FP-AI-111 not giving correct a mA reading on all channels

I have two FP-AI-111 modules connected simultaneously that are reporting a reading of 6.8 mA where the measured value should be 4mA. The communication module used is an FP-1001. Is there a problem with the module?

JKinney,
I responded to the email service you created on this issue, so please see my response there.
Regards,
Devin K
Systems Engineering - RTT & HIL

Similar Messages

FOX CLOCKS not giving correct time. Central time is 2 hours ahead of the actual time

FOX CLOCKS not giving correct time. Central time is 2 hours ahead of the actual time

sorry not an Atomic clock issue I read your post wrong
actually last night I tried to set my clock back to the time without Daylight savings and it would only let me set it to 1 or 3 am but not 2.. I noticed this, but I would wait till Sunday is over and see if this bug is only a one day issue which I have a feeling it may be, wait till 3am march 10th and see if this bug fixes itself I have a feeling it will

My itunes is not downloading correctly even after i uninstalled all software of apple keeps saying the registry is missing to import and burn cds??? it is not on a mac computer

my itunes is not downloading correctly even after i uninstalled all software of apple keeps saying the registry is missing to import and burn cds??? it is not on a mac computer

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

HT201272 To whom it may concern, This morning I purchased an album, on listening to it three of the tracks are not playing correctly. I read on an apple discussion board that I should delete them and re-download them. This did not work as I was asked to p

To whom it may concern, This morning I purchased an album, on listening to it three of the tracks are not playing correctly. I read on an apple discussion board that I should delete them and re-download them. This did not work as I was asked to pay for them, and one of the tracks was an album only track.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Drill Down are not giving correct values

Hi
We created sales Order values as a character and putting them in Rows and populating data by writing update rule. We created variables on calendar month in order to choose specific period of data in the query. For example if we need 02/2008 to 0/42008 which gives two months of data. When I drill down on Sales Order or billing document on the report its not giving variable interval data instead its pulling all the sales orders and billing documents in the Cube. With out drilling down the values are showing OK. If I restrict with same period in the cube it's giving correct values
Please let us know if you have any ideas.
Thanks
Naga

Aah, I guessed it correctly!
Remove the local var of the Stop button & place the terminal itself inside the inner while loop & directly wire it to the conditional terminal of the outer while loop.
Please see the attached pic...
Message Edited by parthabe on 07-30-2009 07:12 AM
- Partha
LabVIEW - Wires that catch bugs!
Attachments:
arrayreq_mod.jpg ‏97 KB
arrayreq_mod.jpg ‏97 KB
arrayreq_mod.jpg ‏99 KB

Stock Ledger Report in Day Wise not giving correct values for Opening Stock

Dear Experts,
I m working on Sock ledger report to give the day wise data.
since yesterdays closing Stock will become opening stock of today,
To get Opening Stock,
I have restricted the stock key figure with 2 variables on calday
                              (DATE FROM var with <=(Lessthan or equal to) and offset -1
                               DATE TO      var with <=(Lessthan or equal to) and offset -1)
To get Closing Stock,
I have restricted the Stock key figure with 2 variables on calday
                              (DATE FROM var with <=(Lessthan or equal to)
                               DATE TO      var with <=(Lessthan or equal to) )
But in the output Opening stock values are not coming correctly and for given range of dates,
for last date, opening stock is showing as Zero.
Could you please tell me how can I achieve the correct values for opening stock.
Thanks in advance.

Hi Arjun,
Seems like you are making it more complicated. What is your selection screen criteria?
Ideally you should only use the offset.
You will have say Calday in rows and stock in Column
____________Opening Stock_____________Closing Stock
01/06/2009___(Closing stock of 31/05/2009)_(Stock of 01/06/2009)
02/06/2009___(Closing stock of 01/06/2009)_(Stock of 02/06/2009)
03/06/2009___(Closing stock of 02/06/2009)_(Stock of 03/06/2009)
So, from above scenario, create one RKFs and include Calday in it. Create a replacement path variable on calday and apply the offset as -1.
So, your Opening Stock will be calculated by closign stock of previous day.
- Danny

Adobe Acrobat Pro application is not giving correct scale to drawings

When using Adobe Acrobat 8 Standard I have issues when trying to scale off PDF’s that I receive from Architects. When using the distance, area, or perimeter tool it will not scale correctly even after I change the scale in the tool box. I’ve tried to change the scale to different setting and the same measurements will be produced regardless of what scale I set it to.
Example: ¼” inch per 1’ foot will scale will produce the same distance as ½” inch per 1’ foot.

Hi emcfrazier7,
This might be a bug with Acrobat 8 version, however I cannot verify this.
With the latest version Acrobat 11, I do not see this problem occurring.
So you might want to purchase the latest version.
Regards,
Rave

PO query not giving correct values

Hi
I am running the following query in PL?SQL Developer
SELECT hou.name Operating_unit,
       pha.segment1 po_number,
       pha.revision_num,
       ap.vendor_name,
       hla1.location_code,
       papf.full_name Buyer,
       to_char(pha.creation_date, 'DD-MON-RRRR HH24:MI:SS') creation_date,
       pdta.type_name,
       assa.vendor_site_code,
       hla2.location_code,
       initcap(pha.authorization_status) po_status,
       pha.currency_code,
       pla.line_num,
       pltt.line_type,
       msib.segment1 item,
       (mcb.segment1 || '.' || mcb.segment1) category,
       msib.description,
       msib.primary_unit_of_measure UOM,
       pla.quantity,
       pla.unit_price,
       (pla.quantity * pla.unit_price) amount,
       (gcc.segment1 || '-' || gcc.segment2 || '-' || gcc.segment3 || '-' ||
       gcc.segment4 || '-' || gcc.segment5) charge_account,
       pla.list_price_per_unit,
       at.name,
       pha.freight_terms_lookup_code,
       pha.fob_lookup_code,
       initcap(pha.pay_on_code) pay_on_code,
       pha.acceptance_required_flag,
       ood.organization_code,
       ood.organization_name,
       msib.primary_unit_of_measure UOM,
       pla.quantity,
       plla.country_of_origin_code,
       (gcc.segment1 || '-' || gcc.segment2 || '-' || gcc.segment3 || '-' ||
       gcc.segment4 || '-' || gcc.segment5) charge_account,
       (pla.quantity * pla.unit_price) amount,
       plla.receive_close_tolerance,
       plla.invoice_close_tolerance,
       plla.quantity,
       plla.quantity_received,
       plla.quantity_cancelled,
       plla.quantity_billed,
       plla.match_option,
       plla.accrue_on_receipt_flag,
       plla.enforce_ship_to_location_code,
       plla.days_early_receipt_allowed,
       plla.days_late_receipt_allowed,
       plla.receipt_days_exception_code,
       plla.qty_rcv_tolerance,
       initcap(plla.qty_rcv_exception_code),
       plla.allow_substitute_receipts_flag,
       plla.receiving_routing_id,
       plla.enforce_ship_to_location_code,
       initcap(pda.destination_type_code),
       papf.full_name requestor,
       hla3.location_code,
       --pda.quantity_ordered, -- commented because giving wrong value
       (select quantity_ordered
          from po_distributions_all
         where po_header_id IN (select po_header_id
                                  from po_headers_all
                                 where segment1 = pha.segment1)) quantity_ordered, -- Added
       (gcc.segment1 || '-' || gcc.segment2 || '-' || gcc.segment3 || '-' ||
       gcc.segment4 || '-' || gcc.segment5) po_charge_account,
       haou.name,
       prha.segment1,
       prla.line_num,
       to_char(prla.rate_date, 'DD-MON-RRRR') rate_date,
       (gcc.segment1 || '-' || gcc.segment2 || '-' || gcc.segment3 || '-' ||
       gcc.segment4 || '-' || gcc.segment5) po_charge_account,
       (SELECT acc.segment1 || '-' || acc.segment2 || '-' || acc.segment3 || '-' ||
               acc.segment4 || '-' || acc.segment5
          FROM gl_code_combinations acc
         WHERE acc.code_combination_id = pda.accrual_account_id) accrual_account,
       (SELECT acc.segment1 || '-' || acc.segment2 || '-' || acc.segment3 || '-' ||
               acc.segment4 || '-' || acc.segment5
          FROM gl_code_combinations acc
         WHERE acc.code_combination_id = pda.variance_account_id) variance_account,
       pla.line_num,
       plla.shipment_num,
       ood.organization_code,
       ood.organization_name,
       msib.segment1,
       msib.description,
       pla.quantity
FROM hr_operating_units           hou,
       po_headers_all               pha,
       ap_suppliers                 ap,
       hr_locations_all             hla1,
       per_all_people_f             papf,
       po_document_types_all        pdta,
       po_document_types_all_b      pdtab,
       ap_supplier_sites_all        assa,
       hr_locations_all             hla2,
       po_lines_all                 pla,
       po_line_types_b              pltb,
       po_line_types_tl             pltt,
       mtl_system_items_b           msib,
       po_line_locations_all        plla,
       mtl_categories_b             mcb,
       po_distributions_all         pda,
       gl_code_combinations         gcc,
       ap_terms                     at,
       org_organization_definitions ood,
       hr_locations_all             hla3,
       po_requisition_headers_all   prha,
       po_req_distributions_all     prda,
       po_requisition_lines_all     prla,
       hr_all_organization_units_tl haou
WHERE 1 = 1
   AND pha.segment1 = '6395'        --&po_number
   AND hou.organization_id = 204    --&operating_unit
   AND hou.organization_id = pha.org_id
   AND pha.vendor_id = ap.vendor_id
   AND hla1.location_id = pha.ship_to_location_id
   AND papf.person_id = pha.agent_id
   AND SYSDATE BETWEEN papf.effective_start_date AND papf.effective_end_date
   AND ((pdtab.document_type_code IN ('PO', 'PA') AND
       pdtab.document_subtype = pha.type_lookup_code))
   AND pdta.document_subtype = pdtab.document_subtype
   AND pdta.document_type_code = pdtab.document_type_code
   AND pdta.org_id = Pdtab.org_id
   AND pha.org_id = pdta.org_id
   AND ap.vendor_id = assa.vendor_id
   AND pha.org_id = assa.org_id
   AND pha.vendor_id = assa.vendor_id
   AND pha.vendor_site_id = assa.vendor_site_id
   AND pha.bill_to_location_id = hla2.ship_to_location_id
   AND pla.po_header_id = pha.po_header_id
   AND pltb.line_type_id = pla.line_type_id
   AND pla.line_type_id = pltt.line_type_id
   AND pltt.language = USERENV('LANG')
   AND msib.inventory_item_id = pla.item_id
   AND plla.po_line_id = pla.po_line_id
   AND msib.organization_id = plla.ship_to_organization_id
   AND mcb.category_id = pla.category_id
   AND pda.po_line_id = pla.po_line_id
   AND pda.po_header_id = pha.po_header_id
   AND pda.code_combination_id = gcc.code_combination_id
   AND at.term_id = pha.terms_id
   AND ood.organization_id = plla.ship_to_organization_id
   AND pda.deliver_to_person_id = papf.person_id
   AND hla3.location_id = pda.deliver_to_location_id
   AND haou.organization_id = prha.org_id
   AND haou.language = USERENV('LANG')
   AND prha.org_id = pha.org_id
   AND prha.requisition_header_id = prla.requisition_header_id
   AND pda.req_distribution_id = prda.distribution_id
   AND prda.requisition_line_id = prla.requisition_line_id
   AND haou.organization_id = hou.organization_id
   AND prla.org_id = pha.org_id
   AND prda.code_combination_id = gcc.code_combination_id    --added
   AND hla3.inventory_organization_id = msib.organization_id   --added
   AND pda.line_location_id = prla.line_location_id --added
   AND plla.po_header_id = pha.po_header_id --added
I tested it for 10 POs. for 2 the query is giving right value. but for others it is giving wrong value.
Mainly the PO Charge Account, accrual and variance account values are not matching. What changes I can make to get the correct data?
I am using r12 version
Thanks

Hi Srini,
Thanks for replying. I check and the application context is set.
I think we might be missing certain conditions. Can you help me with that.

AR13 report not giving correct depreciation forcast

Hi SAP Gurus,
I am having problem with an asset. The asset remaining useful life calculation as shown in the parameter tab of asset explorer is not matching with the AR13 report forecast. In AR13 it is getting fully depreciated long before the remaining useful life shown in asset explorer. So i am not sure if AR13 is giving the correct forecast. Can someone please explain what exactly does ar13 shows us and why is there a mismatch between the remaining useful life of the asset as shown in asset explorer and the ar13 report.................any help would be much appreciated......

Hi,
Did you compare with AR03...?

% Change is not giving correct results.

Hi,
I am using Ago Function to calculate Current month cx count , previous month cx count, present month acct count, previous month acct count and in the report parameter selecting Reporting Month as DEC 09. The results are coming perfectly fine... but when I create % Change Previous Month Cx count and % change Previous month Account count, It is not showing the correct results and getting only 0% listed even if the Difference is huge and should be around 10% ...
The code written to calculate % change is :
CASE WHEN ("EIP BDW Analytics"."EIP Reporting FACT"."Previous Month Account Count" IS NULL OR "EIP BDW Analytics"."EIP Reporting FACT"."Previous Month Account Count" = 0) AND NOT "EIP BDW Analytics"."EIP Reporting FACT"."Current Month Account Count" IS NULL AND "EIP BDW Analytics"."EIP Reporting FACT"."Current Month Account Count" <> 0 THEN 100.0 WHEN ("EIP BDW Analytics"."EIP Reporting FACT"."Previous Month Account Count" IS NULL OR "EIP BDW Analytics"."EIP Reporting FACT"."Previous Month Account Count" = 0) AND ("EIP BDW Analytics"."EIP Reporting FACT"."Current Month Account Count" IS NULL OR "EIP BDW Analytics"."EIP Reporting FACT"."Current Month Account Count" = 0) THEN 0.0 WHEN "EIP BDW Analytics"."EIP Reporting FACT"."Current Month Account Count" IS NULL AND NOT "EIP BDW Analytics"."EIP Reporting FACT"."Previous Month Account Count" IS NULL AND "EIP BDW Analytics"."EIP Reporting FACT"."Previous Month Account Count" <> 0 THEN -(100.0) ELSE 100.0 * ("EIP BDW Analytics"."EIP Reporting FACT"."Current Month Account Count" - "EIP BDW Analytics"."EIP Reporting FACT"."Previous Month Account Count") / "EIP BDW Analytics"."EIP Reporting FACT"."Previous Month Account Count" END
Can some one tell me what I need to do in order to get the desired results.
I am using a time dimension with the following hierarchy ( Year - Month - Period_ID) joined with the Reporting Table Fact which has count of cx and Count of Accts.

We have two assets one acquired on 01/04/2014 and another on 26/04/2014. Everything else is same for both assets like asset class , keys etc.
Now here are two calculations.
System is giving calculation ok , what should we do so that for both assets we are left with same scrap value (1047) (and not 1119.68 as in last line )
Can anyone help how to get value in last field of screen shot given below asset vale date or it is always blank.
wanted to add something in our case DEP to the DAY is also ticked in dep key.
regards
Sanjeev Mehndiratta

Outer Join not giving correct result

I have two tables=> tab_child_tmp (product_id,region,child_val,mst_product) and
tab_master_tmp (master_product_id,region,master_val)
tab_child_tmp.mst_product is the foreign key referencing tab_master_tmp.master_product_id.
Currently the tables are populated with below values
tab_child_tmp
PRODUCT_ID REGION CHILD_VAL MST_PRODUCT
Arm-01,     CAL,     100,     Arm-Master
Arm-01,     DEL,     222,     Arm-Master
Arm-01,     CHEN,     55,     Arm-Master
Arm-02,     MUM,     69,     Arm-Master
Arm-02,     DEL,     90,     Arm-Master
tab_master_tmp
MST_PRODUCT     REGION     MASTER_VAL
Arm-Master     , CAL,     390
Arm-Master     , DEL,     300
Arm-Master, CHEN,     450
Arm-Master, MUM,     600
Now I want to display the result in the below format
PRODUCT_ID REGION CHILD_VAL MASTER_VAL
1. Arm-01     , CAL, 100,     390
2. Arm-01     , DEL, 222,     300
3. Arm-01     , CHEN, 55,     450
4. Arm-01     , MUM, 0,     600
5. Arm-02     , MUM, 69,     600
6. Arm-02     , DEL, 90,     300
7. Arm-02     , CHEN, 0,     450
8. Arm-02     , CAL, 0,     390
When I am running the below query it is not returning the above 4,7 and 8 rows. Can you please provide the correct sql to get the above desired output
SELECT
a.product_id,
nvl(a.region,b.region) geo,
nvl(a.child_val,0)match_val,
b.master_val
FROM
tab_child_tmp a,
tab_master_tmp b
WHERE
a.mst_product(+) = b.master_product AND
a.region(+) = b.region
Thanks

Hi
Thanks for the reply. Please find below the details.
Oracle Version*
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
CORE     10.2.0.1.0     Production
TNS for Solaris: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Create Table Script_
create table TAB_CHILD_TMP
PRODUCT_ID VARCHAR2(50),
REGION VARCHAR2(100),
CHILD_VAL NUMBER,
MST_PRODUCT VARCHAR2(50)
create table TAB_MASTER_TMP
MST_PRODUCT VARCHAR2(50),
REGION VARCHAR2(100),
MASTER_VAL NUMBER
Insert Script_
INSERT INTO tab_child_tmp VALUES ('Arm-01','CAL',100,'Arm-Master');
INSERT INTO tab_child_tmp VALUES ('Arm-01','DEL',222,'Arm-Master');
INSERT INTO tab_child_tmp VALUES ('Arm-01','CHEN',55,'Arm-Master');
INSERT INTO tab_child_tmp VALUES ('Arm-Master','MUM',69,'PLC1');
INSERT INTO tab_child_tmp VALUES ('Arm-Master','DEL',90,'PLC1');
INSERT INTO tab_master_tmp VALUES ('Arm-Master','CAL',390);
INSERT INTO tab_master_tmp VALUES ('Arm-Master','DEL',300);
INSERT INTO tab_master_tmp VALUES ('Arm-Master','CHEN',450);
INSERT INTO tab_master_tmp VALUES ('Arm-Master','MUM',600);
INSERT INTO tab_master_tmp VALUES ('PLC1','MUM',199);
INSERT INTO tab_master_tmp VALUES ('PLC1','DEL',299);
INSERT INTO tab_master_tmp VALUES ('PLC1','CHEN',399);
Expected output logic*
Need to display the product value for each region along with the value of master product for the corresponding product and region. If a product doesn't belong to a particular region, but the corresponding master product is, then that value also needs to be displayed for that product and region with child value as zero.
ie. for product Arm-01 there is no record in tab_child_tmp for region "MUM", but it's master product 'Arm-Master' has a record for region 'MUM' in tab master_tmp table. So in ouput there will be a record for product 'Arm-01' and region-'MUM' with child value as 0 and master value as 600.
Expected Output*
PRODUCT_ID ~~~ REG ~~~ CHILD_VAL ~~~ MASTER_VAL
Arm-01 ~~~ CAL ~~~ 100 ~~~ 390
Arm-01 ~~~ DEL ~~~ 222 ~~~ 300
Arm-01 ~~~ CHEN ~~~ 55 ~~~ 450
Arm-01 ~~~ MUM ~~~ 0 ~~~ 600
Arm-MASTER ~~~ MUM ~~~ 69 ~~~ 199
Arm-MASTER ~~~ DEL ~~~ 90 ~~~ 299
Arm-MASTER ~~~ CHEN ~~~ 0 ~~~ 399
Please help

&SAPSCRIPT-FORMPAGES& not giving correct number

Hi,
Iam unable to print total number of pages correctly.
Please kindly help me.
I am getting total pages 4 but need to display 3(exclude terms&conditions page) at page 1 of 3 like that.
I tried to decrement page counter by 1 in the below perform, it's working fine but the issue is ....
First time when perform is called system is passing 2 at &SAPSCRIPT-FORMPAGES&, next time getting 3 into &SAPSCRIPT-FORMPAGES&.
PERFORM CHECK_PAGE IN PROGRAM ZZ_RFQ USING &SAPSCRIPT-FORMPAGES&
CHANGING &WS_PAGE&
ENDPERFORM
Page &PAGE(C)& of &WS_PAGE&
Thanks,
Geetha.

Thanks for the reply Max. Let me explain more on the issue.
I created a custom field on RFQ for terms & conditions. On th form I have to print terms & conditions on the back of first page when the custom field is checked.
When I check the custom field on RFQ everything is working fine including page numbers.
When the cusotm field is not checked system is caliculating terms and confitions also as a page (In spool I see blank page) but not printing as it is back of the first page. Client is ok with it. but the prob is with page numbers getting 1 of 4, 2 o 4, 3 of 4.
So I tried to call this perform when the field is not checked to reduce the page number. as you said SAPSCRIPT-FORMPAGES is calculated at runtime not able to get right values.
Any alternative to get right value?
Thanks,
Geetha.

.bat file result not giving correctly in data services

Hi ,
I am using .bat file to count the number of files in the folder. I want to capture the value of the number of files.
I have written small .bat file as shown below
@echo off
setlocal enableextensions
CD %1
set cnt=0
for %%A in (*) do set /a cnt+=1
echo File count = %cnt%
endlocal
I have used this batch file in the script as shown below.
$COUNT =exec('D:\\test.bat', 'D:\\docs',8);
print($COUNT);
In the above $COUNT is varchar(255).
actually i have only 11 file sin the docs folder . But it is giving the 442 files.
If I run the same batch file in the windows cmd command I am getting the correct result.
Please let me know what will be issues?
I am unable figure out the issues for weird result when I am using DS.
Please help me in this issue.
Thanks & Regards,
Ramana.

Hi,
While executing the batch file it is taking the Data services installation directory path as shown below.
14504 6420 PRINTFN 3/30/2015 9:40:10 AM 0: C:\Program Files (x86)\SAP BusinessObjects\Data Services\bin File count = 442
I have changed the the batch file with two parameters. one for changing directory and another one for changing the folder.
Now my batch file looks like this.
@echo off
setlocal enableextensions
%1:
CD %2
echo %CD%
set cnt=0
for %%A in (*) do set /a cnt+=1
echo File count = %cnt%
endlocal
Then my script is like this .
$COUNT =exec('D:\\test.bat', ' D D:\\docs',8);
print($COUNT);
Now it is giving the expected result as shown below.
14700 13912 PRINTFN 3/30/2015 9:52:18 AM 0: D:\Docs File count = 11
Thanks & Regards,
Ramana.

Nokia N73 is not giving correct size of the folder.

Hi,
I am using FileConnection API in my code and when i try to retrieve the size of the Folder then it gives me the wrong size. It gives me the size = 430KB but there are only 2 png images in that folder which are of size 10K and 19K.
What i have done is :: I have created the folder and created multiple image through the application. And after sometime i have deleted some images from that folder through the application. And when next time when i was trying to get the size of that folder then it gives me the size = 430KB rather than the updated size.
After that i viewed the details of that folder through FileSystem. At that it also shows me the same size = 430 KB. It restarted the phone and then viewed the size but it was same.
I have deleted and created the file using create() and delete() of FileConnection API.
For creation of file::
                 fileConn.create();
                  OutputStream os = fileConn.openOutputStream();
                  os.write(data, 0, data.length);
                  os.close();
For Deletion::
            fileConn = (FileConnection) Connector.open(url);
               fileConn.delete();
               fileConn.close();There are no hidden files in that folder.
Can anyone please tell me what will be the problem? Is this a phone issue or something i have missed?
Thanx
Adeesh Jain

20-Dec-2008 07:57 PM
hotbikerboy wrote:
hi have Nokia N73 ME (music edition) since 3 months it dont have any problem yet but today from morning to evening i turning on the phone and put it into my pocket but after some time when i put back it was turning off. it happend 3 or 4 time today but in the evening i have played a game on mobile and also mobile on charging during game played my bettary if full.
After played the game i put it at the top of the higher cupboard and after sometime when i put back phone it was off and after it i tried many times but it not turning on battery is all right i have check it .
Now tell me what can i do to put it on? plz help me.

I make enable 4G in settings but showing 3G in display ? .same location have 4G .I was called service provider they are not giving corrective answer .UAE etisalat

Pls help

Yes that is the map but the area that is 4G is North-West Salt Lake. Some of downtown is 4G (I guess 4G and extended 4G is that extended is or can be sometimes 4G and sometimes 3G.) I never doubted that Salt Lake had some 4G. I was trying to tell you that the Verizon agent told me that Salt Lake city will not have 4G until the end of 2011. she gave me the URL to an article that validates that. the other map which another agent used is just red and white. She said go by this map since it is more accurate as of now and the one with the various reds is toward the end of 2011. whatever the story is, I have no idea but if you look at the map that you are questioning if I refreshed the map aft checking 4G you will see that most of downtown Salt Lake is not the burgundy red and south of downtown has no 4G at al, just 4G extended and 3G. If you want to check the area where I live it is near 3900 South or on the section of the map you are showing in your post, it is South of 215 and 80 frwys. this area on the map I used this morning is all 4G extended and 3G. I have no idea why the only pure 4G is near the Great Salt Lake, but that area is out where the airport is (west of downtown Salt Lake). Have you looked at the other map that is just red and white? I am not sure of the difference but the agent told me that map is the most current map if you want something that is current.
I am confused. But I am still confused as to why you were wondering if I was refreshing the map? I was telling or describing in my post what the agents at Verizon had told me, not what I had seen on the multi colored map.
thanks,

FP-AI-111 not giving correct a mA reading on all channels

Similar Messages

Maybe you are looking for