FP-1601 Status LED blinks 17 times but appears to work normally. Cycling power clears the blinking. Any ideas?

This occurred on three different FP-1601s networked together via HUB. The modules seem to work and are recognized via LabView DSC. Trying to determine the cause. Could it be data collissions?

This could be the result of a bad FP refnum. I have seen this a lot. In addition you may check your iak file. sometimes the channel names on the head unit get renamed from channel to input. either the led or switches. GL

Similar Messages

I tried to purchase hotspot shield vpn but it says contact itunes support to complete the transaction, any ideas how to resolve this !

i tried to purchase hotspot shield vpn but it says contact itunes support to complete the transaction, any ideas how to resolve this ! when i try to contact itunes support it just takes me aroudn in circle to a some page which does not resolve my problem.....

You need to contact support. There is no workaround:
http://www.apple.com/support/itunes/

FP-1600 Status LED blinks 17 times.

My FieldPoint bank has 9 modules. I previously had a problem with the FP-TB-10 power and ready lights blinking, but that was because one of my dual-channel modules was not seated correctly. Now the status LED is blinking 17 times. The manual says to contact NI about this. The FieldPoint Explorer seems to find all of the modules correctly, though. Anyone know what's up?

Aaron,
I checked the firmware and the FieldPoint Explorer version, and I'm using 3.20 and 3.0, respectively. When I power cycle the FP-1600, the 17 blinks of the status LED go away. Communication works, and all of the devices are found. However, communication does drop out from time to time, and eventually the status LED begins blinking 17 times again.
A possibly related issue is that the FP-AI-V10 dual-channel module that I have plugged into slot 2 of the FP-TB-10 base causes the FP-TB-10 to flash its power and ready LEDs. Re-seating the FP-AI-V10 seems to fix this, although the module is definitely already clicked into place when I see this problem. Upon reseating (or just pressing on it without removing the module), the FieldPoint Explo
rer program finds this module.
I'm tempted to think that this issue with the FP-TB-10 and FP-AI-V10 are unrelated to the FP-1600's status LED blinking 17 times because even with the FP-TB-10 removed from the bank, I still get the flashing LED.
Any ideas? Also, what is a GPF type error?
Thanks,
Jake

My iPhone 4S will not sync to iTunes. I've download the newest version of iTunes several times but when plugging my phone in it says "The iPhone cannot be used because it requires iTunes version 10.6.3 or later."

My iPhone 4S will not sync to iTunes. I've download the newest version of iTunes several times but when plugging my phone in it says "The iPhone cannot be used because it requires iTunes version 10.6.3 or later." HELP!

If you're using Windows try uninstalling iTunes and all of its components as by following this guide exactly: Windows XP or Windows Vista/7, then reinstall the latest version of iTunes. You must follow this guide exactly or it will not be successful. Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.

I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch. I have done this numerous times, but today I got an error message saying the required file cannot be found. At the same time all of my photos on my iPod vanished. Can anyone help me?

I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch. I have done this numerous times, but today I got an error message saying the required file cannot be found. At the same time all of my photos on my iPod vanished. Can anyone help me?

Try deleting the photo cache from your computer and then re-try the photo sync - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

I recently download a song with my IPOD Touch 4G. The song appears in my iTunes music library but not on my IPOD. I've tried syncing several times, but I cannot get it to transfer to the IPOD. Any suggestions??

I recently download a song with my IPOD Touch 4G. The song appears in my iTunes music library but not on my IPOD. I've tried syncing several times, but I cannot get it to transfer to the IPOD. Any suggestions?? (This has never happened before to me)

Use 3rd party software like:
http://www.digidna.net/products/diskaid
http://www.wideanglesoftware.com/touchcopy/index.php
For items purchased (including apps) from iTunes:
http://support.apple.com/kb/HT1848

Hello, I was trying to purchase an item in a game call 帝王三国! but it does worked first few times, but it isnt working anymore ! It tells me to contact apple store to purchase the item.

Hello, I was trying to purchase an item in a game call 帝王三国! but it does worked first few times, but it isnt working anymore ! It tells me to contact apple store to purchase the item.

Click here and request assistance.
(91679)

So the left side of my iPhone isn't working at all and I even tried turning it off for 5 minutes about 10 million times but nothing is working. Any suggestions on what to do I need help like ASAP!?

So the left side of my iPhone isn't working at all and I even tried turning it off for 5 minutes about 10 million times but nothing is working. Any suggestions on what to do I need help like ASAP!?

Have you performed a reset? Tap and hold the Home button and the On/Off button for approximately 10-15 seconds, until the Apple logo appears. Release both buttons and await restart.

How do I upgrade the iOs on my ipad1 to version5? I've tried through itunes many times, but I get a message that says that the download was interrupted and i should try again later. Can i download the iOS file to my PC and transfer it to the ipad?

How do I upgrade the iOs on my ipad1 to version5? I've tried through itunes many times, but I get a message that says that the download was interrupted and i should try again later. Can i download the iOS file to my PC and transfer it to the ipad? How should I do that?

Thank you!
Disabling firewall and AV did the trick!
Kudos.
Alex

Every time i connect my iphone to itunes and trying to do a backup or get the new update it says i have to restore my iphone. and then that doesnt work, i tried to reinstall itunes but it doesnt work. i get this all the time. fix it please.

Every time i connect my iphone to itunes and trying to do a backup or get the new update it says i have to restore my iphone. and then that doesnt work, i tried to reinstall itunes but it doesnt work. i get this all the time. fix it please.

iTunes states " There's a problem with your Iphone, please contact apple service center " Also i took my iphone to a local service man and he told me the IMEI code has been corrupted and there's nothing that can be done about it. Please help, if you have any solution.
Thank you

HT4236 I've been using the iCloud Photo Stream with my PC for few months already. It work fine every time, but suddenly not work for today

I've been using the iCloud Photo Stream with my PC for few months already. It work fine every time, but suddenly not work for today

Hey lalitgupta,
Thanks for the question. The following article provides troubleshooting steps for Photo Stream:
iCloud: Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
Thanks,
Matt M.

I can't open video file in the page , i download and install flash many time but don't work , i use firefox 5 and windows 7

i can't open video file in the page , i download and install flash many time but don't work , i use Firefox 5 and windows 7

My current version of Chrome is having problems, too! It's so annoying. Anyone have any suggestions now? I basically can't view or download any PDFs because of this.
Does anyone else think this is a problem not only with Adobe? I would think Apple would have something to do with this? Wouldn't they get some idea from the developer versions that no browser can open PDFs while running Lion!? Pretty bad customer service on the part of a company that prides itself on being VERY customer-friendly. Wouldn't you say?

My computer is saying that I am not in the US and so I am unable to view shows, Youtube, etc. I've gone under the location settings and put US several times but nothing has worked. What should I do?

My computer is saying that I am not in the US and so I am unable to view shows, Youtube, etc. I've gone under the location settings and put US several times but nothing has worked. What should I do?

It may not be your computer telling you this, it is probably the company providing the shows to you over the Internet. If that is the case, no setting on your computer can change it because the media company is going by your network address (IP address), which is where your Internet modem (cable or DSL) connects to the outside Internet. If the location of your Internet connection appears to be outside the US (even if it is mistake), media companies that distribute shows under contracts with geographical restrictions may lock you out.
If you use a service like a VPN service, you may have the ability to use IP addresses from other countries so that you can appear to be connecting from there. But it takes some setting up.

HT4528 my podcast app is shutting down after a few seconds iv tried to reinstall several times but nothing is working even after the podcast update last week im still having no luck getting it working any suggestions?

my podcast app is shutting down after a few seconds iv tried to reinstall several times but nothing is working even after the podcast update last week im still having no luck getting it working any suggestions?

if you are subscribed to the Hardwell podcast... quickly open the Podcast app and delete the most recent Hardwell podcast from 3/22.
for some reason that's causing the crash. i've deleted and it works fine again.

I made a keynote then saved it to a flash drive. When I tried to open the keynote on another computer using the flash drive t says, "keynote quit unexpectedly". I have tried multiple times but it never worked. Please help, thanks

I made a keynote then saved it to a flash drive. When I tried to open the keynote on another computer using the flash drive t says, "keynote quit unexpectedly". I have tried multiple times but it never worked. Please help, thanks.

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

FP-1601 Status LED blinks 17 times but appears to work normally. Cycling power clears the blinking. Any ideas?

Similar Messages

Maybe you are looking for