FPS 1800 speaker system volume control

Hey guys my volume control for my cambridge soundworks FPS1800 system is really damaged and I need to replace is it where can I find a replacement for it or is there anyone willing to sell theirs?

yeah im interested but im in the USA though is that a prob?

Similar Messages

Make system volume control itunes audio?

I have a keyboard with audio controls, but they control the system volume, anyway i can make the system volume control itunes audio? i wanna do this becasue i have it airplaying music to an airport express (1st gen). it would make it MUCH easier to control things

Does the sony minisystem have its own volume control?
If so, it sounds to me like your computer is getting stuck thinking that the minisystem is still connected, which would be the cause of your issues. There is a switch inside the headphone jack that gets flipped when headphones are connected, and that switch might be getting stuck in the "on" position. You may have to take the computer in for service in order to get that straightened out.
~Lyssa

Chromium takes over system volume control

Hi forum,
I'm using GNOME, ALSA (no PulseAudio or ESD), and Chromium on an i686 install. On my laptop (an Asus F3Jm), Master is a toggle control, and PCM is the slider that controls the system volume. The volume hotkeys on my laptop work correctly and control the PCM slider. However, when I open a Flash applet or an HTML5 video in Chromium, the PCM volume jumps to 100% and cannot be controlled by the hotkeys (not even muted); instead, the applet's volume control is the only way I have to control the volume. This is not an acceptable situation for me as some sites (for example Livestream) don't remember my volume setting and start off at 100% volume every time.
Well, sometimes. Once in a while it actually does work as expected (application volume controlled independent of system volume, and system volume can still be controlled via hotkeys), which is the part I find particularly confusing. I haven't figured out what the situations are where it does and doesn't take over the volume control.
(EDIT: It seems that it happens the first time, and only the first time, that I start Chromium after each system boot. So one "workaround" could be to never shut down or reboot...)
I don't believe the OSS emulation is being used, because I've unloaded and blacklisted the snd_*_oss modules and don't have alsa-oss installed. It's possible that Chromium is using the hw device instead of the default, but I don't know how to check for this or fix it. I don't have Firefox installed, but I suppose I could try it if someone thinks a comparison might be useful.
Package versions:
alsa-lib 1.0.22-1
chromium 4.0.249.78-3
flashplugin 10.0.42.34-1
<your requested package here>
Thanks in advance for your suggestions.
Last edited by tarpman (2010-02-11 17:02:44)

ALSA doesn't support per application volume control, which would explain the behavior. That behavior, however, is still incorrect, as normally applications respect the volume level and don't overwrite it without user intervention.
A simple solution would be to switch to (at least for me) more advanced OSSv4 or use pulse audio (which I personally dislike).
You should file a bug report for chromium (or check whether you got some settings wrong).

System Volume Control Doesn't Work

I have two output devices connected to my Mac Mini. I have a set of speakers connected to the jack on the back of the Mac, and a Logitech USB headset connected to a USB port.
When I use the Logitech headset as the audio output device, the volume buttons on my apple wireless keyboard and my apple remote work as the should do, changing the system volume as they are pressed. However, when I change the output device to the built-in output jack, the output volume doesn't change as the volume keys/buttons are pressed. When I press the volume keys/buttons, the little volume icon shows up on the screen and the white dots increase/decrease as you would expect, but the output volume doesn't actually change. You can change the volume using the mouse and the slider, but that defeats the object of having a remote control or dedicated volume buttons. If I switch the output back to the USB headset, everything works normal again. So its only when the built-in output is selected that the volume can't be controlled using the keys/buttons.
Any ideas?
Cheers
Rob

If you have not yet restored to factory defaults I would try that. Maybe there is some corruption which is now in your backup.

Musicapp, speaker and volume control won't work since updated to iOS 7.1

Since I updated my iPhone 4 to iOS 7.1 my iPhone works faster than iOS 7. But some apps like musicapp, youtube have no volume control and the speakers won't work. When somebody call me the iPhone rings normally. I tried turn off bluetooth because I thought the iPhone will conect to my car. I pressed the lock and homebutton for reseting, I deletetet my whole iPhone and installed iOS7.1 again - nothing changed. Only when i plug in my earphones everything will work as normal.

Hi AmishCake!
Thanks for your tipp! i cleaned the headphone port and usb-port and reinserted the plug several times!
i think this isn't the problem!
here i prepared a picture how the screen looks like when i plug in my headphones!
https://www.dropbox.com/s/omi3hlp1zzyx43k/Foto%2026.03.14%2013%2017%2040.png
it seems to be a problem of the update to 7.1 because some guys posted the same problem on other sites.
sorry for my bad english and thank you for trying to solve my problem!

Does iTunes/Airport Express support speaker-specific volume control?

Hi there,
So say I have two Airport Expresses, one in the living room with speakers and another one in the bathroom with speakers. Can I setup the volume in the bathroom to be lower?
Thanks.

You can do this using Airfoil at http://rogueamoeba.com/airfoil/

How to restore the volume control while playing music in iTunes

How do I recover the volume control (slider at the bottom of the screen) in iTunes when playing music? After I plugged the device into an iHome speaker, the volume control dissappeared.

generdude,
Not that I know of, but you can turn it off completely by going to System Preferences...>Sound>Sound Effects>Alert volume: (Uncheck) Play feedback when volume is changed.
;~)

Volume Control I

My soundblaster Volume control icon on my task bar has disapeard. How do I get it back. Note am not talking about windows volume cotrol icon
Thank You
Johnny:angry:

Seems as if we have the same issue here.
Ever since installing Sound Blaster 6 Plug & Play in this INtralink PC (Pent-III W-98SE) my system volume control has simply vanished - from taskbar, start menu, settings - can't find it anywhere!
Installed every driver I could download; still no sound other that crackles when booting up, and no settings window to be found.
There was an IRQ conflict, but resolved that - to no avail.
When I try to open a sound file from RealPlayer or WMP i get the "Other device may be using" line - but can't find said device, even if it is competing for resources.
Tried the above solutions, but the reccomended settings just were not there to select.
Suppose I could do a clean re-install of W98, but there goes all my data, and don't really want to do that.
Is it time to buy a new sound card and start over?
Don't really want to dump much more $ into this old box - Domestic Management would rather just replace it. Would like to keep it as a backup tho.
Open to suggestion!

Inspire 6.1 6600 volume control off

the problem is the speaker power volume control because I have try the headphones and the sound is good...and the power working but the green light of the power/volume is off and the speakers are mute...
Someone can help?
thx,
alex

Try contacting Creative Labs support through the website or over the phone. They'll be able to supply you with the part, provided the speakers are still in production. CLs are usually quite good at that.

Broke volume remote control = means buy a new speaker system??

I was bought a speaker system Creative 7.1 T7700 in 2004. After year 6 months, the volume remote control stop functioning correctly. When i adjust volume, the output sound is not stable, some times get loud and quiet. My speaker already out of warranty. Who can repair the volume remote control? If Creaitve can repair it, how much will be charge on it's Why Creative don't sell this accessories? Because of this, make me stopping purchase Creative product........................................... ......

Daniel
Thank you. But i don't where is the knob or what is knob? It's inside the remote control or the plug pluging into the speaker?
Why they do not replace a new one to me? Because of this is about their products quality problem.
When i searching wired remote, not just me have this problem.
But Creative change a replacement to them.
deepcool

Controlling TV Speakers Indirectly with Apple Remote via System Volume

My Mac Mini is connected to a Sony TV via an HDMI cable. I would like to control the volume of the TV speakers indirectly by controlling the Mac Mini system volume with my Apple remote. But when I attempt to change the volume the speaker icon appears and is grayed out.
What do I need to do in order to control the TV speakers indirectly with my Apple Remote by adjusting the Mac Mini system volume?

As standard Macs do not support controlling the volume of an attached TV connected to the HDMI port. This feature is called CEC (Consumer Electronics Control).
There is at least one adaptor which can 'insert' the CEC commands, see http://www.pulse-eight.com/store/products/104-usb-hdmi-cec-adapter.aspx
This adaptor however requires the software you are using to have support for driving this adaptor, therefore it does not look like the generic Mac volume control in association with the Apple remote would control it. Why you ask did I mentioned it then? Well XBMC (XBox Media Center) for the Mac does supprt this adaptor, you can therefore use XBMC on the Mac to play movies to your TV and control the volume of the TV.
If you can write software, you could also in theory use their library to add a more generic volume control.

Problems with volume control, built-in speaker on HP ProBook

Hi
Recently installed Arch on a HP ProBook 4330s. Initially sound was working perfectly, but now I'm having problems with the built-in speaker.
Using alsamixer in the terminal, I can independently control the volume of the headphone jack and the speaker, but it seems like the speaker is linked to the headphone volume instead of the speaker volume. Thus raising the speaker volume in alsamixer has no effect on the speaker itself, which only outputs sound as long as the headphone volume is raised and the loopback box is checked. This also means that the speakers cannot be muted while using headphones.
I installed pavucontrol to see if I could gain any insight, but trying to select "Speakers" as output port seems only to have an effect the volume sliders in alsamixer. So no settings in PulseAudio UI could solve my issue.
I have googled wide and far, but haven't found anything helpful. I tried reoading kernel modules snd-hda-intel, snd-hda-codec-idt, snd-hda-codec-generic, but nothing changed.
Below is some info of my system. Please let me know if I need provide more. Any help is appreciated.
aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
sysdefault:CARD=PCH
HDA Intel PCH, 92HD87B1/3 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: 92HD87B1/3 Analog [92HD87B1/3 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
pacmd list-sinks
1 sink(s) available.
* index: 20
name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: IDLE
suspend cause:
priority: 9959
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 19.81 ms
max request: 3 KiB
max rewind: 344 KiB
monitor source: 25
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 1
configured latency: 20.00 ms; range is 0.50 .. 2000.00 ms
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "92HD87B1/3 Analog"
alsa.id = "92HD87B1/3 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd4a00000 irq 39"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1c20"
device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Intel CougarPoint HDMI"
alsa.components = "HDA:111d76d1,103c167e,00100205 HDA:80862805,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
properties:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-speaker>
cat /proc/asound/cards
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xd4a00000 irq 39
Last edited by frwdrik (2014-12-08 00:49:52)

I do have all those packages installed. The volume controls were working perfectly for about 3 week, but now suddenly they are not behaving as expected. I don't know of any changes I made to my system that could have caused this. I suspected it might be a problem with the drivers, so I tried to find the appropriate driver at https://www.kernel.org/doc/Documentatio … Models.txt
[frwdrik@frwdrik ~]$ cat /proc/asound/card0/codec#0 | grep -i codec
Codec: IDT 92HD87B1/3
But I cannot find this codec on that page.
Last edited by frwdrik (2014-12-29 13:57:44)

Audigy 2 ZS Platinum Software Issue: Volume Control, Speaker Settings, Equalizer, C

I installed my ZS Platinum back in December, everything worked fine for 2 months, then I started to hit trouble.
First, the driver began hanging when I took my headphones in/out, resulting in no sound from either output. I updated the drivers and this problem went away.
Then, I was gaming and all the sound stopped working. Reboots did nothing, so I tried to reinstall the drivers. This is how the problems began. The first time I uninstalled all my creative stuff, downloaded the newest drivers, and installed that. I didn't realize that I couldn't download all the bells and whistles off the drivers page.
So, I unistalled those drivers, and used my CD to install the drivers and MediaSource. I encountered the PLXcore.plx error during install and every time I booted Windows. Also, none of the extra applications (Volume Control, Speaker Settings, Graphic Equalizer, CMSS) would run. I uninstalled, reinstalled and tried again.
This is where I am now. I chose not to install MediaSource this time. Again, I encountered the PLXcore.plx error during install, but I'm not receiving the error when Windows boots (because I didn't install MediaSource?). But still, most of the little applications don't run. I see the Volume Control icon in my task bar, and if I press the mute button on the keyboard the symbol changes, but when I click on the icon, nothing happens. "Creative Volume Con..." flashes on the taskbar, and a 0px by 0px white box appears above the task bar. If I click anywhere else, they disappear. The Graphic Equalizer, Speaker Settings, and CMSS dialog do the same thing when opened. THX Console does not.
Also, the on screen display for volume no longer pops up. Is this part of MediaSource? Should I install MediaSource even if I don't plan to use it's
Running XP SP2 on an AMD X2 4200+ with the Audigy 2 ZS Platinum.
EDIT: Thought I'd add in another problem I have:
I usally run my DISH reciever's sound through my computer through the Auxillary 2 RCA connections on my front panel. When I boot World of Warcraft or Warcraft III (Both Blizzard games), the sound through this connection becomes very tinny and reverby. If I alt+tab out of the game, adjust the speaker setting (5. -> Headphones -> 5.) the issue goes away. But each time I start one of these games, the problem returns. Any ideas? Known problem?Message Edited by Cuttlefish on 03--200703:9 PM

I'm sorry I can't help but I have the exact same problem. I have no Speaker, EAX or graphic eq settings. No telling what else don't work. I have tryied 0 different ways of removing and loading it back with any and all updats and without and no success. I hope someone here can help us.

Volume control buttons don't work for iTunes in speaker mode

Using onboard speakers (no headset on my iPhone 4S, the speaker buttons are not working. In fact the slider ICON in missing in playing music as well as the ringer ICON that comes up when I press the buttons.
I can go into settings, Sounds and manually move the slider for Ringer and Alerts, with "Change with Buttons" set "on, I can then press the volumn buttons on the side and see the slider move up and down (right and left). But as soon as I leave that screen and press either volumn up or down on the side, the Ringer ICON comes up but the slider part is gone.
In this case, there is no sound out of the speakers. However "Siri" works fine.
And in phone mode, I can use speakerphone and hear audio out of the speakers. (In fact in phone mode, speakers or headset works fine).
All other apps the speakers are inop and the volum control buttons are inop.
It's like it's in perminent "mute".

https://discussions.apple.com/thread/3938840?start=0&tstart=0
I got out my air compressor and literally blew the S* out of the docking port. I did dock the iPhone to my car dock port as a test, played music through the car. Then undocked and the volume control and speaker sounds all restored.
Not 100% it was cleaning the docking port or that I unwedged the software by docking into some different device.

Have Audigy2 in Vista, why are there two volume control icons in system tr

Hi,
I'm running an Audigy2 on a Windows Vista system. There are two volume control icons in the system tray. One is the Soundblaster control, the other is the Windows control.
Are these two programs supposed to be running at the same time? Do they conflict with one another?
Thanks for your time,
Big Al Mintaka

Hi pgaastra. I don't know why there are two items in the task bar, but you have identified the
recommended fix. The why never bothered me enough to investigate, so maybe we will both
find out now.
Matt
Message Edited by Matthew Williams on 04-16-2008 08:49 PM

FPS 1800 speaker system volume control

Similar Messages

Maybe you are looking for