FPS in project settings inactive ?

I can't change frame rates in the project setting ? The FPS dialoge is inactive in all settings including custom ?
need help thanks
Matt

You can change it for a new empty project, but once you've added something to the project, it can't b changed.

Similar Messages

I film with an iPhone and edit in PE10, what project settings would be best?

     So I'm filming a short film with my iPhone 4S, and editing in PE10. The recommended project setting for the iPhone 4S's footage is 'Flip Mino HD and Ultra HD 29_97'. However, I film using an App called FilmicPro, which allows me to customize frames per second, resolution and audio capture with some settings. In my case, I've set the app to film at 30fps and with a resolution of 1920x1080. I still use the above mentioned project setting. So my first question is:
-If I'm filming in 1080x190 at 30fps, is there a different setting I should be using for the project?
     Now for the second part. The first part of my editing process is I start a project, select 'Flip Mino HD and Ultra HD 29_97', then I splice and string together the raw footage from FilmicPro like normal. Next I export the project with the settings:
Quicktime (For email and playback on Mac)
Output: 1920x1080, 29_97fps, Progressive, Quality 100 48000hz, Mono, H.264
Source: Clip, Sequence 01,
               1280x720 (1.0), 29_97 fps, Progressive, *insert duration*, 48000 Hz, Stereo
Audio Codec: AAC
Sample Rate: 48000 Hz Mono
Video Codec: H.264
Field Type: Progressive
Aspect: Square Pixels (1.0)
Render at Max. Depth: 24 bit
     After I export the project, I start another project (not changing the project settings from before), and then I import the finished project as media so I can add special FX (in this case muzzle flashes, blood, etc.). However when I add the video, PE10 states the project settings dont match, and asks if I'd like the program to choose the correct settings. I select yes. This changes the project settings to 'DSLR-1080p-DSLR 1080p30'. I edit without issues, and use the same export settings as I did for the base draft. I also notice when I view the project settings in the second project after it changes settings, that it says the editing mode is now 'Sony XDCAM EX 720p'. So my second question is:
-Should I use the setting that PE10 switches to? Or select 'No' and still use the Flip Mino setting i used for the first draft?
     The end video still looks great (for an iphone), although of course there is still noise. I'm basically trying to get the absolute best quality possible. If this is as good as it gets, and It turns out ive been doing this right, then that's fine. But if anyone can recomend better settings to use, then please tell. Thanks.
Forgot to mention, I'm using an unmodified MacBook Pro (2006) with Adobe Premiere Elements 10. Dont know if that info is needed, but thought I'd include it.

BlackJack5852
Maybe I missed something. So extra post on this.
You wrote
Quicktime (For email and playback on Mac)
Output: 1920x1080, 29_97fps, Progressive, Quality 100 48000hz, Mono, H.264
Source: Clip, Sequence 01,
               1280x720 (1.0), 29_97 fps, Progressive, *insert duration*, 48000 Hz, Stereo
Audio Codec: AAC
Sample Rate: 48000 Hz Mono
Video Codec: H.264
Field Type: Progressive
Aspect: Square Pixels (1.0)
Render at Max. Depth: 24 bit
Why? Where did the 720p30 come from?
If you have 720p30 footage, you should be using
NTSC
AVCHD
AVCHD LITE 720p30
If that is what you have, do you really want to export that as 1920 x 1080 or 1280 x 720?
If an export of 1280 x 720, please look at
Share
Computer
AVCHD
Presets = MP4 - H.264 1920 x 1080 p30
and change the settings under the Advanced Button/Video Tab to look like
Please check out the export settings adjustments that you can make under Advanced Button/Video Tab and Audio Tab for the preset that you select.
ATR

Project Settings/Exporting Issues overall in Premiere

So, one thing I've never really been very good at is setting up projects in Premiere and Exporting the video itself.
I seem to always end up screwing around with this and barely getting what I'm looking for in the end.
For the particular video I'm currently working on it seems no matter how I compress it, there's either something wrong with the video, the audio is all screwed up or the audio is just really bad quality.
Half the time what I've had to do with these videos is just export the base video and then merge the original audio file with the video and compress it with a different program (I've used TMPGEnc before, but that trial ran out and I'd rather not buy the full version unless this is the ONLY way).
But overall, it seems like with Premiere I should be able to get something good with this software, instead of having to rely on other programs.
What I'm currently working on is a demo reel with material from four different videos:
An .avi @ 29.97 fps (720x480)
An .avi @ 23.99 fps (720x480)
An .mpg @ 23.976 fps (720x480)
And a .wmv @ 30.00 fps (640x480, very small portions in the overall video however)
I do not have access to these original project files, these videos were created over the past 7 years, and they're lost on different computers.
Here is the project settings I have currently:
http://d3xt3rbescrolling.net/images/Project%20Settings.jpg
The export settings I have tried currently include: Uncompressed Microsoft AVI, Microsoft AVI, MPEG, H.264, etc. (various others I can't remember)
Note: This is a video that will either go on youtube or Vimeo
Any help would be appreciated!
Regards,
Th3On3Fr33man

Here are some good places to get started when determining sequence settings and export settings:
"FAQ: How do I choose the right sequence settings?"
"FAQ: What are the best export settings?"

How to choose the right project settings?

I'm new in taking video's and in editing them. I bought a Sanyo HD Xacti Video camera and made a lot of clips in my last holiday. The clips are transferred to my compter and have the format .MP4 1280-720 depth 1280 and 29,97 fps.
I want to create after editing en DVD which I can show on my TV 16:9 (PAL-Netherlands)
When I create a new project I have to choose the seetings and I really do not know how to choose!!
What Project settings should I choose because in the settings I only see 30 fps under de NTSC systems. Is there some where a general explanation how to do?
Help will be appreciated very much!!
Greetings Willem

Before the NTSC to PAL, I believe there are other major considerations.
1. You are recording 720p30 1280 x 720 16:9 at 30 frames per second, using the MPEG-AVC/H.264 codec). That sounds to me like your are dealing with what they call "AVCHD-Lite". If so, there are major basic problems editing that in Premiere Elements 7. See Steve Grisetti's FAQ
http://forums.adobe.com/thread/454585?tstart=0
2. Your remarks would suggest that you want to create at DVD-VIDEO widescree (16:9) of your Timeline.
3. So before all else, I would determine if you can successful bring your video into Premiere Elements 7 and export the DVD-VIDEO in the NTSC system before you think about converting an NTSC video to a PAL end product.
4. Typically you select the project preset (new project dialog) to match the properties of your video. Once done that does not stop you from changing the export preset later. In the case of your NTSC 720p30 Sanyo video, I would suggest the project preset (new project dialog) = NTSC HDV HDV 720p30. Think of the project preset as a template from which you can edit your video. Although this 720p is a variant of AVCHD, I suggest the HDV category since there is no 720p preset under AVCHD. Note that the descriptions to the right of where you set the preset.
5. In Share/Disc/Disc, in the Burn Dialog, then select the preset: NTSC_Widecreen_Dolby DVD. If that is all completed successfully then we can talk about conversion of NTSC 1280 x 720 16:9 to a PAL DVD-VIDEO (720 x 576 25 frames per second with a 16:9 flag to stretch the video on display after encoding).
6. You may find the following link helpful:
http://www.camcorderinfo.com/content/article_converting_ntsc_pal.htm
ATR

Premiere Element 9 Project-settings...

Hello everyone,
I have some trouble with the project settings ( I hope its the right term, because my programm is in German).
I don't know which setting to use with my video files captured with fraps.
Video clip details:
1600*838
29 fps
.avi
bit rate: 480794 kBit/s
Audio: sample rate: 44Khz
Channels: 2 (stereo)
I didn't find any setting fitting to my video file, and when I choose one which fits partly I can't change the settings (for instance the frame size).
In addtion to that, my video files are blurred in the prewiew and also when the file is exported....
Thank you very much for your help

Well, with that odd Frame Size, about the best that you can do is to choose 1920 x 1080, Import your FRAPS footage into that Project, and then, either leave the black bars, or Scale up your Footage (Default Scale to Frame Size will do that, or you can use the Fixed Effect>Motion>Scale and possibly Motion>Position, if necessary). Scaling WILL reduce the quality, but you might be able to live with that. Only you can know.
Now, in PrPro, one CAN Customize the Frame Size to match odd footage, but that is an entirely different program, and not inexpensive.
Good luck,
Hunt

Can you change and set your own defult midi sync project settings

Hi All,
Can you change the default Midi Sync Project Setting so they have your own settings everytime you start up logic Pro X?
Preferences > Midi > Sync >MIDI sync project settings
General Default:
Frame Rate 25 fps
Check auto detect format of MTC
Default required:
Set frame rate to 29.97fps
check 'auto detect format of MTC'
check Enable Separate SMPTE View Offset
MDI Default is:
MTC and MMC all unchecked
Default required:
Check 'Transmit MTC'
Check 'Transmit MMC'
Check 'Listen to MMC Input'
Any assistance would be appreciated.
Regards,
           Gavin.

No, that's not what I typed above.
The rule is... Preferences are Global, changes made in Preferences affect all Projects.
"Settings" are on a per song basis.
In Logic 9 (and I imagine in X as well) there are two main areas to configure Logic.
1. Is Preferences    Preferences settings are global and affect all projects.
2. Is Settings          Settings are set for each project, they are not global
You typed: Preferences > Midi > Sync >MIDI sync project settings
See what is says, MIDI Sync Project Settings.
Preferences has forwarded you into the Settings area so no, the MIDI Sync options are not global, they have to be adjusted for each song, that's why I suggested setting up templates of your most used project setups.

Help Figuring Out Project Settings?

I have footage from 2 different cameras. I think the cameramen just aren't too sure what they're talking about when it comes to the formats shot in, which in turn leave me a bit confused.
I was editing with HDV 1080p 25fps settings pretty fine, until I decided to replace a clip with an AE composition, and the next day playback became choppy for me. In trying to figure out what was wrong, I realized the clips for both cameras were saying 29.9 in premiere even though my cameraman said it was shot @ 25 fps on the Sony cam. So I am taking a guess here in saying I should probably be editing with project settings to match that 29/30 FPS, right?
Using mediainfo I am also seeing that the footage is 1080i, so should my project settings for these clips be HDV 1080i(60)? Any more info I can provide if needed, but I am already in a bind having to start this project over, but I am confused as to why I was getting playback just fine and then another day no matter what settings I used HDV playback got choppy. Currently re-installing CS4. Any help greatly appreciated as I am still new to this.

Yeah I was told it was done at 25fps, and that the Sony camera had 25, not 24 and that is very well an option in Premiere, but I'm guessing Mediainfo is a lot better to decide what to do it in. Just finished installing premiere again (I assume that will help with my stuttering in playback) and am going with HDV 1080i30 (60i) since that gives me 29.9 fps and well, 1080i instead of p. I tend to get overly worried about these things. I hope this is the right thing to use. I appreciate your feedback.
Not sure if this is relevant, but one camera gives me mpegs while the rest of footage is MP4.

Confused about my project settings - Can someone advise?

I have some clips of my child when she was very little (i've supplied a sample at the bottom). I want to make a project with them in Premiere Elements 10.
I've tried using Premiere Elements' auto project settings advisor (i.e placed the 1st clip of the new project onto the timeline so it can advise if the project settings are correct or not) but no matter what intial project settings i use Premiere Elements doesnt suggest auto corrected settings. So, I've used 3 different media analisis programs to tell me what properties my video clips have and they all say different things:
1) Media info says: AVI (Mjpeg) 720x480 (3:2) 30 fps NTSC, interlaced.
2) MovieScanner says: AVI (Mjpeg) 720x480 (4:3), 480p (progressive).
3) MediaTab says: AVI (Mjpeg) 720x480 (3:2) 30fps, NTSC progressive.
So, i think i can safely say the clips are AVI (motion Jpeg), but are they interlaced or progressive (it's obviouisly important for me to get this right when choosing the project settings)? I have no idea what the pixel aspect ratio and all that would be as that's getting too advanced for me.
Can Mjpeg even be interlaced? Surely if it's lots of Jpegs put together to make a moving image then they must be progressive, or can the Jpegs themselves be interlaced?
Here is a very small sample clip if somebody wants to download & have a look for me:
https://skydrive.live.com/redir?resid=F587D73C02F4DBBB!2689&authkey=!ANELPbk4tYQDCDc&ithin t=file%2c.AVIhttp://
Any tips of how someone would go about finding out these settings would be great too.
Many thanks.

ATR
Your wisdom here would be greatly appreciated (again).
I've decided to make my new movie project of my childs' 1st year in Premiere Elements 12 (not 10), and with the following settings:
The clips i have are of her 1st year and are from the same camcorder. Unfortunently (as previously described) i changed the settings on the camcorder half way through the year. So i have 2 sets of clips i want to use if possible.
The clips are in date order & comprise of the following 2 sets of properties (info from MediaInfo older version 0.7.47):
Set 01:
Format                           : JPEG
Codec ID                         : MJPG
Width                            : 640 pixels
Height                           : 480 pixels
Display aspect ratio             : 4:3
Frame rate                       : 30.000 fps
Color space                      : YUV
Chroma subsampling               : 4:2:2
Bit depth                        : 8 bits
Scan type                        : Progressive
Compression mode                 : Lossy
Bits/(Pixel*Frame)               : 1.161
Stream size                      : 144 MiB (98%)
Set 02 (you have a copy of 1 the clips from this set (2010-12-20 - emily in jersey.avi)):
Format                           : JPEG
Codec ID                         : MJPG
Width                            : 720 pixels
Height                           : 480 pixels
Display aspect ratio             : 3:2
Frame rate                       : 30.000 fps
Standard                         : NTSC
Color space                      : YUV
Chroma subsampling               : 4:2:2
Bit depth                        : 8 bits
Scan type                        : Progressive
Compression mode                 : Lossy
Bits/(Pixel*Frame)               : 1.158
Stream size                      : 93.5 MiB
Now, i have a stumbling block to solve and your advice would be hugely valued:
What project settings should i use (i ideally want to use both sets of clips in the same project, sorry, lol)?
I'm very tempted to use the project settings that Premiere Elements 12 suggests. It suggests a project setting for clips from set 1 (but has no idea about the settings for Set 2). There are more clips in Set 1 and so it makes sense to me (at the moment) to choose those.
The suggested settings from Premiere Elements 12 are:
Sony XD CAM EX 720p
timebase 30.00 fps
640 x 480
square (1.0)
no fields (progressive scan)
30fps timecode
The clip information that Premiere Elements 12 displays for the 1st clip in set 1 that i placed on the timeline are:
Image size 640x480
Frame rate 30
Pixel aspect ratio 1.0
Would you agree that these settings look about right, or would you still recomend the settings you previously suggested (for that clip from set 2)?
Also, just to complicate things slightly too, i have 2 further clips that i wouldnt mind fitting in that were captured using a different camera altogether. I was not going to use them because of the incompatible frame rate, but is it possible? It doesnt matter too much if its too much of a pain becausde they are only 2 clips.
Their settings are:
Video
Format                           : JPEG
Codec ID                         : MJPG
Duration                         : 3mn 2s
Bit rate                         : 16.3 Mbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 24.000 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Compression mode                 : Lossy
Bits/(Pixel*Frame)               : 0.738
Stream size                      : 354 MiB (92%)
Title                            : FUJIFILM AVI STREAM 0100
I'll probably need further advice when the project is completed about how to ideally export the movie.
Many many thanks.
ps. This problem will not occur again, since i now shoot all my clips from 1 HD camera and with all the same settings, lol.
Just in case you wish to view the 1st clip from set 1 that i placed on the timeline, i have uoploaded it to skydrive:
https://skydrive.live.com/redir?resid=F587D73C02F4DBBB!2688&authkey=!AJb8s6PYsHAvg18&ithin t=file%2c.AVI

Correct project settings for Brinno time lapse cameras?

Hi,
I am totally new to all this so please forgive if an obvious answer. I have been doing a building project time lapse using some time lapse cameras by Brinno. They are the TLC200's (http://www.brinno.com/html/TLC200.html). I am about to start a new project to put together the final timelapse but have no idea what type project settings to start it as. They claim to record in 1280x720 HD and output a raw avi file of the time lapse sequence after filming (each frame i think is captured as jpeg). You pre set the number of frames it takes (eg 1 every 30 minutes like I have) and what frame rate it puts the sequence of individuale captures together and outputs to the avi file (I choose 10 fps). That is all the informatoin I have. Any ideas?
Many thanks
[I though I would also mention it is ultimately going to be around a 1min30s - 2 min video at the end to be posted on youtube.]

First, you need to find out exactly what is inside your file
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen
shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/
Also... if your "raw avi file" uses the H.264 codec... it will not work
http://forums.adobe.com/thread/854115
Also... you mention jpeg... which may or may not work
MJPEG http://forums.adobe.com/thread/730396

What project settings should I choose in PE8 for frame rate of 29.97 if camera source unknown?

Hi, I would like to know what project settings to choose in premiere elements 8 for a frame rate of 29.97, pixel aspect ratio of 1.3333 and 1440x1080? Should I choose HDV, AVCHD or hard disk? I didn't record the footage, so I'm not sure what it was recorded on.

I am definately selecting NTSC - HDV, HDV, 1080I30. I then import the video. It shows in the project media - properties as 29.97 frame rate and in the interpret footage it also shows as 29.97. But when it finishes indexing and starts to conform the video is changes to 25 frame rate.
Please see images below. When importing the video it is at a frame rate of 29.97 until the indexing has finished, then it changes to 25 before conforming video
IMAGE 1. Project settings
IMAGE 2. Indexing image. frame rate at 29.97fps
IMAGE 3. Properties while indexing video - 29.97 fps
IMAGE 4. Interpret footage - still while indexing at 29.97fps
IMAGE 5. Finished indexing changes to 25 fps and starts to conform video?

5D MKII Video Project Settings

For 5D MKII Video Project Settings, should the timebase be 29.97 or 30 fps? I wasn't clear from what I've read which was the right frame rate...
Thanks in advance,
Luke

Check the specs in the camera manual or the website.

Batch capture settings do not match project settings

Batch capture audio settings do not conform to project settings-
PROJECT SETTINGS ON CREATION OF NEW PROJECT:
For editing with IEEE1394 (FireWire/i.LINK) DV equipment.
Standard NTSC video (4:3 interlaced).
48kHz (16 bit) audio.
Drop-Frame Timecode numbering.
General
Editing mode: DV NTSC
Timebase: 29.97fps
Video Settings
Frame size: 720h 480v (0.9091)
Frame rate: 29.97 frames/second
Pixel Aspect Ratio: D1/DV NTSC (0.9091)
Fields: Lower Field First
Audio Settings
Sample rate: 48000 samples/second
Default Sequence
Total video tracks: 3
Master track type: Stereo
Mono tracks: 0
Please note audio setting for project 48kHz (16 bit) audio.
When I set for batch capture by creating off-line clips using the "Log Clip" option the off-line clip shows audio as
32KHZ 16-bit everyting else is correct as project settings.
Just prior to creating the off-line batch capture clip I had sucessfully captured from the same device using the same tape shot with the above settings including 48khz 16-bit audio by using standard " Capture" by setting in & out then clicking Capture>In/Out.
I've looked at capture settings etc...unable to determine to change audio settings etc or why the audio settings under batch capture do not conform to project settings...
Any ideas?
Tnx,
mick

Thanks for your reply, Harm....
Well now...having negated all the possibilities you listed, I decided to do a an actual batch capture with clips which I previously logged which reported audio at 32kHz instead of the project setting of 48kHz:
1. two clips were selected from the same device/tape ( both selected from the logging util which erroneously reported audio at 32kHz) for the batch
2. both clips captured "flawlessly"
3. both clips after the batch capture then reported audio as being 48kHz
Btw, I also did a batch capture from the same device/tape in Pr 6.x...and it reported and captured at 48khz...I must say, I must prefer the legacy version of Pr 6 for batch capture which creates a log .pbl file which can then be easily exported as a csv to and .xls etc..IMO, much more useful...and useable..
Mi dos pesos(.002US)
So it would appear there is some kind of bug in the Pr cs4 batch capture util that is erroneously reporting audio settings?
Should this go to the devel as a possible bug?
Tnx,
mick

Project Settings vs. Encoding and Encore Resolution for BR

I am editing HDV footage from a Canon HV20. When I setup my project in Pr Pro I used the recommended
default HDV project settings. Hopefully these are correct. I will be burning a Blu-Ray disc for the project.
I assume like other products I have used, the best answer here is the native resolution of your source which hopefully is what I am getting.
Now when I render it via media encoder, it asks me for the "frame size"/resolution for the Blu-Ray disc output.
Also when opening a new project in Encore, it asks for similar information. I am in NTSC land.
I am familiar with the HD standard and resolutions, and the end result of this project is a Blu-Ray disc played on HDTV's.
However what is the best media encoder resolutoin and encore "frame size" settings for a Blu-Ray disc with an HDV source?
I saw several articles and videos from Adobe about these settings and they explain what they are, but not what the recommended selections are.
As a sidenote, once you are working on a project in PP can you change the settings/resolution of the project?
Thanks,
BJBBJB1
PS...Did not know which forum to post this in as it straddles all 3 products!!

First, thanks to both of you for your help! Hmmm, I am sure the confusion is on my end....
Both of you recommend H.264 vs. MPEG 2 for encoding. If I am rendering a 1 hour 20 minute Blu-ray, for burning Blu-Rays that I need to paly on a white variety of standalone players, what is the better choice and whay? I was planning on burning to single layer Blu-Ray at best quality. I am also using 5.1 audio.
For the encoder, I was going to use "HDTV 1080i 29.97 High Quality" as my rendering preset with MPEG2.
However now I am wondering if I should be using H.264? Harm, you mention it and you also mention "square pixels". I am familiar with this concept due to my photography work and slide shows vs. video, but where is this "square pixel" setting in the media encoder??
Anna, I appreciate your comment regarding keeping it simple, however, although I am far from a PPro expert, I definitely am into Home Video and understand quality and resolutions, etc., so I want to get the best quality even if I have to do a little work.. So I'll get there. I see that clicking on that menu item allows you to choose maximum render quality. I have plenty of RAM but since I am not going SD to HD or SD to HD, perhaps it won't matter much. However I am confused by the resolution you are showing there, 1440x1080?
As far as my initial question regarding how to setup my encore project, I may have answered it myself by playing around with the media encoder box. I opened up the drop down advanced section and I see it presents the frame dimensions there. I would assume I would use the exact same frame dimensions in Encore when setting up my project.
So I guess at this point my only decisions are:
1) What codec should I use when exporting from PPro? h.264 or MPEG-2. If it matters, I am using 5.1 audio also. (thanks for all your help with that Harm months ago, it works great!).
2) What resolution to use in media encoder?
3) How do I set square pixels?
4) Once exported, in Encore, is my assumption correct that I will just use the same resolution as exported from P Pro.
Perhaps that is what Anna was recommending, keep the same resolution and then let Encore render to 1920X1080 however I would want to get all my rendering out of the way during the export process and just keep it all the same in Encore if that is a good workflow.
Thanks again for all the help!
BJBBJB1

NullPointerException when showing libraries page in JDev project settings

I'm running 10.1.3.0.4 on Windows and also Linux. Both systems are referencing the same external libraries, which are defined with relative paths to avoid naming convention problems across systems. This has been fine for at least 3 years until recently when some developers started using 10.1.3.x (as opposed to 10.1.2) on a number of machines the following occurs.
When double-clicking on the project to open the project settings page and then selecting "Libraries" i'm getting the following exception in a popup window.
java.lang.NullPointerException
     at oracle.jdeveloper.library.JLibraryManager.findJDK(JLibraryManager.java:294)
     at oracle.jdeveloper.library.JLibraryManager.findJDKMatch(JLibraryManager.java:342)
     at oracle.jdeveloper.library.LibraryReference.getLibrary(LibraryReference.java:81)
     at oracle.jdeveloper.model.JProjectLibraries.getJDK(JProjectLibraries.java:115)
     at oracle.jdeveloper.model.JProjectLibrariesPanel.reload(JProjectLibrariesPanel.java:260)
     at oracle.jdeveloper.model.JProjectLibrariesPanel.onProjectPanelEntry(JProjectLibrariesPanel.java:217)
     at oracle.ide.model.panels.ProjectSettingsTraversablePanel.onEntry(ProjectSettingsTraversablePanel.java:87)
     at oracle.ide.panels.MDDPanel.enterTraversableImpl(MDDPanel.java:926)
     at oracle.ide.panels.MDDPanel.enterTraversable(MDDPanel.java:899)
     at oracle.ide.panels.MDDPanel.mav$enterTraversable(MDDPanel.java)
     at oracle.ide.panels.MDDPanel$Tsl.updateSelectedNavigable(MDDPanel.java:1348)
     at oracle.ide.panels.MDDPanel$Tsl.updateSelection(MDDPanel.java:1216)
     at oracle.ide.panels.MDDPanel$Tsl.actionPerformed(MDDPanel.java:1210)
     at javax.swing.Timer.fireActionPerformed(Timer.java:271)
     at javax.swing.Timer$DoPostEvent.run(Timer.java:201)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
     at java.awt.Dialog$1.run(Dialog.java:515)
     at java.awt.Dialog.show(Dialog.java:536)
     at java.awt.Component.show(Component.java:1300)
     at java.awt.Component.setVisible(Component.java:1253)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
     at oracle.ide.dialogs.WizardLauncher.runDialog(WizardLauncher.java:55)
     at oracle.ide.panels.TDialogLauncher.showDialog(TDialogLauncher.java:276)
     at oracle.ide.model.panels.ProjectPropertiesDialog.showDialog(ProjectPropertiesDialog.java:223)
     at oracle.ide.model.panels.ProjectPropertiesDialog.showDialog(ProjectPropertiesDialog.java:89)
     at oracle.ide.model.panels.ProjectPropertiesDialog.showDialog(ProjectPropertiesDialog.java:80)
     at oracle.jdeveloper.model.JProjectStructureController.handleEvent(JProjectStructureController.java:111)
     at oracle.jdeveloper.model.JProjectStructureController$JProjectMenuListener.handleDefaultAction(JProjectStructureController.java:576)
     at oracle.ide.controller.ContextMenu.fireDefaultAction(ContextMenu.java:343)
     at oracle.ideimpl.explorer.BaseTreeExplorer.fireDefaultAction(BaseTreeExplorer.java:1504)
     at oracle.ideimpl.explorer.BaseTreeExplorer.dblClicked(BaseTreeExplorer.java:1841)
     at oracle.ideimpl.explorer.BaseTreeExplorer.mouseReleased(BaseTreeExplorer.java:1862)
     at oracle.ideimpl.explorer.CustomTree.processMouseEvent(CustomTree.java:176)
     at java.awt.Component.processEvent(Component.java:5253)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3955)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1774)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
It's always a problem now on linux machines and some windows versions.

I eventually fixed this by removing the following block from all the affected project files (.jpr)
<hash n="internalDefinitions">
<list n="jdkDefinitions"/>
<list n="libraryDefinitions"/>
</hash>
<hash n="jdkReference">
<value n="id" v="1.4.2_04"/>
<value n="isJDK" v="true"/>
<value n="jdkVersion" v="1.4.2_04"/>
</hash>

Project settings menu does not appear

Running OS 10.9.5 and iMovie 10.0.5 on a macbook pro.
I'm trying to set the aspect ratio of my project. I have seen several docs and threads that say I should click File->Project Settings and the project settings menu will come up. However, I can't find that. The file menu does not contain Project Settings or anything like that. Neither do the other pull down menus.
I have also seen threads describing how when I create a new project (trailer or movie) and there is supposed to be point at which I can select the aspect ratio. Nope, don't see that either. For example, when I click the big "+" that is used to create a project, I get to choose between a trailer and a movie, then I get to choose a theme, then it asks for a name and I click OK and that's it.
I have also used Command-J, which is supposed to bring up the properties menu. That does give me the movie properties, but there is no place to choose an aspect ratio. I get the same results, or lack thereof, when I do Window->Move Properties (not surprising since command-J is the short cut key for this).
Question -- is this supposed to work with 10.0.5? I have tried to find a later version of iMovie but the only one I found on the apple store site was 10.0.6.
Any ideas?????

I have finally found where it is stated that iMovie 10 does not support project properties or changing the aspect ratio.
I love Apple and would never consider switching to a PD, but really, folks, this is just a plain dumb decision on Apple's part and IMHO reflects the continuing siphoning of quality resources from OS-X/laptops/desktops to iPhone and other gadgets. yuck.
consider this discussion closed (I don't know how to close it) and I will fire up my old iMini that has OS 10.6 on it and see if I can get the job done there.
yuck.

FPS in project settings inactive ?

Similar Messages

Maybe you are looking for