FPN for Learning Solutions?

Hello All,
We have FPN enabled between Corporate NetWeaver Portal and the BI Portal. Now we are looking at implementing SAP HR-HCM-Learning Solution module involving a new HR ECC 6 instance. Since Learning Solution requires EP7, I was wondering if there is a need to set up a new EP7 landscape or use our existing Corporate NetWeaver Portal Landscape and hook it up to ECC 6.0?
Any help is appreciated,
Kiran

Jody,
Have you deployed the business package yet?
If not,
Please check this link
https://www.sdn.sap.com/irj/sdn/contentportfolio
Under Business package for every user.
You will have the Business package for learning.
Deploy that on to your portal and get going.
Cheers,
Sandeep

Similar Messages

  • Configuration and Business Package for Learning Solutions

    Dear Experts,
    I need informtion on the configurations and Business Package for Learning Solutions 2(business function HCM_LSO_CI_2) which comes with EHP4. We need to implement the LSO functionalities and I was not able to find out the required Portal Business Package. Please share your experience for implementation of LSO.
    Regards,
    Samir

    Dear Experts,
    Anyone already done LSO Learning Solutions implementation for Ehp4.Please provide inputs.
    Regards,
    Samir

  • Pre-requisite for Learning Solution Implementation

    Dear All,
    We were planning for LSO Implementation. But we were not sure about the components that needs to be installed in ECC as well as in Portal. We have LSOFE 600 ( Learning Solution Front end ) installed in our ECC 6.0 server. What else the components that needs to be installed for LSO implementation?
    The following were the components available for Learning Solution as per note 529063
    LSO - Learning Solution Add-on ( in ECC Server )
    LSOFE - Learning Solution front end ( in ECC Server )
    LSOCP - Learning solution content player ( in Portal server )
    LSOAE - Learning Solution Authorizing environment ( in Portal server )
    Do we need to install all the above said components? As per note 600209 LSO is available only for R/3 4.7 version? Which add-on do we need to install for ECC 6.0? Is LSO add-on is mandotory? Any help is much appreciated.
    Thanks in advance.
    Regards,
    Anand

    Hi Anand,
    To determine possible landscape components use the Service Marketplace at http://service.sap.com/learningsolution -> Necessary System Environment (right hand side) -> Continue to Find Realization Alternatives for Selected Scenario "Managing Enterprise Learning Strategies" -> Implementation in SAP ERP (radio button).  Options are now available that show the required and optional components necessary for the implementation.
    Best Regards,
    Matt

  • Business Package for Learning solutions

    Hi All,
    Can somebody help me on learning solution business package. I have downloaded the package from content portfolio and I am aware there are other related components like LSOCP, LSOAE, LSOOP..
    Can somebody provide me document for complete implementation of LSO. My mail is id [email protected] Any kind of help is greatly appriciated.
    Best Regards,
    Vaishali

    Vaishali,
    Here are some links that may help you.
    [SAP Learning Solution System Landscape|http://help.sap.com/saphelp_erp2005vp/helpdata/en/eb/b3b341800e3231e10000000a155106/frameset.htm]
    [Learning Solution|https://websmp206.sap-ag.de/learningsolution]
    [Setting up SAP LSO on ECC6 with EP|Help on setting up SAP LSO on ECC6 with EP;
    [Business Package for Learning (SAP ERP) 1.0|http://help.sap.com/erp2005_ehp_02/helpdata/en/65/a3a73b6594fc26e10000000a11402f/content.htm]
    Chintan

  • Instructor role for learning solution

    Hi,
    After applying SP18 for ESS/MSS software components,  LSOCP 604.3 and BP ERP05 LEARNING 1.0 on the portal it did not show the instructor/Tutor role which is to be used for the learning solutions.
    Instructor role:
    pcd:portal_content/com.sap.pct/specialist/com.sap.pct.erp.instructor.bp_folder/com.sap.pct.erp.instructor.roles/com.sap.pct.erp.instructor.instructor
    we are applying EHP4 on the ECC6.0 system.
    How can i get the instructor role, instructor page,iview?
    Thanks in advance.

    http://service.sap.com/learningsolution
    Click Media library.
    Let me know if any?

  • Location for Learning solution documents

    Hi
    I am configuring Learning Solution for EP7.0 and ECC 6.0 and  NW2004s.
    Can anyone tell me where should the master repository be located in the KM.
    Can I create the folder for KM under root/document
    Please give me your suggestions.
    Thanks

    http://service.sap.com/learningsolution
    Click Media library.
    Let me know if any?

  • Cannot select Technical Usage "Learning Solution - ABAP only" on ECC Server

    Dear Gurus,
            My environment are
            a SAP ERP System(ABAP only) in SMSY with
                   Product Version = "SAP ERP 6.0"
                   Main Instance = "SAP ECC Server" (as Relevant)
                           Note When I select another Relevant for "SAP Learning Sol-Frontend"
                                       Use in logical components; action not possible (see long text)
                                       Message no. SMSY_EDIT_LANDSCAPE413
                                       ... There can only be one relevant ABAP-based main instance. ...
            Select Product Version = "EHP4 FOR SAP ERP 6.0 / NW7.01"
            and Target Stack = "SAP ERP Enhancement Package 4 on NW7.01 - SP Stack 04"
            Existing Technical Usages are
                     - Central Applications
                     - ERecruiting on ECC Server
                     - Financial Supply Chain Mgmt
                     - Human Capital Management
           But I can't add Technical Usage for "Learning Solution - ABAP only" or "HCM - Learning Solution" (The checkbox is in gray color so I can't check it)
           What am I wrong? Please advice.
    Best regards,
    Choosak

    Hi Choosak,
    Try this ,
    Go to  SMSY transaction then select your system .
    In right side you will get the screen where all usage types are defined for your system.
    Select learning solution and HCM and save it.
    Go back to your solution and see whether you can see Learning solution after that.
    Thanks,
    Gerard

  • Error in the BSP service of business package SAP Learning Solution

    Hi all,
    I'm implementing the business package for Learning.
    I've activated a BSP service in Backend system (ECC 5.0) with BP LSOFE300 (Sap E-Learning Solution).
    On testing the BSP service,I've a "Raise Exceptions" on link "Training Activity" and in others link "Error: RC 2".
    This is the exception:
    Exception condition "INITIAL_LEARNER" raised.
    Tipe of interruption: RABAX_STATE
    ABAP Hierarchy:
    Function: LSOF_LEARNER_GET_ACTIVITIES of program SAPLLSO_FRONTEND
    Kindly provide inputs to solve the problem.
    Thanks,
    Lisha

    This worked for me too. Thank you very much.
    However, I am missing the point
    "You must also make sure that all users that use the connection have authorization to Trusted RFC"
    could you be more clear on this.
    I have a problem described below. I am not sure where it is coming from.
    I installed bp for Learning Solution 300 on EP6.0 SP16. It has one BSP iView. The iview is assgined to a page and page to workset and worset to a role. Couple of Portal User ID was assgined this role. SAPR/3 user ids same as portal user ids were assigned to IT105 of PERNR in t-code 'pa30'.
    We are using SAP logon ticket method for SSO with ECC5.0.
    I logged into portal with one user id and tested the application. The corresponding PERNR was assigned some qualifications, profile match up etc. in the backend. The values are getting updated in the portal.
    But when I logged into portal with another user id, I am seeing the same qualifcations of the last 'PERNR' instead of the qualificaitons of 'PERNR' assgined to this User ID.

  • Installation Learning Solution on the Enterprise Portal

    Hi All!
    A have a question: What a business package should be installed on the Portal for Learning Solution?
    Thank.

    Hi Artsiom, I am going through the same exercise at the moment, and the way I understand it is that LSM Portal is a standalone apps running on a j2ee WAS application server (LSOFE) that can be integrated within the EP portal.  The Learning Portal can be called directly by the SAP WAS or it can be integrated as an iView in SAP Enterprise Portal.
    Essentially BSPs, so my guess is either integrate the content running on this LSOFE or incorporate BSPs into the EP.
    See the following links for the Business packages available:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/a7/6f92417e8aac5fe10000000a1550b0/frameset.htm
    Instructor: http://help.sap.com/erp2005_ehp_04/helpdata/en/43/9065e6d9f521a6e10000000a1553f6/frameset.htm
    Learner:  http://help.sap.com/erp2005_ehp_04/helpdata/en/cc/bd580b466cb34eb61e7e9801ffbe2f/frameset.htm
    Additional info:
    This link has a conceptual architecture to illustrate my earlier comments:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/a7/6f92417e8aac5fe10000000a1550b0/frameset.htm
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/bc/1f6f740510aa43bb74e2d415b31c57/frameset.htm
    Hope this helps,
    Thanks
    Jim
    Edited by: Jim Charette on Dec 14, 2009 12:51 PM

  • Need Learning Solutions and Training and Event Configuaration Steps

    Hi Gurus,
    I need to configuare Learning Solutions Module. Please tell me Basic configuaration step for Learning Solutions and Training and Event Management.
    Thanks in Advance.
    Answers will be rewarded.
    Regards,
    Ram

    Thanks Kavya,
    I need one by on steps for the LSO Configuaration like.
    1) What all steps we need to configure in Training and Event Management
    2) What all steps we need to configure in Authoring Environment
    3) What all steps we need to configure in Content Management
    4) What all steps we need to configure in Portal.
    To implement  LSO ,  out of these four module which one we have to configure first.
    What kind of assistence we have to provide for Technical People.
    Please let me know.
    Thanks a lot once again for your support.
    Regards,
    Ram

  • Learning Solution and Multi-tenancy

    Hello All,
    Does SAP Learning Solution support multi-tenancy/SaaS models?

    Hi,
    I would describe Learning Solution to be built upon the TEM.
    Learning solution provides a web interface where an employee can prebook/book/cancel for the courses available. Also the approvals if required can take place.
    Learning Solution offers E-learning facility that is, web based training courses through its interface.
    The concept of prebook/book/cancel and followup activities is same as TEM but the transactions in ECC are different PSV1 is LSO_PSV1 similarly PSV2 is LSO_PSV2 and so on.
    So if you are going for ESS and Portal and want your employee book courses from web interface then go for learning solution as learning solution also gives e-learning as well.
    Incase of TEM if you want the administrator is only responsible for the training activities then go for TEM,
    But learning solution offers both administrative tasks through LSO* transactions as well as online booking.
    So i suggest you go for Learning solution which by default is present in the new versions of SAP ECC.
    Regards,
    Divya

  • Learning Solution and TEM

    Hi Gurus,
    Whats the difference between TEM and Learning solution....
    Whether any particular IMG activity to be carried for using learning solution than activating in IMG under TEM node....

    Hi,
    I would describe Learning Solution to be built upon the TEM.
    Learning solution provides a web interface where an employee can prebook/book/cancel for the courses available. Also the approvals if required can take place.
    Learning Solution offers E-learning facility that is, web based training courses through its interface.
    The concept of prebook/book/cancel and followup activities is same as TEM but the transactions in ECC are different PSV1 is LSO_PSV1 similarly PSV2 is LSO_PSV2 and so on.
    So if you are going for ESS and Portal and want your employee book courses from web interface then go for learning solution as learning solution also gives e-learning as well.
    Incase of TEM if you want the administrator is only responsible for the training activities then go for TEM,
    But learning solution offers both administrative tasks through LSO* transactions as well as online booking.
    So i suggest you go for Learning solution which by default is present in the new versions of SAP ECC.
    Regards,
    Divya

  • Install Files Determination for "SAP Learning Solution" from SolMan

    Hi Experts,
    is it possible to determine what installation files one should download from Market Place to install the "SAP Learning Solution"?
    A colleague of mine should install the "Learning Solution", and he asked me how can we identify the needed files in SolMan, so we could download them and install.
    I looked in DSWP, and all I could find was Maintenance Optimizer, but that functionality can just identify the needed files for maintaining of already installed systems.
    I wasn't able to find any info on SAP Support Portal either.
    Can anyone point me in right direction?
    Thanks,
    Cheers,
    Nenad

    Dear Nenad,
    Have you checked http://service.sap.com/swdc
    Download
    > Installation and Upgrade
    >>My Company Applications
    >>>SAP ERP
    >>>>>Select Version
    >>>>>>Select OS
    >>>>>>>Select DB
    You should be able to find the files there.
    Regards,
    Paul

  • Business Packages for SAP Learning Solution

    Hi All,
    I need to upload the Business Package for SAP Learning Solution in EP 7.0
    Can anyone give me a link to download the Business Package for SAP Learning Solution.?
    Regards,
    Eben.

    Hi Eben,
    For EP 7.0, you would have to go for BP for Learning 1.0.
    From service market place :
    https://websmp101.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=Y&FUNCTIONBAR=N&EVENT=TREE&V=MAINT&TA=ACTUAL&TMPL=01200615320200008111
    But this BP apart there are a couple of other things that you would have to take into consideration like the add-ons on the backend (ECC) system.
    Check list :
    http://help.sap.com/saphelp_erp2005/helpdata/en/bc/1f6f740510aa43bb74e2d415b31c57/content.htm
    Refer to the online documentation here.
    http://help.sap.com/saphelp_erp2005/helpdata/en/65/a3a73b6594fc26e10000000a11402f/frameset.htm
    Hope this helps.
    Cheers,
    Sandeep Tudumu

  • Question for installing Solution Manager & ECC 5.0

    Any idea for installing Solution Manager 3.2 on Windows server 2003 with Oracle9i problem when install Database Instance. Installation failed when the intallation progress went to Oracle Post-Load Action.
    The message from startsap log file is
    "running C:\usr\sap\T01\SYS\exe\run/sapstart.exe name=T01 nr=03 SAPDIAHOST=saptest02 -Wait
    start service SAP01_03 on machine
    saptest02
    OpenService of SAPT01_03 failed. Error#: 1060
    CreateNamedPipe for
    saptest02\pipe\SAP01_03 Failed, Extended Error #2
    start service SAP01_03 on machine
    saptest02
    OpenService of SAPT01_03 failed. Error#: 1060
    C:\usr\sap\T01\SYS\exe\run/sapstart.exe=>sapparam(1c): No Profile Used."
    Another question is about installing the Oracle database software: should we choose Create Databse or not when install Oracle Server Software only?
    Is my installation process as following correct?
    ->SELECT A PRODUCT TO INSTALL:
      Oracle9i Database 9.2.0.1.0
    ->WHAT TPYE OF INSTALLATION DO YOU WANT:
      Enterprise Edition
    ->SELECT A DATABASE SUITED TO YOUR NEEDS:
      Software only
    After end of installation
    install Oracle9i Client 9.2.0.1.0->Administrator
    Thanks a lot

    Hi Shusen, I´m trying to do the same think (Install ECC IDES with Oracle 9i in one computer for educational propose), can you help me with this:
    1.I made the same Oracle install process because when I tried with sapserver.cmd nothing happened, for that reason i made:
    SELECT A PRODUCT TO INSTALL:
    Oracle9i Database 9.2.0.1.0
    ->WHAT TPYE OF INSTALLATION DO YOU WANT:
    Enterprise Edition
    ->SELECT A DATABASE SUITED TO YOUR NEEDS:
    Software only
    After end of installation
    I did not install client, is this correct?
    2.After install this, I run the sapins.exe but  show me this error: INSTALL FIRST SAP J2EE ENGINE, I download the JAVA SDK from JAVA page (java_ee_sdk-5-windows) but did not fix the problem: Do you know what file is this? Or, where is it in the DVD installation?
    Thanks in advance if you or somebody can help me and excuse me if the answers are obviously, but I´m not a system engineer I´m only try to install IDES for learn SAP WM.
    Thanks.

Maybe you are looking for