Fout (-15006)

I have a -15006 error code on my Apple TV 2.
What kind of error is this en how do i resolved this error???

maes39 wrote:
I have a -15006 error code
try this:
jonjon5 wrote:
I had the same problem. Looks like Apple have changed to IPv6 addressing with iTunes 10.4 for Airplay devices. I run Apple Airport Extreme as my main WiFi router abd then Bridge off that with Apples Airport Express and also have an Apple TV.
I changed the setting for my Apple Airport Extreme to "Host" Mode under IPv6 tab in Airport Utility.
All seems to work for now.

Similar Messages

I get error (-15006) when I try to connect air play true Apple TV. No problem with my old PC.mit with my Mac i get that error.

Hi, I get error (-15006) when I try to connect air play true Apple TV. No problem with my old PC. with my Mac i get that error.
It is true the Ithunes I get the problem.
What can I do to fix this.
I also have problem some times to conect to my Ipad to Apple tv. Some time I have to restart my Ipad to get conection to Apple t. whay is that ?
can some one help me ?

Hi whitwick,
If you are having issues with your network connection when attempting to use AirPlay, you may want to use the steps in this article to troubleshoot -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Thanks for using Apple Support Communities.
Best,
Brett L

My itunes on my imac cannot stream my music by my airport express. It says unknown error (-15006). My ipad it is no problem.

My itunes on my imac cannot stream my music by my airport express. It says unknown error (-15006). With my ipad it is no problem.
My imac has been working before.

Hello JBrans!
Did you get help for this problem. Today I got the same problem. Now I don´t know what I can do anything. I did reset AirPort Express. New konfiguration. Nothing. Thank for help!
Kind regards
Falk H.

Airport Express error (-15006) when trying to connect as a remote speaker?

I use an Airport Express (g) to port music to my stereo.
Recently it stopped working and although the green light is on (ie connected) when I try and connect iTunes to it gives me the waiting bar and then error (-15006).
I've tried doing a 'hard' reset on the unit and reconfiguring it but no change.
Is it broken or is this a software/setup issue?
Thanks,
Dan.

After reading dozens of reports about this issue in this forum I found my solution and I want to thank everybody for their contribution. Here is what I did. I think this can help many of you that are having your airport not recognized by airport utility:
1- connect your aiport express to your computer with an ethernet cable
2- while mantaining your aiport express connected to your computer by this cable do a factory reset (see apple support to learn how to do this simple procedure)
3- at this time you will see a steady ambar light in your airport express
4- launch airport utility and wait 30-50 seconds
5- airport express should now appear with factory settings ready to be setup
If you have an Airport Extreme base station and want your airport express joining your network follow the above procedure and TURN ON airport in your Mac in order you can access your airport express through airport utility.
I hope this help you. My airport express (n) is working again with firmware 7.4.1 that many people claim to have a bug as is air tunes. My house is a 2 story building and this airport is on the top floor where te network could be problematic but it is not.
Regards,
Jose

HP Officejet Pro 8500A Plus e-All-in-One Printer - A910g cm756a geeft fout melding

komt fout melding (pompmotor afgeslagen druk op ok ) ok druken helpt niet alstub. help me

Hello,
I see that you're having an issue with the pump motor stall. I would suggest doing a hard reset.
You can also follow this document for the issue you're having.
Also, can you access the main menu (copy,scan and fax) on the printer?
Hard Reset:
Unplug the power cord from the printer and wall
Take out the toner/cartridges
Wait 30 sec
Plug the power cord back into the printer and wall (Make sure the printer is plugged into the wall and not a surge protector)
Insert the toner/cartridges back into the printer

I keep getting this message An unknown error (-15006) occurred while connecting to the AirPlay device " AirPort Express".

Please help. I have been having major difficulties with my Airport Express. It used to work fine but for the last year or so it continually disconnects, skips and ultimately drops out and itunes gives me this message "An unknown error (-15006) occurred while connecting to the AirPlay device “AirPort Express”. I keep resetting, unplugging, restarting Itunes, or my computer. It works for a couple of hours and then I get the message again. It's making me nuts and was a bummer at last week's party when we had no music, yet again. I have looked up the support discussions, but there is no answer as to how I can fix it. I am currently using Mt Lion OS. Does this have anything to do with it? Checked for software updates, but nada.
Any suggestions.

It may be possible the where you have the AX located may just be in a spot where it does not get a good signal even it is only 8 feet away.
I suggest that you download and install iStumbler. You will use it to determine the signal quality by making Signal-to-Noise Ratio (SNR) measurements. This will be easiest if your Mac is a laptop ... or you can borrow one. When taking the measurements, you only want your "main" AirPort running as this is what we want to measure at the location of the AX.
SNR (in dB) = Signal (in dBm) - Noise (in dBm)
You can easily find the Signal and Noise value using System Profiler on your Mac laptop.
ref: Click on the Apple icon on the menu bar > About This Mac > More Info... > Contents > Network > AirPort > Interfaces > en1 > Current Network Information > Find your wireless network > Signal / Noise
While your still in the System Profiler, note the value for Transmit Rate.
These values should be negative numbers. For example, mine currently read: -67 dBm / -95 dBm, with a transmit rate of 27 (Mbps). Plugging in these numbers yield: SNR = -67 - (-95) = 28. My Mac Mini is about four rooms away from my AEBS with about five walls between them. As you can see, the signal is still quite useable ... but the bandwidth is minimal, especially for streaming.
SNR Guideline
40dB+ SNR = Excellent signal
25dB to 40dB SNR = Very good signal
15dB to 25dB SNR = Low signal
10dB to 15dB SNR = Very low signal
5dB to 10dB SNR = No signal
Please post back your results.

Mail For Exchange Error -15006

10 days ago we updated our microsoft exchange server 2003 to exchange 2007 sp2. All went fine. Almost all 300 cellphones synchronised over the internet without any problem except for two phones. One Nokia E61 and one Nokia E51. From blank i can only synchronise once. When i start synchronising for a second time i get the message "Error in exchange server" (translated)
I upgraded to the latest firmware and the latest mail for exchange version without solving the problem. Changing the account on the phone also did not solve the problem. So the conclusion is that the problem is not in the account.
In the adminlog of the nokia suite, which i installed to troubleshoot the problem, there is a Mail For Exchange Error -15006.
Anyone have an idea?
Thanks in advance.
Willem Kraaijenhof

It could be a servicepack issue. Read this:
http://europe.nokia.com/find-products/nokia-for-business/software/email-and-instant-messaging/mail-f...
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Using "\n" with fout()

Hi everyone,
I am reading from database and writing to a file. I am using fout();
I can't seem to use "\n" (new line);
Is there any way to create a new line using fout();
I dont want to use a bout();
Thank you.

what's fout and bout? Are those instance variables in code (FileInputStream or BufferedOutputStream maybe?)? I've never seen either of those methods (or APIs- what ever you're talkinga about).

Airport Express and Airtunes no longer work error -15006

This is killing me, I feel at my wits end.
I have an airport express that has been in use for two years. I use it only for airtunes from itunes through my wireless network.
I have an apple TV that I added 2 months ago and use occasionally for airtunes, but mostly for all the fine things that apple TV does.
About a week ago, sometime after upgrading to Snow Leopard and before iTunes 9 I have completely lost airtunes connectivity. At first it was just the airport express, but today it is also the apple TV.
When I choose either speaker (apple TV or Airport) from iTunes it just tries to connect forEVER. Sometimes I get the error -15006.
What I have:
24" iMac running snow leopard (wireless)
13" Macbook Pro snow leopard (wireless)
Cisco Router WRT110
Airport Express version 6.3 (wireless)
AppleTV latest software (wireless)
What I have done:
Reset and reloaded the Airport Express a dozen times. It worked for a minute after I changed the settings to require a password, but quickly went back to the same symptoms.
The airport shows up fine in Airport Utility, but will not work for airtunes.
The Apple TV shows up in iTunes and syncs properly, but will not respond to Airtunes. I have checked airtunes settings in the AppleTV and it is on. I even tried turning it off to see if it would improve the airport to no avail.
Please help

Any advice out there? I've even taken bypassed my main Extreme base to plug the ethernet connection directly into the Mac desktop to do software updates that might have been missed by going through the Extreme and wifi. While it did install one security update, it didn't affect the Express units.
I'm wondering about firmware. I have checked over and over for software updates, and my system assures me that everything is up to date. However, I'm concerned that somehow I'm missing a firmware update. My Airport Utility tells me my Extreme is running on Version 5.7, and on the few times one of the Express units shows up, it shows as running Version 6.#.
Do I need to manually install a firmware update, and if so, how? I terrified that I will mess up the ONE wifi unit that is functioning.
Ironically, my Extreme base is the oldest in my batch-both of the Express units are newer than it.

I can not uninstall the newest Muse, the error that i get is: ERROR: The older version of Adobe Muse CC 2014 cannot be removed. Contact your technical support group. ERROR: Install MSI payload failed with error: 1603 - Onherstelbare fout bij installat

Can somebody please help me, i can not work on my websites anymore. Thanks !!

ERROR: The older version of Adobe Muse CC 2014 cannot be removed. Contact your technical support group.
ERROR: Install MSI payload failed with error: 1603 - Onherstelbare fout bij installatie.
MSI Error message: The older version of Adobe Muse CC 2014 cannot be removed. Contact your technical support group.
ERROR: Third party payload installer Muse_2014_2_CC_LS24.msi failed with exit code: 1603

Airport Express suddenly stopped working Error (-15006) But Green Light On

Hi There,
I have had my airport express for a few years and I use it to stream music from my macbook to my hifi.
However all of a sudden i stopped being able to see the drop down for the speakers in the bottom of itunes.
I have reset the airport express many times and reconnected it to my network which sometimes allows the speaker dropdown in itunes.
However when I get to that stage it tries to connect to my remote speakers for ages then eventually it times out or i get the error (-15006).
When tht happens the drop down menu goes completley.
I have now upgraded to itunes 9.0 and it still happens.
Please help I am getting very frustrated!

Sorry guys, I don't mean to give you a hard time, and I know I'd feel the same as you if it was my kit that was fried. Think I must have just finished reading the iPod nano article, where Apple has been slated for refusing to replace nano's that have surface scratches, even though they're still under warranty. It sounded like the usual story, consumer has purchased it, put it in their back pocket, sat down on it, put it through the washing machne and wondered why it was scratched. Funnily enough, I've kept mine in a old sock when not in use, and I've never been so stupid as to put it in my back pocket, clean it once a month and it's still as good as new.
Doesn't help your issue though, but an EU directive might. Not sure when it came into force, and I can't remember which articles it refers to explicitly, but consumer electrical goods sold in the EU must carry a minimum 3 year guarantee. I think that only applies to "white goods", fridges, washing machines, etc. But there was another part where they must have a minimum guarantee period of 2 years, for more general electrical goods.

[svn:fx-4.x] 15006: Menu check icon mirroring bug fix

Revision: 15006
Revision: 15006
Author:   [email protected]
Date:     2010-03-24 16:38:11 -0700 (Wed, 24 Mar 2010)
Log Message:
Menu check icon mirroring bug fix
http://bugs.adobe.com/jira/browse/SDK-25976 - Un-mirror the check icon when layoutDirection=rtl for menu/menuBar
Update MenuCheck and MenuCheckDisabled to use layoutDirection=LTR
QE notes: none
Doc notes: none
Bugs: SDK-25976
Reviewer: Kevin
Tests run: checkintests
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-25976
    http://bugs.adobe.com/jira/browse/SDK-25976
Modified Paths:
    flex/sdk/branches/4.x/frameworks/projects/sparkskins/src/mx/skins/spark/MenuCheck.mxml
    flex/sdk/branches/4.x/frameworks/projects/sparkskins/src/mx/skins/spark/MenuCheckDisabled .mxml
    flex/sdk/branches/4.x/frameworks/projects/wireframe/src/mx/skins/wireframe/MenuCheck.mxml
    flex/sdk/branches/4.x/frameworks/projects/wireframe/src/mx/skins/wireframe/MenuCheckDisab led.mxml

90% of browser rendering problems are caused by invalid code.   See details here:
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.i-sensors.com%2F
You have a bunch of unclosed <img /> tags on your menus.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

N97 MFE Error 15006

Hallo
I have 15 pieces N97 here in the company along with a SBS 2003 Std server. I've set up on all the Mail for Exchange. This works even if Outlook, except that the tasks are not synchronizes. what is written in the log file of error 15006
Microsoft Outlook Web Access works fine. When I have an SSL certificate purchased Thwante certificate. Somebody has an idea why everything goes out the tasks?
02.11.2009 10:53:32 Profile Updated
02.11.2009 10:53:32 PeakTime active
02.11.2009 10:53:34 start Email sync
02.11.2009 10:53:40 client->server adds=0 changes=0 deletes=0 fails=0
02.11.2009 10:53:40 server->client adds=0 changes=0 deletes=0 fails=0
02.11.2009 10:53:40 end Email sync
02.11.2009 10:53:41 start Contacts sync
02.11.2009 10:53:42 client->server adds=0 changes=0 deletes=0 fails=0
02.11.2009 10:53:42 server->client adds=0 changes=0 deletes=0 fails=0
02.11.2009 10:53:42 end Contacts sync
02.11.2009 10:53:42 clearing device entries for resync
02.11.2009 10:53:42 clearing device entries for initial sync
02.11.2009 10:53:42 start Tasks sync
02.11.2009 10:53:44 Status from server indicates a server error
02.11.2009 10:53:44 client->server adds=0 changes=0 deletes=0 fails=0
02.11.2009 10:53:44 server->client adds=0 changes=0 deletes=0 fails=0
02.11.2009 10:53:44 end Tasks sync
02.11.2009 10:53:44 Mail For Exchange Error -15006
02.11.2009 10:53:44 Mail For Exchange Error -15006
MFE Version 2.9.176 S50_5

Well, I have N97 with MFE 2.0.9.208 and all worked well till a week ago.
suddenly it stopped syncing with error 15006.
Uninstalling and reinstalling the MFE helped for 1 day and than is stopped working again.
I'm syncing to Exchange 2003 latest SP.
there is no (-) sign in the email address as well.
Any help will be appreciated.
the admin log attached.
Udi.
Attachments:
admin_log1.txt ‏23 KB

Fout:e auth user already registered

ik heb een sony ereader PRS-T1, wil een ebook downloaden van de bibliotheek, maar krijg de melding: fout:e auth user already registered.
Weet iemand de oplossing hiervoor?

Please share more information:
1. You authorized sony reader for PC with an adobe id or you authorized without an id ?
2. error "E_AUTH_USER_ALREADY_REGISTERED." you are getting on PC or sony reader device.
You can also create a new adobe id and try to authorize your device.
Thanks

An unknown error (-15006) occurred while connecting to the AirPlay device AirPort Express". How do I solve this?

An unknown error (-15006) occurred while connecting to the AirPlay device to my AirPort Express”. Does anyone know how to solve?

It may be possible the where you have the AX located may just be in a spot where it does not get a good signal even it is only 8 feet away.
I suggest that you download and install iStumbler. You will use it to determine the signal quality by making Signal-to-Noise Ratio (SNR) measurements. This will be easiest if your Mac is a laptop ... or you can borrow one. When taking the measurements, you only want your "main" AirPort running as this is what we want to measure at the location of the AX.
SNR (in dB) = Signal (in dBm) - Noise (in dBm)
You can easily find the Signal and Noise value using System Profiler on your Mac laptop.
ref: Click on the Apple icon on the menu bar > About This Mac > More Info... > Contents > Network > AirPort > Interfaces > en1 > Current Network Information > Find your wireless network > Signal / Noise
While your still in the System Profiler, note the value for Transmit Rate.
These values should be negative numbers. For example, mine currently read: -67 dBm / -95 dBm, with a transmit rate of 27 (Mbps). Plugging in these numbers yield: SNR = -67 - (-95) = 28. My Mac Mini is about four rooms away from my AEBS with about five walls between them. As you can see, the signal is still quite useable ... but the bandwidth is minimal, especially for streaming.
SNR Guideline
40dB+ SNR = Excellent signal
25dB to 40dB SNR = Very good signal
15dB to 25dB SNR = Low signal
10dB to 15dB SNR = Very low signal
5dB to 10dB SNR = No signal
Please post back your results.

Fout (-15006)

Similar Messages

Maybe you are looking for