FPM Navigation - asking for Log on when calling WebDynpro ABAP Application

Hi Experts,
I want to call a Non FPM based WebDynpro ABAP Application from a FPM Component.
I have followed the method showed in the following thread by Rajkumar to call WebDynpro Application using URL.
[Launch transaction without launchpad|Re: Launch transaction without launchpad]
I could successfully call my WebDynpro ABAP application using this approach,
However when the application opens in new Browser , it asks for log on again.
Can anyone help me to avoid this log in screen.
P.S. --> Both the applications are in the same server.
Regards,
Ashish Shah

Hi Ashish ,
I am also facing the same problem , did you find any solution ?
Thank You,
Aman

Similar Messages

  • Call WebDynpro Abap application with trasaction

    Hello Experts,
    can I call my WebDynpro Abap application with a trasaction ?
    Regards
    sas

    hi,
    Go through this link
    [****************/Tutorials/WebDynproABAP/TransactionCode/Create.htm]
    Hope it will help you.
    Regards,
    Rohit

  • Login pop-up when launching Webdynpro ABAP application from SAP Inbox

    Hello All,
    We have configured our workflow to trigger WD ABAP application from SAP Inbox.
    However when we launch the workitem from SAP Inbox, we are getting a login pop-up screen in IE which prompts us to enter SAP password.
    Can you please help how can we avoid getting that login screen and how the WD ABAP application can single sign on from SAP GUI to IE for that user-id.
    Appreciate all your help.
    Regards,
    Samta.

    Hi Samta,
    You can configure User(RFC) and password for your webdynpro appl'n using SICF tcode.
    Path : /default_host/sap/bc/webdynpro/sap/(your wdp appln)
    Thanks
    Katrice

  • IBook no longer asking for a password when waking from sleep or screensaver

    My iBook was fine until I installed the Security Update 2006-002 via software update. After the "required" reboot (reboot #1) everything functioned as normal.
    On a subsequent reboot (#2) and several other reboots trying to correct the problem (#3-#5) I've found that my iBook no longer asks for a password when coming out of the screensaver, or when waking from sleep.
    Yes, I have checked the security pref panel every time and have ensured the checkbox is checked. I even Sudo'd the panel just to be sure.
    I downloaded the aforementioned security update and re-applied it. It corrected the problem during the same "required" reboot (#1), but after rebooting the computer a 2nd and 3rd time the problem has came up again.
    I wish my iBook wasn't sick! Thanks, I tried searching as best as I could to see if this is a repost.
    iBook G4 1.2 Mac OS X (10.4.5) All updates via Software Update
    iBook G4 1.2   Mac OS X (10.4.5)  

    I don't have a specific fix but this generalized fix seems to take care of most problems for me. Download Cocktail, Onyx or MainMenu then run Rebuild Launch Services database, the maintenance (cron) scripts, clean all caches then Repair Permissions and restart.
    To test it don't keep restarting, that's extra wear and tear on the computer, just put it to sleep and wake it or log out then back in.
    If that doesn't work get Disk Warrior and rebuild the directory.
    And if that doesn't work do an archive and install then one big upgrade.
    But don't go past running one of those three utilities until you see if someone has a better fix for you. It might be as simple as trashing a preferences file.

  • Is there a fix for seeing bolded dates in navigation calendars for shared calendars (when appts have been made on certain dates) as was the case in Office 2003?

    Is there a fix for seeing bolded dates in navigation calendars for shared calendars (when appts have been made on certain dates) as was the case in Office 2003?
    Looks like in 2011 someone posted on the forum that it was being looked into, but has there been a fix?  It's now two years later?
    Thank you!!

    Hi,
    According to your description, it seems that the issue is related to Outlook 2003. This forum focus on Exchange 2013. Additionally, Outlook 2003 is no longer supported in Exchange 2013.
    I suggest we can ask this question in Outlook forums for more professional answers:
    http://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook
    Thanks,
    Winnie Liang
    TechNet Community Support

  • PicDelete and PicLoad asking to save changes when called from SUD

    Hello!
    I'm trying to load different reports, change text values and graphics and export those reports to images. Sometimes I want to remove all reportsheets and load a new layout, but when calling picdelete a messagebox pops up and asks the user whether he wants to save the changes. I'm trying to get rid of that messagebox because my script gets halted and I don't want the user to overwrite my layout.
    This only happens when picdelete is called from a SUD and for the picdelete command this behaviour can be circumvented by using Call Execute("Call picdelete"). Sadly the same procedure does not work for the picload command.
    When called from the DIAdem scripting tab the report is loaded fine but I have found no way to use this command from a SUD without the messagebox appearing.
    Is there a workaround? Does DIAdem 2012 show the same behaviour?
    Edit: I guess I was wrong about that Call Execute("Call picdelete") workaround. I'm seeing the same messagebox. I don't know why I thought that helped.
    Best regards,
    grmume
    PS: I'm using DIAdem 2011

    Hi grmume
    In DIAdem 2012 the behavior is the same. But we have a completely new easy to use object oriented programming interface. There exist a method that reset the modified status of the Report
    http://zone.ni.com/reference/en-XX/help/370858K-01/reportapi/methods/report_method_resetmodified_ire...
    In former versions you only have the readonly variable PicIsChanged.
    But I tried a small script in DIAdem 2011 after changing the layout and it does not ask for saving the layout.
    call PicDelete
    Call picload("Demo.TDR")
     Hope this helps
    Winfried

  • HT5576 iPad is asking for log in code?

    iPad is asking for log in code? I did not set one up?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT1937 I have successfully restored my iPhone 3 gs( Ios )  by itunes. After activation it is asking for activation. When I am going for activation its saying that no SIM card is inserted, but I have already Ufone SIM card is inserted. I checked it with ot

    I have successfully restored my iPhone 3 gs( Ios )  by itunes. After activation it is asking for activation. When I am going for activation its saying that no SIM card is inserted, but I have already Ufone SIM card is inserted. I checked it with other SIM card like Zong etc but the response was same i.e; no SIM card is inserted. It not catching the signals. I am trying to use  my wifi to activate my iphone but it iss not processing then i used itunes to activate by it's again saying that no sim card is detected.
    My all contacts and all data is in this mobile. Now Iam unable to contact anyone. Please help me. How can I sort it out?
    Thank you
    Regards
    Wazir Ali

    Well, if you did it yourself, then there is a chance that you damaged some other component inside the device that is causing your issue. The iPhone's are not user serviceable, and once you have opened the device you have voided any warranty and post-warranty support from Apple. I would try Google to see if you can find any other way to repair your device, as Apple will no longer look at it.

  • Why does my G5 not ask for my pswd when mounting a .dmg when my iBook does?

    i have an app on a disk that i am trying to put on my iMac G5. it opens but does not ask for my password. when i click the installer it goes through a couple stages but then says "there is nothing to open". so, i take this disk and put it in my iBook, it opens and i get the prompt asking for my password, i type it in, click the installer and the app installs no problem. i've opened apps from a disk before on my iMac with no problems. i get the same error response if i use the diskmounter or disk utility. if anyone has any ideas i'd be almost next to eternally grateful.
    cheers.

    To backup your data. So that if you get a new iPhone or your iPhone gets stolen or something like that, all your data will always be safe.

  • Cannot delete the Folder on the desktop after Mavericks update. when I try to delete it, it is asking for logon password, When I give the logon password, it plays a sound of moving to Trash, but the folder still remains on the desktop

    Cannot delete the Folder on the desktop after Mavericks update. when I try to delete it, it is asking for logon password, When I give the logon password, it plays a sound of moving to Trash, but the folder still remains on the desktop
    Please help

    It is a folder which I have created. Name is "SAP".
    I copied some of my office stuff and then deleted the contents inside the folder. But I couldnt delete the folder SAP.
    This is happening after the Mavericks update.

  • Photoshop CS4 has quit asking for quality level when 'Saving As'?

    Windows Vista 64bit  /  CS4 v11
    I had to reinstall CS4 after a hard drive failure. In the new setup,  Photoshop CS4 has quit asking for quality level when 'Saving As'? Help appreciated, IM

    ImageMan II wrote:
    Windows Vista 64bit  /  CS4 v11
    I had to reinstall CS4 after a hard drive failure. In the new setup,  Photoshop CS4 has quit asking for quality level when 'Saving As'? Help appreciated, IM
    It depends on the original format and the destination format of the file.
    PS: You should upgrade to version 11.0.1

  • I just got a new ipad 2 and i can't buy stuff on it asks for security question when my apple id was right why

    i just got a new ipad 2 and i can't buy stuff on it asks for security question when my apple id was right why

    It's a security feature that was brought in a few months ago - when you try to purchase something for the first time on a new computer or device then you will be asked for the answers to your questions (or to set them up if you haven't yet created them).

  • I am no longer being asked for a password when downloading an app, big problem with kids

    I am no longer being asked for a password when downloading an app or music in iTunes, big problem with kids. How do I enable

    To elaborate further, in those restrictions you can specify exactly what types of actions you would like to restrict.
    I think you'll find this accomplishes your objective.

  • I can't get the laptop to start.  I get to the gray linen screen with a gray apple and stop.  It will not ask for log in.

    I can't get the laptop to start.  I get to the gray linen screen with a gray apple and stop.  It will not ask for log in.
    What do I do now?

    Hold the shift key at boot time, then run through this list, did you install anything recently or perform a update of some third party software? Uninstall it.
    Step by Step to fix your Mac
    Mac won't boot or "You need to restart"
    Create a data recovery, undelete boot drive

  • Why does every 3 mths my ipod keeps on asking for a restore when i did nothing to it

    why does every 3 mths my ipod keeps on asking for a restore when i did nothing to it?

    Either a bad memory/storage location that manifests its infrequently or a intermittent hardware problem like a loose connection.

Maybe you are looking for