FRAME "GLITCH" AFTER MOTION EXPORT

HELP!
I'm having a problem with some sort of frame "glitch" when I export my Motion project to Quicktime.
Everything will be playing back fine & then there will be one frame that looks all whacked out.
Just for that split second.
It's in different places every time I re-export.
You can view the bad frame here: http://www.photropics.com/bad.jpg
& the good frame(right after it) here: http://www.photropics.com/good.jpg
This project has a lot of movement going on including a particle emitter i the first 20 seconds but that's not where the glitch is.
You'll see that in this particular export, the glitch is actually in a clone layer that I'm using as a reflection of a video.
This is inconsistent though, it can be in different places in the scene in every export.
Export settings are on RENDER BEST / ANIMATION / FULL RESOLUTION / 720 X 480
Same as my setup.
Very frustrated!
I'm starting to question my machine.
I'm working with a PPC G5 Dual 2 Hhz. machine with 3 gigs of RAM.
It's got the original graphics card in it, which is always a problem for me but will that affect the export quality?
I know it's not an Intel machine but it should be able to handle a 1.5 minute clip from Motion. Shouldn't it?
I'll have a new Intel machine in a few months but need some help with making this work if possible.
Thanks in advance.
Any help is appreciated.
JRM

Thanks for the response Adam.
I didn't mean to be so vague about the details originally.
I am exporting out of motion as a Quicktime movie to eventually be brought into DVD Studio Pro & burned onto DVD.
I tried bringing the file directly into DVDSP as a Motion project & it took 18 hours to do a build but
as a QT Movie, it only takes minutes.
If I change the animation codec, will I lose quality? I want it to be as clean as possible.
I have cleared the RAM cache & with the same result.
I might try the FCP import idea but I haven't used Compressor before. The last time worked with video & I used FCP was when it was in version 2 so I'm somewhat new. I've crashed coursed in FCP 6, LiveType, Motion & DVDSP so I just haven't gotten to Compressor yet.
Tell me though, did you look at the samples I uploaded?
Is this just a weird dropped frame or what do you think?
I also tried exporting at Half size & the glitch is still there & in the same place.
I thought it might be something within my motion project in conflict but there's nothing in the particular spot that is starting or stopping or anything.
Anyway, thanks again.
JRM

Similar Messages

After Motion Export - Performance is terrible and slow

Everything works great with my entire FCS but once I export anything complicated from Motion with nothing open or a bunch of applications open my imac slows down tremendously. nothing but the color wheel and I cant even expose' without a 1-2 second pause on all switching of applications, saving anything... This lasts till I restart.
iMac 2.4 Core 2 Duo 4GB ram 640HD.
Final Cut Studio (3) up to date.
Anyone else having this issue? Thanks!

A couple thoughts:
1: Are you saying that AFTER (like the title suggests) the export that your system is still unresponsive?
2: Does the same thing happen if you export through compressor?
3: Try and clear your RAM in the "Mark>RAM Preview" menu
It sounds like your iMac is choking without memory. Not sure how much you have but there's never enough for Motion.

Why does my video stutter/glitch after I export it?

I have about a 1.5 hour video of a friend's wedding I recorded, I edited it in Adobe Premiere Pro CS5 (with some After Effects). I plan to burn the video to a DVD using iDVD. When I render the workarea to preview the video everything's fine, but when I do the final export the video stutters/glitches in some spots (some a lot worse than others). I tried multiple encoding options but I still haven't gotten it to stop.
Any suggestions? Is there an ideal exporting option I should be doing?
I'm not all that knowledgable with Premiere Pro so I could have easily done something wrong with either the sequence or export set up (so many options). Here are my sequence settings:
HDV 720p
1280x720
24fps
square pixels
My files in the video are multiple formats - .MOV, MP4 & AVI

I’m using apple intermediate codec 1920x 1080i60format. Here is a small clip ofwhat it looks like
http://www.youtube.com/watch?v=cuQ5VduBUKk
Thanks

Help Needed : Video Glitch after exporting from Premiere Pro CC

Hi all ,
            I have been experiencing this issue for sometime now. I occasionally encounter a video glitch after exporting a video from Premiere Pro CS6 or CC. Sometimes it happens in my NLE timeline , which I have to remove the affected clip that has the glitch/flicker problem from my bin and re-import the clip from my original source, which solves the problem.
             However , the worst part is when the glitch/flicker happens when I have already exported the video when everything seems fine in the timeline of Premiere . My sequence settings do match with the clip . This issue happens intermittently as I always have to hope for the best when the video exports.
Here is an Example of what I mean, the glitch/flicker happens at 3:28 of the music video.
             Hopefully those who have the same issue can share how to troubleshoot this problem . Thank you.
Regards,
Elias Lo

what i did was install final cut pro. I dont have an answer for this but it finish my problem , how i came up with this idea well i have the new mac pro cilinder that looks like a trash can 64gb memory and all the toys to work fast but again the mov files cannot be seen in the desktop cause premiere and mac and windows and all this ******** they fight about , and i also have your problem big time o pn every export.
i have instal final cut onmy older slower imac and i can see everything and the export are perfect
so i just did that and its perfectly fine basicaly final cut does something that makes ur computer and adobe read all kinds of files frames format.   i try to explain this to this adobe premiere enginners but they just say uuuuhhhhh

Has anyone solved or worked around the After Effects CC red flash frame glitch?

I can't find any mention on any forums of the After Effects CC red flash frame glitch later than Feb. 2014. I just installed 12.2 (which was my first CC version) on my macpro and started getting the red flash frames randomly, but with increasing frequency, in my projects. I have never had this problem before on any previous computer or version for AE. The forums I've read have referenced ProRes source footage, outputs to ProRes, and lens blur. My project uses all of these things.
If there is a universally accepted solution/work around, I haven't seen it definitively. Do I not use ProRes source footage? Do I not render to ProRes 4444? Do I not use the lens blur effect? Do I give up and go back to CS6?

Hi Keith,
I have the "same" issue with the red frames in AFX CC
I have seen them first, as I resized a prores4444 HD to a smaller format and saw the redframes in the preview window.
Setup in AFX: I created a comp from the HD Prores4444 footage and put this comp in a comp with resolution of 960x540.
The output format was again prores4444.
I shuttled through the clips in the small comp and I saw the red frames too.
When I switched to the HD comp at the same position everything was fine.
I "solved" the problem by flushing the cache, twice. Because after the first purge I was only able to render the first clip. The second one had the red frame problematic again.
Maybe It has something to do with hardware accelerated layers.
I'm using a MacPro running OSX 10.8.5 with a Nvidia GTX680.
Cheers
Michael

After Effects exports picture as a black frame?

I just graded a simple picture in AE and after I exported the picture I went to look at the image file and all It was was a black frame. I'ved tried different formats, and I've tried exporting it as a .psd for photoshop but it still won't work. Can somebody help me with this?

You have not provided proper information on your file and settings nor your system. Based on your tags we can assume that you are using MB Colorista and then you may simply exhaust its limits or there is a general issue with your graphics hardwre, since the effect uses GPU acceleration.
Mylenium

Global Switches for Frame Blend and Motion Blur aren't working with the newest version of After Effects 2014.1.1

I have been using After Effects regularly since 1995. So this isn't an operator error.
I am on a new Mac Pro six core with OSX 10.9.5 and 32 gigs of RAM.
Is anyone else having trouble with activating frame blend and motion blur?
Occasionally I am able to get the global switch to appear to be on. It still won't activate motion blur or frame blend.

I'll answer my own issue. The global switches actually work. The distinct dark boxes that indicate when the global switches are enabled have been removed and replaced by a light blue outline of the switch icon.

Motion 5 glitching screen when exporting

I was exporting a color corrected shot from motion, when the screen went bezerk. The progress bar said the export was about halfway done, when it suddenly glitched the whole screen into this glitchy, pixely purple wavy thing! Heres a picture to tell you where I'm coming from:
Part of the progress bar was still visible, and I managed to click different parts of the screen, which opened different menues, where I finally managed to force quit motion. But I tried a few more times, along with restarting the computer, but it always seems to glitch when I export. plus, if I let the export finish, the finished export is all glitchy too!!!! HELP!!!!!!!!! I have a late 2006 imac, with isight, and 2.5 gb of RAM, and a outdated memorycard??

I think that may be your problem. According to this, that doesn't look to be a supported graphics card: http://support.apple.com/kb/ht4664.

Lagging pixels on video while editing and after render-export. -How do I fix this? the original media is Crystal clear.

Hello guys,
I am trying to edit some gameplay footage I captured using "AverMedia Game Capture HD", but whenever I import the media (at 1080i),
There are pixels that hang on the video player, mostly when the camera is turning left to right,
and on occasion, some random color blurs that bloom out of nowhere.
I attached a image so you can see what it looks like:
Here is what the video looks like after it is rendered and exported.
Along with the visual pixels, it also displays horizontal lines. (possibly due to my export settings, I was in a hurry just to test it)
Both the capture device and final cut pro x are upgraded to the latest firmware/updates.
I am using HD AC Component cables (blue green red) both for in and out connections between ps3 - cap device - tv.
The capture device automatically records files to mpeg-4.
The resolution of the tv, and recorded footage is in 1080i (1920 × 1080) and the quality looks great when I play it through quick time or any other media players:
Any tips or info? I have been using Final Cut pro x since it was released. I am not a professional but I have used it for some very important jobs thorugout the year, but I am really stumped with this.
Overview:
-Media info
File Type: mpeg-4
Codec: H.264, AAC
Dimensions: 1080i (1920 × 1080)
Thankyou for the help!

Alright, lets get the good news out first:
Converting the file definitely fixed the pixel issues.
However, there where frequent "blips" of some frames that disturbed the video.
Also, the converter created a 5GB file that was originally around 300MB!!
It put a serious load on importing, rendering and transcode analysis, however the video played back smoothly, it would be perfect despite the large file size and frequent frame glitches.
This is all due to my lack of knowledge in video property conversion.
At this point, I feel that I am asking for too much, but I am really stumped...
I can try so many possibilities, but this would save me allot of time if I could get the help:
What converter settings should choose to have the optimal video file that,
plays back smoothly,
plays In HD,
is compatible with fcp,
and can still stay moderately low on file size?
Here is the current info on the RAW video file:
Here are the previous settings I used to convert:
(slight improvemnt, but extremely high file size, and still has some frame glitches)
What should I have (not?) done with these options?
(I admit I chose these settings and had no Idea what the heck I was doing)
Again, thank you for your help, I really appreciate it.
EDIT:
For reference, This is the new glitch issue I see:
Here is the normal frame,
Here is the next frame when a glitch apears.
It seems to be replying a previous frame in the video.
Also, the horozontal lines do not show during live playback, only when the play head is paused, or when scrubbing.

Jerky and abrupt frame movement after rendering (Clip)

Hello,
Would anybody happen to know what's the reason of jerky and abrupt frame movement after rendering?
Please go to the link http://www.youtube.com/watch?v=ANTpUzk3jYY and watch the clip.
- I have a 4Core CPU (Intel i7)
- Graphic Card: Quadro FX 4800 (with the latest 64-bit drivers installed)
- The most recent version of Elemental Accelerator (with the latest drivers installed)
- Adobe After Effects CS4, Adobe Premiere PRO CS4.2
- Adobe Photoshop CS4 Extended
- Windows 7 64-bit
- RAM memory: 12GB
Do you know why does this happen?
Thank you!!
Giannis

I use a Full HD 1080i SONY Semi professional cam (2,930.00 $). I use AVCHD file format which is accepted by premiere and after effects. I could convert it but I would not like to spend time since this kind of format is accepted by the software.
I don't have these problems all the time. Eventually I managed to export the clip properly. I think it has to do with temporal memory. I don't know. I have to check all the memory data for best peformance and best rendering. I think I have already done this but I will dig a little deeper in this..

Freeze frame glitch- text tracking?

OK, I have made some custom title generators in Motion, but sometimes I need to extend them (without extending the animation speed on the front end) so I add a freeze frame. After upgrading to 10.1.1, I've noticed that sometimes- not every time- the freeze frame renders the text with squished tracking. The generator renders and displays fine, but once it hits the freeze frame, it's squished.
Any ideas/thoughts?

You are correct. You would turn OFF Roll, so that you have a still Title. Then in Effects Control Panel, you would Keyframe the fixed Effect>Motion>Position over time. Let's say that you wish the Title to "roll" from offscreen below. Set the initial Keyframe to that Position, and then decide when you want the Title to pause. Set another Keyframe to that that point on the mini-Timeline, and alter the Position to that desired. Decide how long you want it to "hold," and then set another Keyframe there, leaving the Position alone. Then, go to the end of the Title and set one last Keyframe on that last Frame. Alter the Position to be off-screen at the top. Done.
You can "smooth out" the motion, by adding Bezier controls to each Keyframe. Choices like Ease-Out, and Ease-In will probably work fine. Rt-click the first Keyframe and choose Ease-Out. Go to the next Keyframe (the initial part of the "hold") and Rt-click, choosing Ease-In. Go to the next Keyframe (the end of your "hold"), Rt-click and choose Ease-Out. You probably do not need the Ease-In for that last Keyframe, but if you find that that last "move" is not smooth enough for you, just Rt-click and choose Ease-In.
The little "arrows" in the Keyframe Header will allow you to easily step forward and backward, from Keyframe to Keyframe.
Good luck,
Hunt
PS - before you do the Keyframes, set the Duration for the whole Title first, or you will probably need to move your Keyframes about.

Field separated after Flash export ?

hello everybody, i have a PAL DVD project, all the materials are output from CG, so they are Frame Base(progressive), but after i exported to Flash, all the video content became jaggy, looks like they have only one of the field information(field separated), why? and how can i make a progressive Flash export? THANKS
ryandrew

Me too. I originally started this thread because I didn't see yours.
Will Flash export (Dropped fields) be fixed in next version of CS4?
Any fix other than exporting out of AE or something like that?
Thanks!

Red frames on the movie exported

Hi, I exported a project to MPEG2 blu-ray (source XMF files, camera Canon XF100), and I have several red frames within the movie. It's almost unusable. I have tried to do media cache cleaning, re-rendered the effects, but still without success. I work on Macbook Pro with OSx Yosemite. Premiere is 2014.2 v8.1 Caravan build 8.2.0.
Could someone have experienced this issue?
Does Adobe have a fix?
In the meanwhile, I prefer downgrade to CS6, that is rock solid. The problem is the waste of time to start from zero, because the project isn't down-compatible. This is a crazy way by Adobe to handle a downgrade!
Bye

Hi, I still have the issue. I'm using Premiere Pro 2014.2 v8.1 Caravan 8.2.0 (65) build, on Macbook Pro, half 2012, Yosemite 10.10.2. Several red frames in the output exported (MPEG2-bluray) from MXF source (Canon XF100). After several export try, the red frames still remain, but they are located in different positions. I confirm that the same clip exported using Premiere CS6 (and also using Premiere CC 2014.0 v8.0) are OK, without red frames!!! The big issue for me is that the project cannot be opened by previous Premiere releases, and I lost weeks of work!!!
Adobe, any news? I'm available to give you all the information you ask to test the case.

White Screen in ITUNES after Quicktime Export. Samsung CL65

I have a Samsung CL65 digital camera. When I shoot movies I transfer them from my camera to IPHOTO, along with my pictures.
When I open the movie in IPHOTO it opens in QUICKTIME and there is an option to EXPORT TO ITUNES. No matter what quality I select (Iphone - Appletv) the result after the export in ITUNES is always a movie WITH SOUND but with a WHITE SCREEN for video.
I have 3 digital cameras, samsung, panasonic and canon. I only have this problem with Samsung. The video file that the Samsung camera makes are mp4.
I want to be able to export from Quicktime to Itunes without getting a white screen movie with sound. Any ideas????

I want to be able to export from Quicktime to Itunes without getting a white screen movie with sound. Any ideas?
The Samsung video codec does not appear to be "conversion compatible" with any application employing the QT embedded structure. It took me over an hour to find what I assume to be a true, non-YouTube converted "CL65/ST1000" sample file for testing purposes (i.e., it would have been a lot quicker if you had uploaded a sample file for testing) before actually running a series of tests under both Leopard and Snow Leopard. Basically, it seems you can use an alternative application which contains its own codec and does not need to "prepare" the file content before initiating the conversion. I found that the free HandBrake application which defaults to the X.264 codec worked for me. As I consider not changing the frame rate rate to be more important then retaining full 720p dimensions, I only ran tests using a 960x540 @ 30 fps setting for TV device.

Hard drive glitches after battery replacement... normal?

Hello, I have a 4Gen 20gig ipod with click wheel and I just replaced the battery myself last night.
I then plugged it into my computer to sync and it was recognized by windows, but not by iTunes, the hard drive would whir, then click and then try again, then stop. I figured it was just that the battery wasn't charged enough yet, so I let it charge overnight.
In the morning it synced fine. I was then playing it in the car, and some songs would appear, then the hard drive would whir, click a couple of times, then skip on to the next one. After a couple songs it started playing them normal. After skipping a few and the hard drive spun to load more music into the temporary memory, it would whir, click and then skip the song, then whir click and skip that one too... and it kept doing it. Then I reset it, and it kept showing the apple symbol, then the Exclamation and folder icon, then tried restarting again. After trying to reset itself 4 or 5 times, it finally succeeded.
I read a few threads on here, gave the ipod a gentle nudge on the right hand corner a few times, and now its playing and I haven't had any symptoms yet for about an hour.
Is this normal for a hard drive on an iPod to glitch after a battery replacement? I had no such problems when I had the other battery in it, so it's hard to believe that the hard drive is going bad exactly at the same time I changed batteries. It is the right battery for the right iPod, anyone else experience this or have any words of wisdom or comfort?

rsherid wrote:
Pretty fast and non-stop, even when I'm not working. Could it be dirty? Is there a way to clean it?
Does the Apple store charge just to look at something?
Even if the noise was a dirty hard drive you can't clean the innards of one. You cannot even open one. Well you can, once.

FRAME "GLITCH" AFTER MOTION EXPORT

Similar Messages

Maybe you are looking for