FP-1601 with FP-AI-110 current measurement troubleshooting

Hello,
i really need help here.
i read every thread in this forum about my problem, i still dont know how to
check my FP-1601 Ethernet module.
my application need to measure current from sensor.
but i dont know for sure that my FP-1601 module is work fine.
so i want to check the FP-1601 without connecting sensor to it, is it possible ?
i download the diagnostic program from this website to check
my FP-1601 for series A and B , and the program cannot complete,
i get error on timeout.
Regards,
mor

Hello Mor. Thank you for contacting National Instruments. Is your FP controller showing up in the Measurement and Automation Explorer (MAX) under Remote Systems? Does it find your modules when you right click on the IP address and select Find Devices? If it does, expand Data Neighborhood>>Fieldpoint Items>>your IP address>>your controller. When you hit start are all of your items successful? If they are then everything is working properly.
If your controller is not showing up under Remote Systems or Find Devices timeouts, reset your controller and change the network settings so that MAX suggests values for you. Please let me know if you have any questions. Have a great day!
Marni S.
National Instruments

Similar Messages

  • TestStand DC current measure

    Hi!
    I'm using TestStand 2012 with LabVIEW 2011 for measuring the current in my Sensor Interface module. In the TestStand program's setup part I initialize the DC current measurement channel, and as the VI's output I take the Session and error out. In the Main part in a for loop I measure the DC current, and save the value in an array. In the clean up part I close the DC current channel. I have 1200 iterration step in the for loop and after 2-300 step my computer get crashed, and I have to restart it, I can't do anything, can't move the mouse ... I in the for loop I tried to close and reinitialize the DC current channel after  100 and 200... step and this way it goes to 1183 ot 1200 and crashed.
    I use NI-PXI-4071 DMM, Windows 7 and PXI-1033
    Tomi

    Hi Tamas!
    I tried to reproduce the issue with a similar test sequence that I created, but without any success.
    I ran the main part of the sequence for 10000 steps. During that I had a look on the resource consumption of teststand. I saw that it uses circa 6-7 times more memory, and 20 % of CPU, but for me it did not froze down. 
    I guess you ran out of memory, and because of this your OS freezes. Did you monitor the resource consumption?
    Did you change anything in the settings of the VI call? How complex is your VI?
    Is it possible to tell more about your sequence?
    I have a suggestion, maybe it is worth to try it.
    You wrote, you use a for loop. So if you go to the run options of the VI, you should set the Test recoding option to Disable. Due to this, the results will be evaluated after the 1200 iterations.
    This solution is shown in picture TS_1.png
    Or, you could achieve the same results, with deleting the for loop end enabling the looping in the settings of the called VI. This is shown in the TS_02.png image.
    I suggest you to write an e-mail to [email protected] . If you can, please send the sequence, and I could have a look on it.
    Please let me know, if my solutions helped, or please write to [email protected]
    Best regards,
    Balazs Nagy
    Attachments:
    ts_1.png ‏39 KB
    ts_02.png ‏70 KB

  • Time to make a current measurement

    Hi,
    I am new to the PXI 4132. I am trying to measure current through a device using the PXI 1033 which has a PXI 4132 in it. I would like to know the lowest current that I can measure using this device(as I would be using this to measure leakage in a device) and also how much time would it take to make this lowest current measurement.

    I have never used this device but from the specification sheet it looks like measurement rates are dependent on the aperture time.  With longer aperture times you get less noise.  From Figure 5 and Table 2 it looks like the noise on a current measurement on the 10 uA range with 1 PLC aperture is about 20 pA RMS.  With that setting you can get a maximum of 59.9 or 49.9 readings per second, depending on your power line frequency.
    Lynn

  • Current measurement

    i'm planning to use an e series card to measure current. does anyone know what the minimum current range is that can be accurately measured?

    Next round of questions ))
    What is the period and duty cycle of the pulses?
    The card you have will gather 200KS/sec for one channel. More channels, slower scan.
    The Pulse source, can it handle additional load?
    Many times they are sized with very little "extra current".
    What is the impedance of the electrode?
    You want to have a large enough resistor to be able to read the nAmps, but you don't want the resistor to be the main load of your circuit.
    Welcome to the real world of instrumentation!

  • I have a macbook pro, and am trying to update my software. I recently bought an iphone 5, and my software is to out of date to sync my phone with itunes. I currently am running 10.5.8 and I need to update to atleast 10.6.8. Just wondering if I need to pur

    I have a macbook pro, and am trying to update my software. I recently bought an iphone 5, and my software is to out of date to sync my phone with itunes. I currently am running 10.5.8 and I need to update to atleast 10.6.8. Just wondering if I need to purchase it from apple or if there is an easy/free way to update it.

    you need to purchase it: http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard.  It is only on a disk, not in download form.

  • Friends, MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011)   New MB Pro with OSX 10.6 – current on all updates.  I successfully installed rEFit. I used Boot Camp to install Win 7.  All was great.  Then installed debian 6.  Somehow after the debian i

    MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New with OSX 10.6 – current on all updates.
    I successfully installed rEFit. I used Boot Camp to install Win 7.  All was great.
    Then installed debian 6.  Somehow after the debian install and restart (I know this sounds crazy) but I am now reduced to Win 7 only. rEFit is not present when rebooting nor is OSX or debian. Further, I am unable to force the install DVD to launch when rebooting, by holding C, D or F8.  The Option key brings me to the grey screen with a padlock. I have attempted the root and local pw- no go. Restart holding D takes me to the windows boot manager. I have attempted several options within the Advanced Options; including – Repair Your computer, safe mode and “last known good config,” All of which did nothing.
    I can see all my OSX files within win7. I tried to install the OSX within windows. Ya right, that did nothing..
    I only desire to get back to OSX...
    What are my options??

    Yes, you royally hosed up your machine.
    You should first try to get your files off, any way you can to a external drive.
    Your going to need to hold c and boot from the disk that came with your computer and a couple of screens in under the menu is a option for Disk Utility.
    Select your drive and Erase with Security Option Zero, format the drive HFS+ Journaled and when that's finished (about a hour or so) then quit and install OS X from the installer.
    I hope this works, but I suspect it won't. Others have hosed their machines trying to use a Linux disk without proper partition formatting too.
    Another option might be to use another Mac to c boot off the Snow Leopard disk and install OS X onto a external drive, take that to the problem Mac and try holding option and booting off of it to erase your internal drive.
    You could replace the drive.
    frederick s wrote:
     The Option key brings me to the grey screen with a padlock.
    Is this holding option while booting?
    There was someone else around here who hosed their Mac with a Linux disk too. Try to find it.

  • Follow up material with different base unit of measure

    Hi all,
    I have the BOM with material Mat1 as a component. The base unit of measure of Mat1 is KG.
    Is it possible to replace Mat1 with Mat 2 material in MRP once the Mat1 warehouse stock is depleted.
    The base unit of measure of Mat 2 is KGK.
    The required quantity of MAT1 should be recalculated from KG to KGK accordanly unit ratio.
    Please, expain, where does it maintain?
    Thanks,
    Peter

    Hello Peter,
    You can use follow-up setting (set Mat2 as follow-up of Mat1 in MRP 4 view of material master if this follow-up scenario is valid for all BOM) with discontinuation indicator '1', w/o effective-out date. In this case Mat1's stock will run out (no PldOrd, PR, etc) will be created, and from the date, when Mat1's stock runs out, MRP will calculate with Mat2.
    As I told you, according to my best knowledge, you cannot realize this with different base unit of measures. (you have to change the buom of one of the related material masters or create a new material master if you cannot cope with buom-change).
    Follow-up group scenario can also be used but I guess different buoms will be a problem in that case as well.
    Maybe there are better solution but I'm not aware of it...
    BR
    Csaba

  • The report terminated with error:  REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document.

    Hi,
    I'm getting the below error for reports.
    The report terminated with error:
    REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File test2. cannot be opened. .
    When checked Environment using url 'http://host:port/reports/rwservlet/showenv?server=your_repserver_name"
    found below
    ==================================================
    Reports Servlet Environment Variables 11.1.1.4.0
    Security Mode Non-secure
    HTTP Environment Variables 11.1.1.4.0
    SERVER_NAME   09.14.4.41
    SERVER_PORT   8888
    SCRIPT_NAME   /rwservlet
    SERVER_PROTOCOL   HTTP/1.1
    SERVER_SOFTWARE   undefined
    GATEWAY_INTERFACE   undefined
    SERVER_PORT_SECURE   undefined
    ACCEPT   image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
    REQUEST_METHOD   GET
    REMOTE_HOST   test-wam-app
    REMOTE_ADDR   09.14.4.41
    REMOTE_USER   undefined
    AUTH_TYPE   undefined
    PATH_INFO   showenv
    QUERY_STRING   server=RptSvr_test-wam-app_wamtest
    PATH_TRANSLATED   undefined
    CONTENT_LENGTH   undefined
    CONTENT_TYPE   undefined
    AUTHORIZATION   undefined
    USER-AGENT   Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.2; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729; InfoPath.3; MS-RTC LM 8)
    REMOTE_IDENT   undefined
    REFERER   undefined
    Oracle Reports Services - Servlet Environment Variables  Select to jump to the top of the page  Return to Top
    KeyMapFile   /u03/apptest/FMW_11.1.1/user_projects/domains/WamTest/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/cgicmd.dat
    DBAUTH   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwdbauth.htm
    SYSAUTH   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwsysauth.htm
    server   rep_wls_reports_test-wam-app_wamtest1
    DIAGNOSTIC   yes
    ERRORTEMPLATE   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwerror.htm
    SERVER_IN_PROCESS   yes
    COOKIEEXPIRE   30
    ENCRYPTIONKEY   reports9i
    DIAGHEADTAGS   undefined
    DIAGBODYTAGS   undefined
    HELPURL   undefined
    RELOAD_KEYMAP   undefined
    IMAGEURL   http://09.14.4.41:8888/reports/rwservlet 
    SINGLESIGNON   no
    Oracle Reports Services - Server and Engine Environment Variables  Select to jump to the top of the page  Return to Top
    PATH   /u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/java/jdk1.6.0_23/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
    DISPLAY  
    LD_LIBRARY_PATH   /u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/../lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/opmn/lib:/u01/wamtest/FMW_11.1.1/apphome/lib
    ORACLE_HOME   /u01/wamtest/FMW_11.1.1/apphome
    TNS_ADMIN   /u01/wamtest/FMW_11.1.1/instance1/config
    NLS_LANG   AMERICAN_AMERICA.WE8ISO8859P1
    USER_NLS_LANG  
    RW   /u01/wamtest/FMW_11.1.1/apphome/reports
    REPORTS_PATH   /u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:/u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:
    REPORTS_TMP   /tmp
    REPORTS_TAGLIB_URI   /WEB-INF/lib/reports_tld.jar
    java.class.path   /u01/wamtest/FMW_11.1.1/apphome/reports/jlib/rwrun.jar
    sourceDir  
    tempDir  
    useDataCache  
    ignoreDataParameter
    =========================================================================
    ORACLE_HOME is on mount point u03, checked config.properties but no mention of mount point /u01.
    Dont know from where /u01 came. Could you please help me re configuring the env pointing to /u03.
    Reports server is up though without any issues.
    Regards,
    Djay

    Ensure that the report name is correct. Also ensure that the report exist in REPORTS_PATH environment variable. Otherwise run the report including the reports path.
    E.g.
    report=<reports directory>/test2.rdf

  • Can I delete my icloud back ups with out loosing my current data on my iphone 5

    Hey guys.  I was wondering if I can delete my iCloud backup  with out loosing my current data on my iphone 5?  I can not up date my phone because it says I do not have enough storage available.  Yes, I have purchased more storage space on iCloud. 
    Thank you!

    Yes you could delete backups without loosing anything on your device, but iCloud storage has nothing to do with your local device capacity. I guess that your device is just full and that you have to delete something like apps, movies etc to free up some space for other content.
    iCloud uses its storage only for
    Photos and videos in the Camera Roll
    Device settings (for example: Phone Favorites, Wallpaper, and Mail, Contacts, Calendar accounts)
    App data
    Home screen and app organization
    Messages (iMessage, SMS, and MMS)
    Ringtones
    Visual Voicemails
    purchases of apps, music, videos do not count against your iCloud storage capacity ( but please see also iCloud backup and restore overview http://support.apple.com/kb/ht4859).

  • I have Windows 7 for PC if I view a jpg file I gat the following message - Some of the file types associated with QuickTime applications are currently associated with otherapplications. Should I restore these file type associations to Quicktime. Yes or No

    After viewing a jpg file on my Windows 7 PC I get the following message and I don't know how to answer it "Some of thw file types associated with QuickTime applications are currently associated with other applications. Should I restore these file type associations to QuickTime?" Options are " Yes, No or Do not ask to perform yhis check again. QuickTime Control Panel can be used to make subsequent changes."
    What shoul I do about this message?

    Select no.

  • Trouble with permission to open current PDF from one user to another user. what is the cure. i am running nthe current Server and updated Os 10.9.2

    Trouble with permission to open current PDF from one user to another  What is the cure ? I'm running the latest Server and OS 10.9.2.

    I had the same problem.
    Try this.
    https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

  • HT204347 When I use FaceTime with friends who are currently outside of UK, I cannot make my voice heard after about 20mins' chatting. While this situation will be better if I restart my MBP,but only better in around 20mins.

    When I use FaceTime with friends who are currently outside of UK, I cannot make my voice heard after about 20mins' chatting. While this situation will be better if I restart my MBP,but only better in around 20mins.

    When I use FaceTime with friends who are currently outside of UK, I cannot make my voice heard after about 20mins' chatting. While this situation will be better if I restart my MBP,but only better in around 20mins.

  • Create a CR for multiple processing with me as the current processor

    Hi
    How to create a change request for multiple processing with myself as the current processor.
    I have created a change request for multiple processing and the ystem throws me the error that "There are no suitable change requests"
    Display help shows the below
    For the upload you need a change request that has the status Considered
    and Approved or To Be Revised and ideally has a type that does
    not have the property Object List Is Binding. If the
    change request does have this property, all the entities that are uploaded must
    already be assigned to this object list.
    Please can someoen guide me on how to fix this.
    I found few threads related to this but cudint understand on how to assign a status to CR
    Thanks,
    Sharma

    Hi Prateek,
    Please can anyone give any pointers on how to set the status of change request (for multiple processing):-
    For assigning the statuses to the change request:-
    Go to t code:- MDGIMG->General settings>Process Modeling>Change Request>Edit status of change request.
    the path you mentioned is to create and edit the existing Change request statuses, what I am looking for is when I create a CR for Multi record processing and try to upload a file I get the error "There are no suitable change requests". and when I check the Status of the change request I created I see that the status is Changes to be executed (Set automatically).
    how can i set myself as the processor.
    tcode: MDGIMG->General settings>Process Modeling>Change Request>Create Change request type. Ucheck the single object checkbox and assign your userid for that CR step.
    Single object is already Unchecked  and I am using BRF+ so when I am the processor First approver is say X, I am not sure if we have any place where we can set ourselves as the user. Please let me know if I missed sumting
    Thanks
    Hi Shephalika,
    Yes I am trying to upload a file and Single object is Unchecked in the Change request type.
    Thanks,
    Sharma

  • Skype 6.3.59.582 crashes with Canopus ADVC-110 con...

    Skype 6.3.59.582 crashes with Canopus ADVC-110 connected.
    OS version: 10.7.5
    Model Name: MacBook Pro
    Model Number: A1260
    Model Identifier: MacBookPro4,1
    Processor Name: Intel Core 2 Duo (Penryn)
    Processor Speed: 2.6 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 6 MB
    Memory: 6 GB DDR2 SDRAM 667MHz (1x 2GB ; 1x 4GB)
    Bus Speed: 800 MHz
    Boot ROM Version: MBP41.00C1.B03
    SMC Version (system): 1.27f2

    Please avoid cross-posting.  I replied in the Mac forum.

  • How do I replace 32-bit Firefox 3.6 with a 64-bit "current version"?

    Since my computer is a 64-bit system, I want to replace as much 32-bit software with 64-bit compilations and, as much as I can, abandon executables that can't be replaced.
    Assuming that Mozilla has released a 64-bit compilation of Firefox, how do I identify it and obtain it?
    "Firefox Setup 8.0.1.exe" doesn't tell me whether it installs 32-bit or 64-bit instead. The automagic Firefox Update sometimes wants to replace the 32-bit version 3.6 with a 32-bit "current version" that is not an actual update to 3.6.
    One reason that I have continued running version 3.6 is that there is no compelling reason to replace an installed 32-bit application with some "upgrade" of the same 32-bit application on this computer. In fact, if Mozilla doesn't get off the dime and release a 64-bit compilation which it is willing to maintain, I will make the move the Chrome.

    At this point in development it looks like the earliest that Mozilla will have officially supported 64-bit Firefox releases (for Windows) will be Firefox 12.0.
    There is still a fair bit of work yet to do to get stable win 64-bit Firefox releases. If it was so easy, then there would have been 64-bit builds for Windows as early as Firefox 4.0. It was targeted for Firefox 8.0 originally (at end of June) then probably at 10.0 (mid August) and now they hope to get it done for 12.0.
    https://wiki.mozilla.org/Platform/2011-11-22
    MSVC 2010 Migration (targeting Gecko 12) - khuey
    Builders are ready to go.
    Tests are green.
    Perf numbers look good.
    Client side updater requirements are done.
    This was a big part in the steps to have 64-bit builds on Windows.
    For reading as Bugzilla is not a forum.
    [https://bugzilla.mozilla.org/show_bug.cgi?id=471090 Bug 471090] - (tracking_win64) [meta] Windows x64 build tracking bug
    [https://bugzilla.mozilla.org/show_bug.cgi?id=558448 Bug 558448] - (support-win64) [Tracking bug] officially support Windows 64-bit builds

Maybe you are looking for

  • Macbook problems, hard drive crash, random shutdown, freezes

    I bought my macbook used a few months ago, and it worked flawlessly until about 3 weeks ago. The system started freezing and not booting (getting folder icon instead of apple at startup). I ran drive setup and tried to repair the drive, but this did

  • How to update the table available in BADI method

    Hi Friends, I have to implement one badi ME_REQ_POSTED for purchase requistion, in this badi  I have to read first line item and do some check...if that check is true i need to update subsequent line item (line 20, 30, 40 or so) with purchase group a

  • New details on same page won't insert

    Hi, I am not able to get a master-detail-on-same-page to work properly. It is created with a wizard. After adding the first row and entering data, the row is lost when clicking Apply Changes of the master. The row is not inserted in the database. Whe

  • How can identify the default currency for a customer?

    How can identify the default currency for a customer? I know that this is being determined when you create a sales order for a particular customer, for example, so I could break this process open and find out what it uses. But I thought it worth aski

  • Why can't I set up iMessage or Facetime on my new (second) Ipod Touch 4th Generation?

    It says I have a bad connection or something but on my 1st Ipod Touch I CAN set up imessage and facetime. On my second one I can't. Why is that?