FP-2000 Unconfigured - Is there a way to remove the CP flash card and reload the firmware externally?

I have an FP-2000 Ethernet module that is visible in MAX after a reset (0.0.0.0) as verified by the serial number yet when I try to configure an IP address, subnet, gate, etc. it give me the response 1) Disconnected - Rebooting 2) initializing 3) back to unconfigured. It will not accept an IP, although I have tried many different ways. I have also tried to communicate through serial and it will not recognize it. The status light continuously blinks one blink (reset mode). Has anyone had this problem and is there an external program that may be able to load the firmware on the compact flash card through an external CP flash read/write?
Andrew
WInnipeg,MB.CA

Hey Andrew,
I know we've been working on this issue and I thought I'd post some additional information in case another customer has the same issue as you. It appears as if your FP-2000 got stuck in IP Reset mode. This could be caused by a few things that can only be determined by contacting National Instruments and sending in the unit for an RMA. The RMA will run diagnostic tests to determine the cause of the problem and it will be fixed by our manufacturing team.
Stephanie O.
DIAdem Product Manager
National Instruments

Similar Messages

My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

Hi cindy,
If you all have individual Apple IDs, then you would be able to dowload music from a shared iTunes library on a computer, but you would not be able to sign on each individual ID on an iOS device in order to download music purchased under the original Apple ID without a 90-day waiting period between sign-ons.
Here's what I mean:
If you were to sign on a new Apple ID on, say, an iPhone, and then were to purchase and download some music from iTunes, then you would have to wait 90 days before you could sign on the old Apple ID to that iPhone in order to download previously purchased material (and vice versa).
However, if all of the music purchased by that origjnal Apple ID is in an iTunes library on a shared computer, then you can hook up the device and selectively sync any music in that library to the device. You can also sign on any of the Apple IDs to that shared iTunes library and purchase music to be added to the library.
You would need to authorize the computer for each of the new Apple IDs.
Each of the Apple IDs would also be able to download that music purchased either by syncing to the iTunes library on the computer or by downloading it OTA on the device.
So, each Apple ID can download music, movies, etc. purchased with that Apple ID OTA to the device. Also each Apple ID can sync any music, movies, etc. that are in the iTunes library on the computer regardless of who purchased them.
The only other thing you would need to remember is that if an App needed to be updated, then the original Apple ID that was used to purchase that App would come up, and the password that goes with that Apple ID would be required to do the update.
Hope that helps,
GB

Is there a way to create folders on one iPad and sync the folders to multiple iPads?

Is there a way to create folders on one iPad and sync the folders to multiple iPads? I have 23 iPads and I want to have all the folders match for easier access for students.

Here is a possibkle workaround, assuming the iPads are all starting out with the same initial content on them:
Backup that iPad to each computer you will be using. Then restore from the backup (only takes a couple minutes). Then rename the other 22 iPads.

I had ordered a photo book print two years back. I want to reorder the same book again now. However, I have lost the album project in iphoto. Is there any way to see my print order history and reorder the same book for print ?

I had ordered a photo book print two years back. I want to reorder the same book again now. However, I have lost the album project/photos from iphoto.
Is there any way to see my print order history and reorder the same book for print ?

No. Apple only keeps the pdf file for a book for 30 days. Without the library and book project you won't be able to reorder the same book.
Even though the horse is out of the barn the following tutorial might be of help for future books, i.e. create a new library for each book): iP08 - Archiving an iPhoto Book for Editing and/or Ordering at a Later Date
OT

HT5622 in my phone preventing access to iCloud. Is there a way to remove it? Apple said to wipe the phone out and start over.

My iPhone 5 was set up with an Apple ID I no longer use. Neither Apple nor Hotmail recognize the e-mail address, but it is "hard wired" in my phone preventing access to iCloud. Is there a way to remove the incorrect ID? Neither the genius or Manager at the Apple Store could figure it out. They called Apple and had it escalated, but no luck. After an hour and a half the solution was wipe out the phone and start over.

Hello ymprice91277, let's solve this mystery! To unlink the Facebook contacts go to Settings, Facebook, turn off contacts.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Purchasing a genuine, but used CS3 but the serial number isn't with it. Is there a way to check its not being used and what the serial number is?

I have the opportunity to buy CS3, but there is no serial number with it. Is there a way to find the serial number or get one for the software?

LOL well thank you for that detailed answer to my question.
Guess I'll give it a miss then

Is there a way to communicate with a GPIB device and receive the response?

Does anyone know if there's a function that I can use to issue a command to an instrument such as a query on its status and receive its response. I've tried GPIB Write, but it just writes the command and doesn't receive the automatic response. If I use a GPIB Read right after the GPIB Write, it doesn't work! I think I'm looking for a function that sends the command to the GPIB device and then waits for the response and is capable of outputing it. Thanks for any help!
- Jon

I know what commands to send, I just don't know what function or vi or whatever in LabView to use in order to receive the response right after I send the command. For instance, I want to know what count the counter is currently on, and so I send the command "NN" to the counter, which tells me what count it's currently counting on. I can send the command, I just don't know how to retrieve the information of what count it's on because I don't know how to send a command and receive the response that the counter is prompted to send immediately after. Thanks for the help though!
- Jon

Is there a way to create a table in powerpoint and allow the users to fill in answers?

My beekeeping group wants a table layout question with dates, and the user would have to fill in the numbers after each day.
Date
Answer
June 1
insert drone fram
June 5
Check drone frame for mites
June 9f
Pull frame and freeze it to kill mites

You'll have to create it in Captivate, importing ppt-slides just turns them into movie slides.

HT1338 my old mac cant connect to internet and my migration assistant needs an upgrade is there any way to download to my new mac and install the upgrade on my old one so i can complete the migration process?

I just purchase a new IMac, I am trying to use migration assistant. the problem I am having is my old mac cannot connect to the internet and it needs a software update, can I download the update on my new mac and install it somehow on my old mac?

If it's a free update, search Apple's support site for it and move the dmg as you would any file. If it's a paid upgrade, no; the Mac App Store upgrades, while downloadable, can't be downloaded from a Mac which can't use them.
(78632)

When i go to sycn my ipod, it says that it cannot sync due to a missing file. Is there a way to remove itunes from my computer and redownload it without losing all of my stuff?

Can I remove Itunes from my computer totallty abnd reinstall it without losing my media?

Do a backup of your iTunes library files first to a external hardisk. (ie all your music files)
Go to this Apple download for iTunes 9.2.1,
http://support.apple.com/kb/DL1056
You just need to download and re-install.
If your iTunes is earlier than 9 series, the library folder location need to be changed.
or let me know your iTunes version and I sent you the website
I wouldn't recommend the Latest iTunes 10.5.2, if you are not using iPod Classic 160GB late 2009 version.

I have an older ipod...ever since I updated the itunes software my ipod no longer works in my car. my car is a 2013 mercedes E350. Is there a way to go back to an older version of the itunes software?

I have an older ipod...ever since I updated the itunes software my ipod no longer works in my car. my car is a 2013 mercedes E350. Is there a way to go back to an older version of the itunes software?

If it's an older iPod, its software is not being updated by Apple. So, I don't see how updating iTunes would make the iPod not work with the car's audio system, since iTunes just updates the song files (not how the iPod operates).
Does the iPod work by itself (play songs), when disconnected from the computer and iTunes?

I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?

I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?
Let me explain a little more. I had downloaded a lot of free books in the past as a trial when iBooks was first released and since then I have decided I no longer want them, because of this I hid them from the purchased section of the iBooks store. The 5 books left are ones I decided to keep as seen in the following picture.
This is how it appears in iBooks on my mac. There are 4 books downloaded and 1 book that I have decided not to download at this time. I would still like to keep this book available in the cloud incase I want to download it again in the future. You’ll notice that hide iCloud books is not selected, if I wanted to hide the book that I have chosen to keep in the cloud, but have not downloaded yet I could.
This is exactly how I think this feature should work. If you have hidden a book from your purchases it should not show up in the mac Ibooks app. (I am aware you can never actually delete a purchase, just hide them and that hidden purchases can be restored to your account from within the account management section of the iBooks store).
The iOS app is working differently for me. Here is a picture of the purchased tab on the iBooks store in iOS Ibooks. Again notice that pictures of Lilly is still yet to be downloaded. This is how I expected it to look.
If we visit the front page of iOS iBooks the view is very different from what I expected. Here we can see the 4 books I wanted to keep on my device and have downloaded. We can also see the 1 book I wanted to keep, but did not want to store locally on the device and left in iCloud (Pictures of Lilly). However we can also see all the books I had hidden from the purchased section of my iTunes account and which I believe should no-longer be visible, Dracula, frankenstein etc…
I am aware of the hide iCloud books button within the iOS app, but I did not need to use this to hide the books I had removed from the my purchased section of the iBooks store on the mac, why are they still appearing in iOS?
I’m still not sure if this is a software glitch or not. This article suggests to me that books can be hidden, but I had already completed these steps.
https://support.apple.com/en-us/HT201322
A browse of google also suggests people may have been able to hide past purchases from the front page of iBooks on iOS in the past.
In case there was an issue with syncing I tried logging in and out of my iTunes account via settings in iOS. Force closing the app, disabling automatic downloads and removing my device from iTunes in the cloud. Syncing with iTunes on the mac did not correct the issue either.
Interestingly I have the same issue on my iPhone 6 running iOS 8.3 as I do on my iPad mini suggesting that this might be an issue either with my account or with iOS iBooks software in general.
If there is a way to remove the already hidden iBooks in your account from the front page of iBooks on iOS without using the hide iCloud downloads button? Please help community!

My apologies for the lack of photos, here is my post again with photos.
I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?
Let me explain a little more. I had downloaded a lot of free books in the past as a trial when iBooks was first released and since then I have decided I no longer want them, because of this I hid them from the purchased section of the iBooks store. The 5 books left are ones I decided to keep as seen in the following picture.
This is how it appears in iBooks on my mac. There are 4 books downloaded and 1 book that I have decided not to download at this time. I would still like to keep this book available in the cloud incase I want to download it again in the future. You’ll notice that hide iCloud books is not selected, if I wanted to hide the book that I have chosen to keep in the cloud, but have not downloaded yet I could.
This is exactly how I think this feature should work. If you have hidden a book from your purchases it should not show up in the mac Ibooks app. (I am aware you can never actually delete a purchase, just hide them and that hidden purchases can be restored to your account from within the account management section of the iBooks store).
The iOS app is working differently for me. Here is a picture of the purchased tab on the iBooks store in iOS Ibooks. Again notice that pictures of Lilly is still yet to be downloaded. This is how I expected it to look.
If we visit the front page of iOS iBooks the view is very different from what I expected. Here we can see the 4 books I wanted to keep on my device and have downloaded. We can also see the 1 book I wanted to keep, but did not want to store locally on the device and left in iCloud (Pictures of Lilly). However we can also see all the books I had hidden from the purchased section of my iTunes account and which I believe should no-longer be visible, Dracula, frankenstein etc…
I am aware of the hide iCloud books button within the iOS app, but I did not need to use this to hide the books I had removed from the my purchased section of the iBooks store on the mac, why are they still appearing in iOS?
I’m still not sure if this is a software glitch or not. This article suggests to me that books can be hidden, but I had already completed these steps.
https://support.apple.com/en-us/HT201322
A browse of google also suggests people may have been able to hide past purchases from the front page of iBooks on iOS in the past.
In case there was an issue with syncing I tried logging in and out of my iTunes account via settings in iOS. Force closing the app, disabling automatic downloads and removing my device from iTunes in the cloud. Syncing with iTunes on the mac did not correct the issue either.
Interestingly I have the same issue on my iPhone 6 running iOS 8.3 as I do on my iPad mini suggesting that this might be an issue either with my account or with iOS iBooks software in general.
If there is a way to remove the already hidden iBooks in your account from the front page of iBooks on iOS without using the hide iCloud downloads button? Please help community!
iPhone 6, iOS 8.3, Also an issue on my iPad mini iOS 8

Is there a way to create multiple BQY output to one of the Job File ?

Hello,
I am using EPM11.1.2.3.501 version.
BQY report due to the large amount of data, it is difficult to use a WebClient.
So will share on a quarterly basis.
However,
If modifications are to occur,There are difficulties must modify each file.
For example,
Register 2014 1Q, 2014 2Q, 2014 3Q, 2014 4Q BQY Job file.
When you run the job, the output of the job file is created.
If the job file is changed, you must modify all four files.
This will be only grow ations.
Is there a way to create multiple BQY output to one of the Job File ??
Please help me.
Thanks

It is not possible to have multiple BQY outpu into a job file.
Thanks,
KK

Is there a way to work with two or more app at the same time on iPhone or iPad

Is there a way to work with two or more app at the same time on iPhone or iPad?

What i am attempting to achieve is to work with at least two app at the same time. For example: select any picture from my albums to attach them in an email. Another example is get data from an app to use it with the calc app. And there are more exaples for it. And for sure I need support for an iPad air. I mencioned the other tablet just to try to be a bit clearer.

Is there a way to transfer photos from a point and shoot camera to a flash drive via the iPad?

Is there a way to transfer photos from a point and shoot camera to a flash drive via the iPad?

No.

FP-2000 Unconfigur​ed - Is there a way to remove the CP flash card and reload the firmware externally​?

Similar Messages

Maybe you are looking for

FP-2000 Unconfigured - Is there a way to remove the CP flash card and reload the firmware externally?