Fpga labview 2012
hola tengo un problema entre la comunicacion entre labview 2012 y solidworks 2010 este es que cuando voy a simular el simulador en solid no arranca pero el de labview si y no me muestra ningun problema de comunicacion.
si alguien tiene la respuesta le agrdeceria mucho
Hola buen día.
Estoy realizando un proyecto universitario con una espartan 3e y labview 2011, instale el módulo fpga y el driver de la spartan 3e, el problema es que no me aparece el folder de xilinx university,(también lo intente con labview 2012 pero desafortunadamente obtengo los mismos resultados) Espero que alguien me pueda ayudar.
Muchas gracias y saludos a todos en el foro.
Anuar escribió:
Hola juancarmona!
Te refieres al LabVIEW FPGA Driver for Xilinx SPARTAN-3E XUP?? Este driver es compatible con LabVIEW 2010, sin embargo, necesitas contar con el módulo de FPGA para LabVIEW 2010 instalado en la computadora con la que deseas programar tu tarjeta SPARTAN-3E XUP. En el siguiente link podrás encontrar información para utilizar LabVIEW FPGA en conjunto con tu tarjeta:
Using LabVIEW FPGA with the Xilinx SPARTAN-3E XUP Starter Kit
Espero que te sirva!
Saludos!
Similar Messages
-
Bind FPGA host reference to type definition in labVIEW 2012 crashes labVIEW
Hi,
I am using FPGA target device 5641R and labview FPGA 2012 with 5640R ver 1.7.
On the configure window of open FPGA VI reference function, choosing the dynmaic mode shows broken arrow when wired to the 5640R configuration VIs (i.e. Configure timebase, Configure ADC default, Configure ADC NCO functions). So i tried the other option which is binding the FPGA host reference to type definition and choose the control from path C:\Program Files\National Instruments\LabVIEW 2012\instr.lib\ni5640R\Configuration\NI-5640R VIs\ni5640R FPGA VI Reference.ctl. But after that when i try to save the VI on which open FPGA VI reference function is placed, labVIEW crashes. I am unable to figure out the reason. Earlier I was working with labVIEW 2011 and it was working fine there. Any suggestions would be highly appretiated.
Please see the attached images for more details.
Thanks
Attachments:
1.png 33 KB
2.png 71 KB
3.png 40 KBCheck out this thread. It looks like someone else ran into a similar issue and made changes that fixed their application.
http://forums.ni.com/t5/IF-RIO/correct-5640r-template-use-recommendation/td-p/1331918
Jeff B.
Applications Engineer
National Instruments -
Where can I find LabVIEW 2012 FPGA module
Hi
I uase LabVIEW 2012. Could you please let me know where can I find LabVIEW 2012 FPGA module to download?Where are you entering your serial number? I am able to simply download it using the webpage:
EDIT:
You could also try downloading it with direct links:
1. NI Downloader for FPGA Module 2012: http://download.ni.com/evaluation/labview/ekit/other/downloader/2012FPGA-Eng_downloader.exe
2. Installer for FPGA Module 2012: http://download.ni.com/evaluation/labview/ekit/other/downloader/2012FPGA-Eng.exe
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If someone helped you out, please select their post as the solution and/or give them Kudos! -
Hi
I have a project on Spartan 3e with Labview program but I can not install the driver cause of labview 2012 FPGA module
ThanksHi again
Why i can't download the fpga module on this link : http://www.ni.com/download/labview-fpga-module-2012/3088/en/
can anyone send me a link to download the module?
Thanks -
Thanks for the info, Kyle. I will probably try to find an older 32-bit XP machine. VM is just not an option for me right now.
Hello everybody,
I am trying to use the DIgilent Spartan 3E board with Labvew 2012 SP1 32 bit. I am able to compile the example code for LED shift. I am however unable to transfer code to the FPGA. I get the following error message:
Error Code: -310602
NI-COBS: Unable to communicate with device over communication cable.
Please verify that the cable is connected to a supported device and that the appropriate drivers are installed.
My system configuration is as follows:
Windows 7 (64 bit) on Dell XPS laptop.
Labview 2012 SP1 (32 bit)
Labview FPGA 2012 SP1
Labview 2012 FPGA support for Spartan3E
Xilinx 13.4 tools
DEFB LV FPGA 2012sp1 support installer
Xilinx USB cable driver v1.3 installed.
I took all the precautions mentioned by others on this forum and others, mainly that the cable must be disconnected before installing the Xilinx cable driver. All software and drivers were installed correctly. I even uninstalled and reinstalled the entire Labview software set I had. I still get the same error.
A few other questions:
1. Is the Xilinx cable different from a regular USB cable of the same configuration ?
2. When I program the FPGA I only have the USB cable connected between my computer and the Spartan 3e board. Should any other cable be connected ?
3. What should be the correct jumper settings for J1 - JP30 (especially J30, J11, JP9, JP6, JP7, etc) ?
I have been at this or over 3 days trying to figure it out. Any help will be greatly appreciated.
-
Why no NI/Labview 2012 April Fools
NI often has a nice April Fools news announcement why not this year?
I look forward to their pranks and didnt see one this year.
I would vote for Labview 2012 - avaliable in text editing only format for c/c++ programmers
or
SBArdunio release expected - a low cost sbrio to be released in Ardunio form factor battery powered and compatable with all existing shields. SBArdunio features a 100MHz Arm-cortex processor and Xilinx FPGA programmed nativly in Labview RT and FPGA supported.
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGAI would suggest they announce LabVIEW 2012 for OS/2.
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness -
Some fonts are not shown correctly in LabVIEW 2012
I found a bug related with fonts in LabVIEW2012 f3 KR.
- When I select NI7SEG in font selection dialog, right font is not shown in the example box.
- Draw text at point.vi shows same problem for some fonts while other fonts are working.
I reported it to Korean NI. As far as I know, this was not reported in previous versions and I couldn't find any related documents in Google.
So, here I would like to know whether it is related with only Korean version. Please let me know if English version is OK.
* OS: Windows 7 32bit KRJust now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
- Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
- LabVIEW 2010 but on same PC shows correct fonts.
Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
(1st group)
Arial Unicode MS...
Bookshelf Symbol 3....
Windings 3
(2nd group)
@Arial Unicode MS...
@Terminal
(3rd group)
Arial...
Consolas...
Courier...
Licida Console...
NI7SEG...
Verdana -
Issues with windows 7 after Labview 2012 installation
Hi
I am having some issues after installing Labview 2012 on machines running Windows 7. Firstly, after installing a program on a user's machine, the machine sometimes takes 20 minutes to boot up before the user can log on. The 'Please Wait' message appears during this time. This is also the case on the development machine.
Secondly, on the development machine, I am having an issue when trying to run compiled programs created in Labview. When installing, everything works fine but when I go to open the program, it appears on the task bar for a brief period before closing. It does not appear in the task manager either. I have tried this on 2 other machines with windows 7 and Labview installed and still get the same issue.
Any help on these matters would be much appreciated. Thank youHi
Firstly, looking at the issue with the slow Windows 7 boot up time, as Norbert_B suggested the Windows Event Log is a good starting point to find the root of the problem. The following link describes how to launch “Event Viewer” and some common problems:
http://itexpertvoice.com/home/what%E2%80%99s-taking-so-long-how-to-fight-slow-startup-times-in-windo...
Aside from that, if your computer is part of a domain, the problem may be connected with certain Windows Services that start automatically on boot up. I recommend trying the following steps:
Open up “Control Panel” go to “System and Security” then “Administrative Tools” from here launch “Services”.
Sort the list by name and scroll down to “Network Store Interface Service” right click and select “Properties”. Under the startup type dropdown select “Automatic (Delayed Start)”.
Next scroll down to the “WebClient” service again under “Properties” this time select “Disabled” under the startup type.
As for the problem with running LabVIEW executables, I have a few questions:
Do you get any error codes when it closes automatically?
Does this occur for multiple executables or just one in particular?
Does the code run without a problem within LabVIEW?
Have you tried to update LabVIEW?
What hardware are you running?
Without this information I can only think it may be caused by the Windows Data Execution Prevention (DEP) security feature. So you can try the following steps:
Right click on “Computer” and select “Properties”.
Click on “Advanced System Settings” and select the “Advanced tab, then under the performance section click “Settings”.
Click the “Data Execution Prevention” tab.
Make sure it is activated for essential Windows programs and services only, or you have an exception for your EXE.
You may also find the following link helpful on debugging applications:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/debug_apps_dlls/
Let me know if these solve the problems.
Andrew.N
Applications Engineer
National Instruments -
Can I get MJD (date and time) in LabVIEW 2012 SP1?
I need to time stamp my data before sending it to the file. I have been doing this with the standard calendar date and time but MJD is what we prefer to use. How can I get an MJD timestamp in LabVIEW 2012 SP1?
Solved!
Go to Solution.Hello Brad_Henry,
The Format Date/Time String will return the day of the year when the %j argument is used, as per this help document:
LabVIEW Help: Format Codes for the Time Format String
http://zone.ni.com/reference/en-XX/help/371361J-01/glang/codes_for_time_format_str/
If you're looking for the actual MJD, I'm not aware of a built-in function that generates this so you'll probably need to create or find a function to calculate it manually. This should pretty basic arithmetic, and it looks like people have already made a few public examples, the first two search results here look to be just about what you need:
ni.com search:
http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/catnav:ex/q/julian/
Regards,
Tom L. -
Compatibility of LabView 2012 installed on XP with Vision and Trad DAQ
Is LabView 2012 runnung under Windows XP compatible with
A: NI Vision 2011 ?
B: Traditional DAQ 7.4.4 ?This should answer your question:
Windows Version Compatibility with LabVIEW
Compatible Versions of Vision Development Module with LabVIEW and LabWindows/CVI
NI-IMAQ, NI-IMAQdx, NI-IMAQ I/O, and VAS Compatibility with Different LabVIEW Versions
NI-DAQ and LabVIEW Version Compatibility (for Windows)
I would still suggest to have a look at the readme files as well.
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies -
LabView 2012 Security System Main vi's have error 200559
The vi's give errors of 200559 in my LabView 2012 and NI application engineer "John Staskal" told me as "Another good step
is to recreate the VI in your current version of LabVIEW so that you know the error is not caused by upgrading the VI to a newer version of LabVIEW." I did all that, but not resolved.
Their application engineer John Staskal also told me as "In addition to working to resolve the error you may want to pursue is posting on our upgrade forum and asking the community to convert the VI to a current
version of LabVIEW. http://forums.ni.com/t5/Version-Conversion/bd-p/VersionConversion".
I did all trouble shooting steps such as highlight execution, probes, etc as what their application engineer told me and still having error of 200559 in LabView 2012.
I appreciate help from any one.
Ali Tariq Bhatti
Ali Tariq Bhatti
Advice: Some people talk on different issues and abusive against your post because they do not want to help and arguing with you on some other topic. You all will observe and I also observed, so also do not want to mention their name and best way is complaint them to the moderator. If anyone still wants to talk on different issues against the post, other way is to do private message.
~~~Be nice, have faith in ALLAH(God)~~~
Attachments:
NI ELVIS II Security System VIs (2).zip 313 KB
Error 200559.docx 500 KBRavensFan,
I) Yes, I open up the front panel of the Express VI's and probe into them.
2) I use the express vi's, but if you see my attached vi's file. You will see Security System Main vi is the main vi where the program is running and where I am getting the error of 200559.
3) I also attached the word document file, so I am getting error of 200559 in probes 3, 4, and 5 using Export Key Press and Voltage vi's in this post.
4)Do you know, how to convert these my attached vi's to 2011, 2010, 2009, or LabVIEW8.5 version. May be, it fix the problem, or if you know some one to get help from or get chance to use ELVIS II board, so let me know .Your help or any one's help is appreciated.
Advice: Some people talk on different issues and abusive against your post because they do not want to help and arguing with you on some other topic. You all will observe and I also observed, so also do not want to mention their name and best way is complaint them to the moderator. If anyone still wants to talk on different issues against the post, other way is to do private message.
~~~Be nice, have faith in ALLAH(God)~~~
Attachments:
did probes for Export Press and Key vi's file.docx 340 KB -
When will the Ingenia Motion Control Library be available in LabVIEW 2012?
http://sine.ni.com/nips/cds/view/p/lang/en/nid/210877
I get the following error when I try to open an Ingenia example in LabVIEW 2012
1) Does anybody know when this library will be available in LV2012?
2) Are there any other motion control librarys available for LabVIEW?
Patur Sivertsen Vase
www.hfjensen.dkIt looks like the block diagrams have been removed so no version of LabVIEW will be able to open it.
Contact the manufacturer if you need assistance:
www.ingeniamc.com/En/Soporte/Soporte-Tecnico.aspx
English home page:
http://www.ingeniamc.com/En/default.aspx?ChangeLanguage=true
-AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~ -
Only have LabVIEW 2012. Why am I asked to download LabVIEW 2011 SP1 f2 RTE Patch?
Hello,
I recently got a new machine (clean install of Windows 8), and installed LabVIEW 2012, with no other previous versions. However, when I ran the NI Update Service, it listed "LabVIEW 2011 SP1 f2 R(32-bit) Run-Time Engine Patch" as a critical update.
I'm confused; did I accidentally install LV 2011 too?
Thanks
Solved!
Go to Solution.Also, some addons use older RunTime Engines. It is not suprising that you need the 2011 RTE patch.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
What files do I send to be upgraded from LabVIEW 5.1.1 to LabVIEW 2012?
OK. Just to be clear. I am a complete newb to ANYTHING LabVIEW or LabWindows related. I am a programmer, but I have never used any version ever. That said, I am responsible for the upgrade process of getting our old LabVIEW 5.1.1 system up to date. The old system (still running and doing it's job everyday), is an old Windows NT v4.0 SP6 system running LabVIEW 5.1.1. You can just imagine how ancient this is by today's standard.
Have I set the stage properly? I hope so. Newb, Ancient LabVIEW version 5.1.1, Windows NT 4.0, upgrading from 5.1.1 to 2012.
Now here is what I "think" I know about what is required. Because LabVIEW 2012 will not directly read in, process and /or compile LabVIEW 5.1.1 files, I must first open and save the files using an intermediate version of LabVIEW (specifically 8.2.1) to bring the files up to a version that 2012 can handle. I have noticed in reading the Version Conversion forum, that I can attach a zip file of my LabVIEW files and one of the resident Gurus will convert it for me and give them back - quite nice I think.
Now, I have what I think are all of the required LabVIEW vi and llb files that make up this system we have in place, but I want to be sure before I just post a bunch of stuff.
What exactly do I need to zip up and what can I leave out?
Are there LabVIEW vi and llb files in a "project" that are not needed?
Are there any setup/configuration/project specific files I need to include?
Are there any limitatations to this conversion process that I need to be concerned with - such as various toolkits/suites/modules that may have been used but are no longer supported?
Secondly, I am not really comfortable with posting my vi and llb files for the world to see (and possibly use) as I am not the owner of said modules, just the user/future developer who will be responsible for insuring they stay up to date. Is there any way I can send my files to a specific NI guru via email instead of just posting them?
Solved!
Go to Solution.So if I understand you correctly, all I really need to do is to get LabVIEW 8.2.1, and update my .vi, .lib, and any .ctl files to that version.
Is it a simple matter of just opening the files and hitting something like SAVE AS, or just SAVE and it will do this? Once done, LabVIEW 2012 will then allow me to open them and do what I need to do? Do I have to save them into LabVIEW 2012 first, or is that automatic when I try to recompile them?
When I get a copy of LabVIEW 8.2.1 (eval version), do I have to get all of the pieces (modules, toolkits, etc.) in order to update the 5.1.1 files? Based on what is installed on that NT v4.0 system, we have the following items installed:
NI VISA
NI ComponentWorks 3D Graph
NI DataSocket
NI LabVIEW 5.1.1 Advanced Analysis Library
NI LabVIEW RTE 5.1.1
NI LabVIEW v5.1.1
NI Measurement and Auto Explorer 1.1
NI-488 2.1.60
NI-DAQ 6.6
NI-PAL 1.3.110
NI-Reports
NI-VXI/VISA
You mention DAQ. Our program uses NI DAQ v6.6 now. I have LabVIEW Developer 2012, so I just download the DAQ files for it and it will replace the NI DAQ v6.6 library files we use now?
Thanks for your help so far. If we had a support contract in place, this wouldn't be an issue. However, as I stated, I am not the owner of the files, just the currently assigned caretaker, and part of my task is to get from where we are now on this ancient hardware/software platform, to the latest and greatest. However, I am specifically not allowed to just place the files on a public forum for all to see. It just isn't done. We can send them to a known location and a known entity, but not to just anyone/anywhere as a public forum is by its very nature.
I know there is nothing you guys can do if I cannot give you the files, but thanks for helping me to do it myself. Getting an eval copy of 8.2.1, et. al is probably what I have to do here. -
Vlm 3.0 LabVIEW 2012 SP1 disabled in Installer
Hello folks,
i have a Problem with die build Installer with my new updatet vlm 3.0.
I already get the the new license file for vlm 3.0 and installed it, then i made the installer for
LabVIEW 2012 SP1 like i have done it with the previous versions of LabVIEW 2009 2010 2011
In the produkt list of the installer LabVIEW and the DriverDVD is disabled by default (see Screenshot).
Solved!
Go to Solution.Today i was looking on the server and i have seen that the licenses are LabVIEW 2012 licenses.
I want to install LabVIEW 2012 SP1.
So that's normal, i think i have to wait until i get the new license file for the new version.
Thanks BRennhofer for this idea.
I will report here.
Maybe you are looking for
-
Hi Experts, how to map promotional items with sales employee wise. and what is the difference bet sample and promotional items Regards, Amar
-
International Characters Turn to ?'s
I'm using Kodo 2.5.4 with MySQL. Any international characters (such as "__") in MySQL get translated to a "?". Thanks for any clues on how to prevent this - Sam
-
Adobe Connect 8 attendee can not see breakout room layout, why?
-
Adjusting and "Synchronizing" Icon Size
The standard icon size for files on the desktop and in windows is 48x48. However, some of the folders that I copied over from my old computer has a smaller size of icons (I think 36x36). Is it possible to set the size of every icon in every window on
-
I keep getting it to connect but the phone contines to search and drains battery.