FR 11.1.1.3 "export to query ready mode" option not working

Hi All,
We have a scenario where few users are not able to use the "export to query ready mode" option after running an FR report.
For some reason the save dialog box doesnt open or doesnt pop up when this option is ticked.
Note that this issue comes only on running FR Essbase reports. (for FR HFM reports it works fine)
Does any body have any resolution to this.
Kindly advise.

Hi,
Can anybody explain me the option of this *"Export in Query ready mode"*???
Is there any document through which I can understand???
Thanks
Sourabh
Edited by: CM on May 11, 2011 6:32 AM

Similar Messages

  • Export in Query ready mode - Office 2010 not working

    Hello everyone,
    I am facing the following problem with Hyperion Financial Reporting:
    When I display a Financial Reporting report in Workspace and click on "Export in query ready mode", a new Excel session is launched with an empty sheet and nothing else happens. Eventually Internet explorer displays a message "The application hasn't started yet. Do you want to wait?" This cycle repeats forever unless I close the small IE window that popped up.
    We are using Windows 7 and Office 2010. The Smart View version is 11.1.1.3.500 (Build 008) and Workspace is version 11.1.1.3.0.956.
    Would be very grateful if anyone can help me solve this issue as this function is very useful.
    Thanks,
    Martin

    Alright,
    There is some development with this problem, but unfortunately another one arose.
    To solve the issue I had to disable the option "Protected mode" for the Internet Zone of Internet Explorer. Although the App server is on the local intranet, to launch Excel the web page uses the protocol oraclesv:// which appears to IE as "Internet" address.
    When I disabled protected mode, some of the reports started to open normally in query ready mode. Unfortunately for some other reports Excel crashes. I.e. I open the report in workspace and click "Export in Query ready mode". I see Excel open up and the cells are filled in with members, etc. but at some point Excel just crashes and restarts. This can be destructive if I am currently working in some file.
    And now the interesting part: I tried to find the reason why some of the reports are ok and some crash excel. It turned out that this depends on the amount of data in the report. For smaller reports (i.e. less than 50 rows) there is no problem, but for larger reports -> excel crashes.
    I hope this explanation is helpful for someone else, as it took me quite a while to find the problem.
    Martin

  • Export in Query Ready mode not Working.for FR reports in HTML view

    Hi,
    When we run the FR reports in HTML view in Workspace,there is an option at the bottom to "Export in Query Ready mode",it's not exporting the report in Smart view excel .
    But some of our users are able to export the report in SV.We are using EPM 11.1.1.3. I have checked the IE 7 settings with other users and it's same.
    Does anybody has any idea what could be the cause?
    Thanks in advance.
    BC

    It is the behavior, Query ready mode will only pulls the members which are in Essbase (no FR calculated fields)
    Regards
    Celvin
    http://www.orahyplabs.com

  • Export in Query Ready Mode get Essbase Error 1020047

    Through Workspace when in a Financial Reporting Report, when we click on Export in Query Ready Mode, we get the following error in Excel and then Excel closes. 'Essbase Error (1020047): A column item [%] conflicts with a row item[%].'
    Any ideas?
    We are using 11.1.2
    Thanks.

    This is bug and fixed in 11.1.2.1.102 Smart View

  • How to hide/disable option "Export In Query Ready Mode" in HTML FR reports (workspace)version 11.1.1.3

    Hi all,
    is there a way to hide or disable the option "Export In Query Ready Mode" for HTML FR reports (workspace) version 11.1.1.3.
    Thanks in advance!
    Regards
    Tej.

    Hi Tej,
    The feature, "to hide or disable the option "Export In Query Ready Mode"  has been introduced in Financial Reporting 11.1.2.3.
        Logon to EPM Workspace.
        Open menu File > Preferences > Financial Reporting.
        The new option, called "Disabled" is available for Query Ready Mode. If selected will disable Query Ready mode completely.
    Thanks,
    Krish

  • How to hide/disable option "Export In Query Ready Mode" in HTML FR reports

    Hi all,
    is there a way to hide or disable the option "Export In Query Ready Mode" for HTML FR reports?
    Thanks in advance!
    Regards
    André

    Yes, it is a cool feature but I didnt ask for it :-) Besides it doesnt work completely without errors/warnings:
    If i click on the link and then on open (save xls works fine) an error message occurs: "Could not open 'http://<servername>/hr/hrget/modules/com/hyperion/reporting/web/office/HROfficeReport.jsp/test.xls?gridname=grid1&iInstanceId=18885&format=excel.2002&viewAs=query&previewDone=true&promptDone=true'"
    After click on OK another error message occurs:
    "Microsoft Excel cannot access the file 'http://<servername>/hr/hrget/modules/com/hyperion/reporting/web/office/HROfficeReport.jsp/test.xls?gridname=grid1&iInstanceId=18885&format=excel.2002&viewAs=query&previewDone=true&promptDone=true'. There are several possible reasons:
    The file name or path does not exist.
    The file is being used by another program.
    The workbook you are trying to save has the same name as a currently open workbook.
    After click on OK the XLS export opens correctly but the messages are annoying. Perhaps anybody can help me ;-)
    Thanks and kind regards
    Andre

  • Export to query ready mode

    In version 11.1.2 when exporting a report to query ready mode from workspace we are getting an HRdialogue error message. However when I turn off the POV preview in user preferences it works. Anyone else experiencing this?
    Thanks,
    Jeff

    Hi,
    Can anybody explain me the option of this *"Export in Query ready mode"*???
    Is there any document through which I can understand???
    Thanks
    Sourabh
    Edited by: CM on May 11, 2011 6:32 AM

  • Export in Query Ready mode not working in 11.1.2.1

    Hi,
    I have created a report with 3 grids;
    Grid 1 - populates employee information,
    Grid 2 - populates employee salary
    Grid 3 - calculation of Grid 1 and Grid 2.
    In Report I am able to see the data, but when I am using the "Export in Query Mode" option the report is exporting into Excel where as Grid 3 has NO more formulas.
    Please suggest by modifying the settings/options in Excel will resolve the issue or is it a bug?
    Thanks in advance!
    Regards,
    VA

    It is the behavior, Query ready mode will only pulls the members which are in Essbase (no FR calculated fields)
    Regards
    Celvin
    http://www.orahyplabs.com

  • FR (11.1.2.1) export in query ready mode with default ALIAS

    I am not seeing default ALIAS when exporting my FR from workspace to excel using Query Ready Mode.
    Any help is appreciated.
    Thanks

    Did you try changing the alias once the report is exported?
    Regards
    Celvin
    http://www.orahyplabs.com

  • Cannot export Financial Report from HTML view to Query Ready Mode

    Hi,
    I am opening Hyperion Financial Reports in Workspace in HTML mode. On the bottom right of the report, when I click on "Export in Query Ready Mode", the report does not get transported to excel. Rather, a message flashes for a split-second and disappears. The message is "The address is not valid". Can anyone please advise as to what should I do to get the report in excel? I did notice that there is also File->Export->Excel->Fully Formatted Grids & Texts, but we want to get it in Query Ready Mode.
    Version is 11.1.1.3. Thanks for any suggestions.
    ABG

    We have resolved this issue. The problem was that Smart View installation/configuration was not complete on the machine which I used to launch report into Query Ready Mode. Once Smart View was fixed, we were able to convert report from HTML view to Query Ready Mode.
    ABG

  • FR error exporting to  excel Query ready mode

    We are getting an error while exporting to Query ready mode. Error says report is not a valid single file web page.
    but its working for other user.
    any clue.

    check this might help :
    Re: "not a valid single file Web Page"

  • Query on database column not working

    Hi
    i have a block which has around 40 columns.the block is based on a table which has more than 20000 records.When i try 2 make query on a Database column in Enter-Query mode its not working.It fetching all the records instead of the respective records
    THe block property is said to yes
    i have even set the query allowed,only propery of the column to YEs
    Can any one help me out of this??? do i need to set any other property???

    Thanks a lot for james and THomas and to all. The error is that i have missed the bracket for OR in my where condition ...Now im able to query all the columns.
    Thanks very much...
    I have one more doubt .i have a requirement in which when the user goes to the child block and makes a query is it possible to bring the associates parent records..wht code or trigger we need to rite ?
    normally we do for parent block when we query we populate the child. is this can be done?

  • Webi report on OLAP Bex query -  Cost element Hierarchy not working Drill down

    Hello,
    We have a BO report on Bex query, Not on universe, we have a Hierarchy for Cost Element Group, and we are expecting the Drill down functionality for that in BO report, but it does not.
    Webi report on OLAP Bex query -  Cost element Hierarchy not working Drill down
    Any pointers how to do it please
    Thanks
    Krishna

    Hi,
    WebI reports on BEx source don't use same Drill feature as other sources, it's replaced by expland/collapse of hierarchy nodes (documented in WebI user guide in § "24.1 Drill defined"). This means you have to create query which selects all hierarchy sub-tree you plan on exploring later in report, otherwise if no data is available under a node there will be no '+/-' sign to visit this part of tree.
    You could try first to select "All members" from hierarchy in QueryPanel and see if behavior in report suits your needs. Then you should restrict hierarchy member selection to what's really needed to avoid performance issues.
    Regards,
    Loic

  • Web Template - Variable & Export to Excel Web Items are not working

    Hi Experts,
    In a Web Report & Web Template Variable & Export to Excel Web Items are not working ; Any body have any idead ?
    Do i need to write any HTML code to funtion those web items.
    Thanks
    KAruna

    Dear Karuna,
    Review your default template. Probably is 0ANALYSIS_PATTERN.
    Reactive the version D and check again.
    Also, you are able to modify the webitems on Export to Excel on 'BUTTON_TOOLBAR_2' -> Button list number  4.
    And, you are able to check the 0ANALYSIS_PATTERN_EXPORT, in case of configuration.
    If you want to remove/add new items, I suggest you to save as another name. SAP does not allow to modify delivered objects
    ex:. 0Objects.
    Best Regards,
    Edward S. John

  • Exporting Crystal Report to HTML is not working in Windows 7

    Hi Sir,
    I am trying to export Crystal Report to HTML format using VB.NET code. Functionality is working fine at Windows XP Environment (Save to Disk, Open an Application and Email Attachment). But the same functionality is not working at Windows 7 Environment (both 32-Bit as well as 64-Bit).
    Below is the code to Exporting Crystal Report to HTML in VB.NET.
    Dim CrDiskFileDestinationOptions As New DiskFileDestinationOptions
    Dim CrFormatTypeOptions          As New HTMLFormatOptions
    Dim vFormat As Integer
    Dim CrExportOptions As New ExportOptions
    Dim vRdReport As New ReportDocument
    Dim sfd As SaveFileDialog
    Dim vFileName As String = Nothing
    vRdReport = vRptSource
    sfd = New SaveFileDialog
    If Not (vRptPath = "") Then
        sfd.InitialDirectory = vRptPath
    End If
    sfd.Filter = "Webpage, Complete(.htm;.htm)|.htm|Web Archive, Single file(.mht)|.mht|Webpage, HTML only(.htm;.html)|.html"
    If sfd.ShowDialog = DialogResult.OK Then
        ' Set the disk file options.
         CrDiskFileDestinationOptions.DiskFileName = sfd.FileName.ToString()
    Else
         Return
    End If
    CrExportOptions = vRdReport.ExportOptions
    CrFormatTypeOptions.HTMLFileName = vFileName
    CrFormatTypeOptions.HTMLEnableSeparatedPages = True
    CrFormatTypeOptions.HTMLEnableSeparatedPages = True
    CrFormatTypeOptions.HTMLHasPageNavigator = True
    CrFormatTypeOptions.UsePageRange = True
    With CrExportOptions
                        .ExportDestinationType = ExportDestinationType.DiskFile
                        .ExportFormatType = ExportFormatType.HTML32
                        .DestinationOptions = CrDiskFileDestinationOptions.DiskFileName
                        .FormatOptions = CrFormatTypeOptions
    End With
    vRdReport.Export()
    Catch ex As Exception
            MsgBox(ex.ToString)
    End Try
    Code working fine at Windows XP, But it is not woking in Windows 7 environment.
    Please can anyone share your valuable thoughts or ideas reg. this.
    Thanks in Advance
    Deivanayaga Perumal D.

    user13509659 wrote:
    Run this code to reproduce the issue.Which issue?
    It looks like inheritance is broken in the component hierarchy for JFrame in Windows 7 JDK 1.6.0_23-b05. The only thing remotely related to inheritance in your code snippet is the WindowListener, which does little. See camickr's advice about built-in exit management.
    EDIT - using the post title as a clue, I realize you may be talking about the component hierarchy, and whether the contentPane's background is visible through the upper layers. Instead of guessing, I'd prefer you describe your "issue" accurately (observed vs expected behavior).
    Edited by: jduprez on Feb 10, 2011 1:01 PM

Maybe you are looking for

  • How to Create a Flat File using FTP/File Adapter

    Can any body done workaround on creating the Flat file using FTP/File Adapter?. I need to create a simple FlatFile either using of delimiter/Fixed length. using the above said adapters we can create XML file, i tried concatinating all the values into

  • Can't Open ACR files from Bridge in Photoshop CC 2014

    I Can't Open ACR files from Bridge in Photoshop CC 2014.  I have uninstalled the programs, and all other versions of PS several times, but no matter what I do, I can't open a raw file I have opened in Bridge, in PS CC 2014. I have to click Open in Ph

  • GR quantity check against Production Order in MB31

    Hi Experts, How to check GR quantity against Production Order (101) can not be greater than Confirmation quantity for the Production Order in MB31. Regards, Praful Mankar

  • Jstl inputText takes apostrophe (single quote) as end of string

    Hi, I run into a problem with jstl when apostrophe(single quote) is in input text: <h:inputText id="input1" styleClass="field" size="20" maxlength="20" value="#{bean.property1}" /> When user inputs string contains apostrophe (single quote), for examp

  • Worflow spaces option in Camera Raw.

    It would be great, if the Adobe team brings to us the possibility to use other spaces in Camera Raw, like the team did it in Lightroom. Maybe in the near future ?