Foxfire error message that I already have the application running. But when I check the system manager, I don't see that Foxfire is running.

Often, when I click on Foxfire, I get an message saying that Foxfire is already running and I have to close it to start it agai. But when I look at the sys manager (ctl/alt/delete) it does nopt show that Foxfire is running.

Sounds like it is hanging when you exit and later try to restart Firefox.
* How to stop the running Firefox process
** In Task Manager, does firefox.exe show in the '''<u>Processes</u>''' tab?
** See: http://kb.mozillazine.org/Kill_application
**Windows 7 Task Manager: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
* What may cause Firefox to hang at exit
** http://support.mozilla.com/en-US/kb/Firefox+hangs
** http://kb.mozillazine.org/Firefox_hangs
** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
* You may need to try Firefox Safe Mode
** You may need to use '''Safe Mode''' to locate the problem: http://kb.mozillazine.org/Safe_Mode
**Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''<u>before</u>''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''<u>one at a time</u>''' until the problem reappears. '''<u>You MUST close and restart Firefox after EACH change</u>''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
** See the following for more information
*** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting
'''Other issues that need your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.
*Next Generation Java Plug-in 1.6.0_23 for Mozilla browsers
**'''''Security update version 1.6.0_24 released 2011-02-10'''''
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to <u>un-check the Yahoo Toolbar</u> option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Similar Messages

  • Can't install Acrobat X Pro. Error message says I already have a more functional product installed.

    I'm trying to install Adobe Acrobat X Pro. I continue to receive error messages saying I already have a more functional product installed. I have FM 12 and Adobe Reader XI.

    Hi Beth,
    You should not receive this message if you dont have Acrobat 11 installed.
    Try removing Reader 11 and check.
    Regards,
    Rave

  • If I am downloading a new version of an album that I already have in itunes, do I need to delete the older version before downloading the new?

    If I am downloading a new version of an album that I already have in itunes, do I need to delete the older version before downloading the new?

    No, you don't need to.

  • Hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing play

    hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing plays.

    Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
    If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode.

  • PLUG INS check tells me that Shockwave Flash plugin is outdated. But when I check on Adobe website, I have the current version of this plugin (11.3.300.257)

    PLUG INS check tells me that Shockwave Flash plugin is outdated. But when I check on Adobe website, I have the current version of this plugin (11.3.300.257)
    I saw similar posts, but none recent.

    I'm having the same issue...
    According to the Shockwave homepage, I have the lastest version installed. It's only when I visit the Firefox plug-in update page, that I'm told it's outdated.

  • Using Windows 7 and LR 5  when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword.  Why does the Library Filter showi

    Using Windows 7 and LR 5,  when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword.  Why does the Library Filter showing pictures that do not match the query

    Dan,
    Here's what's going on in the catalog you sent me, "Joel & Caitlin's Wedding".  There is the keyword "gwenn", which is explicitly assigned to 7 pics. But keyword "schwartz" has a number of synonyms, including "gwenn", and it is assigned to 25 pics.  There is no overlap between the two sets of pics. 
    I discovered these two occurrences by doing Metadata > Export Keywords, opening the exported file in an editor, and then searching for "gwenn".  I found two occurrences of "gwenn":
    gwenn
    schwartz
        {gwenn}
    From this, you can see that the keyword "schwartz" has 9 synonyms, of which "gwenn" is one.
    The filter criterion "Keywords Contain gwenn" will match the 7 pics that are explicitly assigned the keyword "gwenn", and it will also match the 25 pics assigned the keyword "schwartz", because that keyword has a synonym "gwenn".
    This illustrates the behavior I mentioned above: The criterion "Keywords contains x" will match against any of a pic's assigned keywords, any of those keywords' ancestor keywords, and any of the synonyms of the assigned keywords and their ancestors.
    So LR is operating correctly here, if not in a way that's easy to understand. 
    It appears that you are using the synonyms of "schwartz" to represent individual members of the Schwartz family.  A better way of representing family relationships is to have a parent keyword "Schwartz", with subkeywords for each family member, e.g. "Gwenn Schwartz", "Joe Schwartz", "Jane Schwartz", etc.  Repeating the family name in the subkeywords has a couple of advantages. LR usually only displays the "leaf" name of a keyword, so instead of showing you just "Joe", it will show you "Joe Schwartz", helpful when there are a number of different people whose first name is "Joe".  Also, if you ever export your pics to other software, it may not understand the LR hierarchy and won't show the parent keywords, so again it's more informative to see a keyword named "Joe Schwartz" rather than "Joe".

  • I have an iPhone 4s. My problem is I get email, but the email has no body. It will give the preview fine, but when I open the message there's nothing there. Help...please.  :)

    I get email notifications, and the email shows the correct preview, but when I open the email, there is no body... Nothing.  Please help.  Thanks! :)

    One last thing, neither itunes or iphoto recognize the iphone, whenever the ipone is connceted to any device, it is not read, its like plugging it into a wall.

  • HT4061 Recently I upladed the iOS and I have set a password, but when I entered the same it's now given as the "iPad is disabled"

    Recently I upladed the iOS and I have set a password, but when I entered the same it's now given as the "iPad is disabled"

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I have tried to download Mavericks on my 2010 iMac(10.6.8), but nothing happens, not even the install app downloads, also I tried to download chrome, I moved it to the applications folder and when I opened the folder it wasn't there

    I have tried to download Mavericks on my 2010 iMac(10.6.8), but nothing happens, not even the install app downloads, also I tried to download chrome, I moved it to the applications folder and when I opened the folder it wasn't there. I have a 1tb hard drive that is mostly empty. By the way I just got this imac used from a reseller.

    Mavericks downloads into the Applications folder, where you can install it.   Some Mac App Store Troubleshooting information and how to resume a download that was interrupted; some of the information here might get you an answer.   Failing that, try contacting Apple Support.

  • When I tried to back up my computer, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old files, the folders are there, but NONE of the files are.

    I haven't backed up my computer in over a year. When I tried to back it up today, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old photos and documents (including all the pictures from the year I studied abroad/traveled a bunch), the folders are there, but NONE of the files are.
    Does anyone have any idea what the problem might be, or how I could fix it? I really don't want to lose all those photos

    So you were doing a time machine backup to another partition on the same hard drive? Just trying to gather some information so i can provide a helpful response.

  • I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

    I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.  I've tried several USB connectors, and several different ports on my USB hub; same result.  I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

    Hi,
    I am currently replying to this as it shows in the iChat Community.
    I have asked the Hosts to move it to Snow Leopard  (you should not lose contact with it through any email links you get)
    I also don't do Wirelss printing so I can't actaully help either.
    10:01 PM      Friday; July 29, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?!

    When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?! and then I'd like to erase the original files since the space requirement is huge!!!! Why is upgrading software iPhoto such a pain. I've gotta get a presentation done and all I get for my money is roadblock!!!

    hello, it sounds like the library is damaged.
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 

  • HT2515 My iPad is saying I have a billing account but when I put the credit information in it doesn't work

    Hi,
    My iPad is saying I have a billing account but when I put the credit card information in it doesn't work correctly

    I did a Restore as you suggested and everything is fine.
    Thanks again.

  • When i try and open a tab that is the same as the page im currently on i closes it self. not when i type the full address, but when i use the arrow keys to select the url and press enter

    when I try and open a tab that is the same as the page I'm currently on it closes it self. Not when I type the full address, but when I use the arrow keys to select the url and press enter. I just don't like typing in the same address 5 times, when the older Firefox worked.

    Hi
    AutoPunch enabled? Command click in the bottom half of the Bar Ruler to turn it off
    CCT

  • I am unable to purchase anything because " I do not have the correct privelages".But when I check in properties and the security tab, everything seem to be checked. Also the read only box is checked and when I uncheck it seems ok but it has not unchecked

    I am unable to purchase anything because " I do not have the correct privelages".But when I check in properties and the security tab, everything seems to be checked.
    Also the read only box is checked and when I uncheck it seems ok but if I check again it is still checked.

    Hello,
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

Maybe you are looking for

  • How i can get only required data from table by using CKM

    Hi... i have done one scenerio i.e get required data from one table into another table on basis of some condition by using CKM. Now i want same,but this time my target is file ,not RDBMS. so plz tell me procedure how i can get required data from sour

  • Reinstalling CS5 on new computers.. what do I need to do?

    Hi all, I've got the Production Premium 64bit CS5 Student version, everything installed, registered, and up to date. I'm looking to build a new computer (well, new motherboard, processor, and memory), this means I'll have to reinstall Windows 7 which

  • ERROR:Unreportted Exception java.io.IOEcxeption

    import java.io.*; public class MyFileWriter{      BufferedReader br;      InputStreamReader isr;      PrintWriter pw;      FileWriter fw;      File f;      String data; public MyFileWriter(){      isr=new InputStreamReader(System.in);      br=new Buf

  • Admin console nullpointerexception

    Hi all, Thanks in advance for your help. Just installed j2ee on a Mandrake 10.1 box, appserver8.2 runs, all sample apps run, the command line works, and i can get to the login page for the admin console. After I attempt to login, I"m forwarded to: ht

  • The Case Of The Disappearing Airport Express

    All went well until I tried to update software to my Airport Express (AE). After the update I cannot find my AE no matter what I try. Multiple scans lead to the same end result.....nothing. Prior to the update the AE was discoverable with no problem.