FP.Get Image not working on a subVI if it has a picture control

Download the attached (7.0).
Open and save BOTH VIs in your own version. This is important, because it looks like if the VI is recompiled its FP is loaded into memory and the bug is not apparent.
Run the VI. The indicators in the subVI are not updated the first time you run the VI.
This happens in 8.6 as well and requires the subVI to have a picture control and to have its FP closed.
One workaround is to use the first call? primitive and call the Open FP method (with the state set to hidden) when the VI starts running.
Try to take over the world!
Attachments:
SubVI FP not updating.llb ‏30 KB

Hey Tst,
Thank you for the feedback.
I tried the vi's you have attached here and it updated the first time I ran the Caller.vi.
I must be doing something different from you.
Aashish M
Applications Engineer
National Instruments
http://www.ni.com/support/

Similar Messages

Iphoto 9.2.1 leopard scrapbook theme not working correctly. THe opening slide has 2 pictures; the bottom one can barely be seen and probably shouldn't be there. It works fine in LION "only 1 image" on opening slide.

Hi.
iphoto 9.2.1 on iMac Leopard "scrapbook theme" not working correctly.
The opening slide has 2 pictures; the bottom one can barely be seen and probably shouldn't be there.
It works fine in LION "only 1 image" on opening slide.
All updated. Any suggestions
Thanks in Advance

Hi.
iphoto 9.2.1 on iMac Leopard "scrapbook theme" not working correctly.
The opening slide has 2 pictures; the bottom one can barely be seen and probably shouldn't be there.
It works fine in LION "only 1 image" on opening slide.
All updated. Any suggestions
Thanks in Advance

Get Images Not Working - 9300

Hi all,
I am having a issue with my blackberry actually it is not downloading inline images in any message despite that I've turned that on in the email-settings. And also tried doing a reboot. I have also tried it manually that is from the options menu. Please help.
I have BIS.
Thanks for any help.
Regards,
Raghav Singhal

is this happening to all email you receive (even mails received from different domains)??
Try doing an HRT (host routing table)
KB00510 - How to register a BlackBerry smartphone with the wireless network
also read below KB
KB15969 - HTML email messages do not display images when received on the BlackBerry smartphone
.RoCkInG dUdE.
Trust Your Technolust | Do not PM for any support
If a solution received, please hit on to show your support.

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

The warranty says that Apple may restrict service of an iPhone to the country of sale, and any reliable salesperson will tell you that if you tell them that you plan to use the iPhone in another country. Such service restrictions are common with cellphones and are by no means limited to Apple's phones.
Sorry, but if your iPhone requires service, you will need to send it to someone you know in the US who can get it serviced and then send it back to you.
Regards.

Keep getting "itunes not working" when trying to sync my music to my iphone4

keep getting "itunes not working" when trying to sync my music to my iphone4

Just a basic gateway computer from futureshop(bestbuy) I get that message about half way through the sync then it closes iTunes?

Macbook pro is not working with Canon pixma iP1500, but has previously. The printer works with an old PC without trouble. "printer is offline" message when this printer is plugged into macbook. Any clues to get it to work?

Macbook pro is not working with Canon pixma iP1500 but has previously. Printer works with an old PC but macbook shows "printer is offline". Any clues?

Hello Betty7,
Please let me take a moment to say "Welcome" to the HP Forums.
I hope you enjoy your experience!
I see that you are having an issue with getting the printer reinstalled.
I suggest that we start off by running the HP Print and Scan Doctor. If the Doctor fails, please let me know where it fails as well as any error codes it may generate.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Why can't I get into photoshop or elements 10? I just get a not working message

why can't I get into photoshop or elements 10. I just get a not working message

I have the same problem, I sent my submission when 4.9 came out. No way to get in the direcotry, I am also listed anywhere else.
I have a jazz podcast which is member of Association of Music Podcasting. It's podsafe and I have a growing number of listeners. Please Apple do something.
my feed:
http://feeds.feedburner.com/NightPassagePodcast
Renato
The Night Passage Podcast
http://nightpassage.blogspot.com
http://nightpassage.org

RH 8 Shed images not working

1. Shed images not working as of Nov. 12 2009

Hi all
Thanks for all the info - but I'm still stumped. I have tried generating my .chm
files to the default SSL folders, manually copying all the child chms to the SSL
folder for the master project, letting RH copy them, generating all chms to an
external folder... no matter what I do, every time I recompile the master
project it picks up random old stuff. I have checked and rechecked that my
merged TOC items are to the latest child chms...
Sometimes when I recomplie the master project, even the content in that reverts
back to a previous version, sometimes it doesn't...
I have looked at the Merged Files list in the hhp file, I have deleted this file
and started my merge from scratch, I have manually deleted some paths (some
paths are to directories on the server where any files for this project have
long since been deleted...) directly in this file, but again every time I
recompile the master project it picks up random old versions of the child chms (
and the huge list of old merged files are put back in the hhp file. Even when I
delete all chms from all locations in the folder I'm working in on my C drive,
delete all the merged TOC items from the master project, save it, and
recompile it, the list of old merged files reappears in the hhp file).
Any more thoughts gratefully received:-)
Also - I don't have a Baggage Files folder??
One more thing... If I delete ALL the files under Merged Files in the hhp file using HTML Help Workshop, it crashes

Good evening, after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searc

Good evening,
after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures. Therefore, I would like to use 9.5 just by by clicking on the icon down my finder and not by being obliged to open my hard drive.
Would you please tell me what I should do. Thank you.
Best regards,
Robert

Huh?
As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures.
So, you have restored 9.4.3 from Time Machine but can see all your pictures in 9.5?
Do you have two version of iPhoto on your Machine?
And if you didn't update the Library, ("as it did not work out,") how can you see things in 9.5?
So, whatever set up you have is confusing.

When trying to buy a song a message tells me the Credit card feature is not working at this time but this has been going on for 4 days now. How can I fix this?

When trying to buy a song a message tells me the Credit card feature is not working at this time but this has been going on for 4 days now. How can I fix this?

turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them

Why is code to get center of image not working?

Hey there. I have am trying to establish the center of the imags that load so that I can put them in the center of the stage. I am doing this as each image is a different size.
Here is the code i have gotten to work before but its not working now and I have been searching to find what I have done wrong with no luck. : (
Would you look it over and maybe you will see what I am doing wrong?
public function placePicture(e:Event = null):void {
     rawImage = imageData.image[imgNum].imageURL;
     lastImageIndex = imageData.*.length() - 1;
     imageLoader = new Loader;
     imageHolder = new Sprite;
     imageLoader.load(new URLRequest(rawImage));
     imageLoader.x -= imageLoader.width/2; //this should set the image to the center no?
     imageLoader.y -= imageLoader.height/2;
     imageHolder.x = 640; //this is the center of the stage
     imageHolder.y = 100;
     imageHolder.addChild(imageLoader);
     masterHolder.addChild(imageHolder);
The result when I publish is the picture comes on stage but the top left corner goes to 640 instead of the center of the image going to 640.
I tried several variations of this all with the same result:
imageLoader.x = -1*imageLoader.width/2;
I tried using setRegistrationPoint with the following tutorial: http://flashscript.ca/set-registration-as3.php
and I tried doing all of the above by inserting the loader into a sprite and then applying the code to the sprite and then adding that sprite to another sprite and putting that at 640 and not inserting it in another sprite and trying to straight up put the existing sprite at 640 (hopefully that all makes sense). And I have tried to put it to width/3 and nothing different happens.
If you have any other ideas or can see what I am doing wrong I would really be gratefull for some tips! : )
Thanks for any help!
oh, and I am getting no errors on this.

the image's width and height are not available until loading is complete. ie, use a complete listener/listener function.

Google Images not working in Safari on Iphone

Since a while back the "images"-tab in google does'nt work on the iPhone in any of the browsers I've tried. I've searched the net to find others with the same problem but with little luck. Here's a description of the problem.
For example I search for "dog" in google in the Safari browser, this works just fine.
Then I press the "images"-tab and get a thumbnail view with pictures of dogs, of course.
But this is where it all goes wrong, when touching one of the images I get an enlarged view of an image next to it. The "back to the results" and "full image" buttons dim out (without being touchable) and swiping does not work. I don't know what has caused this to stop working properly, I know its not the new iOS version though.
HERE is a youtube video I prepared that explains the problem.
First, is there anyone else out there with this problem?
Second, this is what I've tried:
- Other iPhone web browser applications, for example "Mercury", "Opera Mini", "Skyfire" and none of them works except "Dolphin" (good work).
- Resetting any of the settings in the phone, clearing cache and such have no effect.
- Resetting the iPhone totally, factory settings. No effect.
- Using someone elses iPhone. I've tried on an iPhone 4 and iPhone 3S, same problems (with iOS 5.01).
- Trying out all of the settings in google, no change.
- Setting the google view to "classic" instead of "mobile" works of course, but that makes the site look just like on a PC or Mac and is not what I'm after.
Third, this problem seems to just affect Swedish users from what I can tell. There would be thousands of posts about this if everyone in the world was affected by it, but so far I've seen no posts on this matter. But after searching a while I found a swedish forum site on the subject. Link (in swedish). Also, when visiting google from Sweden some form of script automatically changes the url from .com to .se. I don't know if this has something to do with it?
Anyone know what causes this problem and how It might be resolved?
Best Regard
Stefan, Sweden

Hi Stefan,
First; this must be the most thorough error discription I have ever seen. Impressive.
Second; yep for a couple of weeks now I've been having exactly the same problems as you describe. One other thing that I've noticed, is that for me, the 'word suggestion drop down list' or whatever it's name is, no longer works. More specificly:
I open Safari in my iPhone, surf to Google image search and type for example "dog" in the search field. Below the field, I now get a list of suggested words or phrases that I think is based on the most popular searches. For me, the first suggestion in this list is "dogo argentino" (a specific and popular breed of dogs). When I tap on the words "dogo argentino", the search field normally would switch input from "dog" to "dogo argentino" AND starts the image search automatically. However, since the problem showed up, when I tap on "dogo argentino" the input field is not affected (still reads "dog") and I would have to type "dogo argentino" manually and hit "search".
I use a Swedish iPhone 4S (5.0.1 (9A406)) in the Telenor network. I also have tested the same possible solutions that you describe in your post, but with no luck.
All the best,
Ingo

Splash image not working in JNLP

Hi all...
Splash image is not get displayed in my Application..
Here is my JNLP file.
<jnlp spec="6.0+" codebase="http://localhost:8080/MyProject/">
<information>
    <title>MyProject1.0</title>
    <vendor>My Company.</vendor>
    <homepage href="null"/>
    <description>Application Launcher For MyProject1.0</description>
    <icon href="http://localhost:8080/MyProject/images/Splash_MyProject.jpg" height="300" width="560" kind="splash"/>
    <offline-allowed/>
</information>
<security>
    <all-permissions/>
</security>
<update check="timeout" policy="always"/>
<resources>
    <java version="1.6"/>
    <jar href="http://localhost:8080/MyProject/SwingApplication/mysql-connector-java-5.0.6-bin.jar" download="eager" main="false"/>
    <jar href="http://localhost:8080/MyProject/SwingApplication/MyProject1.0.jar" download="eager" main="true"/>
    <jar href="http://localhost:8080/MyProject/SwingApplication/liquidlnf.jar" download="eager" main="false"/>
</resources>
<application-desc main-class="com.mycompany.ui.MainWindow">
    <argument>production%0%3#com.mysql.jdbc.Driver#MyProject4%jdbc:mysql://10.100.1.89:3306/MyProject4%MyProject%info123#MyProject2%jdbc:mysql://10.100.1.89:3306/MyProject2%MyProject%info123</argument>
</application-desc>
</jnlp>Splash image not get displayed and then I change *<java version="1.6"/>* to *<java java-vm-args="-splash:resource/images/Splash_MyProject.jpg" version="1.6"/>*
still splash image not get shown on application startup..
no java.awt.SplashScreen() class instance found.
Plz anybody give some idea...

I have also a problem with the splash screen not displaying. This is the first relevant portion of the jnlp:
<jnlp spec="1.5+" codebase="http://www.i-modulas.nl/downloads/"
href="imodulas.jnlp">
<information>
<title>i-Modulas Thin Client</title>
<vendor>i-Modulas Software BV</vendor>
<icon kind="splash" href="http://www.i-modulas.nl/downloads/javathinsplash.jpg"/>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.5+"/>
<jar href="isrun.jar"/>
<property name="iscobol.conf" value="http://www.i-modulas.nl/downloads/javaclientproperties.txt"/>
</resources>
<resources os="Windows">
<property name="swing.defaultlaf" value="com.sun.java.swing.plaf.windows.WindowsLookAndFeel" />
</resources>
<resources os="Linux">
<property name="swing.defaultlaf" value="com.sun.java.swing.plaf.gtk.GTKLookAndFeel" />
</resources>
The application starts normal and uses a different look and feel under Windows as under Linux, but I do not see the splash screen. I tried different ways of referencing to the picture and I also tried using a .gif format. It never worked!
Any suggestions are welcome!
Ren�

Copy and Paste of Images NOT working.

When I right click on an image and choose 'copy image' and then try to paste it into my editing software, all i get is a string of text that is the location of the image as if I had chosen 'copy image location' instead. what gives?

I too was unable to copy & paste ''IMAGES'' suddenly. This function continued to work correctly in my Internet Explorer and Chrome browsers while not working in Firefox. (I WAS able to copy & paste ''''TEXT'''' however in all 3 browsers.)
As described by another poster, I would click on "Copy image" as I always did, but instead of the image appearing when I clicked paste, the ''URL'' of the image appeared instead.
My computer developed this problem suddenly yesterday after downloading and installing the newest version of Firefox, which is 12. I tried some of the suggested solutions here to no avail, but I strongly suspected the problem was with Firefox 12. To test this, I re-installed Firefox 11 and immediately my copy & paste function started to work correctly once again and I am now able to copy & paste images once again.
I will not install Firefox 12 again until Firefox corrects this problem. I need this function and do not want to have to deal with a convoluted method of saving a graphic with unnecessary extra steps, thank you. Every single time I upgrade Firefox, something is incompatible with the new version and no longer works. This is always a nuisance, especially when it is my Norton toolbar.
This time it was my copy & paste function (again, for images only.) Anyone else with this problem should re-install Firefox 11 to see if their copy & pasting of images function is suddenly restored, as mine was. Good luck! :)

Uploading Images - Not Working?

My company updated to the Dreamweaver CC version and I’m having trouble getting the images to upload. The text and hyperlinks come through, but no new photos. We are using Dell PCs, Windows 7, and a 64-bit OS.
Examples:
http://www.pookandpook.com/categories/moderndesign.php (should be the fourth photo down in the second column - Italian Lucite and Leather Living Room Suite $2,460)
http://www.pookandpook.com/categories/jewelry.php (Half way down below the green jade brooch – photo for Diamond 14K White Gold Ring $5,904)
I’m not getting an option to “Check Out” the pages like I used to with the old version of Dreamweaver we were using. The text is there, but it is grayed out and not "clickable." When I select “Get”, it runs through some things, but nothing opens. When I double-click it finally opens. But when I save, nothing is saving to the local view.
I’m just totally confused that the text is coming up, but not photos. Any thoughts on what I am doing wrong? I don’t know much about Dreamweaver… I just basically add photos, text, and links to existing pages.
Someone told me my image folder may be located in the wrong place, but I don't know where the right place is?

Something isn't quite right with the image paths on those few images. When I view the page most work and point to ../pookSite. On the ones that are not working they are showing a path 4 levels deeper ../../../../ . If you update those paths on the page the problem should be resolved.

FP.Get Image not working on a subVI if it has a picture control

Similar Messages

Maybe you are looking for