"fps not real time"

I really need help.  Why is it that "fps not real time" keeps on appearing when i'm editing?  The video becomes so sluggish its frustrating.  How can it make sure it is always in "real time?" thanks a lot for your help.

You can't. AE is a compositing program, not an edit suite. Please read the help: Previews
Mylenium

Similar Messages

  • Preview not real time again

    Hello,
    1st of all - sry for my english.
    I spend a night searching various forums, but could not find clear answer.
    my client just bought HP Z820 series workstion:
    2 x Xeon E5-2620 v2 2.10Ghz
    32Gb RAM
    256Gb SSD( system and AE cashe disk)
    1TB 7200rpm drive
    Quadro K2000 vga
    AE does not play realtime preview. Always blinking red "Not real time".
    i would ask - that is normal for mashine with such configuration?
    thanks.
    PS: He have CS6, up to date (today).

    Hi,
    Not sure if this will help, but I have an issue playing back on two of my MAC workstations, even through RAM preview, if I have colour profiles enabled. When working on the MAC, I set the project to 8bit, no colour management. All the colour work is done on another PC. Once again, I have not even discussed this on the forums, I just assumed the MAC had isues of its own, and this was my work-around. If you need to get urgent playbacks for your client (and colour is not an issue yet) maybe try that?
    Pierre

  • QuotesRT and PortfolioRT are not real time stock quotes!

    I just bought QuotesRT and PortfolioRT to check real time stock quotes. But today, after comparing with another real time quotes service and Yahoo Finance real time quotes, I noticed that the stock quotes in QuotesRT and PortfolioRT are not real time at all!
    Are there any other QuotesRT and PortfolioRT users out there? Do you see the same problem? How to contact their technical support team?

    This is the developer website - http://www.litmanxp.com/iPhone/QuotesRT.html

  • Pin myself but found Google Map is not real time map (few years before)

    I recently pin a place on my event, but I found google map is not a real time map (not a few days different but few years different) It is an old map. I discovered this from the satalile map.
    Any one can help on this?
    Thanks

    I think this is a problem that affects some areas of the world, especially Asia where governments are a little more sensitive. It is the same here where from my window I can see a new bridge completed some 3 years ago that is not shown at all.
    As Larry suggests: Feedback; although the source is Google and not Apple.

  • Black magic and Adobe After effect cs6 Ram Preview not real time

    Hello,
    I'm on a MAC PRO with the OS 10.6.8 and 8Go Ram, the problem is when i turn on my preview video on the Blackmagic the video monitor is not in real time and the after effect is so slow. When i put it off (computer monitor only) it's ok but i havn't my video monitor of course....and i need it. Is there some tricks for having my black magic (1080 i 50) ON and a RAM Preview in real time ??? ! My drivers Black magic is the 9.5.3 it's the highest driver for MAC OS 10.6.8 + ADOBE CS6+ FCP7.  Thanks for the read. ( i tried update adobe, change qt library, change aspect ratio, pixel, preview ram settings, change drivers black magic and other but nothing work )

    What is the color bit depth of your project? (8, 16 or 32?) Have you changed that recently, or have you changed the frame rate or frame size of your comp?
    Performance with video preview to an external monitor is almost always related to the pure bandwidth requirements of the frames you're sending to it. If the frames require more memory, it may be slower. Frame size, frame rate, and color bit depth all affect the memory requirements of the frames.
    If none of those parameters has changed, troubleshoot the general performance of your machine. If there are other processes (look in Activity Monitor) that are using significant processor and/or memory resources, they may be causing a bottleneck for the frames getting out.

  • Composition switches to 'not real time'; incomplete render

    Hi there,
    I'm a film student at Ryerson University in Toronto, new to AE CS3, and having a problem.
    I have a 30-second composition utilizing keyframes, and all of the groundwork is done, but in the preview (both regular and RAM) it is not moving in realtime (29.97 fps) and the composition stops 5 seconds early in the RAM preview. When it renders, the image is out of synch with the music.
    Even my professor is stuck with it. I've tried disabling the layer cache and set a purge for every frame, but nothing's working.
    Any help?
    computer is a dell inspiron 1420 with 2GB RAM and plenty of hard drive space.

    Thanks Jonas and Mylenium.
    Followed every direction and insight, and none fix the problem.
    The audio file was created using Audacity; as far as i can tell it was a perfect capture; imported from .mp3 and converted to .wav with no problems on playback, both in WMP and AE during the ram preview.
    Once a .mov file, the synching comes and goes. The first 7 seconds are fine, then it slows down and goes out of synch and stays that way.
    Render report is as follows:
    Adobe After Effects v8.0x247 (Windows) render log for project VS assignment 1 (food).aep
    Rendering started on 13/11/2008 at 5:07:22 PM
    13/11/2008 5:07:22 PM: Starting composition Comp 1.
    Render Settings: DV Settings
    Quality: Best
    Resolution: Full
    Size: 720 x 480
    Proxy Use: Use No Proxies
    Effects: Current Settings
    Disk Cache: Read Only
    Color Depth: Current Settings
    Frame Blending: On For Checked Layers
    Field Render: Lower Field First
    Pulldown: Off
    Motion Blur: On For Checked Layers
    Use OpenGL: Off
    Solos: Current Settings
    Time Span: Work Area
    Start: 0;00;00;00
    End: 0;00;29;29
    Duration: 0;00;30;00
    Frame Rate: 29.97 (comp)
    Guide Layers: All Off
    Storage Overflow: On
    Skip Existing Files: Off
    Output Module: Microsoft DV NTSC 48kHz
    Output To: C:\Users\Paul\visual studies assignment 2 (food)\Comp 1.avi
    Format: Video for Windows Movie
    Output Info: Microsoft DV
    Spatial Quality = 100
    Key frame every 1 frames
    Embedding: Project Link
    Output Audio: 48.000 kHz / 16 bit / Stereo
    Channels: RGB
    Depth: Millions of Colors
    Color: Premultiplied
    Stretch: -
    Crop: -
    Final Size: 720 x 480
    Profile: -
    Embed Profile:
    Post-Render Action: None
    couple more questions:
    - Why is exporting a bad idea? The result is the same in both the render queue and export as QT movie.
    - how / where do I post the project? You guys sound like pros, that might be the best idea. I could email the files to you (less than 30mb) and if you open it in cs3, it might be easier for you guys to take a look.
    Thanks again!
    Paul.

  • After effects cs6 ram preview saying NOT REAL TIME

    Every time I try to ram preview something in AE CS6 at 59.94 fps it always previews it at only 11 fps and it says Note: zoom is not 33.3% I have my Composition settings to 59.94 fps and the quality to quarter but nothing helps? Im using 6GB of Ram and have 2 of my 4 CPU's used for it.. is there something I'm missing?

    Without proper system info, comp settings, details about your footage etc. nobody can say anything. you are merely throwing us random fragments of info but leaving out the important parts.
    Mylenium

  • After Effects cs6 RAM Preview NOT REAL TIME

    So every time I create a new composition at 59.94 fps and insert a video file (.wmv file usually) that is as well at 59.94 fps and I try to RAM Preview just the raw footage it says the same thing every time (the picture). I always change the quality to Quarter and I tried the 33.3% zoom and it doesn't help. I have the Render Multiple Frames Simultaneously box checked and I'm using 2 of my 4 CPUs and 6.4 GB of RAM available for AE... Any help?  
    My Computer specs: I have a Intel Core i5-4440 CPU @ 3.10GHz processor, 8 GB of RAM, A NVIDIA GeForce GTX 760
    If you need any other information please let me know and I'll give it to you. Thanks.

    Are you doing a RAM to preview or just pressing the spacebar? Are you new to aftereffects?
    FAQ: Why does RAM preview only play part of my composition?

  • Why is it saying fps not in real time?

    Every time i try and put footage in to after effects it lags and sometimes stops and in the top right corner it says fps not real time

    Are you new to AE? Are you doing a ram preview? After Effects uses an entirely different method of playback than a NLE or a media player. Sometimes it takes a while for your system to catch up.
    We can't know any specifics unless you give us details about your project, your system and your version of AE down to the last decimal point. Most often folks are trying to preview long segments of an AE comp at full resolution (resolution never needs to be higher than zoom factor). I have mine set to Auto in the comp window and usually have the zoom factor at 50%. You are probably just over taxing your system.

  • After Effects Playback 27 fps (Real Time) Audio is Slow

    Hello,
    I have Adobe After Effects CS 5 running on an HP Z600  8 core workstation (12 GB RAM) on Windows 7.
    When I import any video AVI, MOV, etc and I preview with RAM the audio plays slow and it reports fps: 27 (real time)
    When I link comps from premier I think it is causing lip sync issues.
    My co-worker has the identical computer and when importing the same video, his reports fps: 29.97 (real time) and audio play fine.
    I have looked around for settings that may affect this but nothing seems to help.
    Multi-threading? Open GL issue?
    Any Ideas?
    Thanks,
    Greg

    > Sorry, I just figured it out.
    If you think that what you just figured out might be useful to others, feel free to elaborate here. If not, then I'll go ahead and remove this thread if you don't mind.

  • RAM Previews No Longer Real Time

    Work computer.   Mid 2010 Mac Pro with 64GB of RAM.  Running After Effects version 11.0.4.2.   Multiprocessing off.   AJA Control Panel v3.
    1920 x 1080 comps, 29.97 fps, no 3D.
    The Mac was running Mountain Lion and RAM previews were FINE.  Zero issues.             Ever.
    The computer was upgraded to Mavericks 10.9.5.      I use the term upgrade loosely, BTW.       Now  ...  RAM previews no longer play in real time.  Most I get - and it fluctuates - is 19, 20, 23 frames per second, never 29.97.    Sometimes it blasts all the way up to 40, 45, 47 like it’s playing catch-up, but that’s rare.
    - Restarted the computer. No change.
    - All projects.   Makes no difference, old legacy projects or new.
    - Even simple 1-layer projects with simple position animation, no effects - not real time.
    - 8 bit mode, not just 16 or 32 bit.
    - Color management both on and off.
    - Simulate output on and off.
    - Preferences -> Video Preview was set to AJA, so I tried Computer Monitor Only.  That doesn’t work either.
    - Full Rez, Half, Quarter. . .. . doesn’t matter.    Never real-time.
    I've seen others ask about this issue but none of the posts ever resulted in "you need to set 'this' to 'that'" etc.        Have any suggestions? 
    Thank you,
    Marc

    Marc Trzepla wrote:
    I am not a programmer but I've always run under the assumption that things "get faster", not slower.  The fact that what once worked flawlessly was crippled by an "upgrade" boggles me.     
    Mavericks and Yosemite have both have quite a number of issues when folks upgrade to them.
    Apple is really starting to bother me lately. First the attitude evident in the Final Cut debacle, then the Mac Pro annoyance, and now the OS upgrade issues... I know smartphones are making them boatloads of money, but they really seem to be neglecting their professional users who've been with them for years before iPhones were even a thing!

  • Display real time data on a plot in a sub VI and main VI

    I am building a program to measure and plot real time data. Program has several steps so I build few Sub VIs to make it simple. My problem is I am plotting real time data in my SUB VI(it works fine), but in my main program when I try to get the same plot its not real time data plot. Plots appear at the end of the program.  All tips and help would be greatly appreciated. Thanks
    I have attached my main VI and Sub VI
    Solved!
    Go to Solution.
    Attachments:
    main VI.jpg ‏116 KB
    Sub VI.jpg ‏242 KB

    LabVIEW program is based on DATA FLOW, now, until the subVI will finish execution (while loop will be stopped), the execution in Main VI will not proceed any further.
    If you can pass the reference of 'XY Graph' inside the subVI, you'll be able to update the plot (placed on MAIN VI) from within subVI.
    Find attached example for your reference.
    I am not allergic to Kudos, in fact I love Kudos.
     Make your LabVIEW experience more CONVENIENT.
    Attachments:
    Example [LV 90].zip ‏26 KB

  • Real-time database or non real-time database

    I know the scheduling mechanism in Oracle database is somewhat like the Linux OS which is not real-time. Does Oracle provide real-time database which has some real-time scheduling guaranteeing each user transaction to meet with a deadline ? Thx a lot.

    The Berkley DB that Oracle owns has been ported to QNX which is a real-time operating system.
    http://www.oracle.com/technology/documentation/berkeley-db/db/ref/build_unix/qnx.html
    Why, out of curiosity, are you looking into Oracle for a real-time system? That implies that you're running a real-time operating system on your servers, which is certainly unusual. I've heard of some ports of 9i to real-time operating systems, but that would certainly be unusual.
    Justin

  • Real-time NI 9239

    Hi All,
    I have a DAQ 9172  with two NI 9239 module. I would like to measure 3 stator current and 3 stator voltage and also the rotor speed (an analoge input) of an AC machine to estimate the electromagnetique torque in real time. The estimatior is an open loop one but it needs some feedbacks and also function transfer as I have used in Matlab Simulink. I have control and simulation and interface toolkit but not real-time toolkit. Please help me haw can I do that in real-time.

    Hi,
    The Cdaq-9172 are not a real-time controller, if you will use it in real time mode (with determinitic loop) you need have a computer with a real time OS.
    Windows are not a real time OS, but you can optimize it with your application.
    You can see below differents notes about real-time.
    http://zone.ni.com/devzone/cda/tut/p/id/3938
    http://zone.ni.com/devzone/cda/tut/p/id/2111
    http://zone.ni.com/devzone/cda/tut/p/id/5038
    Regards,
    Christophe S.
    FSE East of France І Certified LabVIEW Associate Developer І National Instruments France

  • Jmx with java real time

    Hi David,
    my question for now is very general.
    can we use jmx with jrts???
    Gabi

    Hi Gabi,
    Some additional information:
    - JavaRTS does support the JMX protocol
    - JavaRTS supports most of the monitoring & management functionalities provided
    by HotSpot MBeans
    - some functionalities are disabled by default because they would create jitter (like
    getting the stack trace of java threads). Default can be changed through the
    realtime.debug MBean)
    - JavaRTS comes with a few additional realtime specific monitoring beans.
    Note that JMX relies on threads to do its work. These threads are not real-time.
    Hence, if the realtime threads (including the RTGC) are consumming all the CPU,
    you may not be able to call MBeans to see what is happening and take corrective actions.
    Bertrand.

Maybe you are looking for