FR reports error-5200: Error executing query

I'm working on FR-11.1.1.3.0238 version. i'm facing issues with some of the reports related to planning application db while launching reports in workspace. Where as the reports are opening with out any issues in FR studio and there is no error message recorded in the studio.The error message is recorded in the workspace related log file.
I thought that there might be any pov corruption issue so i ran the ManageUserPov utility as well but there is no luck.
Let me know the cause of this error message and also the resolution for it.
Below is the error message info,
*12-12 09:29:10 ERROR jsp     5200: Error executing query: java.lang.ArithmeticException: / by zerojava.lang.ArithmeticException*
com.hyperion.reporting.util.HyperionReportException: 5200: Error executing query:  java.lang.ArithmeticException: / by zerojava.lang.ArithmeticException
     at com.hyperion.reporting.webviewer.WebDynamicReport.execute(Unknown Source)
jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrrunjob._jspService(__hrrunjob.java:1411)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.hyperion.reporting.webviewer.HRLocaleFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:531)
     at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:459)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:159)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:180)
     at jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrcheckforpovorprompt._jspService(__hrcheckforpovorprompt.java:1486)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.hyperion.reporting.webviewer.HRSecurePagesFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.hyperion.reporting.webviewer.HRLocaleFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3242)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Thanks in advance
Edited by: kailash on Dec 13, 2012 5:59 PM

Neeraj,
In the FR report server the settings are as you suggested except the TcpTimedWaitDelay = 60, this setting is set to 30.
The same settings are there in Essbase and Planning servers.
So i would like to know what exactly is all about the setting and the possible cause of the problem. It would be very helpful if i can get the cause.
Thanks in advance
Edited by: kailash on Dec 19, 2012 9:03 PM

Similar Messages

  • Hyp FR Error: 5200 : Error executing query.  Exceed max row number 100000

    Hi,
    I am getting the error
    5200 : Error executing query. Exceed max row number 100000
    when I run the report on Financial Reporting. It gives the same error when run on Workspace.
    Have you guys encountered this error before? What are the best ways to tackle it? Help is much appreciated guys.
    -- Adi
    Edit 1 - I tried to simplify the parameters but I still get the same error making me suspect that the issue is not the 100000 row issue.
    Edited by: Aditya26 on Apr 11, 2012 9:02 AM

    Hi Adi,
    This is from My Oracle Support:
    How to Increase Row Limit to Avoid Error "Exceed Max Row Number 100000" [ID 866832.1]
    Modified 23-FEB-2012 Type HOWTO Status PUBLISHED
    In this Document
    Goal
    Solution
    Applies to:
    Hyperion BI+ - Version: 9.3.1.0.00 to 11.1.1.3.00 - Release: 9.3 to 11.1
    Information in this document applies to any platform.
    Goal
    How do you increase the maximum row limit to avoid the error "5200: Error executing query: Exceed max row number 100000"?
    Solution
    1.Edit \Hyperion\common\ADM\<version>\lib\ADM.properties as follows:
    From MAX_ROW_NUMBERS=100000 to MAX_ROW_NUMBERS=500000
    If you are running extremely large reports, you can increase the limit.
    2.Restart Reporting and Analysis services.
    For version 11.1.2.x
    The path of ADM.properties file in these versions should be located under:
    %Oracle_Home%\Middleware\EPMSystem11R1\commo\ADM\11.1.2.0\lib
    Cheers,
    Mehmet

  • Error in while Executing Query in the Query Designer

    Hi,
    I  created info Set based two  info object and  three Data Store Objects. and join condition is Left Outer Join.
    there are Business Partner info object, CRM  BP Sales View Info Object and Data Store Objects are  BP: Roles (0BP_ROLE),Partner: Industries(0BP_IS),CRM Marketing Attributes for Business Partner(0ATR_DS01)
    I given some Selection Parameters while executing query in the Query Designer. in That i given city is selection parameters
    and i creted variable for this info object.
    it gives the Error Messages
    Beim Lesen der Daten sind Fehler aufgetreten. Navigation ist möglich
    Der Wert "New Delhi " von Merkmal 0CITY40 enthält an der 10.ten Stelle einen Fehler
    it is very urgent , can any one help me regarding this.

    Hi Reddy,
    The Error message in english is this
    While reading the data mistakes have appeared. Navigation is possible
    The value " New of Delhi " from sign 0CITY40 contains a mistake at the 10.ten place
    and i think you need to run the change run and run the report with out selecting the variable option.and navigate in the report by filtering the report for your requirement.
    Try this and let me know.
    Thanks,
    RK

  • Getting error when we execute query in RSRT1

    Hi Gurus,
    I Loaded Transaction data in "0CCA_C11" cube and also loaded master data too.
    but when i execute query in RSRT1 i am getting error message
    1) Could not enter feature 0COSTCENTER__0PROFIT_CTR with SID 133 into table /BI0/SIOBJNM
    2)System error in program CL_RSR and form GET_CHANMID-02- (see long text)
    3)Error when generating dataProvider.
    For 0COSTCENTER i loaded master data but for '0PROFIT_CTR' i am unable to load Hierarchy data because still the request is yellow even showing 58 from 58 records.
    can any once can help me to soleve this issue.
    Thanks in advance.
    Raju.k
    *points to be assigned.

    Raju,
      Try replicating your hierarchy DS and reload data.
    hope it helps,
    balaji

  • Error 0DAT while executing query

    Hello All,
    While executing query in query designer I am getting following error.
    Component 0DAT version A does not exists in the database.
    Can any one please let me know how to rectify this error.
    Points will be rewarded.

    Hello,
    Thanks for your prompt reply.
    I am looking for 0DAT in BC (object type) but could not able to find it.
    I am new in BW :
    Do I have to search BC in r/3 and replicate in BW then install and activate it ?or I will find in BW only?

  • Why JRC executes query two times? (reports.queryengine(?:?) - Executing query: ...)

    Hello! Using JRC. While creating the report for viewing, I noticed one interesting thing. Why JRC executes query two times AND first time is executed with default parameters AND if default parameters are NULL the query can be invalid (even if it is marked to convert all database NULLs to defaults in Report Options).
    <!break>
    1. Why do you need to execute query the first time with these default parameters, which are later set to the others? We need to make some valid default parameters to make everything work. Also it is not efficient to execute unnecessary query.
    2. If I'm wrong could you explain please? If I'm right, is it a bug and when do you fix it?
    Waiting for answer,
    Anton Stalnuhhin
    Java-developer, Webmedia AS

    .

  • Error 5200 Error executing query

    The rest of the message reads...
    "...the form grid is invalid. verify that all members selected are in Essbase. Check log for details.com.hyperion.planning.hspexception.?
    I am using Hyperion reports to connect to a Hyperion Planning application. I noticed then I select only one member from this dimension, I do not get this error message and I get the report as what I wanted but if I select level 0 or descendants from the dimension, I get the error. I have applied some suppression to the rows and this form grid is also extracting some cell text information.
    Please help. thanks.

    I did a full refresh from planning to essbase and I still got that error. It seems to happen to only a certain branch of the dimension.
    Is there a way to select level 0 of a particular branch of the dimension? (similar to calc script @relative() function)
    The error message does not appear if I select only one member and the dimension I am reporting is huge, too tedious to hunt down the errant member/branch.

  • Error occurred when executing query involving cross join or outer join

    Hi,
    I tried to execute the following query:
    select count(*)
    from
         po,
         invoice,
         table(xmlsequence(extract(invoice.content, '/CommercialInvoice/Body/LineItemDetails/LineItem'))) invoice_line_item
    where
         extractValue(po.content, '/PurchaseOrder/Header/DocumentID/RID') =
         extractValue(value(invoice_line_item), '/LineItem/Product/PurchaseOrderIdentifier/documentCreatorIdentifier')(+)
    It produced the following error:
         Error: ORA-00936: missing expression
    Then I change the query to:
    select count(*)
    from
         po left outer join
              invoice cross join
              table(xmlsequence(extract(invoice.content, '/CommercialInvoice/Body/LineItemDetails/LineItem'))) invoice_line_item
         on
              extractValue(po.content, '/PurchaseOrder/Header/DocumentID/RID')
              = extractValue(value(invoice_line_item), '/LineItem/Product/PurchaseOrderIdentifier/documentCreatorIdentifier')
    It produced the following error:
         Error: ORA-00904: "INVOICE"."SYS_NC0012900130$": invalid identifier
    If I simply the query to:
    select 1
    from
         invoice cross join
         table(xmlsequence(extract(invoice.content, '/CommercialInvoice/Body/LineItemDetails/LineItem'))) invoice_line_item
    It also produced the following error:
         Error: ORA-00904: "INVOICE"."SYS_NC0012900130$": invalid identifier
    What is the cause of the problem? How to resolve it?
    The version I am using is 10.1.0.2.0 on Windows. Any help would be much appreciated.

    Hi,
        Recently we went for BW upgradatiaon (BI7.0) , the error you are facing could be due to the following issue,
        If infoobjects are used in infoset as infoprovider ( in BW3.5) after upgrade this infoobjects will not be selected automatically as infoproviders. So it will not be available for Infoset.
    Please check whether any infoobjects are used as infoprovider, if so manually change them as infoprovider ( In BI7) and activate.
    Since, few reports are working on the infoset , this could be those reports are not using the fields from the infoobjects. so it is working it seems.
    Please check and let me know.
    Thanks,
    V.Senthil

  • Error message in executing query

    Hi
    There is one query which was working fine initially but sudeenly after making some changes it is giving the error message
    Diagnosis
    This internal error is a targeted termination since the program has an
    incorrect status.
    I tried RSRT but it still does not help, giving the same message.
    Please advise is there any other way to get this query working again.
    Thanks in advance.
    Regards,
    Kate.

    Hi Bahnu,
    Thanks for your reply. I am able to access the query definition in the Bex analyser and I am able to execute it till the selection screen but after that it gives me the message:
    System error in program CL_RSDM_READ_MASTER_DATA and form
    sidvaldirect_read2
         Message no. BRAIN299
    Diagnosis
    This internal error is a targeted termination since the program has an
    incorrect status.
    Procedure
    Analyse the situation and inform SAP.
    I think the problem happened when someone else was trying to edit the query from Bex Designer when I was trying to
    edit in the Bex Analyser.
    Can you suggest what can be done to resolve it.
    Even I tried creating a copy and executing it but both give the same error.
    Many Thanks.
    Kind Regards,
    KAte.

  • 5200 : Error in executing  query -- Hyperion Financial Reporting

    Problem in accessing the Hyperion Financial Reports.User is having full access and able to access all the folders except one folder(Legal Folder reports). We are getting 5200: Error Executing the query error. Recently we have upgraded Hyperion to 11.1.1.3 version . Before upgrade user is not facing the problem. After Upgrade user is getting these errors while accessing the reports. we did research and found in "Error 5200: Error Executing Query" When Viewing Financial Reporting (FR) Reports". Is this error is relevant to the Information provided in Metalink and also can you please tell us is there any impact on doing the solution provided in the below. Why is this error is coming is any preferences needs to be changed.Please help us on this.
    Error Description:
    5200: Error executing query
    Servername/ApplicationName/DatabaseName/Error(1007090) Unknown Member name [Current Point of view for years] in Outline Query
    Doc ID 1107142.1:
    Possible Cause 1:
    If members have recently been added, moved, or deleted from the data source, Essbase, HFM, or Planning, the existing User POV records become out of sync.
    The User Point of View record uses indexing to identify the member. If the index changes because of changes in the outline, the User Point of View record no longer points to the correct location in the outline.
    To resolve the issue, you need to run the ManageUserPOV utility on a Windows server that has the Financial Reporting Reports Server, or in a Unix or Linux environment, has the Financial Reporting Print Server installed.
    You will need to provide a BIPlus Global Administrator user ID and password to run the utility.
    The utility will provide the correct syntax to run the command.
    1. In \Hyperion\products\biplus\bin\ManageUserPOV.properties, specify the following parameters:
    a. ReportServer
    b. DatasourceUser
    c. DatasourcePassword
    d. User
    e. Datasource (You can find the datasource in Workspace under Tools>Database Connection Manager in the Name column.)
    2. From the command line, cd to Hyerion\products\biplus\bin
    3. Type in "ManageUserPOV" without the quotes. The executable will read the parameters previously set in the ManageUserPOV.properties file.
    Thanks,
    Naresh.

    Take a look at this: http://adistrategies.com/index.php?loc=knowledge1&item=291
    Hope it helps.
    Mehmet

  • 5200: Error executing query: The data form grid is invalid.

    Hi,
    I am getting this error " 5200: Error executing query: The data form grid is invalid. Verify that all members selected are in Essbase. Check log for details.
    com.hyperion.planning.HspException;hasPovDims=1;povXML=<?xml version="1.0"?><datasources><datasource name="Profit " dsid="228af2c3_129ca3dd85c_-77b1" allowEdit="1"><dim name="Period" dimIndex="1" dsName="Profit " keyDimName="Period" memberName="Apr" displayName="Period: Apr"/><dim name="Year" dimIndex="2" dsName="Profit " keyDimName="Year" memberName="FY10" displayName="Year: FY10"/><dim name="Entity" dimIndex="5" dsName="Profit " keyDimName="Entity" memberName="9999" displayName="Entity: 9999"/></datasource></datasources>"
    I have checked that both the systems essbase and planning are same. nothing's different. still i cannot find the exact reason why the report is not working.
    can any please help me.
    btw, i am using Hyperion Planning 9.3.1
    Thanks,
    BIMS

    Hi
    You probably deleted some members from outline that are used by report
    I would recommend you to open you report/grid via rep.client and try to find which elements are abcent
    Regards
    Alexander
    Edited by: Softperson on 19/8/2010 17:38

  • 5200: Error executing query: in report (Workspace - Hyp Financial Report)

    I tried to open a report in the workspace and this error appeared only in an environment in other open properly, the reports are the same.
    Appears Only "5200: Error executing query: in report"
    What can I do?

    The below link may be provide some insight:
    5200: Error executing query: Invalid Item ID. Pls help
    Also check log file for details about the error you are getting so as to get more information.

  • 5200:Error Executing Query

    Hi,
    I am getting below error while running a report in FR.
    5200:Error Executing Query:
    Could you please let me know what is the problem and how to resolve it.
    Thanks,

    Hi,
    This might be due to corrupt POV this can be resolved by just deleting POV for the use and again setting it up.
    Regards,
    Gyan

  • Error executing Query - Workspace report error.

    Hi All,
    One of our user is getting "5200:Error executing Query" message while running the report in Hyperion Financial reporting workspace,how ever if I run this report with my login on his system I am able to run it.
    Could you please put some flash on it what may be the reason behind the same.
    waiting for your reply.....
    Thanks,

    Hi, in general the 5200 error means that the user cannot connect to run the report.
    What this means is that the user either doesn't have:
    - the necessary Workspace permissions, or
    - the necessary data source permissions to run the report. This can either be correct essbase permissions or perhaps the report uses a member they do not have access to see.
    I think from memory there should be a Details button on the error message which the user sees which should provide more detailed information. Can you confirm and reply back?
    Cheers, Iain

  • HFR Issues - "5200: Error executing query: Invalid Item ID"

    Hi All,
    We are using Hyperion HFM application 11.1.1.3. Recently we have upgraded the Oralce Database to 11.2.0.2 and reconfigured the HFM application with this new database version. When I tried to run the Financial reporting through the HFR studio, I am getting error message - "5200: Error executing query: Invalid Item ID". Please could you help me to resolve this issue.
    Thanks,
    Aravindh K

    This was due to an invalid default Point of View for the user that was incompatible with the particular report.
    Change the Preferences to User Point of View Preview and run the report again.
    File > Preference > Financial Reporting > Select Preview "ON" under USer Point of View box.
    Re-run the report and select the desired POV.
    This will prompt the user to change their POV every time he or she opens a report. They can select the correct POV and the report runs correctly.
    You can turn off later. Let me know if it fixed this issue.

Maybe you are looking for

  • CS4 Master Collection won't accept product Code. Why?

    I'm trying to install my CS4 Master Collection so that I can upgrade to CS5 but my product code won't allow me to continue. I only have it installed on one other computer. It doesn't provide an explanation, it only shows a red "X" after the code that

  • Pivot table in RTF templet

    Hi, I am new to BI Publisher and need a help to create a templet having pivot table in it. When i am trying to build pivot table in MS Word addins ,it's not allowing me to add more than 5 rows. But i have around 12 attribute columns , 1 measure colum

  • Save as text not working

    When I try to save a PDF as text, my document is empty. Also, it appears I only have the option of saving as accessible text, not plain text. I am using the latest version (8.1.2). Anyone able to do this successfully?

  • First letter shortcut in app list view - Lumia 800

    Hi all,   I recently downloaded a couple of apps of my Lumia 800 and I noticed that the app list view has been rearranged in to groups by the first letter of the apps name. Although I find it functional and overall it looks well, I'd like to know if

  • Why won't Photoshop save anything?

    For some reason Photoshop won't save anything. I'm using the older CS6 version. It was working previously but one day it went kaput. When I go to save something, no dialog comes up and Photoshop is pretty much frozen. I can click to bring the Photosh