FP-TC-120

Hello All. I have FP-TC-120 thermocouples input module + FP1601 network interface.
It had been work perfect. Tonight was electrical supply failure and now it looks broken :
- on the panel of FP1601 Power light - on; Status led (red ) - shines intermittently; network leds -shine intermittently; A-D leds - off.
- on the panel of FP-TC-120: power light - shines intermittently; Ready light - off; Thermocouples input leds (0-7) - are flashed.
Anybody have an idea about this?
Thanks,
Yury

We do have several industrial power supplies which will work with your controller. You can calculate the current draw you need by using the equation in the user manual for your controller found on pages 2-11 to 2-13. Based on this you can select whichever power supply is appropriate:
NI PS-15 5A, 24 VDC
NI PS-16 10A, 24 VDC
NI PS-17 20A, 24 VDC
NI PS-1 through PS-5 Legacy DC Supplies
While we recommend using these the [c]FP systems will work with any typical power supply that provides an output within the specifications of 12-30 VDC and sufficient current.
Craig H. | CLA | Systems Engineer | National Instruments

Similar Messages

HP AiO Remote app will not recognize scan and copy function of HP Envy 120

Good morning! HP AiO Remote App is installed on my iPad4 and in the same WiFi network with my HP Envy 120 printer. The printer is recognized by the app and marked with a green led. When I tap on scan or copy in the app menu, it tells me that these functions were available in the app only for printers which provide these features. But HP Envy 120 has both scanner and copier. And last time it worked. Some idea what could have happened here? Thanks. UJ

Replied on: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/HP-AiO-Remote-will-n...
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP AiO Remote will not recognize scan and copy function of HP Envy 120 printer

Good morning! HP AiO Remote App is installed on my iPad4 and in the same WiFi network with my HP Envy 120 printer. The printer is recognized by the app and marked with a green led. When I tap on scan or copy in the app menu, it tells me that these functions were available in the app only for printers which provide these features. But HP Envy 120 has both scanner and copier. And last time it worked. Some idea what could have happened here? Thanks. UJ

Hi UJKarl, welcome to the HP Forums. You should be able to scan from the HP AIO Remote App on your Envy 120 printer. You probably just need to power cycle the printer, iPad and router to regain proper function.
Turn off your printer with the power button. Power down the iPad by holding the sleep button down until you get the option to 'slide to power off'. Then disconnect the power cord to your router and count to about 10, and then plug it back in. Once the router comes back online, turn the printer on. When the printer comes back online (blue wi-fi light stops blinking), then power the iPad back up. Try again, and it should work.
Let me know how it turns out.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Ipod classic 120 stuck in disk mode, not recognized by windows or itunes

so ive been havin tons of problems with my new ipod 120 classic
first one day when i plugged it in it told me it was corrupted and needed to be restored
then it would not restore
i formated it with windows but that didnt seem to do anything
the other night somehow i got it to the point of naming my ipod but after that, it stopped working again
for a while i couldnt even put it into disk mode
now, when it is plugged into the computer it is stuck in disk mode, yet not recognized by the computer or itunes
it makes the sound when i plug it in but never shows up
also, when its not plugged in, it starts up and just brings me to a screen that says use itunes to restore. but then i plug it in and it goes right to disk mode and do not connect, and isnt recognized
when i unplug it i can see it pop up on my computer for that one second i unplug it
ive tried this on a number of computers and it does the same thing
when i unplug it from being plugged into the computer it just sits in diskmode saying ok to connect
if i reset it by pressing center and menu, it just goes back to the use itunes to restore screen
i cant get it to enter diagnostic mode, and when i hit center and play after center and menu it does nothing either
ive just about had it with ipods
this is my 3rd or 4th classic that i have had problems with
apple should be ashamed of themselves for such a buggy product for so much money, and very very crappy service
any help greatly appreciated....but im prety sure ill be moving onto another product after this
luckily i am still under warranty so they offered for me to send it in....but then i am without music for about a week
i feel i should be compensated for that alone, aside from just fixing it for me
please help me fix this so i can get back to some tunes!
thanks for any info

1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad

How to partition 120 GB hard drive MacBook for OSX+Win (BC+Par.)? Fat/NFTS?

After many happy years with my PowerBook G4 12" (I will miss it definitely, as compact and cute as it is ;-() I'll now switch to a new MacBook 2.16 GHz with 2 GB RAM and a 120 GB hard drive.
I will have to use Windows (not yet sure if XP or Vista), as I need special software not available for the Mac, so my choice will be Parallels, so that I can work in Os X and at the same time use those Windows Apps I need.
However, I also want to be able to boot Windows-only with BootCamp, so I already learned I have to install Windows on its own partition.
So my question is:
How shall I partition the hard drive?
* If I have one big partition for OSX + documents and the rest (maybe 30 or 40 GB) for Windows, I won't be able to access my documents from Windows, right?
* So I would have to keep the data I want to access from within Windows on a PC formatted partition (if I don't want to pay for a software like MacDrive)?
Or can Windows running in Parallels read from a HFS partition?
* Does this mean: if I want to access (read and write) my documents in OSX and Windows, I have to keep them on a Fat32 partition?
-> This could be the partition where Windows is installed (but I'm not sure if I feel comfortable with that solution) of I would need a 3rd partition (Fat32) for data which would cause quite a big "segmentation" of the hard drive.
How did you resolve this problem?
Unfortunately, I don't see that I could really "separate" data I only have to access from Windows and those I only want to access in OS X, so in my opinion for me they all have to be in one place.
Looking forward to your comments,
Martin
MacBook 2.16 GHz, 2 GB RAM, 120 GB HD (white) Mac OS X (10.4.9)

You should probably ask all your Boot Camp quesitons in the Boot Camp discussions:
http://discussions.apple.com/forum.jspa?forumID=1165
And your Parallels questions in the Parallels forums:
http://forums.parallels.com

Satellite U400 BIOS 4.0 doesn't work - error 120

Hello to All.
I tried updating my u400 with the newest 4.0 BIOS, and WinPhlash says BIOS is incompatible with current system BIOS + New BIOS part number doesn't match system bios part number. Error 120.
It says i should refer to the Help, but there is no .hlp to open...
I know I downloaded the proper file, i've flashed BIOS previously, i now have version 3.7
Anyone know how to solve this issue / had the same issue?
Tamás Lengyel

What is the exact model number of your Satellite U400?
I have checked the Toshiba website and I can find different model numbers of Satellite U400 so I think not every BIOS is compatible with every U400.
So check the Toshiba website again and choose your model on the list:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Notebook => Satellite => Satellite U Series => Satellite U400 => (*Short Model No*)

My HP Envy 120 won't scan to Mac

I successfully connected the HP Envy 120 all in one printer to my MacBook air and have been scanning for a few weeks now. However, although the overview scan still works, when I click on Scan, I just get the message "done scanning selected areas" - nothing gets saved. Where have I gone wrong? Checked all software is up to date. So frustrated because it took me ages to work out how to get everything set up in the first place!!!
Please can anyone help?

Thanks - but this is getting a bit beyond me - I just wanted a plug and play! It's still under warranty so I will take it back to John Lewis and ask them for something more compatible with a Mac.
Thanks anyway!

Envy 120 scanner

Envy 120 all-in-one printer well within warranty (bought end of August 2014).
Trouble: sudden fault of scanner.
I got in touch with Scott of the Canada-USA on November 17, 2014, around 10:08 PM (italian time).
He gave me all the instructions by thHP Print&Scan Doctor (new driver, new firmware, ecc), obviously with the null result: it is not possible to establish a link between PC and my Envy 120.
Anyway, by means of the copy function I can state that without doubt there is a hardware fault as I see that scan light ioff, while the sensor detects external light.
I hope I will get from you instructions for the substitution.
Thank you.
Andy1943
P.S. The scan function seems quite a problem in Envy printer: a previous Envy 100 (out of warranty) exhibted a simmetrical fault: scan light on, scan sensor out of use
This question was solved.
View Solution.

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Envy 120 cartridges. HP 300 or HP 60?

Dear Support,
Few months ago I bought a new HP Envy 120 All-in-one-printer and I'm happy with it. Now the print cartridges are quite out so I'm preparing to buy a replacement.
I really don't know what is the correct code. That is: if I go to printer webpage, Tools, Product Information, Print Gauge, I see that the part number for cartridges is HP 300. Then I click the link "Order supply" (..Sureidentifier will identify the printer for you), but the supply is not identified (the search engine of suresupply doesn't even recognize "HP 300"). If I search for "Envy 120", the suggested replacement is HP 60.
Which is correct? HP 300 or HP 60?
What about region limitations? I bought the printer from Amazon, I don't know where it really comes from.
Thanks in advance.
This question was solved.
View Solution.

Hi Mario,
If the printer provided with the 60 ink cartridges, it is only intended to accept those cartridges for America.
The 300 ink cartridges are intended for the same printer but for Europe.
If you moved to another country in Europe you should contact the local HP Support in order to reset yoru pritner to acept those cartridges.
Please let me know what region you are from so it will be possible to provide you the local contact details for a such.
Regards and happy new year
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP envy 120 - scanning via aio app

Hello,
I am having a problem using the HP All in One app for scanning.
I am using an HP envy 120 printer/scanner.
The printer and scanner work fine when operating directly on the printer device.
However, when using the app, the printer works fine but the scanner does not. I am trying to scan a document on the printer, but manage the scanning process from my ipad. The app triggers the scan to start (the printer recognises this and moves the scanner over the document). But the app then stops and displays an error message: "There was a problem during the scan. Please check the scanner and try again."
I have not been able to find a solution for this online. Can you please help? Thank you.

Hello AckHP,
I see you are trying to scan with the AiO Printer Remote Mobile App, using the Envy 120 and an iPad.
Seeing that you can print from the iPad, scan and print from the printer control panel, it would seem to be a communication issue between the router, iPad and printer.
1. Try checking for updates on the printer first, Getting the Latest Firmware and Product Updates. If this helps, no need to continue.
2. Power reset the iPad, printer and router.
First the router; if it has a power button, press that. If not, remove the power cord.
Remove the power cord from the printer, while on.
Hold the Home and Lock button down on the iPad till it powers off.
After one full minute, power on all devices and try scanning again.
3. Uninstall and install the App, then try scanning again.
Let me know the results.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP envy 120 and Macbook

I recently posted here that I could not connect my Macbook to the HP printer. Someone kindly resolved the problem by suggesting I switch the router off and on again, which seemed to do the trick.
A couple of weeks later, went to use the printer to scan something and guess what, Macbook does not see the scanner! This time, facts are different. I can print from the Macbook to the HP Envy 120 printer through the wireless router set up. This time, I cannot connect to the printer via HP direct. Nothing is coming up when I try to scan from the Macbook - it can see the HP Envy but when I click on Open Scanner, it doesn't seem to connect. If I try and scan from the printer, it says No computer detected. The printer seems to be connected to the wireless ok. Tried switching router off and on again, no results, rebooting computer and switching printer off an on again, nothing. Reinstalled latest printer driver software, nothing.
Please can anyone help?
A propos, this is becoming a crazy, crazy situation that everytime you want to use the HP printer, you are faced with a different problem trying to get it to work. I seem to spend half my weekends trying to get it to work. Is it me, or does this happen to most people?
Thanks

Hi @sueholt0 , welcome back to the HP Forums!
I see you're having print issues. I'd like to help.
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend reinstalling the HP ENVY 120 e-All-in-One Printer Full Feature Software and Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

ENVY 120 will not copy or scan

I unpacked my new ENVY 120 yesterday.
I can print OK. Although on one occasion, printing 2 pages per sheets in duplex, the second side was unreadable. Tried again and the output was satisfactory.
The issue I have is with copy which should be straight forward ...
- If I touch copy and then print preview, the display says "Copy preview in progress" and stays there for hours (until I run out of patience)
- If touch copy and then black or color, the display says "Starting copy" and stays there for hours (until I run out of patience)
In all cases, the red x (cancel) is unresponsive. The only way to get the printer back is to touch the power button to shut the printer down and then restart it.
I have the same issue if I attempt to scan. The display stays on "Preparing scanning..."
I suspect the product is faulty. Since it does not appear possible to talk to anyone directly at HP to fix or confirm, if I don't get a satisfactory answer today, I will pack the printer send it back and buy another brand.

I am having the same issue with my two Envy printers. They will neither scan nor copy. They simply read "Copy Preview in Progress" and never progress past that screen.
Wish there was a better way to get support than through a forum that no one at HP apparently reads.

Touch screen on HP Envy 120 printer

My touch screen on my HP Envy 120 printer does not light up. The printer turns on and I can print from my computer but unable to scan or copy a hard copy document from the touch screen. Is there an easy fix for this or do I need to return the printer. The printer was purchased in December 2013.

Hi Brode,
I see your Envy 120 printer touch screen is not lighting up.
Do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause.
Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see,
ISSUE:
Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
This is not limited to Laserjet printers.
Please also ensure you have the newest firmware version; Critical firmware update to improve printer performance.
If the issue persists, I recommend calling HP and letting the know the issue as well as the steps you have already completed. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Need to create a transport of SD config data from DEV 120 to DEV 110

During our conversion some config modifications were mad in DEV 120 instead of DEV 110.
I need to get the config:
SPRO> Sales Distribution> Billing> Billing Documents> copy sales documents to Billing documents
From 120 to 110.
I have tried to force a transport creation in 120, and used SCC1 to import into 110, but no data comes over.
How can I force all the data from these config tables to load into a transport so can send from 120 to 110.
Thanks,
Bev Barbush

Hi Beverly,
I would try bringing this transport in via STMS and then reviewing the import log to see why the data is not going across. What I've normally seen in this situation is the data was not correctly added to the transport before it was imported.
I would NOT copy config tables back from the QAS system. Copying select portions of config data from one system to another is likely to break all sorts of logical relationships between tables.
Have you guys tried running a config comparison between 110 and 120 to see what the actual differences are?
Hope that helps.
J. Haynes

Memory on my macbook air keeps disappearing. I have 120 gigs and I am down to 150mb without adding any files.

Memory on my macbook air keeps disappearing. I have 120 gigs and I am down to 150mb without adding any files.

Thanks...I have tried the various options and the only item of interest is that my only account on this computer says it has 102 gig of memory used up. However, when I open and look at the individual files, they add up to less than 15 gigs.

Building new system, MSI X58 Pro-E, i7 920, GTX 295, 6gb, Thermalright e-120

Hello, I was hoping for some advice on this rig, to overclock or not, etc; Im a bug gamer, so its really about gaming to the max 1st,
Heres the brand new parts;
MSI X58 Pro-E (In the box, just arrived, do not know bios yet)
i7 920
Patriot Extreme Viper PVT36G1600ELK 6GB DDR3 9-9-9-24
eVGA GTX295 1792mb CO-OP edition
Thermalright extreme e-120 cpu cooler (Jesus that thing is huge)
Im going to re-use this stuff:
2x500gb seagate HDD sata raid 0 for performance
Antec 900 case Lots of fans...nice
DVD RW
Corsair TX750W Says 60A on a single +12v rail (I think its good, only @ a year or so old)
SB X-FI Fatality gamer sound card
So, basically should I look to OC this setup a bit? maybe to like 3 GHz or so? If so, whats the "safest" method to OC? I have an excellent cpu cooler and a case that has a ton of fans in it so hopefully I should be good for cooling.
Do I just OC the CPU? Will the memory run at its top speeds with this chip? or do I need to do something for the memory also, I recally for some reason on my current PC with a 780i SLI evga mobo I had to set the ram timins manually, they were never picked up properly on "auto", will I have that also on the MSI board?
I hope Ive provided enough information to get started.
Thank you for any help!
Oh, I plan to build this baby the following weekend as I am working the next 2 weeks straight...meh

Quote from: Rebel230 on 08-July-09, 08:29:48
So, basically should I look to OC this setup a bit? maybe to like 3 GHz or so?
Yes, why not?
Do not be aiming for 3 GHz, you can run that on stock voltage. 4 GHz is more within the grasp of the TRUE 120.
Quote from: Rebel230 on 08-July-09, 08:29:48
If so, whats the "safest" method to OC? I have an excellent cpu cooler and a case that has a ton of fans in it so hopefully I should be good for cooling.
There's only one way to overclock - overclock... There is no safe way of doing it...
Quote from: Rebel230 on 08-July-09, 08:29:48
Do I just OC the CPU? Will the memory run at its top speeds with this chip? or do I need to do something for the memory also,
The only way you can overclock a CPU without overclocking anything else is with an extreme edition CPU. (The i7 965, for example.) It's overclocked by raising the CPU multiplier, not the baseclock frequency.
With regular CPUs, you overclock the baseclock, which overclocks the CPU core, CPU uncore, memory, and QPI frequency.
Quote from: Rebel230 on 08-July-09, 08:29:48
I recally for some reason on my current PC with a 780i SLI evga mobo I had to set the ram timins manually, they were never picked up properly on "auto", will I have that also on the MSI board?
Extremely doubtful.
I hope I've answered your questions. I can be more thorough if you wish to know more. Of course, Google can tell you more than I ever could.

FP-TC-120

Similar Messages

Maybe you are looking for