Frame By Frame Image Moving

In iMovie '11, I have a video with an image in it, is there a way I can edit this image frame by frame movement?

I don't fully understand your question, but if you are asking if you can edit to the frame level, the answer is yes.
First, go to iMovie/Preferences and put a check mark in "Display Time as hh:mm:seconds:frames". This lets you edit to the frame level, rather than to the tenth of a second.
Next, you can make it easier to select individual frames by setting the project thumbnail slider to 1/2 second.

Similar Messages

How do you add a Christmas frame to an image in Elements 10?

How do you add a Christmas frame to an image in Elements 10?

In PSE 10, go to Full Edit mode.
Open your image.
Open the Content panel.
In the first dropdown choose "By Event".
In the second dropdown choose Christmas.

How do I delete a few frames of my image from the beginning?

There are a few frames of my image in front of the first title. I don't know how to delete these frames. I want my title to start without anything in front of it.
I'm using PrE 11.
Thanks to everyone who told me about viewing a video without the Adobe Flash Player.

Tommy,
To remove a single Frame, I would zoom the Timeline to the max. Then, in that Clip, find the Frame that you wish to remove. With the CTI (Current Time Indicator at the last good Frame, hover the Cursor over that spot, until the Scissors Tool pops up (PrE 11 & 12), then click to Cut that Clip. Then, use the right arrow key, to move 1 Frame to the right, and perform the same operation, as above with the Scissors Tool. That will Cut your Clip on either side of that Frame. Rt-click on that Frame, choosing Delete & Close Gap. What version of PrE are you using? ATR, in Reply #2 covered the Scissors Tool, so there should be no difference here - other than placing the CTI on either side of that Frame.
Note: there are considerations to using that method. I assume that you also want to Delete the Video & Audio for that Frame. If they are linked, then the Scissors Tool should Cut both. If they are not linked, you will probably need to do that for both the Video & Audio. Then, if you have Video, or Audio above/below that Frame, you will not be able to automatically Close Gap. Just something to plan for.
Good luck, and hope that helps,
Hunt

Is there a way to edit each frame as an Image in FCP

Hello Folks,
Just wondering how can I edit each frame as an image in FCP pro... let's say my cam shoots @ 24fps and I import that to FCP, well how can I import these 24frames into a photo editing program such as PhotoShop so I edit each frame and color correct and stuff like that? Also how would I bring it back each frame to FCP?
What is this process called? Frame editing? I'm not familiar with this because I was told it is duable, i know in Adobe Premier the frames export to a folder where you can edit each image in watever program you want and bring them back to adobe.
So how can I do this in FCP?
Appreciate your great help,
Joey Dee

just for clarity:
whilst there is indeed a direct Export option, there is no direct Import option. For Export: use FCP's File > Export > Using Quicktime Conversion.. >> Image Sequence option
For Import you can first use Quicktime Player's File > Open Image Sequence... option, and export it out to the codec of the original clip/sequence using the File > Export... option. After that you can then import that clip back into FCP.
its worth noting that this is not "roundtripping", there is no invisible link between the exported frames and the master clip/sequence

.Issue with creating a photo book in Iphoto error message states some frames are missing images, but I've checked each one and from I can see they are all filled in. It won't let my buy the book though

Having an Issue with Creating a photo Book in Iphoto. I continue to get an error message when clicking on "Buy Book" The error indicates that I'm missing a frame or frames from the book. I've checked this many times and cannot locate the issue. The book appears to be complete from my perspective. What can I do now? I worked very hard on this and would hate to lose it all.

How did you check the book? Did you preview it?
See:
iPhoto, Aperture: Previewing an order in iPhoto or Aperture
Is that the message?
"your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can buy this book."
The most common reason for this error is, that you have used a page layout that needs a background photo and you have not yet added the backdrop. Then the book is still showing some default grayscale image.
Check, if one of your page layouts is using this background:
Then you need to add a photo to the background of the page.

Force start frame number in image sequence render

I have a 900 frame comp rendered to a numbered image sequence.
After applying a revision to frames 250-300, I would like to render
only those frames, overwriting the originals.
I have tried:
Under >Render Settings, "Work Area Only", with "Skip existing files" off.
This renders the correct frames as designated by the Work Area Bar,
but the frame numbering begins at 1 instead of 250.
Under >Render Settings, "Custom", with "Skip existing files" off.
In the Custom fields, I specify frames 250-300.
This renders the correct frames as designated by the Custom setting,
but the frame numbering still begins at 1 instead of 250.
Using both of the above settings, I have also tried to "force" a start frame
in the Output Module by manually entering "filename_[00250]".
The result is a new 51 frame sequence starting with "filename_[00250]_00001".
How can I get a partial render to overwrite the correctly
numbered original frames in an image sequence?

I have figured out what I was doing wrong.
I turns out that you can indeed force a start frame
number in the Output Module, but I was using it incorrectly.
Instead of having "Use Comp Frame Number" checked,
I had specified a starting frame number (1 - the first frame of comp).
The result is that regardless of what specified segment I rendered,
the output frames always were numbered starting with frame 1.
After checking "Use Comp Frame Number", problem solved.
Thanks for the input in helping me track down my error.

How to do frame by frame image restoration?

I have a short silent movie (a .mov file) that was created from an old 8mm original film. I can open the file with Premire Pro and can view it frame by frame. I was wondering if it is somehow possible to do a frame-by-frame restoration of this movie (such as eliminating random spots and occasional scratches), preferably with Photoshop (that has many nice image restoration tools) without losing any of the movie's original resolution? I would welcome any ideas on how this might be accomplished? Thanks.

felinedrive wrote:
Thanks so much Jim, Evil, and David -- you each had great suggestions that I think have put me on the right track. Although the approach of editing directly in Photoshop seems like the easiest (and therefore best) solution for me, I will also try the exporting, editing, and importing of the numbered stills approach with Premiere as well.
i've done both methods, and depending on what you need, one could work better....
i had a 7 second sequence that had several 3d rendered objects that intertwined.... i had to get rid of 1 of those objects, and so i exported that sequence as a tiff sequence and just went frame by frame in photoshop doing it. but i was doing every single frame.
another time i had a video that had like what you were talking about some roughness throughout but not constant. that time i followed david's advice and it was very quick and effecient for that particular sequence.... you may prefer his method better for this situation....
never worked with "film" yet, so i dunno if they have it available... but i wonder if there would be any plugins that may help remove like holes and whatnot? i dunno.... i do know that Photoshop CS5's content aware healing will proabbly do WONDERS to fix film holes and stuff.

Grey frame around relinked images

Sometimes (but I think not always) when I relink a placed image I get a double grey frame around the image.
This is not a major problem but just kind of irritating and it seems to go away on its own after a few mouse clicks or something, but is it normal behaviour and can it be avoided?
Here's a shot to show what I'm on about. (In this example the image is masked as indicated by the extra white space at the top.)

I'm on CS3.
I didn't ask for isolation mode, so why am I getting it? (If that is indeed what it is.)
Also the layer palette opens so I can suddenly see all the sub layers. I didn't ask for that either. This only seems to happen randomly when I relink an existing placed image.
I read (again) what it says in the Help file about isolation mode but there doesn't appear to be any locking or dimming of other objects, so maybe that's not what it is. I have never wittingly used isolation mode in several decades of Illie usage; never really saw the point of it although I had read about it and even experimented with it. Instead I use Select Inverse (with a keystroke) and Lock or Hide if I need to isolate a bit of the artwork to work on. It seems a more reliable way of working and no nasty surprises :-)

No audio playback when moving playhead frame by frame

FCP version: 5.0
Machine: Macbook
When I use the keyboard arrows to move the playhead forward frame by frame, I'm not hearing any audio. Even the audio level meter doesn't seem to move
But when I play the timeline normally, the audio is there, and the audio level meter starts moving again.
I normally use this to find the very start of a person's speech, but without the audio, it's quite hard to put a cut in right at the first word that a person says.
What can I do to hear the audio when I move the arrow keys?

Press shift and S keys to turn on "Audio Scrubbing".

How can you get frame by frame control of the image on a movie buttom?

Working on IDVD 7.0.4, I'm trying to position still frames for each of my movie buttons. I read the help pdf and the slider worked an several images, but would not let me move frame by frame to select. When I found the image I wanted and selected it, as soon as I clicked away it reverted to a spot several frames later in the movie. Is there a way to move frame by frame in the still mode?

You may find this useful:
http://www.kenstone.net/fcphomepage/idvd_07stone.html

Cant' move images from frame to frame inside a Grid in InDesign. Please Help

When creating a grid in indesign there is an option to move images from frame to frame, and having them rotate around the frames to see where each image is best to be placed. Example I created a grid with 6 images (2 rows and 3 columns) and now i want image 1 to be where image 6 is. I know there's a way by hitting the arrows and some other keys and have all the images start rotating. I did it once I just can't remember. Please help. How do you move the an image from one frame to another frame without having to go to edit place?
Thanks,
Paola

Swapping images

Need help with inserting frame with scrolling images

Hi,
Im a beginner and need help putting a single box/frame with scrolling images in the middle of my layout, so that when viewed in browser, the header and footer remain in place, while the images and info in the frame in the centre of the page can be scrolled down/up?

You can use an iframe element <iframe src="" width="" height="" scrolling="yes"> though if you're concerned with crawlers you should avoid frames as much as possible.

Moving playhead frame by frame

Everything is in the title. I've done some changes in the keyboard settings and can't find the way to move the playhaed frame by frame with the left and right arrow keys... The arrows are currently locked on moving from an edit to another.
Could you help me with that.
Thanks a lot.

Hello, Thank you for your answer.
The timaline is of course selected, I've restarted and i am not able to type the arrow key in the searching tool of the keyboard shortcuts....
Actually, I would need to find the "Adobe name" for this move... But I can't find it in the shortcuts...
Any other idea?
Thanks in advance.

K/L frame-by-frame moving not working

Hi all. Normally I can move frame by frame through the timeline by holding K while pressing L or J. But now whenever I press L or J when holding K it plays at normal speed, as though I pressed L/J without holding K. Must have changed a setting somewhere but can't figure out where. Anyone know how to fix?

Yes, David, I'm having the same problem under the same circumstances. we're using merged clips made from Prores QTs and multitrk BWF files. In the trim window, the display frame jumps ahead considerably in a frame-by-frame trim, but trims accurately in the timeline. My only work-around has been to use the left/right scrub arrows in the trim window when necessary, which displays the correct frame. Sorry not to have an answer, but I saw a post on another forum from 2007 that speculated it was an FCP 6 bug. Resetting prefs doesn't help.
Tim

Premiere CS4. Video-individual images freeze. abrupt change from frame to frame.

Hi
I'm working with Adobe Premiere CS4... windows XP prof SP3 4GB RAM. ATI Radeon 38XX Graphic
my problem is as following: working window: the projection of individual frames in a movie doesn't run smoothly, the change from frame to frame is abrupt, almost robotic...it also freezes occasionally .. sound is fine though.
I've reinstalled all recent graphic and sound drivers and also latest updates but the problem is still there...
Please advice A:S:A:P
Thanks,
Elena

Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1
Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
- click the embedded picture in Harm's message to enlarge to reading size

Frame By Frame Image Moving

Similar Messages

Maybe you are looking for