.0 on AIX with AS ABAP .
       we are planning for one sand box system on AIX with both AS ABAP and AS JAVA . but we  have certain confusions and lack of clarity on certain portions . hope over which you all can throw light ,
       - Will there be any difference in license info for using ECC with AS ABAP (or) ECC with AS ABAP + JAVA .
      -  would be able to add this system to our transport domain without including the system in solution manager
    - can we make clinet copies from a ECC system with ABAP alone to a ECC system with ABAP +JAVA
    - How to get more clarity on the license perspective of adding this system 
    please guide us

    1. Will there be any difference in license info for using ECC with AS ABAP (or) ECC with AS ABAP + JAVA .
    According to me there is not any differences in license, when you apply for the license you have to select the system as ABAP+JAVA and i dont think that you need to install any license for java in ECC
    2. would be able to add this system to our transport domain without including the system in solution manager
    Yes if Solution manager is not your domain controller. You can add the system into your domain, For the transport between 2 system is the requriement is that both system should be same relase with Same ABAP support pack and Kernel (as per my understnading).
    3. can we make clinet copies from a ECC system with ABAP alone to a ECC system with ABAP +JAVA
    This is think might not be possible but not sure for this, becuase there must be some ddic difference in both system.
    Please correct me if i am wrong.
    Regards,
    Subhash

  • Systems in same transport domain, but PRD import queue is empty

    Hi all!
    I have previously set up ERP 2005 development and QAS system, and there has been some development and transporting occuring between these two systems. Now I have installed the production system and added it to the transport landscape in STMS. The three system are in the same transport domain and the same transport group. In STMS I have created the Delivery route to the PRD system.
    When I check the import queue for the production system, only transports created AFTER the installation of the production system appear in the import queue. Transports created and released from DEV to QAS before the production system was available is not displayed in the queue.I know that I can add single requests to the import queue easily, but that required a lot of manual work and making sure that the transports are added to the queue in the correct sequence.
    How can I get all the transports to appear in the PRD system import queue? In AL11 in PRD, I am able to access the TRANS_DIR and I see all the transport requests in the directory.
    Regards,
    Thomas

    Hi Thomas,
    "Only transports created AFTER the installation of the production system appear in the import queue." - <b>This is expected</b>
    From table E070, you can get a list of all transport imported into QAS system. Sort that list according to the date imported, and save the transport requests into a text file.
    Run this below script from production by logging in as <sid>adm.
    Provide the transport text file as an input to the script. It will add the transports to queue automatically one by one.
    @echo on
    set SID=<Prd SID>
    set CL=<Client>
    set filename=<drive>:\usr\sap\trans\scripts\transports.txt
    FOR /F "tokens=1,2* delims=K" %%i in (%filename%) do (
    tp addtobuffer %%iK%%j %SID% client%CL% pf=<drive>:\usr\sap\trans\bin\TP_DOMAIN_%%i.PFL >> )
    Before running the script, take a backup of the production buffer at the OS level, incase u need to restore it.
    Cheers,
    Fahad

  • How Do I Move Production from one Transport Domain to another

    Hi,
    We are prepping for our upgrade from R/3 4.7 to ERP 6.  I have created new Dev and QAS systems in a new transport domain for the upgrade.  A new transport Domain was created for the upgrade landscape, and a placeholder "virtual" system was created for production in this domain.
    Now, before I start the upgrade, I would like to change the transport domain of our production system to be included in the new TP Domain.
    Thanks for any suggestions!
    Tom

    I have figured this out.  I changed the profile parameters to point to the new server and bounced the instance.
    I also changed the TP Domain in the Solution Manager to the new domain.
    I logged in to the old domain controller, and deleted the production system from the System Overview, and propogated the configuration.  This essentially removed the production system from the landscape.
    I then logged on to the production system in client 000 and when I brought up STMS it automatcially suggested the new transport domain.  I accepted this and the system was added pending approval.
    After logging in to the new domain controller, client 000, I approved the system and it replaced the previously virtual system with the actual production system.
    I hope this helps others in the future.
    Tom

  • Password issue in Transport Domain

    Hi
    We was getting some problem while releasing the transport request in ERD (SAP Dev server). We was getting error 12. I tried different option but did not worked and then we decided to re-configure the Transport domain (deleted old trasnport route using SE06 and then re-created transport domain using STMS). Now, ERD is the domain controller and ERQ (QA server) and ERP (Producation server) is the part of domain controller. I created one test transport request in ERD and moved to ERQ.
    Everything work fine but have one issue. When i was creating the domain controller using my user ID in client 000 (with sap_all authorization), it asked me couple of times password for productive client and client 000. When i was adding ERQ and ERD, it again asked for my passwords (2 to 3 times for each system). I'm not able to understand it.
    I created transport request in ERD and release it. When i was trying to move the same transport to ERQ server (i logged on ERQ server to transport request), it again asked password for ERD, ERQ and ERD servers.
    Looking forward the solution of this problem.Not sure, if i need to set some profile parameter to avoid to enter pasword or something else.
    Pls suggest to solve this problem.
    Thanks
    Amar

    Thanks Siva for quick reply.
    I checked the connection as you mentioned. Connection test is ok but Auth test  failed:
    'Connection Test TMSADM at ERQ.DOMAIN_ERD '
    Password logon no longer possible.
    Same error for all three system. I think, something worng with the 'TMSADM'.
    As mentioned earlier, there was some issue in transport domain. To solve the problem, we deleted all RFC for TMS* in SM59 of ERD/ERQ/ERP server. Deleted transport route using SE06 and re-cretaed Domain controller and then added the ERQ/ERP in domain controller. ERD is the domain controller.
    I had not deleted user TMSADM in client 000 before re-configuring the transport domain. Not sure, if i should delete user TMSADM in all three servers  and re-create the domain contoller. Any suggestion on this?
    Problem seem to be for the password of TMSADM user ID. Checking more in details.
    Thanks
    Amarjit

  • Transport Domain Controller delete

    Hello,
    I have created a new BI dev system and need to set up the transport connectionns.
    I have deleted the TMS for the old BI dev and now try to set it up for the new BI dev.. I assume i first have to delete the setting that the old system is the Transport Domain Controller. How do I do this?
    Thanks,
    F C

    Hi F C,
    you can delete the TMS configuration
    goto>STMS(T-code)>system overview>Extras>Delete TMS Configuration
    regards,
    kanthi

Maybe you are looking for