FP05 payment Lot

Hi
I created a payment lot (FP05) with many items. After closing and posting it, one of these items is not posted. After analyzing, I found that this item was created by mistake. How can I remove this one from this payment lot? or how this item will be invalid?.
Best regards and many thanks for your help.
Said

Hi Said.
If you want to keep the same payment lot, then you can use the post online functionaly and post the item into the bank clearing account:
- start FP05, enter the payment lot ID, display it, select the item you want to clarify and choose "clarify"
- select option "post online"
- the false item should be visible in the view - now enter another item with all the same data, except for the negative amount
- post it
In general, I dont think you can remove an item from payment lot after its being posted. Another possibility is reversing the reconciliation key for that payment lot (using FP08M), and using another posting lot without the payment entered by mistake.
Marko

Similar Messages

  • FP05-Payment Lot/ FP25-Check Lot

    Hi
    Can anyone tell me the diffences between the above two T.Codes.
    which transactions code we should use for cheque payment. like single receipt.
    In case of outgoing payment of single cheque with cheque print which transaction i have to use apart from FPY1.
    Thanks

    Hello,
    FP05= Creates Payment Lot
    FP25 = Creates Cheque Lot
    In chq lot you can capture the chq info. It all depends on the policy of your co to choose bt them. usually if the incoming bank file provides you chq no, Chq lot is used
    Even if it is single chq payment, you have to use FPY1.
    Hope this helps
    Rgds
    Rajendra
    pnts!

  • Posting Payment Lot using Transaction FP05 Tcode in SAP IS-U From Database

    Hi,
    I want to post a payment lot, using transaction FP05. It is BDC.  Data is in Database that have to be posted on SAP ISU ,
    If anyone knows how  FP05 tcode structure please give your suggestions. So i can send the data to ISU using XI with JDBC
    Thanks & Regards
    Laxmi Bhushan
    Edited by: laxmi bhushan on Nov 12, 2009 1:14 PM

    Hi Suraj,
    No , My scenario is to send data from sql server to Sap ISU using XI/PI 7.0. Where we have to post my data to a Transtion code FP05. I am unable to find out the structure where FP05 Transtion store the data or wether we have to create a IDOC or BAPI for that transtions .There is millions of data so we have to automate this process using PI.
    Pl Suggest.
    Thanks
    Laxmi Bhushan

  • Clearing from payment lot(FP05) and cash desk

    Hi ,
    Background of the issue: when we post from payment lot or cash desk account clearing happens( clearing open items).
    Issue: My client has a requirement when the posting is done for a particular account from above two (payment lot or cash desk) clearing should not happen for the open items (documnets)which has any payment method on the item(document)(like P-payed by phone).
    For me it looks like ,this issue can be handled  using customer module in clearing variant.but can some one let me know which module should be called?at what step of the clearing variant?I don't have much knowledge on clearing Variants.(I am not sure this is right approach)
    Also please suggest other solutions? Again this process (avoiding clearing  open items with payment method)should be triggered only when posting is done from payment lot and cash desk.
    Thanks,
    Shiv

    Dear Shiv,
    For me the best way is  use the event FKK_SAMPLE_0262  if you dont need the Payment send to clarification....
    But their is others ways ; 
    1 - Event FKK_SAMPLE_0110 this is for all Payment ( You can Clear the Internal Table by validating that you need  t_fkkcl )
    2  - events by the varinat of conpensations FKK_SAMPLE_TFK115 /FKK_SAMPLE_TFK116
    I hope it help
    Andre Frugulhetti

  • Payment lot (FP05) input text to FICA document

    Dear all,
    Is there any ways to input information in payment lot items and it pass to text field in each FICA document (table DFKKKO, DFKKOP, DFKKOPK)?
    Currently I can only input such information in usage text and it keep in table DFKKZP.
    Scenario:
    I have to use receipt number generated from agency as an official document number of payment document.
    Thanks in advance,
    Kaew.

    Hi Andre,
    The event 0020 doesn't have T_FKKZP. Is it the event that you are referring or some thing else?
    Kaew,
    I too have a similar kind of requirement. The value that is entered in DFKKZP-INFOF need to be populated into DFKKOP-OPTXT. Though you are getting the value of DFKKZP through the global variable, where you are modifying the DFKKOP? Are you doing this modification in some other event?
    Appreciate your quick response.
    Regards,
    Nanda.

  • Open Items not considered for Payment Lot

    Hello Experts.
    I have created some open items using FPE1. They are displayed as due in FPL9. But the same open items are not selected in FP06 for clearing. They are also not considered for clearing in a payment lot (FP05).
    Can some one tell me what could be the reason for this
    Best Regards
    Venkat

    If you have a clearing restriction, to be able to remove it when you change the document in FPE2 for example you need to activate that clearing restriction in:
    Financial Accounting > Contract Accounts Receivable and Payable > Basic Functions > Open Item Management > Define Modifiable Clearing Restrictions
    If you don't do that you cannot manually change it.
    Adriano.
    PS: Again are people in these forums that put answers to be in the statistics... GOD..

  • Function module to Create payment lot name

    Hi ,
         I have to create a new payment lot from a Z program
    (program will run in a batch mode) and this payment lot will be passed to standard bapi : BAPI_CTRACPAYMINC_APPEND to upload the data in payment lot. For creation of payment lot I am using Function modules as FKK_CREATE_NAME_OF_PAYMENT_LOT
    or
    FKK_PAYMENTLOT_KEY_CREATE  
    ( either of 1 )...but the function modules return me the name of payment lot..but when i cross check it in FP05 it says "lot not yet created" . Please let me know what could be the reason that payment that lot is not getting created. Is there any other FM which we can use. PLease let me know .
    Thanks
    Sandeep

    Hi Sandeep,
      We cannot create the Payment lot using FM's FKK_CREATE_NAME_OF_PAYMENT_LOT or
    FKK_PAYMENTLOT_KEY_CREATE .These FM's will create only the Payment lot name which can be used to create Payment lot.
      IF we want to create Payment lot through Z program we have to create a file and pass data to file with structures
    BFKKZGR00(File Header)
    BFKKZK(header data)
    BFKKZP(Line items).
    We have to pass this File and Identification to Report Program--RFKKZE00(Transaction-FPB3).
    Submit this report program ---RFKKZE00 in background.
    hope this is helpful.
    Regards,
    Sravanthi.

  • Idoc for Incoming Payment lot creation

    Hi Experts,
    Currently i am working on an inbound interface which  has the requirement of Incoming payment interface from a Payment Processing center  which processes payment (cheques, payment stubs for over the counter payments, etc) and sends daily to SAP.
    For the above the Details given as:
    1. Transaction is FP05.
    2. IDOC Should be used.
    Can any one of you please suggest me the suitable IDOC for the Incoming Payment Lot Creation.
    NOTE: If there is no idoc, BAPI is also Recomendable for this requirement(last option).
    This is very urgent.
    Thanks And Regards,
    Loganathan.E.

    Hello,
    If you are receiving Payment file,
    Use program RFKKZE00 to post payment lot in mass.
    But you need to hold the data in the SAP provided structure
    RFKKZEDA/RFKKZEDG and process them
    else if you are receiving Returns file,
    Use program RFKKRL00 to post Return lot in mas
    But you need to hold the data in SAP provided structure
    RFKKRLDA/RFKKRLDG
    else you can use BAPI ‘BAPI_CTRACDOCUMENT_CREATE’
    Rgds
    Rajendra

  • Payment reversal with a closed payment lot

    Hi to all,
    We want to reverse a payment that was done in the wrong company code. Usually we can reverse payment documents using FP08. But this mistake was noticed today (monday) but the payment was done last friday.
    How can we reverse this document? The transaction FP08 is giving us this message:
    Reversal of payment document not performed
    Message no. FICA_CD043
    Diagnosis
    Payment document 580000002156 is not reversed since it was posted in the cash journal and the relevant payment lot 227001001 has already been closed.
    System Response
    The system refuses the reversal.
    Procedure
    If necessary, post a clearing reset, since the payment document may have already been included in a cash desk closing.
    What are our options? for us is useless to reset the clearing cause we did not clear anything with this payment actually it entered as a "post on account" and did not clear anything.
    How can we open again a payment lot in order to be able to reverse the payment? I have tried using FP05, but I can manage to open the close lot which contains this wrong payment.
    Thanks for your help
    Regards
    Sergio

    Hi Steve, thanks for answering but when I use FP07 the system sents the following message:
    Document 580000002156 is not a clearing document.
    So far what we have done is to repeat the payment in the correct company code. Now the situation is that the student has a double payment one for each company code.
    Do you recon I should use fp04 to cancel the payment? I would prefer to reverse the document, but I can not found how to do it.
    The original wrong payment could not clear anything due to the fact that all open items belonged to another company code and we do not have inter-company clearing. That is why the payment entered as a Payment on account.
    Regards
    Sergio

  • Payment Lot

    Dear Friends,
    I am getting the following error  for the Payment lots( Cash and Cheque) generated by Cash Desk when I try to close them using tcodes FP05 or FP25 the next day.
    "Lot for payments using Cash desk
    Reserved lot, no manual entry of payments
    Payment lot is incomplete"
    I am able to close the lots on the same day using 'Lot Mangement' function in Cash Desk.
    Can any of you help me ?
    Thanks and Regards
    Rajesh

    Rajesh,
    I have gone through the program & functionality of FPCD.
    My understanding is that Previous days lots are not visible in FPCD.
    However, in data base table DFKKCDLOTS you can find all the lots created for Cash desk.
    Take the lots from it and go to Function Module <FM> FKK_CJ_CLOSE_PAYMENT_BATCH using SE37.
    Press F8 and give above lot <one by one> and press F8 again.
    This closes the lot <you can view the changed message in FP05 before and after the closure>.
    This is workaround to close the lots in FPCD.
    I did not see any standard procedure to close the lots.
    May be you can write a 'Z' program to automate them using above logic.
    Hope this helps?
    Rgds
    Rajendra

  • Cannot delete payment lot

    While posting a payment lot, it encountered an error and short dumped.  We checked every accounts and not a single payments were posted.  We created a new lot and it posted successfully.
    How can we delete the payment lot that short dumped to ensure that it will not be posted in the future?  We are getting the message "Payment lot xxxxxx cannot be deleted under current status".
    Thanks.

    Hi, normally you should have you payment upload if you used program RFKKZE00 lot in error in trnasaction FPB4 or in FPB3 (Use flag P_XCONT equal ot X). You have to complete the creation of the lot or change the status of you lot to ' 'Payment can be added, then you can delete it in FP05 in the menu 'Payment lot'. As long yout payment lot is in status 6 'Payment lot is incomplete' you can do anything with it.
    If you've upload you payment lot using multicash, check transaction FPB8 or FPB17, you have to complete the upload of the lot to then delete it, be careful on what you put in the option around Create Lot, Close Lot, etc...

  • Payment lot with Payment specification

    Hi
    I am trying to process a Payment Lot (FP05) using a payment specification (FPAY1B). After creating the payment specification and selecting it in the payment lot (J), the item is going to clarification with an error message that says "Status of payment specification XXX does not permit use".
    Thanks
    Allen

    Update the processing status field on the Payment Specification.
    Closed

  • Payment Lot Reconciliation

    Hello Experts,
    Our client has requirement for payment reconciliation i.e. validating payment posted using payment lot (bank payment lot file contains specific individual customer transactions) and actual cash received in the bank account/s. (contained in the BAI file, but it doesnu2019t contain specific customer transactions).
    We have suggested below solution -
    Payment vendor (Example. Bank or Credit Card process) payment file will be processed using standard SAP Payment Lot processing. This will debit specific BANK Clearing Accounts example. You receive payment lot file from the XYZ Bank, then it will debit XYZ Bank clearing account. Now, next day they receive BAI file from the bank containing actual cash, they will use it to credit XYZ Bank clearing account and then to debit Master Bank Account GL.
    So this way, they will be able to find the difference if the cash posted in BAI is different than the cash posted through bank payment lot file.
    Another approach is to create a custom report and then find out the difference posted between payment lot and BAI file. I would like to know what the best approach to solve this problem. Please let me know if you need more information. Thanks.
    Kind Regards,
    Nikhil

    Hi,
    On some  projects I have been on, we have requested that the banks following the same naming convention for the Payment Lot file as well as the associated cash file. The Naming convention would include the source bank and date, and a sequence number (in case there are multiple files frm the bank).
    A custom program can read the the Cash file and then the associated Payment Lot files. The custom  Reconcilation report will show (for a given bank and processing date):
    The difference amounts between the Payment Lot/s and the Cash File/s
    If there were clarified payments in the payment lots, the should also be summarised to aid with Reconciliation process
    I hope this helps.
    Ivor Martin

  • How to add additional payment line to a posted payment lot

    Hi Gurus,
    I have to add a new payment line to a payment lot which is already being posted.
    I will pick one document from table DFKKZP for the specified payment lot. Then I need to post another document with the same details as the document I have picked. Only thing I need to change is the price to a constant value to 1.
    Please help.
    Thanks,
    Gautam

    Hi.. I forgot to mention I have preordered the iphone 6 plus which is why I wanted to get some of the credit cards I use frequently added and ready to go before the apple-pay launch. Does anyone know if your payment settings in itunes let you add more than one payment option? The instructions I have seen state that you can add your additional credit cards through either the Apple store, or itunes. I have only attempted through the store unsuccessfully, not itunes.
    thanks

  • Cash desk and payment lots documents not updating in DFKKOP table

    Dear Experts,
    I have noticed that my cash desk payments and payment lot documents are not getting updating in the DFKKOP table. I have identified that for this documents, the document class is updated with "1" which means "Document does not have FI-CA items".
    But, the postings where shown in the FPL9 transactions and clearing is happening as per the settings and requirements.
    So please update me, on what basis the system would determine the document class for the document types in contract accounting..
    Your inputs on this issue will be really helpful for me.
    Thanks
    Aditya Viswanath

    Hi Aditya,
    In a simple word, whichever documents are posted with MAIN/SUB creates a new row in DFKKOP with document number in DFKKOP-OPBEL.
    If a payment is posted as an open credit item, it should be there DFKKOP-OPBEL field and BETRW and BETRH will be populated with payment amount.
    However if a payment is posted as a clearing document against a debt, system updates that row of DFKKOP where DFKKOP-OPBEL is the cleared document number (debt, mostly an invoice). Clearing document (DFKKOP-AUGBL) of that row is updated with the payment document number.
    In either of the cases DFKKKO and DFKKOPK are updated and below are the reason.
    DFKKKO - document header level information (as who created, at what time, origin key, reco key etc.)
    DFKKOPK - (GL level information of the document)
    For payment lot and payment document related information you can refer DFKKZK, DFKKZP and DFKKZPT tables.
    Hope it clarifies your query.
    Thanks, Bodhisattwa

Maybe you are looking for