Fox prevented from normally operating by the unknown.

The situation starts exactly as described here already in the Question by OrfamayQuest user - "Firefox will not start--a series of problems", i.e. upon opening Fox there turns up the Alert window:
" Could not initialize the application's security component. The most likely cause is problems in your application's profile directory...". A number of other problems involved (e.g. can't get to many places: "...the SSL protocol has been disabled" (with the setting showing - it's not!) - even now to be in the MF Forum must enter through IntExpl, not Fox).
What done: uninstalled MF completely, checked that no trace (to my knowledge) of it remains on PC; installed anew, restarted PC - no change. Yet, same PC entered by another user: same Fox works o.k.
What tried: advice on mentioned Question by "cor-el" consultant and many more available from Fox support site - all to no avail.
Somebody, help! Fox killing! Dare suggest a browser should not be THAT complicated to handle!

Hi Friend,
Go for 0x2102
http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a008022493f.shtml#config-reg-meaning
HTH
Ankur
*Pls rate all helpfull post

Similar Messages

TS1389 Even after I remove SC Info folder, I am prevented from accessing 1 of the 34 tunes on a purchased album. What next?

Even after I remove SC Info folder, I am prevented from accessing 1 of the 34 tunes on a purchased album. Keeps prompting me to authorize computer. What next?

If you're only getting the authorisation alert on one track on the album, that suggests the track is damaged.
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Will interlocked operation only prevent other interlocked operation on the same location or any visit to the same location?

when reading
https://msdn.microsoft.com/en-us/magazine/cc163715.aspx , i found the following statement:
interlocked operations guarantee that the update is atomic. This requires the processor to insure that no other processor is also trying to execute an interlocked operation on the same location at the same time.
my question is, what if other thread is trying to read the same location at the same time without using a interlocked operation, will an interlocked operation prevent this?
I was using a readerwriter lock to sync my threads operation on an object. and i found interlocked.compareexchange is handy to initialize the object: interlocked.compareexchange(ref object, FunctionThatReturnAnIntializedObject(),null). However, i am not
sure whether other threads can read that object during the interlocked operation? If they can, how can i prevent them?

"However, i am not sure whether other threads can read that object during the interlocked operation? If they can, how can i prevent them?"
If I understand correctly you're trying to lazy initialize a variable.
Why aren't you using Lazy<T> to begin with, it does exactly what you want if you use LazyThreadSafetyMode.PublicationOnly.
But to answer to your question: mixing interlocked and non-interlocked accesses is problematic. There are a lot of cases where doing this won't work and some cases where it works.
In your particular case this interlocked/non-interlocked mix should work fine. In addition to being atomic .NET's interlocked operations are also supposed to be full fences. A full fence prevents other read/writes from being moved before/after the interlocked
operation and that's exactly what you need to prevent the writes required to initialize the object from being moved after interlocked.
If the thread that doesn't use interlocked to read the object variable gets a non-null reference then it means that the initialization of the object was done, otherwise it couldn't have got a non-null reference in the first place.
There is a small chance to run into a problem caused by compiler optimizations. If the thread that doesn't use interlocked has a loop like the following then it's possible that the loop will never end.
while (object == null) { ... }
That's because in the absence of volatile and interlocked the compiler can read "object" into a register before the loop. The loop test will keep comparing the register value with null and the loop will never end. Such a situation is rather unlikely
but you should make the object variable volatile to avoid this.

Hi, I would like to ask you a question. a month ago I bought a battery case for iPhone 5 and it worked properly until I installed iOS 7. From that day iphone is operating normally, but when the battery is empty, unfortunately I can not charge additionall

Hi,
I would like to ask you a question.
a month ago I bought a battery case for iPhone 5 and it worked properly until I installed iOS 7. From that day my iphone is operating normally, BUT when the battery is empty, unfortunately I can not charge additionally my iphone with the "extra battery case".
Does that mean that you did not even create a new software that supports additional battery case or it is something else?
I need your help!!,
Thank you in advance.
Sincerely,
VK

The Mophie Air is a good battery case, but doesn't offer the protection she's looking for. I suggest sticking to the Lifeproof, the iPhone has a very good battery (2-3 days moderate usage for me).
To your 2nd to last paragraph, that is false. Verizon is allowing exisiting customers to keep Unlimited Data - but will lose it once they use a subsidized upgrade. So if you buy a 4S (or LTE device for example) outright, you will keep unlimited data. Mobile hotspot may use up a bit of data, but it is a separate add-on/feature. The new Family Share plans may change that, so it's one giant center of data all devices use.

-- A file association problem exists, which prevents the file you're trying to download from being associated with the correct application by the operating system using window 7 IE 11

A file association problem exists, which prevents the file you're trying to download from being associated with the correct application by the operating system
USING WINDOW 7 IE 11 HOW CAN I FIX???

Try downloading the offline installers:
Adobe Reader
Flash Player for Internet Exporer - ActiveX
Flash Player for Firefox - NPAPI

How to prevent user from "normal" navigation?

Hi everyone,
I have a PDF with a lot of pages, which are connect through Links (It's an export from MS Visio).
I now want all the users to keep navigating through the links and prevent accidental navigation through the "normal" way (Arrow-Keys, Mouse-Scroll, etcs...) as much as possible.
For this I have three ideas:
"Force" Fullscreenmode: Here I can prevent from advancing in pages by clickAdvances=false. However I think it's not possible to prevent page changes by mouse-scroll or key-press.
Using Layers: I have read, that it is possible to show/hide layers on demand with js. But I don't know how this can be done. And I would have to change the links to js-function showing the needed layer...
Loading/Deleting Pages: I could load and delete Pages on demand. This is probably slow and i would need two pdf files.
Does anyone knows something that could help me to solve this problem?
Cheers, Holger.

1. Not possible (except if the additional method described below is used).
2. This is possible, but it requires setting up the layers and then a system of buttons and scripts to show/hide them.
3. Also possible, but much more complicated than using layers.
Another option is to use a script to prevent the user from entering a page, unless its done via a button.
However, all of these methods have their disadvantages and can be very annoying for the users. You should really think if you want to implement this feature...

When clicking websites my Avast 5.0 antivirus notifies me that a malicious URL is trying to access my system or that a Trojan has been prevented from access. The attempted Malware/Trojan is always from the same address:[Ticon.in/nte/kuz/.exe/xhdoe515bvo3

suspicious Maleware / Trojan.
== This happened ==
Every time Firefox opened
== I tried to access a website

Hello "Morbus",
Thank you for your quick and informative reply. First I would like to provide more information on this attempted Malware/Trojan. I have copied the full addresses for you and/or anyone who may have interest. It follows below.
28.06.2010 07:38:00 Network Shield: blocked access to malicious site 楴祣湯椮⽮瑮⽥畫⹺硥e [ C:\program files\Mozilla Firefox\Firefox.exe ( 5436 ) ]
28.06.2010 08:14:44 Network Shield: blocked access to malicious site 楴祣湯椮⽮瑮⽥畫⹺硥e [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 4476 ) ]
28.06.2010 13:32:53 Network Shield: blocked access to malicious site 楴祣湯椮⽮瑮⽥畫⹺硥e [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 1988 ) ]
28.06.2010 17:51:53 Network Shield: blocked access to malicious site 楴祣湯椮⽮瑮⽥畫⹺硥e [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 5400 ) ]
29.06.2010 13:31:03 Network Shield: blocked access to malicious site ticyon.in/nte/kuz.exe [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 2444 ) ]
29.06.2010 23:15:14 Network Shield: blocked access to malicious site ticyon.in/nte/kuz.exe [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 480 ) ]
30.06.2010 09:36:22 Network Shield: blocked access to malicious site ticyon.in/nte/kuz.exe/wHd0e51a5bV03006f36002Ra38dbe4f108T9ccfa9f8Q000002fe901801F0035010aJ14000601L656e2d55530000000000 [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 5164 ) ]
30.06.2010 22:31:52 Network Shield: blocked access to malicious site ticyon.in/nte/kuz.exe/wHd0e51a5bV03006f36002Ra38dbe4f108T9ccfa9f8Q000002fe901801F0035010aJ14000601L656e2d55530000000000 [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 3600 ) ]
I had failed to mention in my previous comments that each time the attempted attacks took place, a blank Adobe PDF page appeared. As you suggested, I disabled the Adobe add-on and have had no further attacks. I am extremely dilligent in keeping my SuperAntiSpyware Pro, AvastAntiVirus 5.0, ThreatFire, Vista Firewall Control, Malewarebytes and Windows Defender up to date. However, after any attack I always run these in safe mode just as a precaution. I had suspected the Adobe drop-in may have been the culprit because of the page that appeared and your suggested fix has in fact fixed it!
Thank you again for your unselfish time in coming to my rescue. "Deaf Dave"
From: [email protected]
Date: 7/1/2010 12:53:40 PM
To: [email protected]
Subject: Reply notification: when clicking websites my Avast 5.0 antivirus notifies me that a malicious URL is trying to access my system or that a Trojan has been prevented from access. The attempted Malware/Trojan is always from the same address:[ticon.in/nte/kuz/.exe/xhdoe515bvo38d
"Morbus" has posted a reply to a thread you're watching.
You can view the thread and reply at the following URL:
https://support.mozilla.com/en-US/forum/1/714170#threadId714337
Message:
Hello Deaf Dave.
It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
Also, it's possible that your system is infected with malware. To scan for malware, install, update and run these programs ''in this order''. They are all free for personal use, but some have limited functionality in their "free mode", but the features you'll miss are not really needed to find and remove the problem you have. Remember that ''not all programs detect the same malware''!
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php malwarebytes.org/mbam.php]
SuperAntispyware - [http://www.superantispyware.com/ superantispyware.com]
AdAware - [http://www.lavasoftusa.com/software/adaware/ lavasoftusa.com/software/adaware]
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html safer-networking.org/en/index.html]
Windows Defender - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx microsoft.com/windows/products/winfamily/defender/default.mspx]
Dr. Web Cureit - [http://www.freedrweb.com/cureit/ freedrweb.com/cureit]
If these don't find it or can't clear it, please tell me and I'll provide you with further assistance.
Did this response solve your problem with Firefox?
Yes, this solved my problem (click here):
https://support.mozilla.com/tiki-feedback.php?id=714170&hash=6d5f163b3092b464aa15d04188b5cca2&type=forum_topic&feedback=Firefox%20Support%20Forum&commentId=714337
No, this did not solve my problem (click here):
https://support.mozilla.com/en-US/forum/1/714170?hash=6d5f163b3092b464aa15d04188b5cca2#form
If you no longer wish to receive notifications for this thread,
visit the following URL to cancel your subscription:
https://support.mozilla.com/tiki-cancel_watch.php?section=forum&hash=6d5f163b3092b464aa15d04188b5cca2

Preventing AIR Windows from showing up in the taskbar

Is it possible to prevent a normal type window from showing
up in the taskbar? I would like the normal window systemchrome on
my windows but want them to act like a utility type window. Any
help is appreciated.
Mike

bump

Recover from TM to external usb drive while in normal operation

I know only one point where the recovery process can be started, it is the recovery mode cmd+R.
As soon as in recovery mode the Mac is not available for other tasks.
The situation is that a TM backup resides in network.
We like to test that backup by recovering it to an external usb drive.
For this we need to boot in recovery mode.
However the test should take place in background so the regular tasks can continue normally.
How to start recovery from TM on network to external usb drive connected to Mac
but while Mac is in normal operation?

Aimed goal is quite simple.
Whole OS X Mavericks installation has to be restored from Time Machine backup, whereby
Time Machine backup is in LAN on some NAS
It has to be restored/recovered to usb drive connected to the Mac those TM backup is of
The recovery process has to run in background
In foreground the regular job can be conducted (means the OS X is in normal operation)

Preventing the User from going back to the main page after logging out.

Hi all,
In my project I want to prevent the User from going back to the Main page, by clicking the back button of the browser, after the user has loggged out.I had invalidated the session so the user will not be able to do any operations, but he can vew the infos. I want to redirect to the login page if the user tries to go back using the back button after he has logged out.
I tried the same in this forum after loging out. Surprisingly it is the same. I can browse through all the operations i did even after logging out from here.
Is it not possible to do that in Servlets?Could somebody help?
Thanks,
Zach.

Hi,
You can use a servlet filter to do this , as it can interceptany request to your application you can decide to allow user access or not to any page/servlet.
public class Test implements Filter{
     public void destroy() {
     public void doFilter(ServletRequest arg0, ServletResponse arg1, FilterChain arg2) throws IOException,
               ServletException {
          System.out.println("filter");
          HttpServletRequest request = (HttpServletRequest) arg0;
          if(!request.getRequestURI().contains("index")){ // set condition that will be checked to verify if the user is logged in
               System.out.println("redirecting ... ");
               RequestDispatcher d = arg0.getRequestDispatcher("/index.jsp");
               d.forward(arg0, arg1);
          arg2.doFilter(arg0, arg1);
     public void init(FilterConfig arg0) throws ServletException {
}in you web.xml add :
<filter>
          <filter-name>test</filter-name>
          <filter-class>test.Test</filter-class>
     </filter>
     <filter-mapping>
          <filter-name>test</filter-name>
          <url-pattern>/*</url-pattern>
     </filter-mapping>

I get a message Fire Fox prevented this page from automatically redirecting to another page, everytime I log into a bank or credit card web site?

When I log into my bank or credit cards websites I get a message that says "Fire Fox prevented this page from automatically redirecting to another page." It says "Allow" or an X. Sometimes I can click Allow and it goes but then other times if I click Allow on it kicks me out. If I click "X" it goes but I have to click X every page. How can i stop this?
Mary

See: Tools > Options > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
See: [[Options window - Advanced panel#General_tab]]
See also: http://kb.mozillazine.org/accessibility.blockautorefresh

Office 365 AAD Password Writeback not working; Event Viewer Error: 0x80230619 (A restriction prevents the password from being changed to the current one specified.)

Hello all,
I'm currently setting up a Proof Of Concept setup with directory synchronisation and password syncing to Office 365, leveraging AAD Premium for the password reset and password writeback to on premises
AD functionality. Directory Sync + Password Sync is working flawlessly with the AADSync tool. However, upon requesting a password reset for a user, I'm hitting a password writeback error. The webpage states that the password does not meet the password
complexity policy, while it does. I can set that particular password for that account at the on premises AD without any problem.
In the event viewer at the AADSync server, I'm seeing this Error pop up whenever I try to reset the password:
An unexpected error has occurred during a password set operation. "BAIL: MMS(4032): ..\server.cpp(11003): 0x80230619 (A restriction prevents the password from being changed
to the current one specified.) Azure AD Sync 1.0.0475.1202"
My Setup:
Windows Server 2012 AD with a single forest
Seperate domain joined Windows Server 2012 for AADSync tool
AADSync version 1.0.0475.1202 with options password sync, password writeback enabled
Service account for AADSync tool with Replicating Directory Changes and Replicating Directory Changes All permissions
on root AD forest structure with inheritance to all objects. This account also has the permissions to Change Password and Reset Password on all descendant
User Objects.
AAD Premium for my office 365 tenant
AAD Premium licenses for the test users and the office 365 account used to sync to Office 365. This account is also Global Admin.
Could anyone help me with this? Is there something I’m missing here? My guess is that the AAD is not trusted or the service account for AADSync tool does not have the proper permissions. I’ve tried
many options, like setting the AADSync Service account to Enterprise Admin or granting the service account Full Control over that particular user.

Concerning my issue:
The Default Group Policy setting: Minimum Password Age is set at 1 day. As I was testing this feature with new users, their provisioned passwords were less than 24 hours old and the Minimum Password Age of 1 prevented the change of the password.
After changing this to 0 days in the Default Group Policy, my password resets started working for newly created users. While this might not have affected existing users in production, it had me looking and searching for permission issues on my AD.
So for those that might be experiencing ADSync Event ID 6329 and PasswordResetService Event ID 33008 Errors when trying to do a Password Reset using AAD Premium with Password Writeback, it might be helpful to check the applied password policy.
The issue is solved.

How can an iTunes Match user prevent songs from being uploaded to the iCloud?

Has anyone who is currently using iTunes Match found a way to prevent selected songs in their music library from being uploaded to the iCloud. I have a number of audio files that are hour long mixes, but aren't quite large enough to run afoul of the 200MB size limit. I'd like to keep using iTunes Match, but would like to prevent it from trying to upload any of these larger files. Any help would be greatly appreciated. Thank you!

Another oddity I just discovered is that if I turn on wifi hotspot on my phone and connect my iMac to my phone's 3G service then iTunes on my iMac will stream music just fine from iTunes match (yes, the music was only in the cloud, not on my drive).
I've tried everything I can think of to get iTunes Match to play tracks over cellular.. including totally deauthorizing all my computers and devices, totally removing all tracks my itunes match in the cloud and re-scanning/uploading everything. Purchased new tracks, and they won't play unless they are downloaded. But they will play just fine when previeing them for purchase in iTunes app.

My mid-2010 27" iMac running Mavericks is fine in safe mode, but with normal boot up the screen goes haywire with some animation emanating from the apple menu area at top left of screen.

From what I'm reading in these forums, this is likely an issue due to some 3rd party software / kernal conflict. I am going to run a diagnostic and perhaps someone here can help me evaluate the results and determine what software must be removed.
It's hard to describe what I'm seeing on screen. I've never seen anything like it. I get a number of lines that begin at the top left of my screen, about at the apple icon, and they spread out in a triangular pattern from left to right, top to bottom across my screen, while the entire screen flickers uncontrollably. I realize that iMacs from this era have screen issues, but since I can boot fine in safe mode, this can't be a hardware issue.
Any assistance is greatly appreciated!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri|sshd?_c)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf,ssh{,d}_c*} {,/usr/local}/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I was doing some thing on my mac and the normal link to the applications folder from the bottom right hand corner disappeared, I cant find it anywhere, Can you help me?

I was doing some thing on my mac and the normal link to the applications folder from the bottom right hand corner disappeared, I cant find it anywhere, Can you help me?

Simple process. If an iPhone go to the Apple Store and not Verizon
the phone from Verizon will be a refurbished device and not new unless under the 14 day worry free guarantee
good luck

Fox prevented from normally operating by the unknown.

Similar Messages

Maybe you are looking for