Fox and Dates

Has anyone out there computed the difference (i.e., the number of days; not working days - just days) between dates and then used the result in a computation?
If so, please respond.  Would appreciate any assistance.
Thx

Your add-on data is still stored in your old settings folder. You could switch back to your old settings, or you could contact the add-on developer for suggestions on how to copy them over to the new folder.
Each settings folder is termed a "profile." To change between different profiles, you can start up Firefox in the Profile Manager. See this article for information on how to start up the profile manager: [[Use the Profile Manager to create and remove Firefox profiles]]. The one you last used will be selected. Try another one to get back to your earlier settings.
And to fix video problems in your old profile, see whether this article helps: [[Flash 11.3 doesn't load video in Firefox]].

Similar Messages

  • I want to adjust the column width of "From", "Subject" and "Date". in the AT&T email within Firefox browser

    My computer runs under Windows Vista Home Premium, and Firefox browser 3.6.13. Within the Firefox browser, it shows an AT&T email window (www.sbc.yahoo.com). There are several columns such as subject, date, etc. I was able to adjust such column width before. Now I cannot do it. (Also I can adjust column width if I run in the Internet Explorer. I have another computer running Window 7 professional, same set up with Fire Fox and AT&T email, I am able to adjust the column width so I can show the full subject line.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    You can also try to set the pref layout.frames.force_resizability to true on the about:config page.
    See also http://kb.mozillazine.org/about%3Aconfig

  • Pg Number, File path and date automatically printed?

    Is there a way to automatically print the page number, complete file path and date at bottom of each  page (set to landscape)?
    Thanks!

    Thanks Carlos,
    It looks like the work72a would work if we were using macs, but we're not...
    And there is NO WAY my boss will pay $999 for the other one, even if it did work.
    So, now I'm open to other suggestions. We have hundreds of clients that we do work for, and our jobs are organized in folders for each client. A lot of clients with the same name but different locations (ie., Fox Meadow OH, Fox Meadow TX), and each has a different folder. The files are named by dept and year (ie., 2012 Glass, 2012 Art). We often access old files (which, there are thousands of, because they have been organized this way for years.) We need to have the client folder on the page along with the file name (hence the file path).
    The script that Carlos created is great, but there are too many steps. Open the script, change location and select info to be displayed (3 steps), close script. There are days we access 50 jobs and the script just added 5 plus steps to each job.
    Is there a way to use a hot key run a script that will place the info when and where we need it and auto close the script? Or is there a way to display the full path (in the Illustrator tab?) where we can see which folder the file is in and we will manually type the folder? Or does anyone have another suggestion?

  • DSO - What key fields and data fields in dso

    Hi experts,
    I need to create a dso in between the cube and 2 data sources(2lis_11_vaitm, 2lis_12_vcscl) to stage the data. My question is: what key fields and data fields to choose for the dso? is there a standard dso to copy? please explain in detail the model to set up, whether to connect both the ds's to dso and then to cube or one ds to dso and the other to the cube. more details will help.

    Check this for standard DSO:
    http://help.sap.com/saphelp_nw04/helpdata/en/43/fcdc387f34384f94c3227baf3837a8/content.htm
    Thanks...
    Shambhu

  • Reading MS Project column names and data on the fly from a selected View

    Hi guys,
    I have several views on my project file (MSPROJECT 2010) and I want to build a macro so that;
    1. User can select any view ( Views can have diffrent columns and the user may add new columns as well)
    2. User runs the Macro and all the coulmns along with the tasks displayed in the view will be written to a excel file. ( I don't want to build several macro's for each view, I'm thinking of a common method which would work for any selected view)
    The problem I'm facing is that how will i read the column names and data for a particular view on the fly without hard coding them inside the vba code ?
    The solution needs to work on a master schedule as well.
    Appreciate your feedback.

    Just to get you started the following code writes the field name and data for the active task to the Immediate window.
    Sub CopyData()
    Dim fld As TableField
    For Each fld In ActiveProject.TaskTables(ActiveProject.CurrentTable).TableFields
    If fld.Field >= 0 Then
    Debug.Print Application.FieldConstantToFieldName(fld.Field), ActiveCell.Task.GetField(fld.Field)
    End If
    Next fld
    End Sub
    Rod Gill
    Author of the one and only Project VBA Book
    www.project-systems.co.nz

  • Pdf portfolio source file name and date in file details

    Is it possible to import the source file name and extension as well as the source file created date in the portfolio file details?  Need to document source to portfolio in working with 3rd parties that will only have the original source.  Need to document what was converted into pdf as not all files in a directory will successfully convert to pdf.  Sometimes need to convert 100's of files.  Manual entry is inefficient.  the file names and modified dates are displayed on the Combine Files dialog.  is there a way to capture the detail on that page?

    I don't need the detail of when the pdf was added to the portfolio.  I
    need know which dwg or jpg or word file was converted and the original
    created date of that file for control of information.
    That is impossible; sorry. For some *very specific* types of conversion to PDF the pdfx:SourceModified XMP tag will be set to show the last-modification date of the source file (for example DOCX files converted using MS Word), but there will never be a human-readable record of the source filename or its creation date unless you have manually added them as document XMP properties after conversion (this is what the "Custom Properties" dialog is for). To embed source data automatically would raise no end of privacy and security problems for customers, who most certainly do NOT want their recipients seeing details of internal documents.
    Without writing a plugin there's no access to the internal workflow of the Combine Files dialog, so you cannot use a script to read the names and dates of the files *before* conversion and store them automatically in the new PDF Portfolio's Fields array.

  • Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    Hello. Most of the engineers in developer exchange are more familiar
    with NI products. Contacting ICS for technical support is a better
    course of action.

  • How can we get Dynamic columns and data with RTF Templates in BI Publisher

    How can we get Dynamic columns and data with RTf Templates.
    My requirement is :
    create table xxinv_item_pei_taginfo(item_id number,
    Organization_id number,
    item varchar2(4000),
    record_type varchar2(4000),
    record_value CLOB,
    State varchar2(4000));
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'USES','fever','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'HOW TO USE','one tablet daily','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'SIDE EFFECTS','XYZ','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'DRUG INTERACTION','ABC','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'OVERDOSE','Go and see doctor','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'NOTES','Take after meal','TX');
    select * from xxinv_item_pei_taginfo;
    Item id Org Id Item Record_type Record_value State
    493991     224     1265-D30     USES     fever     TX
    493991     224     1265-D30     HOW TO USE     one tablet daily     TX
    493991     224     1265-D30     SIDE EFFECTS     XYZ     TX
    493991     224     1265-D30     DRUG INTERACTION     ABC     TX
    493991     224     1265-D30     OVERDOSE      Go and see doctor     TX
    493991     224     1265-D30     NOTES     Take after meal     TX
    Above is my data
    I have to fetch the record_type from a lookup where I can have any of the record type, sometime USES, HOW TO USE, SIDE EFFECTS and sometimes some other set of record types
    In my report I have to get these record typpes as field name dynamically whichever is available in that lookup and record values against them.
    its a BI Publisher report.
    please suggest

    if you have data in db then you can create xml with needed structure
    and so you can create bip report
    do you have errors or .... ?

  • Diff B/w ABAP Dictionary and Data Dictionary

    What is the difference between ABAP Dictionary and Data Dictionary........

    Hi,
    Both are the same.
    Please check this online document perhaps it may help.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCDWBDIC/BCDWBDIC.pdf
    Regards,
    Ferry Lianto

  • ICloud sync and data usage

    After upgrading my ATT iPhone 4 to iOS5, I thought I would try out iCloud. I read somewhere, that it only syncs when it is connected to a powersource, and maybe I read that wrong, but I interpret it to mean when I am connected to either a power outlet or my computer using the cable. In otherwords, it wouldn't sync while I was out and about, away from my wireless home network, using the 3G network.
    Is this not correct?
    Because 2 days ago I racked up 80 MB of my data plan (not iCloud storage) while I slept at home, where I have a wireless network. I found this out by getting a text warning from ATT the next day, that I was close to using up my alloted 200MB data usage. I checked out my account online, and sure enough the 80MB transferred in the middle of the night. I didn't notice the "documents and data" setting was turned on so it looks like my apps updated while my phone was in sleep mode. Is there anything else it could be? I have everything iCloud turned off now and wondering if there is something I should know about to avoid wasting my data usage?

    elko wrote:
    After upgrading my ATT iPhone 4 to iOS5, I thought I would try out iCloud. I read somewhere, that it only syncs when it is connected to a powersource, and maybe I read that wrong, but I interpret it to mean when I am connected to either a power outlet or my computer using the cable. In otherwords, it wouldn't sync while I was out and about, away from my wireless home network, using the 3G network.
    Is this not correct?
    Because 2 days ago I racked up 80 MB of my data plan (not iCloud storage) while I slept at home, where I have a wireless network. I found this out by getting a text warning from ATT the next day, that I was close to using up my alloted 200MB data usage. I checked out my account online, and sure enough the 80MB transferred in the middle of the night. I didn't notice the "documents and data" setting was turned on so it looks like my apps updated while my phone was in sleep mode. Is there anything else it could be? I have everything iCloud turned off now and wondering if there is something I should know about to avoid wasting my data usage?
    I think possibly you are thinking about wireless sync of iTunes. That can be set to happen when you connect to a charger etc, but that is not the same thing as you are descrbing with iCloud.

  • Loading MS Access Table and Data into Oracle

    Hi,
    I have few tables in MS Access. I want to create same layout of tables in Oracle and want to populate data from MS Access tables to Oracle tables.
    Please let me know if there is a way by which I can create tables and load data automatically (thru some option or script)?
    I have Oracle 10g database and its clients.
    Thanks in advance,
    Rajeev.

    You can use Oracle migration workbench
    Loading MS Access Table and Data into Oracle
    It´s very easy to use and good to import
    regards,
    Felipe

  • Question regarding roaming and data usage

    I am currently out of my main country of service, and as such I have a question regarding roaming and data usage.
    I am told that the airplane mode is sufficient from keeping the phone off from roaming, but does this apply to any background data usage for applications and such?
    If the phone is in airplane mode, are all use of the phone including wifi and application use through the wifi outside of all extra charges from roaming?

    Ann154 wrote:
    If you are getting charged to use the wifi, then it is possible.  Otherwise no
    Just to elaborate here, Ann154 is referring to access charges for wifi, which is nothing to do with Verizon, so if you are using it in a plane, hotel, an internet cafe etc that charges for Wifi rather than being free .   Verizon does not charge you (or indeed know about!) wifi usage, or any other usage that is not on their cellular network (such as using a foreign SIM for example in global phones)  So these charges, if any, will not show up on the verizon bill app.  Having it in airplane mode prevents all cellular data traffic so you should be fine

  • Infoset Join condition on Key feilds and data fields

    Hi Guys,
    I have a requirement to biuld the Info set with join conditon on two DSO's  the info objects which i am using in the JOin condition are defined as data fieds in one DSO and defined as key fields in another DSO, is it possible to define join condition on key fields and data fields.
    The two info objects are                
                           0AC_DOC_NO
                           0ITEM_NUM
    These two info objects are defined as  data fields in DSO :   0LIV_DS1   Invocie verificaion
                                                            key fields in DSO:    0FIAP_0o3 FI AP Line Item
    Please suggest me is it possible to define join the condtion on the data fields and key feilds.
    Thanks
    Best regards
    SG

    Hi
    yes you can create join, you will get any issue in reporting level.
    example: Say i want to create Info Set on 0MATERIAL and Sales DSO.
    In 0MATERIAL Info Object it is key filed, but in my DSO 0MATERIAL is data field.Still we can create
    Creation of join is dependent on fields common in your source objects.
    check out the below document
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7?QuickLink=index&overridelayout=true
    Regards,
    Venkatesh
    Edited by: Venkateswarlu Nandimandalam on Sep 27, 2011 2:26 AM

  • Key fields and data fields in a DSO  ??

    i have a question regarding key fields and data fields in a Standard DSO...
    i am using 2 datasources to build a open sales report 2LIS_11_VASTH  and  2LIS_11_VASTI   i am pulling in data from these 2 data sources to a DSO and i am wondering what infoobjects should be in the key fields and data fields .....does this reflect back to table VBUK and VBUP tables and does the key field in the DSO have to be the key fields in VBUK and VBUP tables  ????  or what really should be included as key fields and data fields   ????  
    please help....

    If you look at the various SD tables, VBELN and POSNR are commonly used as the document number and document line item.
    For VBAP and VBUP, it's referring to the Sales Order Line Item with the columns VBELN and POSNR as the key for both tables. However, if you look at the LIPS table, which is the Delivery Line Item table, it too has VBELN and POSNR as the key. Likewise, the VTTP table, which is the Shipment Line Item table, also has VBELN and POSNR as the key.
    While using RSOSFIELDMAP as a map is a fairly good "rule of thumb", it still needs to be used with a level of skepticism.

  • Prerequsites for deciding Key fields and data fields

    Hi
    I would like to know the criteria to decide upon KEY fields and Data fields for an infoprovider.

    Hi,
    What is a Key field in a Database and How should I choose one?
    Keys are crucial to a table structure for many reasons, some of which are identified below:
    They ensure that each record in a table is precisely identified.
    They help establish and enforce various types of integrity.
    They serve to establish table relationships.
    Datafields may be Charecteristics and it may be keyfigures
    Regards,
    Marasa.

Maybe you are looking for