Fpga unexpected error reported from new vi wizard

When i use the new vi wizard , select a new fpga project -> R-series on RT pxi -> create new system
I get a pop up saying unexpected error. I have tried a repair to no avail. I have LV2010 and am looking to use a PXI-7813R
many thanks in advance
Please remember to accept any solutions and give kudos, Thanks
LV 8.6.1, LV2010,LV2011SP1, FPGA, Win7

Hi joedowdle,
Sorry to hear that you're having issues creating an FPGA project.
To prevent this error occurring, it seems that one option that has previously been successful, was to uninstall and reinstall LabVIEW and the additional modules. I do appreciate that this would be rather time consuming, so I would like to try some additional troubleshooting steps with yourself first.
Have you been able to successfully create a standard LabVIEW project without it crashing? If so, could you please try to manually add your R-series card to it please? 
On a similar note, are you able to successfully run an R-series example project? You can find one of these through LabVIEW >> Help >> Find Examples. And in the example finder go to Hardware Input and Output >> R Series >> Basic I/O, then select an example.
There are some additional steps that I'd recommend having a look at, in the R-Series user manual which I think is really useful for both explaining where your hardware should appear in the Measurement and Automation Explorer software (MAX) and how to use an example.
As you mentioned your versions of LabVIEW, FPGA and Real-Time, what version of NI-RIO do you have installed? If this is incompatible with LabVIEW 2011 and the FPGA module, this could potentially be the root of the crash. For LabVIEW 2011, you will need to have version 4.0 installed.
Best wishes,
Tori
Student

Similar Messages

  • Error report from validation

    Hi,
    I used validation in the transformation and pointed to PASS and FAIL. The fail should generate an error report, but where will i find the error report?
    Is it in the management console?
    Appreciate your help.
    Thanks,
    Arun

    Hi Arun,
    If I understood your design, youu2019re using a Validation transform and redirecting the u2018FAILSu2019 to another target. Is that right?
    Well, the statistics for that can be found in the MC, under Data Validation area. But the statistics will be collected only if you set the u2018Collect data validation statisticsu2019 under the u2018Validation Transform optionu2019 found inside the Validation transform (Validation, validation, validation!). This data is collected only for failures.
    Try that and let us know if you manage to find what you need.
    Regards,
    Pedro

  • IR Dashboard report from new query not getting all Quick Filter selections

    I inherited an IR Dashboard .bqy and my user recently added a new Query, Result, Table, and Report section to it. I cannot get the report to dynamically filter based on the date chosen in the existing Quick Filters section. It seems to be filtering the Location properly (drop down in Quick Filters section), but not the date. Her result section refuses to show anything less than ALL dates from the query.
    The other reports/pivots already on the dashboard work fine with all QuickFilters.
    In my attempt to integrate her new report in to the dashboard I add a new hidden "dummy" pivot (based on the existing query btw, not the new query-could that be the issue? it's dummy though so i figured it was ok), reference this pivot in the Embedded Targets object I found by adding "Object~Pivot4|Type~9|Target~Casket Margin Summary" line,
    went to Dashboard Studio and was able to Associate this report in to the right frame, etc.
    In the script behind the QIQ date "Set Filters" button I saw this code for the existing "Result_Detail" section so I added a line for my new "Results_Merch Detail" section.
    var objServDate = ActiveDocument.Sections["Casket Margin"].Shapes["Service_Date^qiqlbx^showname^a"];
    if (objServDate.SelectedList.Count > 2){
         Alert("Please select only two dates");
         return;
    ActiveDocument.Sections.Item(txlMe.Text).Qiq_onControlClick(this.Parent,this)
    ActiveDocument.Sections["Results_Merch Detail"].Limits["Service Date"].Operator = 11
    ActiveDocument.Sections["Results_Detail"].Limits["Service Date"].Operator = 11;
    I tried it with and without an extra semi-colon at the end of my line. Is that the right way to tell it to apply it to more than 1 Result??
    Worked with this for hours now and can't find whatever else is hidden which tells the QIQfIlter Date to refresh this NEW query/result when chosen.
    I tried to make sure all Filter items exist in the new query's Request line, one was missing. i haven't gone back to Dash Studio since then and re-saved, does THAT matter? I saved the .BQY and re-processed, still no luck.
    can anyone help? I'm desperate for suggestions.
    Thank you!
    Karen

    This has been resolved. The main thing that kept it from working was I kept launching the Dashboard Studio after I was in Design mode so any time I got to the QIQ Filters setup screen it looked like cryptic code and there was nothing to alter or play with to try and force the filters to take effect, so I never changed anything.
    This time I launched the Dashboard Studio while accidentally in regular mode, blessing in disguise. on Step 1 of the wizard I chose QIQ Filter Properties from the configuration drop down list which pops up the Local Filters setup window, now in place of code syntax there was english-like words & action items for me to play around with so I chose my new result set from the drop down list and highlighted all the limits and clicked "Set Filters". Presto, that did it.
    Also I had to make sure all the columns referenced in the QIQ drop down lists and pick list was in my request line in the Query & Result section, repeat the above, and it's all working great now.
    Thanks,
    Karen

  • "unexpected error" shutdowns from Microsoft Office -- a serious problem?

    Hello.
    I have a brand new MacBook. I recently installed Microsoft Office 2003 on it. Most of the time everything works fine but usually once a day an application just quits. It's not a problem for me to open it up again but I'm concerned that, if my computer is acting up when it is so new, what's going to happen when my warranty runs out!
    Do I need to have it serviced? I live in a place with no mac store so it's a big decision for me to "send it in for servicing" (e.g., ship it away for a few weeks). I really don't want to do that unless it is necessary.
    Thanks for your help!

    HI Eva,
    You indicated the Microsoft Office is a 2003 version. Might not be compatible with Mac OS Leopard. Check the Microsoft site. You might have to upgrade your Word software in order for it to work.
    Check the boot disk for errors just in case. Restart your Mac while holding down the C key, pressing the power button and inserting your restore disk all at the same time. An Installer window will open, but do not proceed with any installations. Instead, from the Menu Bar, select Utilities > Disk Utility. In the Disk Utility window click First Aid, and then click Verify. If Disk Utility reports errors, click Repair. When Disk Utility is finished, from the Menu Bar, select Utilities/Startup Disk. Select MacintoshHD 10.x.x and click Restart.
    Carolyn

  • Error reported from DirectoryService hangs syslog and computer

    I am getting an odd behaviour from my Mac. I recently had an issue with Eclipse and had to hard switch the computer, since it hang all the machine.
    When booting again, whenever I start Eclipse, I get the same behaviour. CPU gets high, to 80-90%, processes DirectoryService and mDNSResponder are the most active, and messages starts to run to the syslog. The message is:
    ++++++++++++++++++
    Dec 3 16:37:20: --- last message repeated 499 times ---
    Dec 3 16:37:20 machine DirectoryService\[ 11 \] : * process 11 exceeded 500 log
    message per second limit - remaining messages this second discarded *
    Dec 3 16:37:20 machine DirectoryService\[ 11 \] : dnssd_clientstub deliver_reques
    t: socketpair failed 24 (Too many open files)
    ++++++++++++++++++
    It seems the dns service is not operating correctly, but I don't know the cause.
    Message was edited by: miceno

    Why is it related to Spotlight? From http://www.westwind.com/reference/OS-X/background-processes.html:
    DirectoryService: This process acts as a central clearinghouse for "Directory" information -- mainly users/groups/authentication, and service location (e.g. file servers, printers, etc). It gathers information from a variety of plugins (NetInfo, LDAP, Active Directory, NIS, Bonjour/Rendesvous/, AppleTalk, SMB) and hands it out to whatever program requested it.
    I am running Spotlight normally and I did'nt have this problem before. The problem should be something related to DNS, or the like, since mDNSresolver is also generating a lot of activity.
    I have 80 Gb free space in the disk.
    I have run Disk Utility/First Aid to check for errors and do repairs: no problem, no repairs.
    Let DirectoryService etc. run for a while when all is well to re-index for Spotlight: done
    Exclude any resources in System Prefs/Spotlight so that time isn't spent combing thru them: done.
    Nevertheless, I didn't use Eclipse for a while (these two months) and I almost forgot about the problem. Today, I have just open it again and again, the same problem.

  • Unexpected error from the Operating System

    Hello everyone. I have a PCI 1200 board and I use LabWindows/CVI. I want to
    make a scan on an analog input channel of my board. For this, I tried the
    functions Lab_ISCAN_Op, nidaqAIScanOp and DAQ_Op, and for all of them, the
    same error occurs, which is:
    return value == -10856
    with the message:
    osError: An unexpected error occured from the operating system while performing
    the given operation.
    Any hints for me?
    Thanks in advance.
    Yves

    I have similar problem with Error code= --10452 (noIntAvailError: No
    interrupt level is available for use) when I used the Dap_Op() function.
    After checking the system's resources (from Control Panel -> System and
    click on properties to get the system resources used by my Lab-PC-1200 card.
    Win98 has plug and play and so it shows me only the I/O ranges. I forced
    the system to allow the Lab-PC card to use IRQ=3 and DMA=5. This resolve my
    problem and no more Daq_Op() error messages. I hope this will help. Jack
    Sent via Deja.com http://www.deja.com/
    Before you buy.

  • Error declarations for error reporting to the Client

    Hi,
    I am trying to standardize the error reporting from PL/SQL for our project.
    I created a package to define these errors and want to declare them as constants.
    Unfortunately i'm running into some restrictions.
    Option1:
    Declare the ErrCd as a constant (-20000 To -20999) and then use an associative array with the ErrCd as index and the text as the value.
    Option 2:
    Declare a Record type with the ErrCd and ErrText as fields. Associate the errormessage with a position eg errIdx := 1; This will then be the position in the nested table. The procedures will then reference the correct errorRec through the ErrIdx.
    The problem is that i want to do all this in the package spec. I don't want to work through a function to first build up the table and then return the correct error record etc.
    I cannot build the associative array in the declaration since it doesn't have a constructor.
    Nested tables seemed like the one to use since i could build up its content through its constructor. But i cannot construct the errRecord in a similar way.
    SUBTYPE ErrIdxType    IS INTEGER;
      SUBTYPE ErrCdType     IS INTEGER;
      SUBTYPE ErrTxtType    IS VARCHAR2(300);
      ERR_CD_BASE           CONSTANT ErrCdType := -19999;
      ERR_CD_MAX            CONSTANT ErrCdType := -20999;
      TYPE ERR_REC IS RECORD
        errCd   ErrCdType,
        errTxt  ErrTxtType
    -- Error 1 tester
      ERR_ERR1_IDX        CONSTANT ErrIdxType := 1;
      ERR_ERR1_CD         CONSTANT ErrCdType  := ERR_CD_BASE - ERR_ERR1_IDX;
      ERR_ERR1_TXT        CONSTANT ErrTxtType := 'Error ERR1 occured.';
      -- Error 2 tester
      ERR_ERR2_IDX        CONSTANT ErrIdxType := 2;
      ERR_ERR2_CD         CONSTANT ErrCdType  := ERR_CD_BASE - ERR_ERR2_IDX;
      ERR_ERR2_TXT        CONSTANT ErrTxtType := 'Error ERR2 occured.';
      TYPE ErrTableType IS TABLE OF ERR_REC;
    errTable ErrTableType :=
        ErrTableType
          ERR_REC(ERR_ERR1_CD, ERR_ERR1_TXT),
          ERR_REC(ERR_ERR2_CD, ERR_ERR2_TXT)
        );I suppose the java still has a strong grip on me here.
    What is the correct way to manage these error definitions?
    Since i am trying to establish the error/exception handling strategy for the project i would also greatly appreciate a couple of pointers to examples/packages/docs on the error /exception reporting mechanisms available.
    Thanks
    Buks

    That looks like data to me. Now if only PL/SQL had some kind of a database that came with it so you put that data in a table ;)
    Error messages change and so are not good candidates for constants. What you could find useful to declare in a package is some exceptions. You will find more about them in the PL/SQL Guide.
    You should also check this series of Oracle Magazine articles written by Steven Feuerstein (Whom God Preserve).
    Cheers, APC

  • IPod nano had unexpected error syncing

    Hi
    Yesterday whilst syncing my iPod Nano 5G with iTunes 10.3, I recieved an unexpected error message from iTunes telling me that nine files had corrupted and that my device needed to be restored. I have not restored the device yet but now whenever I connect my iPod to my PC windows asks me to scan the device for corrupted files and iTunes asks me to restore.
    If I Restore the iPod will I lose the built in games that were on the device when I purchased it or any other important data which can't be retrieved afterwards?
    Thanks

    Update: After again repeating the 5Rs (instead of re-install, downloaded latest version of iTunes which prompted for "repair" rather than "install"), a message asking me if I wanted to update my iPod software came up. I accepted, and following the install was able to sync without the "corrupted" message. Of course when the sync was finished, I tried to play my iPod and noticed that there was no music on it (so in fact the sync hadn't really worked). Since then, all I get when connecting the iPod is the "corrupted" message, even after another reset.
    Suggestions?

  • ITunes - Not Opening Up Again - Error Report

    Hi,
    I've been reading some of the older threads who have had the same problem. This just started today. I've had iTunes 6.1 for about a week now. I've disabled my Mcafee and have done "clean" uninstalls of all iTunes software, installed standalone quicktime and iTunes still won't open. Can someone help me? Here is the error report from Windows:
    <?xml version="1.0" encoding="UTF-16"?>
    <DATABASE>
    <EXE NAME="iTunes.exe" FILTER="GRABMIFILTERPRIVACY">
    <MATCHING_FILE NAME="CDDBControlApple.dll" SIZE="495616" CHECKSUM="0xC921E862" BINFILEVERSION="2.0.0.11" BINPRODUCTVERSION="2.0.0.11" PRODUCT_VERSION="2, 0, 0, 11" FILE_DESCRIPTION="CDDBControl Core Module (Apple)" COMPANY_NAME="Gracenote (formerly CDDB, Inc.)" PRODUCT_NAME="CDDBControl Core Module" FILE_VERSION="2, 0, 0, 11" ORIGINAL_FILENAME="CDDBControlApple.DLL" INTERNAL_NAME="CDDBControl" LEGAL_COPYRIGHT="Copyright 1999 - 2003" VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTOBIN_FILEVERSION="2.0.0.11" UPTOBIN_PRODUCTVERSION="2.0.0.11" LINK_DATE="07/30/2003 17:41:06" UPTOLINKDATE="07/30/2003 17:41:06" VER_LANGUAGE="English (United States) [0x409]" />
    <MATCHING_FILE NAME="iTunes.exe" SIZE="10996224" CHECKSUM="0xE4B5FCE4" BINFILEVERSION="4.6.0.15" BINPRODUCTVERSION="4.6.0.15" PRODUCT_VERSION="4.6.0.15" FILE_DESCRIPTION="iTunes" COMPANY_NAME="Apple Computer, Inc." PRODUCT_NAME="iTunes" FILE_VERSION="4.6.0.15" ORIGINAL_FILENAME="iTunes.exe" INTERNAL_NAME="iTunes" LEGAL_COPYRIGHT="&#169; 2003-2004 Apple Computer, Inc. All Rights Reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTOBIN_FILEVERSION="4.6.0.15" UPTOBIN_PRODUCTVERSION="4.6.0.15" LINK_DATE="06/04/2004 12:35:54" UPTOLINKDATE="06/04/2004 12:35:54" VER_LANGUAGE="English (United States) [0x409]" />
    <MATCHING_FILE NAME="iTunesHelper.exe" SIZE="286720" CHECKSUM="0xEE1A6CCC" BINFILEVERSION="4.6.0.15" BINPRODUCTVERSION="4.6.0.15" PRODUCT_VERSION="4.6.0.15" FILE_DESCRIPTION="iTunesHelper Module" COMPANY_NAME="Apple Computer, Inc." PRODUCT_NAME="iTunes" FILE_VERSION="4.6.0.15" ORIGINAL_FILENAME="iTunesHelper.exe" INTERNAL_NAME="iTunesHelper" LEGAL_COPYRIGHT="&#169; 2003-2004 Apple Computer, Inc. All Rights Reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTOBIN_FILEVERSION="4.6.0.15" UPTOBIN_PRODUCTVERSION="4.6.0.15" LINK_DATE="06/04/2004 20:38:10" UPTOLINKDATE="06/04/2004 20:38:10" VER_LANGUAGE="English (United States) [0x409]" />
    </EXE>
    <EXE NAME="kernel32.dll" FILTER="GRABMIFILTERTHISFILEONLY">
    <MATCHING_FILE NAME="kernel32.dll" SIZE="983552" CHECKSUM="0x4CE79457" BINFILEVERSION="5.1.2600.2180" BINPRODUCTVERSION="5.1.2600.2180" PRODUCT_VERSION="5.1.2600.2180" FILE_DESCRIPTION="Windows NT BASE API Client DLL" COMPANY_NAME="Microsoft Corporation" PRODUCT_NAME="Microsoft&#174; Windows&#174; Operating System" FILE_VERSION="5.1.2600.2180 (xpspsp2rtm.040803-2158)" ORIGINAL_FILENAME="kernel32" INTERNAL_NAME="kernel32" LEGAL_COPYRIGHT="&#169; Microsoft Corporation. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0xFF848" LINKER_VERSION="0x50001" UPTOBIN_FILEVERSION="5.1.2600.2180" UPTOBIN_PRODUCTVERSION="5.1.2600.2180" LINK_DATE="08/04/2004 07:56:36" UPTOLINKDATE="08/04/2004 07:56:36" VER_LANGUAGE="English (United States) [0x409]" />
    </EXE>
    </DATABASE>

    Go here. dp what, "ITUNES WON'T OPEN", 08:53pm Oct 26, 2005 CDT First, try my first post about SC Info. If that doesn't work, proceed to my second which also has a possible remedy for your problem. Also, where the **** did you get that error report?

  • Error report form iTunes Store: Missing Nib File

    After having uploaded the .zip-file to the iTunes Store (update of an existing app), I got the following error-report from the iTunes store: Missing Nib File - The referenced nib file "MainWindow.nib" was not found in the application bundle. Is it possible that this error occurred while creating the app in the Adobe app builder or where do I have to look for this error? The first uploading of the original app worked without an error. What do you recommend me?
    Thank you very much for an answer.
    Ueli Mattenberger, VMA Media AG, Switzerland

    See http://forums.adobe.com/thread/1277293 and http://status.adobedps.com/ for information on this issue.
    Neil

  • Event Viewer Error Reports

    How do I send all my event viewer error reports from 3/1/15 to the manufacturer of my computer? IN the event viewer window there seems to be a lock on opening submenu to perform a copy and paste or a SEND option available. I have a WINDOWS 8.1
    OPERATING SYSTEM.

    You should be able to right click on each indivudual log "App, Sec, Setup, System, etc" and click on Save all events as.

  • How can we transfer error report

    Hi!
    experts,
    how can we transfer error report from a BAPI to the application server? as i am collecting the error report from the BAPI ?

    You can use the following code in your program for your ref:
    REPORT ZEX_DATATOFILE .
    *& ABAPLOVERS: Data Transfer
    Parameters to enter the path
    PARAMETERS FILENAME(128) DEFAULT '/usr/tmp/testfile.dat'
                             LOWER CASE.
    Table Declaration
    DATA: it_return type table of  BAPIRET2.
    Data Declaration
    DATA D_MSG_TEXT(50).
    populate DOCUMENTHEADER and pass to BAPI
    *You can call your Bapi here *
    CALL FUNCTION 'BAPI_ACC_GL_POSTING_POST'
      EXPORTING
        documentheader       = <header>
    IMPORTING
      OBJ_TYPE             =
      OBJ_KEY              =
      OBJ_SYS              =
      tables
        accountgl            =
        currencyamount       =
        return               = it_return
      EXTENSION1           =
    collect all the logs in one internal table
    ENDLOOP.
    Opening the File
    OPEN DATASET FILENAME FOR OUTPUT IN TEXT MODE
                          MESSAGE D_MSG_TEXT.
    IF SY-SUBRC NE 0.
      WRITE: 'File cannot be opened. Reason:', D_MSG_TEXT.
      EXIT.
    ENDIF.
    Transferring Data
    LOOP AT  it_return to wa_return .
      TRANSFER wa_return  TO FILENAME.
    ENDLOOP.
    Closing the File
    CLOSE DATASET FILENAME.
    Regards
    Dhirendra
    Edited by: dhirendra pandit on Jul 7, 2009 1:55 PM

  • Need help with an error report

    Attached is an error report from a VI that normally crashes with Error Checking set to Default in the VI's LCFN configuration dialog box. Can't debug it when it crashes; LabWindows CVI comes up for debug but CVI crashes too.
    The attached error report was only available after setting Error Checking to 'No Error Checking'.
    Any ideas what's going on with this DLL function called by the LCFN?
    Platform: Windows 7-32 + LV2013 Pro SP1-32.
    Jeff
    Jeffrey Bledsoe
    Electrical Engineer
    Solved!
    Go to Solution.
    Attachments:
    1607b431-02ef-4672-a138-c2ebc4a16c2b.zip ‏20 KB

    Connor,
    Sorry, I meant CLFN.
    This isn't an executable.
    It's good LV2009 code (ran okay with LV2009)  that I'm trying to execute with LV2013. I ran a mass compile on all the VIs.
    I posted this issue a few months ago when using an evaluation copy of LV2013 but have only recently begun looking at it again after I installed our purchased copy of LV2013.
    I can prevent LV crashes from this VI by changing its calling convention from "C" to "StdCall." However, the value returned from the DLL function is invalid. While the DLL function returns an invalild value, I added "unbundle by name" VIs to the error stream on the input and the output of the CLFN. Results: the error 'code' at the input and the output of the CLFN = 0.
    The supplier of the DLL said the DLL functions are written in either C or C++. I've found notes at ni.com that indicate a "Wrapper DLL" (written in C) might be required to provide a "C to C++" translation  interface between the CLFN and the DLL functions.
    Another approach I've found on ni.com appears to be replacing the CLFN with a Code Interface Node (CIN) having C code to interface LV with the C++ code of the DLL function, thus eliminating the CLFN.
    There are also some notes on ni.com concerning CLFN settings causing crashes in the LV2009 to LV2010 transition; apparently, other changes between LV2010 and LV2013 are causing my issue.
    The supplier of the free DLL now has a LV developers kit  (for purchase) that might solve these issues but we can't go that route.
    Thanks,
    Jeff
    Jeffrey Bledsoe
    Electrical Engineer

  • Import Error  - application from apex 3.2.1 imported into  3.2.0

    Hi,
    I try to import 2 application from apex 3.2.1 into 3.2.0
    First (open application) - working without login in - was imported with success.
    Secound one - witch working with APEX user autentication - I could not install.
    Current Workspace:      S_WORKSPACE
    Export File Workspace:      S_WORKSPACE
    Export File Workspace ID:      1021311098347247
    Export File Application ID:      107
    Export File Version:      2009.01.12
    Export File Parsing Schema:      SY
    Application Origin:      This application was exported from the current workspace.
    I get only error report from instalation process:
    ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: linia 90, kolumna 32: PLS-00201: identyfikator 'MUST_NOT_BE_PUBLIC_USER' powinien być zadeklarowany ORA-06550: linia 39, kolumna 1: PL/SQL: Statement ignored &lt;pre&gt;declare a1 varchar2(32767) := null; begin a1:=a1||'select'||chr(10)|| 'a.KODARTYKULU as KODARTYKULU ,'||chr(10)|| '''&amp;lt;b&amp;gt;''||a.KODARTYKULU||''&amp;lt;/b&amp;gt;'' as KODARTYKULU_NR,'||chr(10)|| 'a.KODARTYKULU as DoAutorow,'||chr(1
    How can I install aplication?
    Please help me,
    Mark

    In SQL-Developer connect to your Apex's schema and open the schema browser (you should see it on the sidebar with options : tables,views,indexes etc..). Within that you can see "Application Express" (its further down after the usual DB object groups), expand that and you should see your applications.
    Right click on the Application Name and choose export DDL -> Save to file.

  • Fault bucket -Windows Error reporting

    Fault bucket 3981204210, type 5
    What does type 5 signify?
    TIA, Gerry

    Hi,
    I found this WIKI
    Event ID 1001: Windows Error Reporting, from this article I see a sentence:
    The bucket table (that is,
    the Fault bucket type) for phony error bucket numbers is 5.
    The article above also gives an explanation for type 1 to 4:
    1:Crash32 buckets
    2: Setup buckets
    3: Crash64 buckets
    4: Generic reports
    Hope this might help
    Best regards
    Michael Shao
    TechNet Community Support

Maybe you are looking for