Frame names not listed

I'm new to DW CS3. I'm using a frameset structure but the
frame names do not list in the target field of the properties panel
(shows "_blank, _parent" etc. defaults only but no created frames).
Frame names are also missing from the "GoTo URL" list of the
Behaviors function (shows "Main Window" only).
The frameset code contains the correct names and syntax.
Any suggestions appreciated.

I haven't used frames in years, but I believe you have to
have the frameset
open and the pages within it in order for the frame names to
show in the
target field. Try that.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"daithio" <[email protected]> wrote in
message
news:fs34to$4ka$[email protected]..
> I'm new to DW CS3. I'm using a frameset structure but
the frame names do
> not
> list in the target field of the properties panel (shows
"_blank, _parent"
> etc.
> defaults only but no created frames). Frame names are
also missing from
> the
> "GoTo URL" list of the Behaviors function (shows "Main
Window" only).
> The frameset code contains the correct names and syntax.
> Any suggestions appreciated.
>

Similar Messages

Contact name not listed in skype directory

Skype won't recognize either a existing contact's name, email, user name, or telephone number

it's important to use 10-digit or fullly compliant international numbers for all contacts to keep things working smootly.
on the other hand, if when you have the contact properly filled out and the recent calls or sms list show just the number it's likely a corrupted addressbook.
I had this problem since i restored my iPhone 4 onto my iPhone 4s. turned out to be a corrupted address book database on the phone.
deleting the database @ /Users/Library/AddressBook (all files starting with AddressBook) (while Addressbook NOT running and when iCloud sync and iTunes sync both off) and re-run address book to create empty database before re enable sync solved it!

Macbookpro imessage contact names not listing - just numbers

Hi there,
I'm starting a new thread about this because everything I have read through has confused me.
I just had a new hard-drive installed on my Macbook Pro (mid 2009) and Mavericks installed.
All is great, BUT I can't get names to show up on my iMessage here on the Macbook. It's just phone numbers..
I've checked region and language settings (all was fine) and I have synced and checked iCloud... I've disabled and enabled the account through iMessage... All seems right but just can't get names to show up. My contacts are synced, because I see them in my Contact App.
Can someone please help me?
Gratefully,
Veronica

I found the fix. For some reason, my iCloud account preferences setting (in System Preferences) had Contacts unchecked ... something happened during my 10.9.5 upgrade? Not sure. But, all good now.

PSA table name not visible in the list

Dear All,
I have been trying to delete the data from the PSA tables using the process type Deletion of Request from PSA and the Object type PSA TABLE.
When searching for the PSA table name in the Object Name list, I am not able to get one of the PSA table names (/BIC/B0000505). Though I am able to get all the other table names in the list. (Ex. /BIC/B0000504 , /BIC/B0000506) .
Please let me know the possible reason for this and how to rectify the same so as to include that PSA table name
Regards
Shalabh

Hi Raghavendra,
The table is present in the system (SE11/SE16) and contains data as well.
The problem is, I am able to find the other tables from the same datasource in the list, but am not able to find this only PSA Table in the list.
Has it got anything to do with corrupted PSA table and need to re-tranport the Datasource ??
Regards
Shalabh

New JCo names are not listing in WB Content Administrator

Dear Friends,
I have deployed my WebDynpro application on a landscape where the production system got 4 server services running.
Initially the WD application was using the existing JCo connections. But on the latest deploy I have to use new JCo connections and I made changes.
Problem is, these new JCo connection names are not appearing in WebDynpro Content Administrator and still it displays old JCo connections.
This problem exists with global WD Content Admin. URL as well as with individual server url, except in one server instance where JCos yet to be created.
But when I execute the application with global URL, it is working fine.
Intent is to create and use my new JCo connections for the application which are not listing in WB Content Admin.
Is it require to restart the server services?
Is it possible to solve this problem without restarting the services?
Is there any other way to resolve this problem?
Thanks in advance.
Lakshmikantha

Sorry I can't approach to restart the j2ee service at this movement.
And the application got new JCo name at it's JCO refrences.
Infact the application is working fine with new JCos on development and quality systems.
Problem exists only on production system where it got 4 server instances.
Any hope without restarting services?

Anyone notice that text/iMessages are not listed by contact's name but the contact phone number now?

Anyone notice that text/iMessages are not listed by contact's name but the contact phone number now after 5.0.1?

Yes, I just noticed this after upgrading to 5.0.1. That's why I came here to this forum. I tried re-syncing with address book, but it didn't help. Not only is my text messages only showing phone numbers, instead of contact names, but my call log is doing that as well.

Question: When I want to send SMS and click on the contact, the contact came out with names and numbers, as if the whole contacts are there in the phone. When I open the contact, I can only see 3 contact names and the rest of 4000 contacts are not listed

Question: When I want to send SMS and click on the contact, the contact came out with names and numbers, as if the whole contacts are there in the phone. However, when I open the contact, I can only see 3 contact names and the rest of 4000 plus contacts are not listed, and it makes you difficult to call through contact

The iPhone remembers information about previous contacts.
Complelely independently, you have a Contacts app with a contacts list. It sounds like your contacts list has 3 names on it. You need to add a few names.

Visa Resource name does not list anything

Hi,
I recently installed a Agilent 82357B GPIB and along with it I also installed Agilent IO 16.3. This GPIB is hooked up to a power supply. I am able to find and query the device in MAX and Agilent IO, but when I use the Visa Resource Name control in a VI, it does not list anything. Before I used to see LPT1 and COM1, but now even they have disappeared. All these are present in Device Manager. Even VISA interactive control throw an error. Attached are screenshots for some reference.
HP_GS
Attachments:
VisaResource-Refresh.png ‏2 KB
Visa-IC.png ‏7 KB

Hi there,
You might want to read this post about the specific error.
Also you need to make sure the right class is slected for the visa resource (right click):
Hope that helps, regards W

Postfix relay=none, ... status=deferred (Host or domain name not found...

Hi,
I actually posted this question 2 weeks ago but under the wrong topic. So, first of all wanted to apologise for double-posting... but since no one replied, I thought I'd try again under the right topic.
I've been trying to solve this all day today (that was Feb 26th). I used to be able to send emails but for some reason it does not work anymore. At first I thought it was a problem with php (I use entropy pack php 5.2.6) but after searching the topic, I think it is a problem with my network. BTW OS is 10.5.5 and Postfix version 2.4.3
First of all, after computer restart, I don't think postfix starts automatically
Running 'sudo postfix start' gives me:
postfix/postfix-script: starting the Postfix mail system
Looking at '/var/log/mail.log' I find:
Feb 27 12:51:04 AMs-MBP postfix/qmgr331: AA70A7A7C77: from=<[email protected]>, size=842, nrcpt=1 (queue active)
Feb 27 12:52:19 AMs-MBP postfix/smtp456: AA70A7A7C77: to=<[email protected]>, relay=none, delay=3437, delays=3362/0.02/75/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=email.com type=MX: Host not found, try again)
Running 'sudo postfix check' does not give me any errors
Checking my '/etc/resolv.conf' it has nameserver 192.168.1.1
Running 'ifconfig | grep netmask | grep -v 127.0.0.1 | awk {'print $2'}L' gives:
192.168.1.5
Checking http://switch.richard5.net/2006/08/19/fatal-open-lock-file-pidmasterpid/ and running 'launchctl list' gives me a long list but no item matches org.postfix.master
Running 'ps aux|grep postfix' gives
AM 546 0.3 0.0 599820 468 s000 S+ 1:41pm 0:00.00 grep postfix
_postfix 331 0.0 0.0 599816 824 ?? S 11:56am 0:00.04 qmgr -l -t fifo -u
root 329 0.0 0.0 600784 752 ?? Ss 11:56am 0:00.11 /usr/libexec/postfix/master
_postfix 519 0.0 0.0 599768 752 ?? S 1:36pm 0:00.01 pickup -l -t fifo -u
Running 'postconf inet_interfaces' at first gave me
inet_interfaces = localhost
which I changed to All in '/etc/postfix/main.cf'
I looked at http://www.postfix-book.com/debugging.html
Running 'telnet localhost 25' gives me
Trying ::1...
telnet: connect to address ::1: Connection refused
Trying fe80::1...
telnet: connect to address fe80::1: Connection refused
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
220 AMs-MBP.local ESMTP Postfix
quit
221 2.0.0 Bye
Connection closed by foreign host.
But running 'telnet 10.1.2.233 25' gives me
Trying 10.1.2.233...
telnet: connect to address 10.1.2.233: Operation timed out
telnet: Unable to connect to remote host
Running 'ping 134.169.9.107' takes a long time. After a while I stop it and get:
PING 134.169.9.107 (134.169.9.107): 56 data bytes
^C
o
+ 134.169.9.107 ping statistics ---
28 packets transmitted, 0 packets received, 100% packet loss
I have not idea what the problem is and/or how to fix it. I know the messages get to the postfix daemon but for some reason they do not continue on their way.
Please, does anyone have an idea of how to fix this?
TIA,
Elle

Dynamic IP addresses with DynDNS Updater (or equivalent) makes it pretty darned reliable, particularly if you buy DynDNS' Mailhop Forward service, which prevents the likes of roadrunner.com and aol.com from blocking mail coming from your server just because it lives in dynamicIP-land. Way cheaper than paying your ISP extra for a static IPA, too, and totally acceptable for low-volume, residential-based servers for personal not-for-profit use.
Regarding reliable delivery to a dynIPA server, you are only at risk of non-receipt for perhaps a few minutes immediately following when your ISP rotates your WAN IPA, until DynDNS Updater (or equivalent) updates the DynDNS (or equivalent) servers with your new WAN IPA. But that's really not a problem because I think all, well, okay, most, smtp servers will queue for a redelivery attempt if the initial delivery attempt just happens to occur at that time.
I wouldn't suggest this practice for high-volume enterprise-class servers or for people trying to run a bootleg mail server business for profit (besides, the ISP would shut it down as an abuse of terms of service, anyways), but for low-volume, residential-based servers for personal use and enjoyment, which I suspect is the case for the O.P., I can't say that I find anything unreliable about my dynamic IP-based mail server.

HT1451 Why do the song names and cd name not show up on the IPod Shuffle?

Why do the song names and cd name not show up on the Shuffle?

MysticChyk wrote:
Why do the song names and cd name not show up on the Shuffle?
Err this is no longer April 1st you know.
The iPod Shuffle has never had a 'display' on which track names can be shown. See http://www.apple.com/ipod-shuffle/ if you want an iPod which does have a display on which you can see the tracks names and even the album cover art then look instead at the bigger and more expensive iPod Nano http://www.apple.com/ipod-nano/ or iPod Touch http://www.apple.com/ipod-touch/
PS. The current iPod Shuffle even though it has no display on which it can show the track names can read them out loud to you using a voice-synthesiser this is the VoiceOver feature described on the iPod Shuffle product page I listed above.

Event Receiver to get folder Names from List View Web Part

Hi,
We have a requirement i.e.
On one of the page,there are some folders on the list view web part.
Now through event receiver i should pick the folder names from list view web part and
update the same in the list.
If that names already exists in the list then we should leave without updating,if not we have to add folder name in the list.
Please share your ideas regarding the same.
Regards,
Naga Sudheer M
Thanks & Regards, Sudheer

Hello,
LVWP is just for displaying content of site so you need to associate your event receiver with actual list/library. You can create ItemAdded event receiver to check existing folder and create new if not existing. "sk2014" links are good to start.
http://sharepoint.stackexchange.com/questions/59788/change-name-in-itemadding-event-receiver-or-create-a-new-item
Let us know in case any doubt
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Network Name not going online during Install

I have 2 servers connected to a Fibre SAN both running Server 2012 in a Failover Cluster. I have been trying to install the first of a Failover SQL 2012 Cluster. Everything installs properly until it gets to the final phase of the install and the Network
Name will not go online. I have removed and reinstalled many times with no success.
If I leave the install alone it will eventually go online however when that happens and I try to install the second node it gets to the Services part of the install and does not have one of the accounts in it. It is set as read only and I cannot change it
so I cannot continue the install.
Here is the log file I get after the initial install, I see nothing in it to point to the problem. I have tried manually creating the server in AD, in DNS etc.
Thanks!
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068774911
Start time: 2013-01-15 11:13:04
End time: 2013-01-15 11:23:19
Requested action: InstallFailoverCluster
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Cluster properties:
Machine name: ServerName
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2012
Management Tools - Basic 1033 Standard Edition
11.1.3000.0 No
SQL Server 2012
Management Tools - Complete 1033 Standard Edition 11.1.3000.0
No
Machine name: STVM5
Product Instance Instance ID
Feature Language
Edition Version Clustered
Machine Properties:
Machine name: ServerName
Machine processor count: 24
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: Yes
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2012
Management Tools - Basic 1033 Standard Edition
11.1.3000.0 No
SQL Server 2012
Management Tools - Complete 1033 Standard Edition 11.1.3000.0
No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: L:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: InstallFailoverCluster
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: Domain\SQLClusterAgent
AGTSVCPASSWORD: *****
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20130115_111217\ConfigurationFile.ini
ENU: true
ERRORREPORTING: false
FAILOVERCLUSTERDISKS: Cluster Disk 1
FAILOVERCLUSTERGROUP: SQL Server (SQLCLUSTER)
FAILOVERCLUSTERIPADDRESSES: IPv4;x.x.x.x;Cluster Network 1;x.x.x.x
FAILOVERCLUSTERNETWORKNAME: ClusterName
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLCLUSTER
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: O:\
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLCLUSTER
INSTANCENAME: SQLCLUSTER
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
PID: *****
QUIET: false
QUIETSIMPLE: false
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: O:\MSSQL\Backup
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: Domain\SQLClusterEngine
SQLSVCPASSWORD: *****
SQLSYSADMINACCOUNTS: Domain\user1, Domain\user2
SQLTEMPDBDIR: O:\MSSQL\TempData
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: O:\MSSQL\Data
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20130115_111217\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x86D80058
Error description: The cluster resource 'SQL Server (SQLCLUSTER)' could not be brought online due to an error bringing the dependency resource 'SQL Network Name (ST-SQLCluster)'
online. Refer to the Cluster Events in the Failover Cluster Manager for more information.
Error help link:
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x86D80058
Error description: The cluster resource 'SQL Server (SQLCLUSTER)' could not be brought online due to an error bringing the dependency resource 'SQL Network Name (ST-SQLCluster)'
online. Refer to the Cluster Events in the Failover Cluster Manager for more information.
Error help link:
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x86D80058
Error description: The cluster resource 'SQL Server (SQLCLUSTER)' could not be brought online due to an error bringing the dependency resource 'SQL Network Name (ST-SQLCluster)'
online. Refer to the Cluster Events in the Failover Cluster Manager for more information.
Error help link:
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x86D80058
Error description: The cluster resource 'SQL Server (SQLCLUSTER)' could not be brought online due to an error bringing the dependency resource 'SQL Network Name (ST-SQLCluster)'
online. Refer to the Cluster Events in the Failover Cluster Manager for more information.
Error help link:
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20130115_111217\SystemConfigurationCheck_Report.htm

Here are the results:
Warnings
Cluster Configuration
Validate Resource Status
 Validating cluster resource IP Address: 10.10.32.216.
 This resource does not have all the nodes of the cluster listed as Possible Owners. The clustered role that this resource is a member of will not be able to start on any node that is not listed as a Possible Owner.
 Validating cluster resource Name: ST-SQLCluster.
 This resource does not have all the nodes of the cluster listed as Possible Owners. The clustered role that this resource is a member of will not be able to start on any node that is not listed as a Possible Owner.
 Validating cluster resource SQL Server (SQLCLUSTER).
 This resource does not have all the nodes of the cluster listed as Possible Owners. The clustered role that this resource is a member of will not be able to start on any node that is not listed as a Possible Owner.
 This resource is configured to run in a separate monitor. By default, resources are configured to run in a shared monitor. This setting can be changed manually to keep it from affecting or being affected by other resources. It can also
be set automatically by the failover cluster. If a resource fails it will be restarted in a separate monitor to try to reduce the impact on other resources if it fails again. This value can be changed by opening the resource properties and selecting the 'Advanced
Policies' tab. There is a check-box 'run this resource in a separate Resource Monitor'.
Hyper-V Configuration
Validate Matching Processor Manufacturers
 Node Processor Manufacturer Version
 Server1.Domain.com AuthenticAMD AMD64 Family 16 Model 9 Stepping 1
 Server2.Domain.com AuthenticAMD AMD64 Family 16 Model 4 Stepping 2
 The processor version is not consistent across all the nodes. This is important because Hyper-V may not be able to live migrate a virtual machine between processors of different versions.
Network
Validate IP Configuration
 Verifying that there are no node adapters with the same MAC physical address.
 Found duplicate physical address D0-67-E5-F9-33-AA on node STVM4.SedonaTek.com adapter vEthernet (Inside Trunk) and node STVM4.SedonaTek.com adapter InsideTrunk - VLAN 100 - Management LAN.
System Configuration
Validate Software Update Levels
 KB Article Title Support Security Bulletins
 2770917 Update for Windows Server 2012 (KB2770917)
 Software Updates missing on 'Server2.SedonaTek.com':
 All software updates present
 The servers do not all have the same software updates.
I don't believe any of the actual warnings, those not related to the SQL install, will cause a problem.

How do I create a series of text frames from a list of files?

And I'm back again.
This time, I'm wondering how I can use JavaScript to place a series of text frames from a list of files, preferably with the ability to specify criteria before running the script.
Here's the details: I work for a newspaper and I lay out stories for the pages (in addition to the other part of my job, laying out ad spaces, as detailed in a previous thread, for which I requested another script, thanks Andreas and Jongware ). The file names for the stories are labeled for the section they go in, like L- for Life, C- for Comment, S- for Sports, etc.
I'd like to create a script that asks for a criteria in a text box (where I can type L-, C-, S- or whatever else I need) and then places all of the stories, in a specified directory, whose file names match what was typed in the box, one text frame for each.
I can't rightly tell if this is a simpler or more difficult script to write out, but I plan on putting research into it as usual so I can develop it myself. However, I figured it would be more efficient to ask first, then research, so that while I'm researching, I can refer to the opinions of my fellow forumites, and/or the mods.
Thanks again for any assistance offered.

And I'm back again.
This time, I'm wondering how I can use JavaScript to place a series of text frames from a list of files, preferably with the ability to specify criteria before running the script.
Here's the details: I work for a newspaper and I lay out stories for the pages (in addition to the other part of my job, laying out ad spaces, as detailed in a previous thread, for which I requested another script, thanks Andreas and Jongware ). The file names for the stories are labeled for the section they go in, like L- for Life, C- for Comment, S- for Sports, etc.
I'd like to create a script that asks for a criteria in a text box (where I can type L-, C-, S- or whatever else I need) and then places all of the stories, in a specified directory, whose file names match what was typed in the box, one text frame for each.
I can't rightly tell if this is a simpler or more difficult script to write out, but I plan on putting research into it as usual so I can develop it myself. However, I figured it would be more efficient to ask first, then research, so that while I'm researching, I can refer to the opinions of my fellow forumites, and/or the mods.
Thanks again for any assistance offered.

Sort downloads by file name not type?

Wondering if anyone can help me here. I'm trying to either make a script or automator workflow that will sort my downloads by file name, not file type.
To cut to the point, I'd like say Reno 911, The Daily Show and the Colbert Report to go to a Comedy Central folder, My shows to go to my folder and my wife's to go to hers, just keep the downloads tidy as they come in instead of having to clean the downloads folder manually every day.
There a easy way to do this?

Why not have two separate user accounts - your's and your wife's. Then she can select her own download folder in Safari preferences, and you can select yours. Set up the folder to display in List View and click on the Name column as the sort column (twice for descending order.)

IN BW UCCHECK transaction for Unicode does not list Transfer/Update rules

Hi All,
We are going to update our BW system to install Enhancement Package 1 SP 7 on our BW 7.0 and we are going also to convert our data base to Unicode.
We used the UCCKECK Transaction to have a list of the abap programs to be modified before the u201Cconversionu201D procedure.
But the transaction does not list the abap code included into transfer rules, update rules and start routines.
Have you an idea to recover them?
And do you think the conversion procedure will abort if these kinds of routines are not adjusted or they will go in error at runtime?
Do you have experienced this problem?
Thanks a lot.
Antonella

Hi Nils, sorry for delay in replyu2026
Unfortunately we started to develop our routines in BW2.0 and checking some of them we receive the error u201CIn Unicode programs, the "-" character cannot appear in names, as it does here in the name "W-DATE" u201Du2026
And further more in subsequent BW releases the same error is only a u201Cwarningu201D into a NON Unicode system.
So I think we should check and correct all our routines before the Unicode conversion.
My best regards, Antonella

Frame names not listed

Similar Messages

Maybe you are looking for