Frame Delays Going From Fireworks to Flash

Help!
I am completely new at this and under deadline.
I created a photoshop psd file with tweens, rendered to video, then uploaded as animation in fireworks.
In fireworks I set the frame delays to be what I want. I saved as swf (don't know flash at all) and when I do the frame delays go out the windows. I looked at older forum posts and see that this is what happens but how can I make it happen some other way? I tried setting frame rates in the save as option window to 1 to 30 to whatever and no luck.
My tweens in the png file at 7/100 and my main images I want to appear longer are 350/100.
I think Flash is probably my only answer but I know nothing about. Is there an easier way???
I am a novice at all this! Thanks for whatever help you can provide.

Don't waste your time tinkering with the Fireworks-Flash export; Flash doesn't recognize frame delay the same way Fireworks does. The swf has one single playback speed for the entire project (perhaps the biggest limitation of Flash-based animations), hence the flash exported from Fireworks will lose the frame delay values of Fw, no matter what.
You might have better luck introducing fake frame delays into the swf using the Flash authoring environment. Below are two ways that show you how to do just that:
1. the movieclip approach
2. frame delay actionscript
Good luck!
SiamJai
Innovative Fireworks Tutorials

Similar Messages

Frame Delay Going from Fireworks to Flash

Help,
I am completely new at this and under deadline.
I created a photoshop psd file with tweens, rendered to video, then uploaded as animation in fireworks.
In fireworks I set the frame delays to be what I want. I want to save as swf (don't know flash at all) and when I do the frame delays go out the windows. I looked at older forum posts and see that this is what happens but how can I make it happen some other way? I tried setting frame rates in the save as option window to 1 to 30 to whatever and no luck.
My tweens in the png file at 7/100 and my main images I want to appear longer are 350/100.
I am a novice at all this! Thanks for whatever help you can provide.

Don't waste your time tinkering with the Fireworks-Flash export; Flash doesn't recognize frame delay the same way Fireworks does. The swf has one single playback speed for the entire project (perhaps the biggest limitation of Flash-based animations), hence the flash exported from Fireworks will lose the frame delay values of Fw, no matter what.
You might have better luck introducing fake frame delays into the swf using the Flash authoring environment. Below are two ways that show you how to do just that:
1. the movieclip approach
2. frame delay actionscript
Good luck!
SiamJai
Innovative Fireworks Tutorials

Going from Illustrator into Flash

I tried asking in the Flash forum, though I received no response.
When copying-and-pasting symbols from Illustrator into Flash CS5:
1. Does it make a difference if you paste on the main stage in Flash or create
a new symbol first and paste it there?
2. After pasting on the stage two separate symbols, I get two separate
folders called FlashAICB with a subfolder called Illustrator Symbols
containing my copied symbol. Can I move the two symbols together into
the same folder? Can I change the name of the FlashAICB folder?
Will this cause any problems?
Thanks!

1)If you copy/paste an object from illustrator to flash as is, it will be an object in flash and certain operations require the object to be a symbol which can be done by hitting F8. This is the same thing as creating a symbol in illustrator first.
2)Right clicking on the symbols will let you move the symbols to the root or another folder or even a new folder. Think of the folders as organizers.

Bad looking text going from Motion to Flash

I'm creating a project in Motion which the client wants to play in Flash.
My work flow is 1) Export from Motion (uncompressed+animation codec) 2) Open in Quicktime 3) Export to .FLV using the Flash encoder (highest Quality)
Everything looks fine but I have red text on a white background and it is dithering horribly.
Any suggestions are appreciated--
Thanks

hi,
two things really, flash can look really horrible depending on the data rate you've used to create it. So you could try upping that until things look crisper. Obviously then you get bigger files.
Also red text on a white background is notorious in video for looking crap. Personally I would try any one or all of the following:
change the colour of the font/ and or the background.
change the font, and its size.
change everything.
or and another thing, why export out to to a quicktime from motion. Why not use compressor from motion to create the .flv. I assume you have flash and all the codecs since you are making the .flvs already.
( on a related note - recently I have had a problem where files created from motion via compressor change fonts - however if i drag the motion file into fcp and export via compressor there its all fine - weird)
hth
adam

Frame rate goes from 24fps to 29fps after capture

I have all my footage on 24fps, DVX100A Panasonic Camera, and work on final cut pro 4.5. After my footage is capture some of the clips are on 29fps and others on 24fps... I don't know why is this happening... When I open the clips on Quicktime, even the ones that FCP has listed as the 29fps ones, the info quicktime displays says they are 23.98fps. I exported those files directly from the capture scratch folder and they go 29fps and if i drag them to the timeline they need to be renderize. I closed the program, re-opened it hoping for some magic but nothing... any ideas?? I'm on a deadline...

did you shoot 24p or 24pA. if you shot 24p you need to capture using the cinema tools preset for reverse telecine. if you shot 24pA, use the setting for advanced pulldown removal.
as well, make very sure that you edit in a 23.98 timeline, not a 24 timeline. You will absolutely lose sync if you edit 24p material in a 24 timeline.
Keep in mind that whether you shoot 24p or 24pA, you are still capturing images into the camera at 29.97fps. The 2:3:3:2 pulldown and the 3:2 (2:3:2:3) pulldown methods are a way of duplicating fields to make up for the 6 frame difference.
i.e. do the count.
Frame 1 has two fields. Frame 2 has 3 fields, one field will be discarded upon pulldown removal. if you are shooting 24pA then frame 3 will also have 3 fields and then frame 4 will have 2 fields. If shooting 24p, then frame 3 will have 2 fields and frame 4 will have 3 fields. If you do the math you'll see that, for your intended 24 frames you have 12 extra fields. That is 6 frames (2 fields per frame...) The pulldown removal removes these frames upon capture. Leaving you with 23.98 frames to edit with. Make sure you use a 23.98 timeline. The setting you changed in your preferences was for playback, since FCP assumes you are playing back to an NTSC CRT monitor (capable of playing 29.97 fps ONLY) FCP will add a pulldown for the output. THis does not affect your project. It is done on the fly by FCP.
Hope this helps.
Matt

Going from Fireworks to Dreamweaver.....

I have taken a couple of courses on Lynda.com (Fireworks Essential Training and Fireworks Rapid Prototyping). I am confused when I export a website, and open it in Dreamweaver. I have a fairly good grasp of Dreamweaver, yet I am perplexed when I see what Fireworks creates after an export. The entire site is made up of numerous images that line up in a table. All the text is flattened into these images. Since there is no text, I imagine the website is basically unsearchable AND you cannot make a simple change to the text without exporting every graphic and .html page again. It seems that Fireworks wants you to abandon the whole concept of CSS altogether. I have designed many sites using table layouts (Dreamweaver) and graphics(Photoshop). I was hoping that Fireworks would make it a whole lot easier. I get the impression that Fireworks is ONLY for a rough layout, but shouldn't be used for creating a web site. If this is so, why bother? Am I missing something?
Any suggestions would be grately appreciated.
Thank you.

HTML and Images export should only be used for creating an interactive, high fidelity prototype, NOT a final web site. Your options in CS4 and CS5 are to export as CSS and Images. It's by no means a perfect solution, but it will get you closer to a true, html and css-based page design.
Fireworks is NOT for creating a web site. It was never designed to do that. That's Dreamweaver's job. FW was created to prototype, visualize and design that site quickly and optimize the image objects appropriately for use in the final web or mobile project.
Recent additions to Fireworks CS5 such as the CSS3 Mobile Pack (available on Adobe Labs for free) help the designer to generate CSS based mark up of common CSS3 effects such as rounded rectangles, gradient fills, drop shadows, glows, text styles as well as giving you the ability to reskin jQuery mobile templates.
HTH

IPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds recorded. This happens randomly and often and sometimes has the delay but starts at zero. Solution Anyone?

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

Frame delay issues

I have created an animated gif in Fireworks 8 with a frame
delay of 5 seconds (each frame). The animation works fine in
Fireworks, but when I save the file and use it in DW 8 as a swap
image the frame rate seems to return to default of 0.07s. Is the
issue in DW or FW? How do I fix???

Well for the most part. I just went through 20 clips (not my own), and actually there are times that Premier, Quicktime and FC have different frame rates for the same clip. I found that in 3 of the 20 clips. The other 17 were exactly the same in PR and QT. Only 1 time did all three have the same FPS, and that was with video footage (additional clip I just imported) that I shot. So, I'm not sure what to make of it. I am going to move away from this now because it's really a non-issue as far as the video quality. As I mentioned my concern is that if FC has an issue with Frame Rates, then maybe there may be something inherently wrong with my version. And honestly, I'm not convinced of that either so I just took a proactive approach and set up a one on one at the Apple Store next week. I will take my clips and play them in FC 10.1 on one of their computers in the Boulder store. If they do the same thing, then I'll know that my version is fine. I think that is the best solution so I don't bother you all anymore with this.
Thank you Tom and the others who worked with me on the frame rate issue. I'll move on now.
Have a great weekend!
All the best,
Greg

Converting from photoshop to Flash

I do cartoons with photoshop but i want to add sound to them
but for this I need flash but i cant convert those files to
flash

tboparis,
you can export from P'shop in a number of formats that flash
can import - but retaining layers is
not supported - maybe now that Adobe aquired Macromedia that
will change (hint hint if Adobe reads
this).
There is a plugin called PSD2FLA:
http://www.medialab.com/psd2fla/
I have it and it wors great. A little pricey for some but it
has saved me hours and probably days of
work - so it was worth it for me.
otherwise you can, if you have Fireworks, open the PSD in it
and then save as and open that file in
Flash - i cant remember exactly how but i was able to retain
layers going through Fireworks once -
but transparency was hit or miss (mostly miss).
Other people have reported importing PSD files via quicktime
- but i have never had any success with
this.
Google may be your friend here.
hope this helps
--> Adobe Certified Expert *ACE*
--> www.mudbubble.com
--> www.keyframer.com
tboparis wrote:
> I do cartoons with photoshop but i want to add sound to
them but for this I need flash but i cant convert those files to
flash

What frame rate should you build your Flash file at?

Every second of video has 30 frames. But Flash animations can
be done at any frame rate, which raises a couple of important
questions:what frame rate should you work at, and second, if you
choose to work at a rate other than 30 frames per second (fps), how
do you convert to 30 fps? I deal with the question of frame rate
conversion below.
You can create a Flash movie at 30 fps. But if is going to be
played back on a computer, a 30 fps .swf file will generally
produce unacceptably high data rates, unless the image is very
small and simple, or the computer it is playing on is very fast. It
can also create a lot of extra animation work if you want to draw
in-betweens for all 30 frames. Fortunately, there is no need to
build your Flash movie at 30 fps, even if you are planning to
transfer it to video.
I usually build animation that needs to work on the web or
video at 12 fps. This gives us a good balance of lower data rates
and smoother animation. When creating cartoon style animation, it
also keeps our work consistent with the majority of broadcast
animation. While some high end cel animation is done at 24 frames
per second (the rate that film is projected at), much broadcast
animation is created at 12 fps. This is because it is drawn on
"2's." In other words, each image holds for 2 frames. Do the math
and it becomes clear why--half the amount of frames to draw each
second. While Disney and Dreamworks may have virtually unlimited
budgets to create their epic animations, most broadcast (and even
more so, Internet) productions are on very tight budgets. But even
the big studios do a lot of character animation on 2's. It looks
good that way, so why create twice the work?
If we are using flash to build a cartoon solely aimed at
broadcast or film, however, we build it at 24 fps. That way we can
animate on 2's for most of the character animation, but do animate
on 1's for segments or particular motions that require smoother
animation.
If we are using Flash to build graphics for broadcast use
only, and so won't be hand drawing in betweens, we usually build
the file at 30 fps. This will give us the smoothest motion, and
data rate won't be an issue for you. It is also possible to even
build it at 60 fps, and convert this to a 30 fps video with fields
In the end, you can decide to build it at any rate you want.
The lower the rate, the smaller the file size, data rate and number
of frames to animate, but the less smooth the animation.
Conversely, the higher the frame rate, the higher the file size,
data rate and number of frames to animate, but with smoother
animation.
now I use
FLASH VIDEO MX PRO
to covnert Video in multiple formats to FLV or SWF, I set the frame
size just as above, I always get soomth Flash
at the meantime, I have to set video rate when I use
FLV To Video Convert
Pro to play the video in my iPod, if you set the wrong frame
rate, your iPod and other devices may not support the frame rate

Usually video quality has nothing with frame rate, but when
you convert flash to iPhone or other devices, you should think of
which frame rate video can your device play. when I convert .swf to
iPhone with
SWF to Video
Converter, as you know, iPhone can only support frame rate from
2 to 15 or a little more, I always choose 15. In this scare, frame
rate is higher, the quality is better.

Unable to boot from my USB Flash Memory Device

Hi there,
I recently purchased a macbook pro with the lion 10.7.2 firmware.
I am experiencing problems with my USB Flash memory as when i plug it in it comes up fine on the desktop and i can browse it. The problem is that when i open up an application such as Adobe Fireworks or Netbeans (Java programming) and try and access files from my USB flash drive, my drive does not appear on the list/menu, it only comes up with my macbook pro documents etc.
I have asked friends with Mac's and they tell me they do not experience this problem. Please can you help me whether it is a problem with my settings or any other issues.
Thank you.

Nope, I dont recieve any massages at all. It just doesnt appear.
Also usually you can drag a file into an application, for example drag an image into photoshop in order to open that image up but this does not work either.

I am trying to create a simple animated gif in Photoshop. I've set up my frames and want to use the tween to make the transitions less jerky. When I tween between frame 1 and frame 2 the object in frame two goes out of position, appearing in a different p

I am trying to create a simple animated gif in Photoshop. I've set up my frames and want to use the tween to make the transitions less jerky. When I tween between frame 1 and frame 2 the object in frame two goes out of position, appearing in a different place than where it is on frame 2. Confused!

Hi Melissa - thanks for your interest. Here's the first frame, the second frame and the tween frame. I don't understand why the tween is changing the position of the object in frame 2, was expecting it to just fade from one frame to the next.

Songs that are imported manually from cds or flash drives are randomly deleting from my iphone 5. Sometimes I get an error -54 message first. Sometimes not. What could be causing this and how can I fix it?

I have an iPhone 5 16g ios 8.2 and it keeps randomly deleting the songs I manually put on from cds or flash drives. The songs I purchased from iTunes don't delete just the ones I manually add. It has happened three times, once after I added 399 songs, once after I added 27 songs and once when I added 45 songs. Sometimes an error (-54) pops up but not always, it's just in an instant all the songs I put on are suddenly gone. I have uninstalled and reinstalled iTunes three times, reset all the settings on my phone and also restored my phone to factory settings. Nothing has worked. I have a 4th generation iPod and I have never had this problem. Any and all suggestions/help would be greatly appreciated. Thank you.

x0SiN0x:
Welcome to Apple Discussions..
My first suggestion is to Repair Disk. Here's how:
Insert Installer disk and Restart, holding down the "C" key.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
Please post back and let me know how that goes.
Here are a few links that may help you to identify the issues:
Resolving Disk, Permission, and Cache Corruption
Tuning Mac OS X Performance
Mac OS X System Maintenance
Please don't hesitate to post back should you have further questions or comments, or with update.
Good luck.
cornelius

Remove / unload external swf file(s) from the main flash file and load a new swf file and garbage collection from memory.

I can't seem to remove / unload the external swf files e.g when the carousel.swf (portfolio) is displayed and I press the about button the about content is overlapping the carousel (portfolio) . How can I remove / unload an external swf file from the main flash file and load a new swf file, while at the same time removing garbage collection from memory?
This is the error message(s) I am receiving: "TypeError: Error #2007: Parameter child must be non-null.
at flash.display::DisplayObjectContainer/removeChild()
at index_fla::MainTimeline/Down3()"
import nl.demonsters.debugger.MonsterDebugger;
var d:MonsterDebugger=new MonsterDebugger(this);
stage.scaleMode=StageScaleMode.NO_SCALE;
stage.align=StageAlign.TOP_LEFT;
stage.addEventListener(Event.RESIZE, resizeHandler);
// loader is the loader for portfolio page swf
var loader:Loader;
var loader2:Loader;
var loader3:Loader;
var loader1:Loader;
// resize content
function resizeHandler(event:Event):void {
    // resizes portfolio page to center
loader.x = (stage.stageWidth - loader.width) * .5;
loader.y = (stage.stageHeight - loader.height) * .5;
// resizes about page to center
loader3.x = (stage.stageWidth - 482) * .5 - 260;
loader3.y = (stage.stageHeight - 492) * .5 - 140;
/*loader2.x = (stage.stageWidth - 658.65) * .5;
loader2.y = (stage.stageHeight - 551.45) * .5;*/
addEventListener(Event.ENTER_FRAME, onEnterFrame,false, 0, true);
function onEnterFrame(ev:Event):void {
var requesterb:URLRequest=new URLRequest("carouselLoader.swf");
loader = null;
loader = new Loader();
loader.name ="carousel1"
//adds gallery.swf to stage at begining of movie
loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader.load(requesterb);
} catch (error:SecurityError) {
trace(error);
addChild(loader);
loader.x = (stage.stageWidth - 739) * .5;
loader.y = (stage.stageHeight - 500) * .5;
// stop gallery.swf from duplication over and over again on enter frame
removeEventListener(Event.ENTER_FRAME, onEnterFrame);
//PORTFOLIO BUTTON
//adds eventlistner so that gallery.swf can be loaded
MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
function Down(event:MouseEvent):void {
// re adds listener for contact.swf and about.swf
MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
//unloads gallery.swf from enter frame if users presses portfolio button in nav
var requester:URLRequest=new URLRequest("carouselLoader.swf");
    loader = null;
loader = new Loader();
loader.name ="carousel"
loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader.load(requester);
} catch (error:SecurityError) {
trace(error);
addChild(loader);
loader.x = (stage.stageWidth - 739) * .5;
loader.y = (stage.stageHeight - 500) * .5;
removeChild( getChildByName("about") );
removeChild( getChildByName("carousel1") );
// remove eventlistner and prevents duplication of gallery.swf
MovieClip(root).nav.portfolio.removeEventListener(MouseEvent.MOUSE_DOWN, Down);
//INFORMATION BUTTON
//adds eventlistner so that info.swf can be loaded
MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
function Down1(event:MouseEvent):void {
//this re-adds the EventListener for portfolio so that end user can view again if they wish.
MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
var requester:URLRequest=new URLRequest("contactLoader.swf");
loader2 = null;
loader2 = new Loader();
loader2.name ="contact"
loader2.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader2.load(requester);
} catch (error:SecurityError) {
trace(error);
addChild(loader2);
loader2.x = (stage.stageWidth - 658.65) * .5;
loader2.y = (stage.stageHeight - 551.45) * .5;
// remove eventlistner and prevents duplication of info.swf
MovieClip(root).nav.info.removeEventListener(MouseEvent.MOUSE_DOWN, Down1);
//ABOUT BUTTON
//adds eventlistner so that info.swf can be loaded
MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
function Down3(event:MouseEvent):void {
//this re-adds the EventListener for portfolio so that end user can view again if they wish.
MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
var requester:URLRequest=new URLRequest("aboutLoader.swf");
loader3 = null;
loader3 = new Loader();
loader3.name ="about"
loader3.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader3.load(requester);
} catch (error:SecurityError) {
trace(error);
addChild(loader3);
loader3.x = (stage.stageWidth - 482) * .5 - 260;
loader3.y = (stage.stageHeight - 492) * .5 - 140;
removeChild( getChildByName("carousel") );
removeChild( getChildByName("carousel1") );
// remove eventlistner and prevents duplication of info.swf
MovieClip(root).nav.about.removeEventListener(MouseEvent.MOUSE_DOWN, Down3);
stop();

Andrei1,
Thank you for the helpful advice. I made the changes as you suggested but I am receiving a #1009 error message even though my site is working the way I wan it to work. I would still like to fix the errors so that my site runs and error free. This is the error I am receiving:
"TypeError: Error #1009: Cannot access a property or method of a null object reference."
I'm sure this is not the best method to unload loaders and I am guessing this is why I am receiving the following error message.
     loader.unload();
     loader2.unload();
     loader3.unload();
I also tried creating a function to unload the loader but received the same error message and my portfolio swf was not showing at all.
     function killLoad():void{
     try { loader.close(); loader2.close; loader3.close;} catch (e:*) {}
     loader.unload(); loader2.unload(); loader3.unload();
I have a question regarding suggestion you made to set Mouse Event to "null". What does this do setting the MouseEvent do exactly? Also, since I've set the MouseEvent to null do I also have to set the loader to null? e.g.
---- Here is my updated code ----
// variable for external loaders
var loader:Loader;
var loader1:Loader;
var loader2:Loader;
var loader3:Loader;
// makes borders resize with browser size
function resizeHandler(event:Event):void {
// resizes portfolio page to center
     loader.x = (stage.stageWidth - loader.width) * .5;
     loader.y = (stage.stageHeight - loader.height) * .5;
// resizes about page to center
     loader3.x = (stage.stageWidth - 482) * .5 - 260;
     loader3.y = (stage.stageHeight - 492) * .5 - 140;
//adds gallery.swf to stage at begining of moviie
     Down();
//PORTFOLIO BUTTON
//adds eventlistner so that gallery.swf can be loaded
     MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
function Down(event:MouseEvent = null):void {
// re adds listener for contact.swf and about.swf
     MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
     MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
//unloads gallery.swf from enter frame if users presses portfolio button in nav
     var requester:URLRequest=new URLRequest("carouselLoader.swf");
     loader = new Loader();
     loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
     function ioError(event:IOErrorEvent):void {
     trace(event);
     try {
     loader.load(requester);
     } catch (error:SecurityError) {
     trace(error);
     this.addChild(loader);
     loader.x = (stage.stageWidth - 739) * .5;
     loader.y = (stage.stageHeight - 500) * .5;
// sure this is not the best way to do this - but it is unload external swfs
     loader.unload();
     loader2.unload();
     loader3.unload();
// remove eventlistner and prevents duplication of gallery.swf
     MovieClip(root).nav.portfolio.removeEventListener(MouseEvent.MOUSE_DOWN, Down);
//INFORMATION BUTTON
     //adds eventlistner so that info.swf can be loaded
     MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
     function Down1(event:MouseEvent = null):void {
     //this re-adds the EventListener for portfolio so that end user can view again if they wish.
     MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
     MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
     var requester:URLRequest=new URLRequest("contactLoader.swf");
     loader2 = null;
     loader2 = new Loader();
     loader2.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
     function ioError(event:IOErrorEvent):void {
     trace(event);
     try {
     loader2.load(requester);
}      catch (error:SecurityError) {
     trace(error);
     addChild(loader2);
     loader2.x = (stage.stageWidth - 658.65) * .5;
     loader2.y = (stage.stageHeight - 551.45) * .5;
loader.unload();
loader2.unload();
loader3.unload();
     // remove eventlistner and prevents duplication of info.swf
     MovieClip(root).nav.info.removeEventListener(MouseEvent.MOUSE_DOWN, Down1);
//ABOUT BUTTON
     //adds eventlistner so that info.swf can be loaded
     MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
     function Down3(event:MouseEvent = null):void {
     //this re-adds the EventListener for portfolio so that end user can view again if they wish.
     MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
     MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
     var requester:URLRequest=new URLRequest("aboutLoader.swf");
     loader3 = null;
     loader3 = new Loader();
     loader3.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
     function ioError(event:IOErrorEvent):void {
     trace(event);
     try {
     loader3.load(requester);
}      catch (error:SecurityError) {
     trace(error);
     addChild(loader3);
     loader3.x = (stage.stageWidth - 482) * .5 - 260;
     loader3.y = (stage.stageHeight - 492) * .5 - 140;
     loader.unload();
     loader2.unload();
     loader3.unload();
     // remove eventlistner and prevents duplication of info.swf
     MovieClip(root).nav.about.removeEventListener(MouseEvent.MOUSE_DOWN, Down3);
     stop();

I have Photoshop Elements 6 and am dealing with the GIF frame delay bug. Must I upgrade?

I am dealing with the Photoshop Elements 6 GIF animation frame delay bug. I understand there has not been a fix for some time so I want to know if one has been developed. If not what do I have to do to address this. Can I get an upgrade? What steps do I have to take and who do I deal with at Adobe for this?

The gif delay problem persisted for many versions of PSE. You can buy PSE 12, but it's silly to buy it from adobe since their upgrade price is more than the street price for the full version at big box stores and online resellers.
If your question is will adobe give you a free upgrade because of this bug, then the answer is no.

Frame Delays Going From Fireworks to Flash

Similar Messages

Maybe you are looking for