FPN implementation between Netweaver 7.1 and 7.0 portals
Hi,
I am trying to to implement fpn between Netweaver7.0 and 7.1 versions. I require the steps on how this can be done.
Thanks and regards,
Deepthi.
Hi,
Thanks a lot.That link was very helpfull.I followed the steps ie exchanged the certificate for setting up trust etc.
Now i can see the consumer portal details under trusted systems in my producer portal.
Further i did the register password step.
In my producer portal when i navigate :
system administration>federated portal>detailed navigation ;the detailed navigation is empty ie doesnt show any option such as myself as the producer.
What could be the problem?
Regards,
Deepthi.
Similar Messages
-
What is the difference between NetWeaver 7.3 and NetWeaver 7.03?
Hi Experts,
Can anydoby explain me the difference between NetWeaver 7.3 and NetWeaver 7.03? or say difference between NetWeaver 7.2 and NetWeaver 7.02?
I have been confused by these 2 terms. As far as I know, the features of AS ABAP in NetWeaver 7.3 and NetWeaver 7.03 are almost same. The same applies to NetWeaver 7.2 and NetWeaver 7.02.
BTW, as I know the BS2011 are based on NetWeaver 7.03, PI 7.3 are based on NetWeaver 7.3.
Thanks and Best Regards
Fei
Moderator message: not directly related to ABAP development, please search for available information, e.g. in the Netweaver forums.
Edited by: Thomas Zloch on Mar 1, 2012Vivianemt wrote:
I have an Olympus OM D E 5, I think only Lightroom 4.3 is useable.
The Olympus OM-D E-M5 was first supported in Lightroom 4.1
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Vivianemt wrote:
Can I upgrade from LR 4 to 4.3??
Yes, all 4.x dot releases (updates) are free of charge to all version 4 owners.
You only pay again for the next major version upgrade = version 5 unless you're a Cloud member where all upgrades and updates are included in the membership fee. -
Difference between Netweaver 7 SR2 and Netweaver 7 SR3
Guys,
Can anyone tell me the difference between Netweaver 7 SR2 and Netweaver 7 SR3, I have a question out with SAP regarding the supportability of SCM 5.1 on Windows 2008.
The response I got back was that SCM 5.1 is based on Netweaver 7 SR2, but it was my understanding that the SR designation was for the level of support packs and kernel upon vanilla installation. Have I missed something fundamental, because my SCM installation is patched to the highest level and therefore surpasses the patch and kernel levels provided by Netweaver 7 SR3.
TIA
ChrisHello Chris,
The main difference between these releases is the initial SP level that comes with each media kit:
NetWeaver 7.0 SR3: 14
NetWeaver 7.0 SR2: 9
NetWeaver 7.0 SR1: 6
For more details, you can check note:
#789220 Support Package level for NetWeaver Installations/Upgrades
Other differences relate to the (new) installer with some bugs corrections and a few additional features and restrictions:
- the Unicode restriction in SR3: "Only Unicode support for new installations" - "Every newly installed SAP system is a Unicode system. However, non-Unicode is still supported for copied and upgraded systems." So a new install based on SR3 must be UNICODE. On the other way, if you upgrade your, say, SR1 system to SR3, you can still run it NON-UNICODE.
- SR3 supports only 64bit new installs on the Central Instance. However, if you need to add dialog instances (application servers), they can be 32bit ones (albeit 64bit is always recommended). When upgrading your system from SR1 to SR3 (for example), you can skip this restriction. That is, you can keep your CI in 32bit, although this is highly not recommended.
A common workaround for these restrictions (if you want to keep your system NON-UNICODE and/or if you want to keep it 32bit) is to:
1) Install a SAP NetWeaver 7.0 SR2 (SAP ERP 2005 SR2, SAP CRM 5.0 SR2, SAP SCM 5.0 SR2, SAP SRM 5.0 SR2) system.
2) Patch this system to SAP NetWeaver 7.0 SR3 (SAP ERP 6.0, SAP CRM 5.0 SR3, SAP SCM 5.0 SR3, SAP SRM 5.0 SR3).
There are more features / restrictions on the installation guides for SR3 in section: "1.1 New Features"
Also, there is many more minor differences like, for example, that you can only install a SAP system in a Windows 2008 from NetWeaver 7.0 SR3 and up - see note #1054740.
I hope this information helps.
Best regards,
Tomas Black -
RFC connection error between Netweaver 7 EHP1 and Ides ECC6
Hi Friends,
I try to create source system in BI from Netwever EHP1 to IDES ECC6 EHP3.
During the creation I get a connection error, says. check connction parameter.
I checked the parameter, everything is fine. Server, System and number.
When I went to the SM59 and created a connction.
I.E. with the same parameter like system = 06 and server = compi9 gave client 800 etc.
The Host name is resolved to 192.168.2.111 wich is OK.
But when I run the connection test it shows me "ERROR: partner '80.156.86.78:sapgw06' not reached"
I have no idea where this IP '80.156.86.78" is comming from.
No Problem with the opposite way, from Ides to NW and login to the System is OK too.
Can anybody help me with this problem.
RG. JimbobHi,
What is the next screen that comes up when you click on remote logon.
If no screen comes up then:
Check the user type of the user id used for this RFC.
It should be either dialog or service user for able to remote login.
If it open a new window and asks for password, then its excatly password issue.
Also make sure that the password is in numeric and correct.
Also make sure that the current user check box is unchecked.
Even if it dosent work, delete the connection and create again.
Please award points if helps.
Thanks
Santhosh -
NetWeaver 7.0 and NetWeaver 7.1
Hello All,
Do you know, what is difference between NetWeaver 7.0 and NetWeaver 7.1 ?
Kind RegardsHi,
Check this discussion:
Re: Differences between SAP Netweaver 7.0 and 7.1
http://www.sdn.sap.com/irj/sdn/nw-ce
Thanks,Prasanna -
Netweaver developer workplace and Infrastructure
Hi all,
Can anyone please explain the difference between Netweaver developer workplace and Netweaver developer Infrastructure?
Thanks in advance,
AnushreeHi Anushree,
Netweaver Developer Workplace is the combination of a local WAS Java plus an NWDS. The NWDS is the Java IDE solely, based on Eclipse.
See http://help.sap.com/saphelp_nw2004s/helpdata/de/b3/304f4506e4684782f5d9c39451c3e9/frameset.htm
NWDI is Netweaver Development Infrastructure.
NWDI provides an infrastructure to develop Java applications on netweaver platform and is responsible for versioning,building and lifecycle management of these applications developed.
It has mainly three components :
DTR(Design time repository) : for versioning of any file altered.
CBS(Component build service) : for building application in central build environment.
CMS(change management service):to transport and setup logical landscape.
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/312b1a8bea3ec8e10000000a1553f6/frameset.htm
NWDS is netweaver Development Studio.
NWDS is just a development environment with all robust development tools.
It can run j2ee,j2se and sap applications also.
It is an interface to access NWDI services and applications.
http://help.sap.com/saphelp_nw2004s/helpdata/en/15/0d4f21c17c8044af4868130e9fea07/frameset.htm
Regards, Suresh KB -
Hi All
IHAC,customer want to use CA to implement certification.
I use wls8.1.3 and wls8.1.4 to config two-way SSL.After completing all configuration,I modified startweblogic.cmd with adding
-Dweblogic.security.SSL.enforceConstraints=off
I use a test application,a web application,to read the personal CA(client CA) out .But I find,the personal CA which read out by the application is deficient.
But if I use wls8.1.2,there is not this problem.
Whether there are some difference of SSL implementation between wls8.1.2 and wls8.1.3,wls8.1.4?If so,how about wls8.1.5?
Thank you in advance.
leeppy.Hi,
From my experience point of view, I can tell you that the client SSL libraries are broken since SP4.
A program will run perfectly on SP3 and fails on SP4, and 5. This is only a problem on the client side, not server side I think. Indeed, others libraries are working fine with WL8.1 SP5.
The client libraries send an invalid certification chain. Moreover, there is now a problem in the context when using web service. If you access a WSDL on HTTP and if endpoints are in HTTPS (2WAYSSL), then you have a fatal error on the client side. With SP3 is working fine. So unless you need some bug fixes that can be found in client lib of SP4 & 5, I can just advice you to stay with SP3 client libs, until BEA is releasing a patch. If you access both the wsdl and websercice on HTTPS, and that you do not enforce 2wayssl, you will see no more error, but all trasfers are done over oneway ssl. If you enforce 2waySSL, you will see a fatal error (incomplete client chain).
Pascal -
How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI
Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
RegardsDEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information. -
Differences between Netweaver 2004 and Netweaver 2004s?
Hi All,
Can anyone please explain me in details the major differences between Netweaver 2004 and Netweaver 2004s.
Thanks in advance
Regards
HenryHi Henry,
This content i got from experts:
The code developed on 2004 will work on 2004s.
Some minor changes have been made refer to the documentation for specific details
SAP NW2004s is the mySAP Business Suite edition of SAP NW 2004.it is a minor release that delivers on specific needs of the mySAP and xapps solutions delivered by SAP in 2005. the "s" stands for "mySAP Business Suite Edition".
The next major release of NW will deliver on Business Process Platform(BPP) it will be released in 2006.
Few of the New capabilities in NW2004s
1)Developing a web based user interface with Web Dynpro fro ABAP.
2)Enhancements to enabling B2B processes
3)Enhancements to business task management
4)Enhancements to business planning
5)Enhancements to enterprise data warehousing
6)mass setup of mobile devices
7)implementing a global portal
Refer the link for more info
http://help.sap.com/saphelp_nw04s/helpdata/en/5b/8c3842bb58f83ae10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
NW04 is a 'Java version' which means you can develop applications using Java and export them to portal.
NW04s is a 'ABAP version'.Here you can develop ABAP reports and transactions and export them to portal. There you can create iViews using them.
Netweaver 04s, includes both the ABAP and Java stacks. The Sneak preview for NW04s is only for the ABAP stack, and the Sneak Preview NW04 SP15 is only the java stack. If you are using the sneak preview for ABAP, you can develop WDA applications and BSP applications, they run directly in the engine, not in a portal. But they can be embeded in an iView in some portal. You don't have to have a portal to run your application. If you are using the java side, you can develop WDJ applications and JSP applications. Same applies here, they run on the java engine, not in a portal, but can be embeded into an iView which runs on the portal. But you don't need a portal for your application to run. The portal is just a frontend UI, the apps themselves run on the underlying engine, whether its ABAP or JAVA.
Refer to the following threads for more information
Re: What is NW04 s?
Re: Differences between NW04 SP11 and NW04 SP15
I hope this will help you
Regards
Suresh -
Difference between NetWeaver 2004 and NetWeaver 7.0 or 7.1
I am little confused and curious to know the recent changes happening in SAP.
Can you please tell me the differences between NetWeaver 2004 and NetWeaver 7.0 or 7.1
NetWeaver 2004 is named because SAP has released it in 2004
and then we have XI 3.0, XI.7.0(that is PI right) , EP6.0 etc as individual components have different versions released in NewtWeaver suite.
But what is this NetWeaver 7.0.
We have EE5 or ECC6 and WebAs 6.4 or GUI 6.4 or recently GUI 7.o or WebAs 7.0.
How does all these differe, is individual component of NetWeaver upgraded with higher versions or total NetWever is upgraded with a higher version.
Can any one please tell me the exact difference between versions.
If some one has ECC6 installed in their environment does it mean that they have Netwaver components like XI, EP, MDM.. etc are installed or its only R/3, BI etc...
How it works exactly?
Thanks,
Kiran.Pretty much everything is explained in here:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf">SAP NetWeaver Process Integration 7.1 Overview of New Capabilities</a>
I think there's a weblog with a concise list somewhere, but I dont have the link saved.
Hope that helps.
James. -
SSO Connection Between Netweaver CE 7.2 and MDM 7.1
Hi ,
I am trying to set up SSO connection between Netweaver CE 7.2 and MDM 7.1 systems in our landscape.
But Iam not finding the MDM template in Netweaver CE to create the MDM system in System configuration tab of CE.
Please help me on how to go about to create the SSO connection between CE and MDM system.
Regards,
Anand VHi Shiv,
The MDM content business package MDM JAVA WD FRAMEWORK 7.1 7.11 and MDM WEB SERVICES_RT 7.1 7.11 based on Note 1471326 have been Installed on CE but the restart was not taken.
Is the frestart necessary to get the MDM template?
Regards,
Anand V -
Hello guys
who can tell me what differences between Netweaver development Studio 2.0.14 and 2.0.15 or where I can find documents about them?
p.s.sorry,I posted it in another thread as well.
Thanks in advance
LiyingLiying
Check these threads if it helps
NWDS + CHECKSTYLE / CHECKLIPSE
/people/umair.salam/blog/2006/01/26/installing-and-configuring-the-preview-edition-of-ep
Error while creating my first project on SP15 and why Help doesn't work?
Thnaks
Sat -
Difference between MiniSAP 4.6D and MiniSAP Netweaver
Hi guys,
I was confused with MiniSAP 4.6D and the MiniSAP Netweaver.What is their difference? I am searching for the MiniSAP where I could practice BASIS and ABAP, like R/3 system. But then, there is also a MiniSAP Netweaver. Could you tell me the difference between the two? And which one is free and where to download the right installer I am looking for my need?
Thanks guys.In any case you cant download MiniSAP 4.6D , now only Netweaver present on SDN for download Also 4.6D it's very old release, try to use Netweaver ...
For learning it good, -->
New Blog Series: ABAP Trial Version for Newbies
Regards. -
Difference between OWB 11g OBE and OWB 10g: Implementation Part I?
I am planning to attend oracle OWB class Oracle Warehouse Builder 10g: Implementation Part I (Data Warehousing and Oracle Business Intelligence) through Oracle University http://education.oracle.com/pls/web_prod-plq-dad/show_desc.redirect?redir_type=13&group_id=1343&p_org_id=1001&lang=US&media=1&source_call=?
Has anyone already taken the class and tell the difference between the class and owb 11g oracle by examples in http://www.oracle.com/technology/obe/11gr1_owb/owb11g_update_extend_knowledge/less1_setting_up/less1_setting_up.html?
If there is not much difference, I woukd like to learn it by myself through Oracle OWB 11g OBE.
Thanks in advance. WSIf you seriously intend to take up OWB as your career path then i would advise you to go to Oracle unversity and attend classes , if you are going to use owb only for a project/small works then use Oracle by example.
Further to this if you company is sponsoring you then take oracle unversity course as "every little helps" and its never too bad to learn something the right way.
Its like making a choice whether to learnmusic form the web(online) or going to a music teacher and learning music. I would prefer the second approach. -
Difference between NetWeaver 2004 and NetWeaver 2005?
Although SAP is mentioning it in several presentations, no specific information is (public) available on NetWeaver 2005.
We are looking for arguments to wait with our strategy to switch to NetWeaver 2005, but this means that we have to wait to the beginning of 2006 (at least then we expect it to be GA).
Can anybody tell me if there is information on NetWeaver 2005 available, and if so, where I can get it?
TIA,
Jacques DokterThe reason we are waiting is that we expect a seriously changed architecture. Currently, NetWeaver has only WAS 6.40 as the common component. All applications - in particular OLTP - is still connected using plug-in's.
We have heard that this will change in later releases of NetWeaver where XI will be the plug-in layer.
Also the ESA will be much more mature. But this is only what we have heard.
Up to now, there has not been an official document from SAP that can confirm this.
Oh, and John, NetWeaver 2005 was mentioned during the TechEd 2004 in Munich.
Regards,
Jacques
Maybe you are looking for
-
We had our service started on 03-08-2012. For the first week it was okay, but we've started to have problems. At first I noticed a delay in STB response time with the remote (VZ P265v2), then no STB response at all when buttons were depressed. This i
-
Hello Friends, I need to add one field in the KB15N screen. I feel that I must use the coding block feature to first add the field in the structure CI_COBL and then follow the rest of the process. Is this is the right approach or is there any other s
-
Problem exporting XREF3 to excel
hi all, i am trying to export BSEG data to excel.all other columns are ok, but the last digit in the value of column XREF3 is getting replaced with 0. for example if the value is 200750000004930001, the value in excel is 200750000004930000. same is t
-
I teach web design at the high school level and I'm have a little trouble keeping a small group of students focused on their work when myspace, e-mail and youtube are just a click away. I'm looking for a mac application that will allow my students to
-
How can i unlock my phone i just bought
i just bought an used phone off ebay at&t im trying to unlock my imei how can i go about this