FPE2 doc changes are not saved when C4EYE is reset via workflow
Hello All,
I'm utilizing event # 5504 in FQEvents (in FICA) to start a workflow.
When a user sets a payment method in FPE2, I set the C4EYE and then explicitly create a custom event which starts my approval workflow. On saving the document changes, I get a message "document changes noted" (instead of the usual "document changed" message).
The changes made in FPE2 are only seen as a 'planned change' button in FPE2 (on the 'change item' screen) with the old and new values and the change number associated with it. Also, the check reason has been applied. Incidentally, all of the above (except ofcourse the event and start start of workflow ) happens if I all I do is merely set the check reason (C4EYE) in event 5504.
Meanwhile, the workflow does its thing, determines agents and gets the approval and on approval, it calls FKK_C4EYE_RESET passing the document # and change # to reset the Check reason. Despite the workflow completing successfully and resetting the check reason, my newly added changes (such as the payment method etc) are blank - meaning any changes made in FPE2 have been lost. I don't have the 'planned change' button either.
Incidentally, to eliminate any problems with the custom-event-workflow logic, I also turned off the event and the workflow - just left the logic to set the C4EYE check reason to '01' in the 5504 fqevent in case a payment method is set. I set the payment method in FPE2 and 'saved' the change which set the check reason.
I then ran FM FKK_DOCUMENT_CHANGE_FROM_ID passing the doc #, change number (from CDHDR) and user name. All it did was to reset the check reason but did not set the payment method (or any other changes) back.
How can I apply the FPE2 changes (including addition of the payment method) back once my approval workflow resets the check reason?
Folks, Sorry to have bothered you. The document change had multiple change numbers for each of the changes and I was apparently passing the incorrect CDHDR change number to the FM "FKK_DOCUMENT_CHANGE_FROM_ID" which caused it to not reset the changes. Now, I'm able to see the payment method and any other changes restored back once the C4EYE is reset.
Thanks for your time!!
Similar Messages
-
Changes are not saved when I export
I change a photo to black and white in iPhoto, but then when I export the photo, all my changes to it are undone and I just have the original photo. The copy in iPhoto is still black and white, but the exported is not. I'm using iPhoto 2.0.1
Welcome to the Apple Discussions.
This is the iPhoto 08 forum and there are many, many differences between the two versions, so for best advice try this forum:
http://discussions.apple.com/forum.jspa?forumID=845
Regards
TD -
Since I downloaded Firefox 4, I have not been able to save changes to my bookmarks (this includes both adding new bookmarks or deleting old bookmarks). When I make a change, the changes are not saved the next time I restart Firefox. After doing a Google search I found a Mozilla help page that suggested deleting the place.sqlite file. After doing this, Firefox will save changes for a few days, but then go back to not saving the changes. I've done this twice already.
Sounds that you have cleanup or other security software that cause corruption of the file places.sqlite
You need to check the settings of your software and make sure that you exclude the Firefox Profile Folder to avoid such problems.
* http://kb.mozillazine.org/Profile_folder_-_Firefox -
Firefox 4 was working fine. Then one day, when I started up Firefox, it says "Proxy is refusing connections." I solved this by selecting "Auto-Detect Proxy" from Advanced network settings, but my changes are not saved and upon every start-up I must select it again! (I even completely removed my webroot antivirus protection, as it as hindering many proxy related programs, but this seems to not be the source of the problem)
You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Preferences_not_saved -
UI Shell : Changes are not saved. If you leave this page
Hi,
My JDeveloper version is 11.1.1.6.0
I have on VO having all transient attributes. The vo having dependent LOV's . When i am not not selecting the value from lov and trying to close the UI Shlll it is not showing warning message.
When i am changing the lov then trying to close the UI shelll then it is shows the "Changes are not saved..." warning message. I want to skip the warning message . How to do that
Thanks
Deepakgo to <af:document id="d1" > tag and then property inspector and the n make uncommittedDataWarning to off.
Thanks
Pratee. -
Web template changes are not saved.
Hello Experts,
I making a small change to an existing Web Template namely changing the tab page 1 to tab page 2 and vice versa.
I could see the message Changes are saved but at the end web template is same like as it was.
Any idea why changes are not being saved and how to over come this will be of great help.
Thanks in anticipation.
Best Regards.Hi.
The changes are not saved in WAD or has not affect when executing the WAD ?
Regards. -
After making changes to my iWeb site, I have re-published as well as saved all to .mac. However, the changes are not saved. How can I save the changes?
KHCrowley,
Welcome to Apple's discussions.
Try clearing your browser cache, and then take another look. The changes are most likely there.
Mark -
When i make changers to my firefox settings and i close the browser, the changes are not saved, why?
when i make changes in the options menu like - allow pop ups or never remember history, it works great but when i close the browser, the changes i made are not saved, this never happened on the previous version
i have unistalled firefox4 and reinstalled it but this dows not helpSee:
* http://kb.mozillazine.org/Preferences_not_saved -
Preference are not saved when leaving Photoshop elements 10
Hi,
Each time I leave photoshop elements 10 (bought on Apple Store), A windows says that I don't have the required rights and my preference are not saved. Each time I restart the program it is re-installing the effect as if it's a new install.
Any change done in preference window is not taken into consideration.
I understood that this is because Photoshop is trying to save on root directory, which is not possible as protected.
Anyone has a solution as it makes it almost unusable :-( How can I change the right or tell photoshop to save the preference file somewhere else?
I use Mountain Lion.
ThanksI do not need to install when I get from Apple Store. When I start for first time after downloading, photoshop starts first by creating content and effect window. After that the program works normally.
Except when I want to quit, another window open telling me that I don't have the users rights to save my preference.
If I restart again Photoshop it restart from scratch and tries to re-install content and effects, which should only done once.
My problem is that I bought the version 10 in february this year and I was not aware that a new version was coming, so I don't want toinvest another 69 Euros....I would at least have my version 10 working properly. -
The titles are not saved when i quit
After quiting FCPX the titles i have made are not saved for next time i open a project.
Some titles are saved sometime?Using FCP-X 10.01, OSX 10.7, 27" iMac 2010, 12 GB memory
I am having the same problem! I am using the Lower Thirds Gradient Edge title and I do change the font from Futura to Comic Sans and change the text size. The 58 large font I change to 55 and the 37 small font I cange to 45 (in case that makes a difference). I have used this for many titles in my project and some have the problem, others do not. It happens, as you say, when you exit the program and then re-launch.
Sometimes the titles go back to the template "Name", "Description", sometimes the title stays as written but the font goes back the generic Futura, and sometimes the font changes to a different one that is close on the font list to the "Comic Sans" that I am using! I did find that if I move the text boxes so that they have any overlap then the problem happens every time. However, I have been more careful with that recently and I am still getting the problem sometimes. Doesn't happen with every title which is what makes it more puzzling.
I have now taken to exporting a project file as soon as I have completed editing (I have 16 projects in the movie I am making) so that I don't lose what I have done!
Any ideas out there? -
Changes are not reflected when objects transported from Quality to Productn
Hi
In case of moving some Transport requests from Quality to Production, some times the changes made to the selection screen of a report program doesn't reflect in Production. Also we don't see any Transport error while transporting. Moreover, we can see the changes by regenerating the Program in production.
Would any one help me out in this with the reason for this.
Pls suggest what needs to be done.
Satish.HI,
Thanks for the reply.
- I have checked the respective transport too, and every thing seems to be fine.
- Recently we went to go live, for the next release, so earlier before go live, we didnt faced any proble.. Only now we are facing this problem, that we find the changes relating to selection screen are not reflected when the object / prog is moved from qty to Prd.
- Only problem is with the selection screen.(not getting reflected in PRD. In Qty we are able to see those changes.
- Then in order to reflect these changes in PRD, we have to re generate the object, then only it get s updated..
Satish.
Edited by: satish c on Sep 22, 2009 3:35 PM -
Changes are not reflecting when de-implemented the SNOTE.
Hi All,
I have implemented SNOTE : 79847 , which is having two steps one is manual and the another one is automatic . but now i want to de-implement the Snote due to some requirements .
After de-implementing the Snote ,i checked for changes in the standard program which were automatic . Over there the changes are not reflecting , that is the code which was got appended due to implementations of note , now it is not getting removed.
kindly help me out.....Hi All,
I have implemented SNOTE : 79847 , which is having two steps one is manual and the another one is automatic . but now i want to de-implement the Snote due to some requirements .
After de-implementing the Snote ,i checked for changes in the standard program which were automatic . Over there the changes are not reflecting , that is the code which was got appended due to implementations of note , now it is not getting removed.
kindly help me out..... -
Incopy CS4 (mac) - when closing file, changes are not saved
I have a CS4 Indesign document with assignments saved. When the editor works on the file, she is able to save as she goes, however gets a dialogue box about how we are trying to save over an older file with the options 'submit changes, discard changes and I think one other option'.
When 'submit changes' is clicked we re-open the file and find that the changes have not been saved.
We don't understand why we would receive that message since we are hitting save as changes are done while working on the file.
The odd thing is that it doesn't happen on all files. And the dialogue box doesn't always show up.
One thing to note is that we recently changed from a CS2 workflow that we've been using successfully for a few years. Ie. without that particular dialogue box showing up or any save issues.
thanks all!Lr & Photoshop both have the potential to use tiny (xmp) files for storing changes (and never save any other files), and both can save/export big honkin' tiffs, or like-sized jpegs...
If you save files in Photoshop with layers and such stuff, the files can get pretty big.
So, to answer your question: "It depends..." - which files, how saved/exported...
Try some stuff and inspect the file sizes!
Rob -
POI Information Updates when Costing Changes are not Saved
Hi All,
When you go to the costing screen of a party in Oracle HRMS, make changes to the costing string (Cost Allocation Flexfield) and not save them. Then, exit from the costing form and go to the Purchase Order Information (POI) screen and press Ctrl+F11, the POI information updates to the new changes. It was my understanding that in order for the purchase order info to be updated you need to make changes or "touch" the costing screen and save. I have noticed that the purchase order changes after being in the costing screen even without saving anything. Was this intend?
Thanks,
Naveen GagadamThe Changes on the Assignment reflect because of the changes on the Costing Screen. This is due to the custom.pll implementation. Is there an event name that I can use for the Assignment form such that the changes on the Assignment screen show up only after the changes are SAVED on the Costing Screen. Here's the code that we are using in the Procedure: Event of the custom.pll
====================================================================================
If Event_name = 'WHEN-VALIDATE-RECORD' then
-- 1. Costing checks at Assignment (PERWSEAC). This code copies first 4 segments of costing string
-- to Default Expense Account on the Assignment screen.The Code will perform this function for
-- the first Costing record but no other record.
if name_in('system.current_form') in ('PERWSEAC') then
Step_identity := 'Costing to Expense Account Population';
if name_in ('system.cursor_block') = 'COST' then
-- Check if current record is the first record in the block
-- prior to 4/6/05 this code only ran if first costing record. now runs for all and passes
-- whether first record to package. B Wagner
if name_in('system.cursor_record') = '1' then
lvc2_first_rec := 'Y';
else
lvc2_first_rec := 'N';
end if;
if name_in('COST.SEGMENT1') is not null
and name_in('COST.SEGMENT8') is not null
and name_in('COST.SEGMENT2') is not null
and name_in('COST.SEGMENT3') is not null then
lvc2_company_nm := name_in('COST.SEGMENT1');
lvc2_LOB := name_in('COST.SEGMENT8');
lvc2_location := name_in('COST.SEGMENT2');
lvc2_dept := name_in('COST.SEGMENT3');
FND_PROFILE.get('USER_ID',ln_user_id );
-- It has been assumed that the seperator for the flexfield segments is a period ('.') .
-- If the seperator is changed then the following line of code has to be modified.
-- If the number of segments in the flexfield definition is changed then the number of
-- separators has also to be modified.
ln_assignment_id := name_in('COST.ASSIGNMENT_ID');
ld_session_dt := name_in('CTL_GLOBALS.SESSION_DATE');
smc_customlib.set_exp_act(
ln_retcode,
lvc2_errbuf,
ln_user_id,
ln_assignment_id,
ld_session_dt,
lvc2_company_nm,
lvc2_LOB,
lvc2_location,
lvc2_dept,
lvc2_first_rec
if ln_retcode = -1 then
-- b wagner 4/6/05 - raise trigger failure so bad combinations can't be entered into costing screen
fnd_message.set_string(lvc2_errbuf);
fnd_message.error;
raise form_trigger_failure;
end if;
end if; -- If costing string is complete
end if; If First Record of COST Block
end if; -- If Block is COST
end if; -- For Assignment form.
================================================================================================================
Its the custom package that actually populates the changes in Costing Screen onto the Assignment Screen, but I want to activate this only when I save the changes on the Costing Screen. Right now the changes are seen on Assignment Screen when I hit CTRL=F11 even when I don's save the Costing Screen changes.
Thank You,
Ngagadam.
Message was edited by:
Naveen Gagadam
Message was edited by:
Naveen Gagadam
Message was edited by:
Naveen Gagadam
Message was edited by:
Naveen Gagadam -
I've been experimenting a bit with saving changes made to Canon 20D Raw files to DNG, but without success. When I open the saved DNG file with Apple's Preview, it displays the file without the changes. (I've tried "Embed original raw file," and not doing so.) This leads me to suspect that if I send the DNG file to a photo processor it will print the file without my edits. I am hoping that printing DNG files, rather than JPEG, will produce greater color and tonal fidelity. I have discovered no other reason for converting to DNG that is relevant to me. Is there a way to ensure that edits are properly saved to the saved DNG?
I've been experimenting a bit with saving changes made to Canon 20D Raw files to DNG, but without success. When I open the saved DNG file with Apple's Preview, it displays the file without the changes.
This is expected and normal. Most image previewers cannot read or understand the .xmp information created by Adobe Camera Raw.
This leads me to suspect that if I send the DNG file to a photo processor it will print the file without my edits.
If you can find a photo processor that handles DNG files, it is entirely possible that it will print the file without your edits, as you suspect. That's not because the edits aren't stored in there; that's because as far as I know, only Adobe software can read and make use of the edits from Adobe Camera Raw.
If you need your edits for some external (non-PSE, non-Adobe) application, you probably need to create a .tif or .jpg.
I am hoping that printing DNG files, rather than JPEG, will produce greater color and tonal fidelity. I have discovered no other reason for converting to DNG that is relevant to me. Is there a way to ensure that edits are properly saved to the saved DNG?
A pixel that is Red 200, Green 123, Blue 13 should print the same whether that pixel is delivered in a DNG, .tif or .jpg. Of course, if you convert a photo to .jpg, that pixel may wind up with slightly different values, but if you choose high quality .jpg, I don't think the human eye can see the difference, and if it could, I suspect the difference would not be "color and tonal fidelity"; instead the JPG would show artifacts. If you are experiencing problems with "color and tonal fidelity", this may be due to the printer, or the color profile, or a couple of other issues.
There has never been any claims that I am aware of (either here or at ElementsVillage.com) that edits are not properly saved to DNG. But the way to confirm that the edits have been properly saved it to close down PSE, and then re-open it and see if your edited photos show your edits. Similarly, your edits should also appear in other Adobe software (Lightroom, Photoshop). Under ACR preferences, there is an option to save your edits in a database or in .xmp file. Please make sure that .xmp file is selected.
Maybe you are looking for
-
Plano de Contas, contas contabeis fora de ordem todas as titulos juntas
Grupo, Já aconteceu em varios clientes a destruturacao do plano de contas, e nao tenho ideia do que faz acontecer isto, gostaria de saber se existe uma forma de colocar as contas contabeis em ordem se nao for manualmente. Jaqueline Martins
-
i put money to my itunes account. and now when i try and buy a song it keeps saying that it has to charge my card. why wont it let me use the giftcard money? how can i fix this?
-
How do i "save down" in photoshop cs2?
How do I save my Photoshop CS2 document in a lower version of Photoshop for a different user with older software?
-
Hook an internet ready blu-ray wirelessly to network
I have a Panasonic SC-BT200 Blu-Ray player that is internet ready (wired) but I was wondering if a wireless adapter could be inserted to connect it to my network. I am having a hard time deciphering which one is compatible if so.
-
How to check if my all speakers are working or not?
Hey ,wanted to know how t ocheck my speakers are working or not properly.model DV 66121 tx ,with beats enabled.i think my 1 speaker is not working ,how to check ?thank you guys.