FPM Develepment :Error in defining a generic Cc in App properties - NW04s

Hi ,
I am developing a custom component using the FPM framework in ERP 2005.
In Application properties , if i define the properties related to Configuration component as my Cc , the application works fine.
But as per ERP 2005, it is mentioned that we have to define the generic Cc in application properties. (sap.com/pcui_gp~xssutils).If i do this , i get an "NullPointerException" . This error seems to occur when it tries to load the component. What am i missing here.
And what should be defined for sap.xss.BaseConfiguration. I have come across a post saying there is a seperate "cfg " component for standard DCs .. which has these properties defined.
It would be immensely helpful , if someone could throw light on this..
Thanks and Regards
Bharathwaj

Hi Mark,
It is not related to ERP upgrade. I am developing the component in Nw04s(ERP 2005)
It is more specific to FPM components. I guess , i have to post it in ERP-HCM/WebDynpro.. there are no specific forums for FPM as such..
Thanks ,.
Bharathwaj

Similar Messages

Error while defining a warehouse as Bonded Store

Hi All
I am getting one error while defining a OPM Warehouse as Bonded Store in OPM Inventory Module under Warehouse Attributes.
The error is 'APP-JA-460778: This Warehouse does not have a Parent Organization defined in Oracle Financials'. Can any one tell me where i missed the setup part of defining a parent organization in Financial Module. We are on OPM 11i EBS.
Thanks in advance
Prem.

I think you are using India Localization. Sorry, I don't have any knowledge in that area.
I got following information about how to setup Organization/Warehouse. And it says that any deviation from this may result in error. Check if you are following all the steps required for defining warehouse and organization.
Please ensure that the following setups are done exactly as mentioned below:
1) Create an OPM organization in OPM System Administration using OPM Organization Screen eg. ‘PM1’
2) Create a Location using ‘HR Locations’ form with the same name as the OPM Organization (eg. PM1)
3) Create an Inventory Organization using the form ‘HR Organizations’ with the same Organization Code as the OPM organization Code created in step 1. (Additional Identification details of the Organization could be given after a colon (:) in the Organization Name – Eg. ‘PM1: Vision Process India Mumbai’). Make this Inventory Organization as ‘Process Enabled’ and in the ‘Process Organization’ field, refer to the OPM Organization. Attach the HR Location created in step 2 to this Inventory Organization.
4) On saving the Inventory Organization record, the system shall automatically create a Warehouse with the same name in OPM under the OPM organization. (eg.PM1)
5) Query the Location ‘PM1’ and attach the Inventory Organization ‘PM1’ to it.
6) Go to Organization Additional info in OPM System Admin – Create a record for ‘PM1’.
Enter the EC Code for this Organization, as this is the Excise Licensed Organization. After saving
the record here, an automatic entry is created in India Local Inventory – Organization Additional Information for the Inventory Organization.
7) Go to India Local Inventory Org Additional Info and query for this Organization (it will be visible without location). DO NOT mark this as Master Organization.
8) Add another record for the Organization with Location (eg. PM1)
9) Check the 'Master Org' flag for this combination of Organization and Location.
B: Warehouse :
1) Create an Inventory Organization in India Local Inventory corresponding to the Warehouse in OPM (eg. ‘WSH’). Make this as ‘Process Enabled’ and give the ‘Process Organization’ as the
OPM Organization created earlier (PM1), which is the Process Organization this Warehouse is going to report to.
2) Create location (WSH-With the same name as the Warehouse Code) in India Local Inventory and attach it to organization ‘WSH’ in India Local Inventory
3) System automatically creates Warehouse ‘WSH’ in OPM under the OPM organization (PM1)
4) Using the ‘Warehouse Attributes’ form, classify this Warehouse as Bonded/Trading/OSP
5) Go to India Local Inventory Organization Additional Information form and create a record ‘WSH’ giving the Master Organization as ‘PM1’ (actually this is referring to the combination of PM1 with Location
PM1 as Master Organization) . Add another record for the same Org ‘WSH’ with Location ‘WSH’
with Master Organization as ‘PM1’. Please ensure that the EC Code is exactly same as the Master Organization.
6) Optionally ensure that in the Register Priorities, highest priority (1) is set against PLA.
7) Optionally ensure that Allow Negative PLA Balance Flag is checked.
Also make sure that all objects (triggers, packages etc) that are related to localization are valid.

Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CR...

Post Author: lkamesam
CA Forum: Integrated Solutions
Hi,
I am running Crystal Reports version 10 from IBM Rational 6.0.1 build 20050725_1800 XML data source. When I try to run the report under WAS 6.0.1 I get the following error:
Does any body have any clue how to resolve my problem? Thanks
Error 500: Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CRDB_XMLImpl This is often caused by having the class at a higher point in the classloader hierarchy Dumping the current context classloader hierarchy: ==> indicates defining classloader *** indicates classloader where the missing class could have been found ==>[0] com.ibm.ws.classloader.CompoundClassLoader@163dd786 Local ClassPath: C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\classes;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\bobj_platform_jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cecore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\celib.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ceplugins.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cereports.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cesession.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\clientlogic.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\Concurrent.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CorbaIDL.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLExternal.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLServer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCharting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalContentModels.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExporters.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExportingBase.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalFormulas.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalQueryEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportingCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ebus405.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\icu4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jrcerom.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jsf_common.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\keycodeDecoder.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\log4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\MetafileRenderer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rasapp.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rascore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rpoifs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\serialization.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\URIUtil.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting-jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xercesImpl.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xmlParserAPIs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent; Delegation Mode: PARENT_FIRST [1] com.ibm.ws.classloader.JarClassLoader@338761606 Local Classpath: Delegation mode: PARENT_FIRST [2] com.ibm.ws.classloader.ProtectionClassLoader@38e75786 [3] com.ibm.ws.bootstrap.ExtClassLoader@7e475784 [4] sun.misc.Launcher$AppClassLoader@7e5a5784 [5] sun.misc.Launcher$ExtClassLoader@7e565784 -Original exception- java.lang.NoClassDefFoundError: OCA/OCAdbdll/DbDLLOperations at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code)) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:576) at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code)) at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code)) at com.crystaldecisions.reports.queryengine.driver.i.<init>(Unknown Source) at com.crystaldecisions.reports.queryengine.driver.i.case(Unknown Source) at com.crystaldecisions.reports.queryengine.av.ak(Unknown Source) at com.crystaldecisions.reports.queryengine.av.else(Unknown Source) at com.crystaldecisions.reports.queryengine.av.byte(Unknown Source) at com.crystaldecisions.reports.queryengine.av.do(Unknown Source) at com.crystaldecisions.reports.queryengine.as.new(Unknown Source) at com.crystaldecisions.reports.queryengine.at.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source) at com.crystaldecisions.reports.common.ab.a(Unknown Source) at com.crystaldecisions.reports.common.ab.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown Source) at com.crystaldecisions.report.web.a.a.K(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.bx.a(Unknown Source) at com.crystaldecisions.report.web.event.b1.broadcast(Unknown Source) at com.crystaldecisions.report.web.event.as.a(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.if(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source) at com.crystaldecisions.report.web.ServerControl.a(Unknown Source) at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ServerControlTag.doEndTag(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown Source) at com.ibm._jsp._sample._jspx_meth_crviewer_viewer_0(_sample.java:135) at com.ibm._jsp._sample._jspService(_sample.java:77) at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:88) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1212) at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:629) at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:117) at com.ibm.ws.jsp.webcontainerext.JSPExtensionServletWrapper.handleRequest(JSPExtensionServletWrapper.java:171) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:230) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2837) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) at

For those who would have the same problem, here is how I could eventually fix it.
Since the Flex Test Drive is sometimes out of sync with flash builder 4, I recreated a project using other help pages on Adobe site :
Entry point :
http://help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08- 7ffd.html
As suggested, I used the New Project wizard to create a new project, with :
Application server type : J2EE
Check the radio button "Use remote object access service : BlazeDS"
Then, as indicated in following pages (section "Accessing BlazeDS")... :
file:///C:/Mes%20documents%20C/Commun/Developpement/Documentation/HT-Tracks/AccessingData/ help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08-7ffe.ht ml#WSbde04e3d3e6474c4-19a3f0e0122be55e1b7-8000
...I selected the "Data / Connect to Data/Services..." menu option, which started the Data/service connection wizard.
There, I selected a BlazeDS (and not Web Services) service type, and everything went fine.
Suggestion to adobe staff : maybe it would be useful to update the Flex Test Drive to reflect Flash Builder 4 ?
Very nice product anyway, so far, congratulations...
Rgds
Marc.

DECODE SQL Function - Parsing error in Defining Objects in Universe Designe

Hi,
I have created a class and an object in BO XI R3 Universe designer.
I am getting the parsing error while defining the object when using the custom SQL as
select decode(matteraction,null,decode(matterissue,null,'MATTER','ISSUE'),decode(matterissue,null,'TYPE IS ACTION',' ACTIONu2019)) as TYPE from wh_cf_cmsu
The object Type is "character", i have tried with Long Text, Number, Date as well and the same sql works fine by returning String values through TOAD.
Do we have any constrains in using DECODE in BO XI R3 or any other syntax please....
Please guide me in resolving this issue.
Thanks,
Karthik.

Hi,
1.At back end check the data type for matteraction column and define it accordingly in object definition.
2. Try to break your select clause definition into smaller parts and check it where the exact issue is as below
i.select decode(matterissue,null,'TYPE IS ACTION',' ACTIONu2019) ............
ii.select decode(matteraction,null,decode(matterissue,null,'MATTER','ISSUE') ..........
iii.select decode(matteraction,null,decode(matterissue,null,'MATTER','ISSUE'),decode(matterissue,null,'TYPE IS ACTION',' ACTIONu2019)) as TYPE from wh_cf_cmsu

JPub Error User-defined type not found

I just have found about Jpub could help me with my problem, so i try it, but when i try to publish a package it gives me this error:
J2T-118, ERROR: User-defined type "ADMCAD.PKG_CONSULTA_BR_NOME.TAB_ELEITOR" was
not found in the database
This is the package:
create or replace package admcad.pkg_consulta_br_nome as
VT_NUM_INSCRICAO VARCHAR2(12);
VT_COD_SIT_ELEITOR NUMBER(2);
VT_NOM_ELEITOR VARCHAR2(70);
VT_DAT_NASC NUMBER(8);
VT_NUM_ZONA NUMBER(4);
VT_SGL_UF VARCHAR2(2);
-- tipo que sera retornado
TYPE REC_TAB_ELEITOR IS RECORD (
          NUM_INSCRICAO VT_NUM_INSCRICAO%TYPE,
          NOM_ELEITOR     VT_NOM_ELEITOR%TYPE,
          NOM_PAI     VT_NOM_ELEITOR%TYPE,
          NOM_MAE     VT_NOM_ELEITOR%TYPE,
          DAT_NASC     VT_DAT_NASC%TYPE,
          DAT_DOMIC_MUNIC     DATE,
          COD_SIT_ELEITOR     VT_COD_SIT_ELEITOR%TYPE,
          SGL_UF     VT_SGL_UF%TYPE,
          NUM_ZONA     VT_NUM_ZONA%TYPE);
TYPE tab_eleitor IS TABLE OF REC_TAB_ELEITOR INDEX BY BINARY_INTEGER;
TYPE cursor_consulta IS REF CURSOR;
SUBTYPE T_NUM_INSCRICAO is VT_NUM_INSCRICAO%TYPE;
SUBTYPE T_COD_SIT_ELEITOR is VT_COD_SIT_ELEITOR%TYPE;
SUBTYPE T_NOM_ELEITOR is VT_NOM_ELEITOR%TYPE;
SUBTYPE T_NOM_PAI is VT_NOM_ELEITOR%TYPE;
SUBTYPE T_NOM_MAE is VT_NOM_ELEITOR%TYPE;
SUBTYPE T_DAT_DOMIC_MUNIC is date;
SUBTYPE T_DAT_NASC is VT_DAT_NASC%TYPE;
SUBTYPE T_SGL_UF is VT_SGL_UF%TYPE;
SUBTYPE T_NUM_ZONA is VT_NUM_ZONA%TYPE;
TYPE rec_consulta IS RECORD (
num_inscricao T_NUM_INSCRICAO,
cod_sit_eleitor T_COD_SIT_ELEITOR,
nom_eleitor T_NOM_ELEITOR,
nom_pai T_NOM_PAI,
nom_mae T_NOM_MAE,
dat_domic_munic T_DAT_DOMIC_MUNIC,
dat_nasc T_DAT_NASC,
sgl_uf          T_SGL_UF,
num_zona          T_NUM_ZONA);
procedure prc_consulta (     d01_cod_fon_nome in varchar2,
          d01_cod_fon_mae in varchar2,
          d01_dat_nasc in number,
               d01_qtd_regs out number,
          vtab_eleitor in out tab_eleitor);
end pkg_consulta_br_nome;
This is the command line:
jpub -user=XXX/XXX@there -sql=admcad.pkg_consulta_br_nome
Am I wrong, or jpub was suppose to publish any type in the signature?
Please help.
Rafael Dittberner

Rafael,
I suggest you try asking in the Toplink discussion forum. You can find a link to it from this Web page:
http://www.oracle.com/technology/products/ias/toplink/index.html
Good Luck,
Avi.

Getting error of Defining an internal table with header line, SELECT-OPTIO

Hi all,
i have a coding for my smart form,In this coding i have define an structure which being used,but when i execute it it give me
error of Defining an internal table with header line, SELECT-OPTIONS, and RANGES is not allowed within a structure.Even tough you can see that in my coding im not using SELECT-OPTION or RANGES,but can't understand why it gives me this error.
Following are the code:
DATA: BEGIN OF traptab OCCURS 50.
        INCLUDE STRUCTURE mseg.
DATA: vgart LIKE mkpf-vgart,
        blart LIKE mkpf-blart,
        blaum LIKE mkpf-blaum,
        bldat LIKE mkpf-bldat,
        budat LIKE mkpf-budat,
        cpudt LIKE mkpf-cpudt,
        cputm LIKE mkpf-cputm,
        aedat LIKE mkpf-aedat,
        usnam LIKE mkpf-usnam,
        tcode LIKE mkpf-tcode,
        xblnr LIKE mkpf-xblnr,
        bktxt LIKE mkpf-bktxt,
        frath LIKE mkpf-frath,
        frbnr LIKE mkpf-frbnr,
        wever LIKE mkpf-wever,
      END OF traptab.
Thanks & Regards,
sappk25

thanks

Solaris 10 x86 Jumpstart TFTP error not defined!!!!

I have a solaris 10 jumpstart sparc that does all x86 installs. Until now it has been working fine. I now have to jumpstart two new clients a sun X4200 and an X2100. However I cannot get past the loading of the miniroot. It finds the menu.lst.MACRONAME ok, I see the Solaris 10 jumpstart title and then all I see is a number of dots appearing on the client screen and then nothing.
From the snoop I only get TFTP Error: Not Defined. I have logged a call with Sun but no luck there as yet! Does anyone have any ideas?
Many thanks in advance
Sofia
Message was edited by:
sofiahaaken

Yes, the current x86 miniroot from sol 10 06/06 does not contain all the necessary drivers for the X2100 which is an amd64. So it is either unpacking the miniroot and repacking it with the appropriate drivers that are contained in the SUNWnge package or do the manual install and then add them from the supplementary cd that contains these specific drivers. SUN has recorded the incident and they will fix it with the next releases I have been told.

Error when defining successor of node in workflows

Hi Experts,
I am receiving an error which says "error when defining successor of node XYZ". However in my workflow template, this particular XYZ node does not exists.
Also I found one entry in SWP_SUSPEN table for the main workflow. I tried to execute the report manually RSWWERRE. Still it did not work out.
I also tried to use transaction SWF_ADM_SUSPEND. However my workitem is not showing in the list.
Kindly help me in this issue.
Thanks
Gopal

Hi,
This problem occurs because the nodes system table with respect to workflow is not updated properly. I hope you might have deleted or changed the workflow design after this you need to update the index of the workflow template too.
Follow the below steps
1. Execute PFTC choose task type as Workflow template and open in change mode.
2. On menu goto Addtional Data ---> Agent Assignment ---> Maintain
3. Choose the workflow template ID and click on the icon on the application tool bar with Red and white colur (Football ) i am not sure I think you can try with CTRL + F11 but you hvae to update the index.
After doing this Execute SWUD txn Check for the consistencies of the workflow template. if you do not find any error refresh the buffer and org environment.
Even after doing all this stuff you still face the issue then generate a version just simply insert a dummy step in the workflow activate and then delete the dummy step activate and refresh the buffer and org environment and try to execute.
This error ususally occurs (upto my knowledge) if the nodes table of the workflow is not updated properly, So the above mentioned ways are to deal with it.
Regards
Pavan

How to define a generic structured type (deep structure) w/o LIKE

Hi,
I have been trying to define a generic structured type that would include a component (field) of type "table type".
Look at my type [ty_compatibilite]. It is the structured type that needs to have a component called "mobile" which needs to be an internal table. I have tried to create a genereic table type called tt_mobile (based on ty_mobile) but that did not work. I have not been able to avoid using the LIKE command to make it work.
Any suggestions on how I could define my component "mobile" without using a "LIKE"... ?
Here is my code:
TYPES: BEGIN OF ty_mobile,
          ref_mob_sfr    TYPE zmobil,
          ref_mrq_sfr    TYPE zmarq,
          type_compat    TYPE zsea_comp_type,
       END OF ty_mobile.
TYPES: tt_mobile TYPE STANDARD TABLE OF ty_mobile.
DATA: lit_mobiles TYPE STANDARD TABLE OF ty_mobile.
TYPES : BEGIN OF ty_compatibilite,
          cod_ean        TYPE ean11,
          lib_art        TYPE maktx,
          compat_all_mrq TYPE zsea_comp_gen,
*          mobile        TYPE tt_mobile,
          mobile         LIKE lit_mobiles,
        END OF ty_compatibilite.
TYPES : tt_compatibilite   TYPE STANDARD TABLE OF ty_compatibilite.

define key or use default one:
TYPES: tt_mobile TYPE STANDARD TABLE OF ty_mobile with DEFAULT KEY.
If you don't specify key the type is treated as generic

PL/SQL: numeric or value error: Bulk bind: Error in define

Hello
Does anyone know what this error means?
PL/SQL: numeric or value error: Bulk bind: Error in define
I've checked the cursor and all of the columns are correct.
Any help would be greatly appreciated as this is quite urgent.
Cheers
David

Hello
Here's the top of the function. The exception is thrown on the FETCH...BULK COLLECT line.
FUNCTION f_ps_insert_jlines(ac_JournalRows     IN sys_refcursor,
                                        an_StartLn          IN OUT INTEGER,
                                        at_Monetary          IN OUT pt_monetary_amount,
                                        at_Stats          IN OUT pt_statistics_amount
                                        ) RETURN INTEGER
     IS
          l_jrnl_id                         pt_jrnl_id;
          l_jrnl_line                         pt_jrnl_line;
          l_jrnl_date                         pt_jrnl_date;
          l_Ps_Account                    pt_ps_account;
          l_ps_dept_id                    pt_ps_dept_id;
          l_ps_product                    pt_ps_product;
          l_ps_project_id                    pt_ps_project_id;
          l_statistics_code               pt_statistics_code;
          l_jrnl_ln_ref                    pt_jrnl_ln_ref;
          l_line_desc                         pt_line_desc;
          ln_Index                         INTEGER;
     BEGIN
          FETCH ac_JournalRows BULK COLLECT INTO
                                                       l_jrnl_id,
                                                       l_jrnl_line,
                                                       l_jrnl_date,
                                                       l_Ps_Account,
                                                       l_ps_dept_id,
                                                       l_ps_product,
                                                       l_ps_project_id,
                                                       l_statistics_code,
                                                       at_monetary,
                                                       at_stats,
                                                       l_jrnl_ln_ref,
                                                       l_line_desc;And here is the top of the cursor....
SELECT
                                                  l_char_jrnl_id                         AS journal_id,
                                                 ROWNUM + l_jrnl_Line               AS journal_ln,
                                                  lcr_Journal_Header.Journal_Dt      AS journal_dt,
                                                  ps_account,
                                                  ps_dept_id,
                                                  ps_product,
                                                  ps_project_id,
                                                  statistics_code,
                                                  monetary_amount,
                                                  statistics_amount,
                                                  jrnl_ln_ref,
                                                  line_desc
                                            FROMAny ideas?
Cheers
David
p.s. No idea what has happened to the formatting!

ERROR - 1023001 - No matching region defined for the specified server,app,

Gurus,
I was trying to sync two cubes, basically one has to go to the other.
This is the script
refresh replicated partition 'app2'.'db2' from 'app1'.'db1' at $COMPUTERNAME all data;
However, when I check the logs, I get this error message
ERROR - 1023001 - No matching region defined for the specified server,app,db:
How do we fix this error. When I checked some of the essbase erro docs, I dont find it.
Please help
Thanks

Do you get any additional information in your app log?If so, can you post the message.We run on UNIX (solaris) here and ran into an issue with host-name resolution that turned out to be hostname cache problem. I don't know if you have similar on AIX.

TFTP:Error:not defined

I have a sol10 jumpstart server for x86 sol10 clients. It has been working find until now. I now have two clients an X4200 and an X2100 to jumpstart but I get the following main error after it reads the menu.lst and before it loads the miniroot:
dhcpclient01 -> jstartx86 TFTP Error: not defined^
Any ideas?
Many thanks in advance
Sofia
The snoop output follows
jstartx86 -> lntrs237 TELNET R port=52667 dhcpclient01 -> jsta^M
lntrs237 -> jstartx86 TELNET C port=52667 ^M
jstartx86 -> dhcpclient01 TFTP Data block 78 (1456 bytes)^M
dhcpclient01 -> jstartx86 TFTP Ack block 78^M
jstartx86 -> dhcpclient01 TFTP Data block 79 (1456 bytes)^M
dhcpclient01 -> jstartx86 TFTP Ack block 79^M
jstartx86 -> dhcpclient01 TFTP Data block 80 (1456 bytes)^M
dhcpclient01 -> jstartx86 TFTP Ack block 80^M
jstartx86 -> dhcpclient01 TFTP Data block 81 (1456 bytes)^M
dhcpclient01 -> jstartx86 TFTP Ack block 81^M
jstartx86 -> dhcpclient01 TFTP Data block 82 (1376 bytes)^M
dhcpclient01 -> jstartx86 TFTP Ack block 82^M
dhcpclient01 -> jstartx86 TFTP Read "menu.lst.0100E0815AEB1C" (octet)^M
jstartx86 -> dhcpclient01 UDP D=2072 S=38112 LEN=20^M
dhcpclient01 -> jstartx86 TFTP Error: not defined^M
dhcpclient01 -> jstartx86 TFTP Read "menu.lst.0100E0815AEB1C" (octet)^M
jstartx86 -> dhcpclient01 UDP D=2073 S=38113 LEN=23^M
dhcpclient01 -> jstartx86 TFTP Ack block 0^M
jstartx86 -> dhcpclient01 TFTP Data block 1 (412 bytes) (last block)^M
dhcpclient01 -> jstartx86 TFTP Ack block 1^M
dhcpclient01 -> jstartx86 TFTP Read "menu.lst.0100E0815AEB1C" (octet)^M
jstartx86 -> dhcpclient01 UDP D=2074 S=38114 LEN=20^M
dhcpclient01 -> jstartx86 TFTP Error: not defined^M
dhcpclient01 -> jstartx86 TFTP Read "menu.lst.0100E0815AEB1C" (octet)^M
jstartx86 -> dhcpclient01 UDP D=2075 S=38115 LEN=23^M
dhcpclient01 -> jstartx86 TFTP Ack block 0^M
jstartx86 -> dhcpclient01 TFTP Data block 1 (412 bytes) (last block)^M

Yes, the current x86 miniroot from sol 10 06/06 does not contain all the necessary drivers for the X2100 which is an amd64. So it is either unpacking the miniroot and repacking it with the appropriate drivers that are contained in the SUNWnge package or do the manual install and then add them from the supplementary cd that contains these specific drivers. SUN has recorded the incident and they will fix it with the next releases I have been told.

Error, attribute defined twice: language

Hi All,
Im using JDEV10.1.2 and im compiling the custom JSP and throws the following error.
Error, attribute defined twice: language
Request for the help....
Thanks
Shashikanth

I fail to see how you can not understand that error. It's telling you that language is used more then 1 time. So find the second one and remove it.

Access Sequence - Error while defining it

Hi all,
I am getting the below error while defining a access sequence.
' UNFAVOURABLE SEQUENCE OF FIELDS - POSSIBLE PERFORMANCE PROBLEMS'
Could anyone please help me this..
Thanks,
Arthy

Hi Hegal,
I followed the basic principle. I was trying to define a new access sequence for the pricing conditions...
But I got the error that i reported earlier. I saved it inspite of the error. The access sequence got created but I am not sure if it will give any errors in my pricing procedure while executing the sales order.
Do you think it is some config error?
Thanks,
Arthy

Error when defining successor for node 0000000198

Hello ,
We are using leave request service on ESS portal.
From last few days we are getting error like " Error when defining successor for node 0000000198 "
All agents are assigned properly and also v have checked PFTC setting for Workflow.
the method which are using is Synchrounous.
this error is nt coming perticulary for one employee but it is coming for sick leave workflow.
Please help
thanks

Hi,
This is a binding issue between the workflow container and the task
container because we can see the text in the workflow container but
it is empty in the task container.
Our proposed solution is to go into the Dev or QAS environment and
regenerate the binding between the workflow and this particular task.
We will test and if this works, this will resolve issue.

FPM Develepment :Error in defining a generic Cc in App properties - NW04s

Similar Messages

Maybe you are looking for