Frame issue in Workspace with IE8/XP/Reader 9.4

When a user opens a form from a "to do" in Workspace, the form opens in a frame outside of and superimposed over the normal Workspace interface.  This obscures the user action buttons, which stops the process at that user (since they can perform no actions).  The "save" button is partially visible and can be clicked, as can the "Task Details" tab.
Any suggestions for how to deal with this framing problem?  Obviously the user can access the form from another computer, but if this issue is related to software configuration, I would prefer to resolve it that way, since many users in our environment have this configuration.
Thanks
Toby

I am unable to reproduce the problem on my IE8/XP/Reader 9.4 platform.  After updating to Reader 9.4 I did have to re-enable the Reader Internet Preference to allow the pdf to display within the browser.  You can check that setting in your Reader preferences but I don't think that is your problem.  When it was off I was prompted to intall Reader, it did not try to open the Workspace pdf outside of Workspace.
What is the zoom setting on your browser?  I believe there is a problem if the zoom level on I.E. 8 is more than 100%.  If it is higher try setting it to 100%, closing your browser and then try opening the Workspace task again.
Hope that helps.

Similar Messages

  • 720p60 P2/HD Dropped Frame Issue

    I'm having a dropped frame issue in FCP with some P2 720-60p footage. I can't get it to play through a sequence without freezing and giving me a warning. We've narrowed it down to an apparent processor issue. There are two tracks of audio (a stereo pair), and two tracks of music (again, a stereo pair). When we turn off the music, the sequence plays fine. But when the music goes back on, the sequence chokes. The funny thing is, I just did an HD project shot in 24p/n with several tracks of audio and several tracks of video and, aside from needing to render certain things, it played fine.
    Any ideas?
    Here are the specs:
    P2 footage originated in 720/60p
    AUDIO/VIDEO SETTINGS:
    Sequence Preset: DVCPro HD 720p60
    Video Playback: None (there isn't an output card for this computer).
    SEQUENCE SETINGS:
    Frame Size: 960x720 (HD 960x720 16:9)
    Pixel Aspect Ratio: HD (960x720)
    Editing Timebase: 59.94
    Compressor: DVCPro HD 720p60
    Audio Rate: 48 kHz
    Depth: 24
    Config: Default
    Any ideas here?
    Thanks,
    Tim Walton
    KVIE Public Television

    Then it's pointing at a throughput problem between the RAID and the server I'll guess. Trouble shooting that could be interesting. Can you move the media to a local drive?
    I'd also be interested to see what AJA's read/write speeds are on that RAID from your station...
    Post the gear between your mac and the server etc.. whose RAID is it, How is it formatted? Got a model number of each of the devices involved? Mac Server?
    Jerry
    You've selected the "Easy setup" for the format you're editing too, right?

  • A serious issue with excel file read in ODI

    hi gurus,
    Issue with excel file read is that we can read only one file by setting the path from ODBC Data Source Administrator-->System DNS -->Select Work book
    what i want to read the dynamic path(Every time I cant go back and set the Work book to select the excel file..
    So i came up with a solution to write a Vbscript that convert the excel to csv my problem got solved for dynamic paths the script is as follow:
    Set objArgs = WScript.Arguments
    For I = 0 to objArgs.Count - 1
    FullName = objArgs(I)
    FileName = Left(objArgs(I), InstrRev(objArgs(I), ".") )
    Set objExcel = CreateObject("Excel.application")
    set objExcelBook = objExcel.Workbooks.Open(FullName)
    objExcel.application.visible=false
    objExcel.application.displayalerts=false
    objExcelBook.SaveAs FileName & "csv",23
    objExcel.Application.Quit
    objExcel.Quit
    Set objExcel = Nothing
    set objExcelBook = Nothing
    Next
    Now this script convert the xls file to csv with comma seprated values
    e.g in excel sheet if data is ABC XYZ PQR
    csv will come with ABC,XYZ,PQR
    here the delimiter is , i want the delimiter as pipe | who's ascii code is 124
    but if i change 23 with 124 its not working i getting the error cannot save as...
    can anyone tell me that what should be the correct code for pipe
    so that the output is ABC|XYZ|PQR
    AS WE CAN USE THE SCRIPTS IN TOOLS
    Edited by: 789141 on Sep 14, 2010 11:33 PM

    I dont have the answer for your question but i have different approach in handling multiple Excel File.
    Step 1. Copy a sample source Excel File and Call it Final.xls .
    Step 2. Map this Final.xls to DSN and in Topology call this Final.xls
    Step 3. Do the Reversing and Map and test the Interface . Once its done.
    Step 4. Create a Package and using a http://odiexperts.com/?p=1426 get the list of all the Excel File
    Step 5 . Using this http://odiexperts.com/?p=273 create a Loop to Read the Excel File name
    Step 6 . Copy using OdiFileCopy to Final.xls and run your interface .
    Step 7. Increment the Loop and copy your next File for Final and run the interface
    Step 8 . Finally you will be able to read all the Excel File .
    Step 9 . Delete the source file [ Optional ]
    Hope this helps.

  • Print issue with Adobe PDF reader print in IE9

    We are unable to print Brava PDF documents with Adobe PDF reader activeX enabled in IE9. The same runs fine in Chrome with  Adobe PDF reader activeX enabled.
    I noticed Chrome uses
    C:\Program Files\Adobe\Reader 10.0\Reader\AIR\nppdf32.dll, whereas IE9 uses-C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroPDF.dll. 
    Has anyone faced this issue?

    Can you print other pdf files from within IE9? Can you download the files and print them directly from Reader on you computer? Please list the steps you are using to print the pdf from IE9.

  • Comptability Issue with IE8.0 in SRM 4.0

    Hi All,
    Some of my SRM users are facing issue with IE 8.0. I understood that IE 8.0 is not a compatible version for SRM 4.0 But just of checking, if you guys have faced this issue and fixed it. This issue could be related to IE - Java - SRM.
    In shop one screen, users can able to do everything. But if they try to open Approval preview tab or Follow-on document tab in check status transactions, then browser is automatically getting refershed and take the user to the portal home page. I believe both these tabs are working on Java. We tried with udpating Java with different versions, but nothing is working with IE8. We do not have any issue IE6.
    Have any one faced the similar issue and fixed it? OR if you have any suggestion, please advise.
    Thanks.
    Arun

    Hi Ricardo,
    Thank you for the reply,
    I checked PAM in service market place. For an end user pc requirement, is it enough to check under ITS in Web browser?
    In that, against IE 8.0 ...it has been mentioned as "Released"? Does it mean that, SAP will support issues occuring with IE 8?
    But I dont see anything related to Java vitual machine.
    Can you please advise, whether my understanding is correct?
    Thanks.
    Arun

  • Open PDF in IE8 with Acrobat, not Reader ?

    Hi Chaps,
    I used to be able to open a PDF from a HTML link, which would then open in Internet Explorer 8 using Adobe Acrobat.
    Since installing Adobe Reader, all PDFs open in IE8 using Reader, instead of Acrobat, so now I cannot edit the PDF.
    I've searched through Preferences in both programs, changed all associated program file types to Acrobat, reinstalled Acrobat but I cannot get it back!
    I'm using Windows 7 [64-bit], Acrobat 9, Reader 9.
    If anyone knows which option to change, it'll help me out no end!

    Adobe doesn't support Reader and Acrobat on the same Windows computer. Uninstall Reader and then re-install Acrobat.

  • Dropped frames issue on a G5 2.7DP w/DV footage

    Let me first tell you my setup:
    G5 2.7 DP
    8 GB RAM
    WiebeTech TrayDock eSATA 4-bay drive enclosure w/Sonnet 4+4 eSATA PCI Card
    (2) 400 GB Seagate Barracudas in the enclosure RAIDed in a striped config using Apple's Disk Utility
    10.4
    FCP 5
    At seemingly random times, playback from the timeline will stutter and stop, thus throwing up the dropped frames dialog box. If I re-play from the same point, it will normally play. This has happened on several current projects in which I'm working in DV. I've also worked on a project in 8bit uncompressed using my Kona LS card with the same drives, and had the same error.
    I've had this issue ever since I setup this system--from the first install of FCP5 to the most recent update of 5.0.3, as well as from 10.4.2 to 10.4.3. I've tried turning off the internal Airport card in the G5, and quitting all other programs.
    There is a little utility that came with the Kona card to test data rate of your drives. I'm getting well over 100 MB/s Read, and slightly less write rates, so it seems like drive speed isn't an issue.
    What is the weak link here? WiebeTech was nice enough to send me a replacement eSATA PCI card, and the issue hasn't gone away, so it wasn't a bad card, although I guess there could be some flaw inherent in all of the cards.
    What other steps should I take to try and isolate/solve this problem? This is kind of embarrasing that I can't play DV footage on the timeline without the possibility of dropping frames--even when working with only one layer of video.
    I'm capturing video to the eSATA RAID, and my project files/graphics reside on an internal SATA drive in G5 (not the boot drive--I added another seagate 250 gb). Seems like there should be enough throughput in this thing to handle basic edits, but I'm beginning to have my doubts....
    Your ideas?????

    Clay,
    Regarding your statement "My thinking initially about my workflow was to not keep them on the same drive as the footage because my feeling is that the RAID isn't as "safe" as the single 250 GB drive I have inside the G5".
    I store all of my media, GFX and project files on whatever FW drive I happen to be using for a project. I NEVER have media for a specific project on two or more drives. For safety's sake, I ALWAYS have my Autosave Vault set to my internal drive, with a relatively high save rate (every 10 min). That way if the FW drive ever failed completely, I'd at least have a recent copy of the project file to work with (even if I have to redigitize the footage or redo the GFX). All I can say is keep all of your media (per project) on one drive - it's been kind of the Bible in this industry for years, and as far as I know it hasn't changed.
    As far as RAID's go, I'm no expert. But if I remember correctly, back in my old Avid days we also used to avoid having the media on different striped partitions - something else you may want to try if you're media is spread across a few stripes.
    It seems like I've run across more than a few posts here regarding the same problem happening on Dual 2.7's. You may want to do a more thorough search here to see what you come up with. All I can say is I'm running FCP 5.0.3 on a G5 Dual 2.0 with only 2.5 meg of RAM and have had no dropped frame issues.
    Try Matt's suggestion of playing some footage off of your boot drive (NOT recommended for everyday use!). If it works then it's got to be a problem with your RAID and not FCP.
    Good Luck!
    jeff

  • How to overcome "dropped frame" issues on my project

    Hey reader,
    I have a MacBook Pro 2.4GHz with 250GB hd (85GB free just now) running 10.4.11, FCE HD 3.5 (and QT 7.5.5) and using a Sony Handycam DCR-HC96 (which is works BEAUTIFULLY with iMovie 08 and 6 and is always used with Sony tapes) and I am not able to "capture" the tape content to my MacBook Pro because of the "dropped frame" issue.
    The camera is connected to the external hard drive chain via Firewire cable to the MacBook Pro and I was trying to capture to the internal hard drive. I am in the UK and am still struggling to get my head around the different frame rates but initially I got the dreaded "dropped frames were encountered during the last capture attempt" and it just wouldn't work, so I unselected the report dropped frames tab and abort capture in User Preferences as was suggested on here.
    Now I get "Capture encountered a problem reading data on your source tape. This could be due to a problem with the tape. Capture has been aborted and your clip has been saved" but the tape is fine (heads are also clean) as I had to (under time pressure, me) use iMovieHD 6 instead and it worked like a CHARM.
    What can I do to use this software?
    I KNOW I can import the iMovie footage but the disadvantage is the eternal rendering, I guess. I only ever used it once (because of its difficulties) and that was for pre-existing footage from iMovie and it was OK if not perfect. Just had to have a few hours extra for the constant rendering in preview...
    Should I try to capture to one of the external hard drives? I read that the internal might be a problem as it is busy with the operating system jobs.
    Please and thank you.

    I got some dropped frames last night and posted this before noticing your post:
    There can be a number of reasons for getting dropped frames during capture.
    Yesterday I videoed a relative's wedding (in HDV) and on getting home late I captured the footage into FCP 6.0.3 only to find in a couple of places I got an abort on dropped frames.
    This morning I decided to recapture and did so without a single dropped frame.
    Why ? ......... there are several possibilities.
    It could be that there was some physical problem with the tape or camera heads but I believe it was most likely caused by my camera's power supply.
    Last night I used the battery whilst this morning I plugged in the power connector.
    I feel that this provided a more constant supply of full power and helped prevent frames from being dropped. (The fact I was using FCP is immaterial as the dropped frames would almost certainly have also occurred in FCE).
    From now on I will always use the power connector during transfer to and from the camera.

  • Firefox 3.6.6 doesn't display text correctly (looks like draft mode) in web pages (I have compared it sidse by side with IE8)

    Using Firefox 3.6.6 text displays on the screen looking like a draft mode print, or like it was printed with a dot matrix printer. I have compared it to IE8, which displays much better. I was thinking it was a display setting until I compared it to IE8. I have looked thru all the settings in Firefox I can find, but no improvement. Also thought it might be my new (second hand) monitor until I did the side by side comparison with IE8.
    == This happened ==
    Every time Firefox opened
    == Got new computer and updated to Firefox 3.6.6

    I also have this problem and it just started in the last week or so. It seems to be dependent on my home network and the problem only exists with firefox. I have used chrome and IE8 with no issues. I can verify tomorrow that it only exists in my network but one thing I was able to test is that the problem exists even on my linux boot. I am totally dumbfounded with this problem and I can't find anything that will allow the gmail page to load. All other pages I have tried load fine, all be it a little slower than normal but they load. If anyone knows of a difference between firefox and all other browsers on how it goes through the router I would appreciate the info cause I don't know of any differences.

  • IWeb video issues for Evo with Droid

    Here is my setup. I dragged a bunch of MP4's into IPhoto to make an album. Then I opened IWeb and created an album page. I then dragged the newly made album from IPhoto into the well on the IWeb page. Then I set the poster frame on each video and put the videos in order. I did not check auto play. Next I published to a folder and then FTP'd that to my Godaddy account.
    When I open the page with my desktop machine, I click the album, then a video and the video pops up with the control bar underneath. I hit play and all is beautiful. Now with my evo, I open the page, click the album, then a video. The poster frame of the video pops up but there is no control bar. There is no way to play the file. In the upper right is a small link that says download. When I click that, the video opens and plays fine.
    My question is that I am afraid people won't see this little download link. Is it supposed to work this way or will I need to somehow add a disclaimer to let people know they need to click this in order to play? It is really small and I don't think people will see it.
    Here is the link if there are any mobile viewers out there. http://www.texasmusicchannel.net/TMC_Beta/MMB/MMB.html
    Also, is there anyway to get the nicer looking controlbar from QT 10?
    Jeff

    Have you tried a restart from device info, reset options? This will resolve many problems and is the first thing I would try. I have not heard of any problems with the YouTube app. I have tested the YouTube app on my own Pre Plus an it is working without any issues. Have you installed any 3rd party (homebrew) apps? Some times this can cause a problem with installed apps.

  • New fingerprint software is not working with IE8 and FF3

    I have downloaded the latest version but it still does not resolve the issues with IE8 and FF3...
    Please, Please...
    Fix the main issue of the software unable to save website login details with Internet Explorer 8+ and Firefox 3+
    Thanks
    Stewart Grainger

    Hello
    I am pretty sure they know about this issue and software companies must not hear what the people say. For me it is logic that they watch what happen on the software market and try to adapt own products as soon as possible.
    This issue with IE8 is known and soon or later the updated version will be offered on download page but the question is: when?
    I cannot understand why they wait so long time. OK, to fix some issue and testing procedure can take a days but IE8 is not on the market from yesterday.
    Lets see how long it will be necessary for AuthenTec to fix this issue.

  • Reconfigure issues in EPMA with hyperion products(essbase,HFM,Planning)

    Hi All,
    Reconfigure issues in EPMA with hyperion products(essbase,HFM,Planning,calc manager,etc.,)
    I have created new schema for foundation and one more schema for all other hyperion products and try to reconfigure but i unable to configure and all components are not shown in some hyperion products( in workspace in administer im unable to see classic application, in essbase im unable to see all application...).
    as per my understanding im unable to see *"Registerd with shared services"* for each products in the final stages of configure.
    Please try to know that what may be the cause.
    Thanks & Regards,
    Kittu.

    I can't answer the Import profile, though could you expand on
    mrojik-bubik wrote:
    In planning i was not able to import Security and planning units. Can you please help?Are you trying to import access permissions using LCM ?
    If you are importing security into a target application then I believe that the users will need to exist in the tables before you do so.
    I would run the provisionusers.cmd or go into the planning app and go to provision dimension security and click migrate identities.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Problems with IE8 "not responding" on windows 7

    I have a Toshiba Satellite L-355  that has been upgraded to run Windows 7 Home Premium from Windows Vista. I've been having problems with IE8 "not responding" and have tried running it without add-ons, system restore, and banging my head against the wall. All to no avail. Does anybody have any ideas how to fix this? I've tried running other browsers with the same problems.

    Intel(R) HM55 Express Chipset LPC Interface Controller
    Thanks, sav! That's perfect. (Good to know it shows up in Device Manager for people, too.)
    Okay ... although it's the Intel P55 and PM55 chipsets which get all the press about cranky Touch/iPhone connections on Windows 7 systems (the 0xE0000065, -6999 and "Disk can not be read or written to" error messages are the most common, although symptoms can vary further than that), similar sorts of issues look like they could strike other Intel 5-series chipsets ... including your HM55.
    So I'm proceeding precisely as I would with someone with a PM55 chipset.
    *1) Dell updates*
    Some folks with 5-series chipset trouble have got past it by way of BIOS updates. So I thinks it's worth your heading to your Downloads page at Dell, and checking to see if there's any newer versions of your BIOS lurking there. Unfortunately, with the Studio 15s I'm never precisely sure which is the correct downloads page ... so I'd try going to the following Dell page:
    http://support.dell.com/support/downloads/index.aspx
    ... enter your service tag, and then drill through to your downloads page.
    Any improvement with your syncing performance after applying any available BIOS updates at Dell?
    *(2) Adjust power management setting on USB controllers*
    If no joy after updating (if you were behind on your BIOS version), try applying the measures from the following document:
    [iPod not recognized when connected to Windows laptop over USB|iPod not recognized when connected to Windows laptop over USB]
    Reboot the PC after making the changes, and then try another sync. Any improvement?
    (If either set of measures improves your sync performance, please post back to let us know which one helped for you.)

  • Forced Logouts with IE8

    Unable to use webmail service because I am force logged-out each time I try to logon.  The webmail client goes through a series attempting to load and quickly logging out three times before I am entirely kicked out of the email system.
    The date and time on my PC are correct and I have cleared the chach and cookies from my web browser on numerous occasions.  I would note that my emails display as London time when working in webmail. 

     Hi sorry to hear you are having an issue with IE8 and our webmail site.   I recommend the following steps:
    1.  Open IE
    2. Click on Tools
    3. Select Internet Options
    4.  Click on the Advanced Tab
    5.  Click on Reset 
    6. Once the reset is complete, try logging back into webmail
    If this doesn't work try using another browser like Mozilla Firefox or Google Chrome and see if they have the same issue as IE8.
    Shamika_Vz Verizon Support
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

  • Official comment from Apple about the drop frame issue?

    Is Apple going to firmware fix the skipping drop frame issue on the Apple tv?
    Or is it hardware related?
    Too many of us seem to have experienced this issue for it not to be addressed.
    It shouldn't be difficult to fix.
    My 1st gen atv was fine.
    I should have kept it.

    Hopefully it can be fixed. Seeing as Apple has not even acknowledged it I returned mine yesterday since I was coming up on my 30 day return deadline. At least this way I'm not stuck with a device that has a hardware issue.
    As of yesterday I have seen this issue on 10 different New Apple TV units, all on different HD sets, different network setups etc. Half of the owners had never noticed it. Two of those were adamant they did not have the problem and one of those still insisted they didn't after I spotted it multiple times. So while the issue has been present on 100% of the units I have seen, its not necessarily noticeable to everyone. I have noticed its much easier to spot on larger displays and when the display quality itself is higher, for example easier to spot on a higher quality 61" 1080p set than a lower quality 720p 26".
    If you have the option I would return the unit. Worse case is your don't have the unit, which is not functioning 1005 anyway, for a short period and then grab it again if the issues get addressed.

Maybe you are looking for