Frame Offset Playback Control in FCP HD Not Working

if I output my audio via firewire, it works just fine. However, I am unable to playback audio in sync via built-in audio (which sounds far better than my firewire output device).
I've gone to to my FCP System Preferences; Playback Control and it has a default offset of 4 frames. But it's still out of sync. However, if I manually offset my audio in the timeline by 4 frames, it's IN sync. I've tried various frame rates in the Playback and it never syncs, in fact it appears as though nothing is changing, no matter what I set it at.
What am I overlooking or doing wrong? It just doesn't make sense.

I'm having the same problem on capture. I'm migrating from a PowerBook 800 to an Intel Imac. I need the Keyspan Serial to USB adapter to run the 422 port on my BetaCam player. I finally got it hooked up tonight.
I grabbed a piece of video, and I'm getting two error's. First, like you, I'm 4 frames off (I'm using a Window Dub so I see the offset). Secondly, when I stop the capture I get a window telling me there is some discrepancy with my captured audio rate. When I look at the setting for the clip, all the frame rates seem to match. When I check the video, the lip sync is indeed off.
So I'm using the same Keyspan adapter I've bee using using in Panther. Now I'm in Tiger, and I have what seems to be the latest, Intel Mac Keyspan update.
But when I type in an offset number. and hit return, it doesn't "take". There is no change on the offset if I do another capture, and when I go back to the setting, it is at zero. I remember in Panther the current offset number was always visible.
Any suggestions? I'm trying to get the offset to take, so I can capture proper time code on this BetaCam dub.
Thanks.
Powerbook G4 Mac OS X (10.3.9)

Similar Messages

The Control A key is not working. I cannot multi-select my songs. I'm not sure if it is the problem with iTunes 10.6.1.7 or my PC settings encounter issues. Also, i cannot find Album Artwork online using iTunes and i cannot select any view form but List.

The Control A key is not working. I cannot multi-select my songs. I'm not sure if it is the problem with iTunes 10.6.1.7 or my PC settings encounter issues. Also, i cannot find Album Artwork online using iTunes and i cannot select any view form but List.

The Control A key is not working. I cannot multi-select my songs. I'm not sure if it is the problem with iTunes 10.6.1.7 or my PC settings encounter issues. Also, i cannot find Album Artwork online using iTunes and i cannot select any view form but List.

Satellite M70: Control button keys are not working

I currently reformatted my M70 to WinXp Pro Sp2, downloaded all related TOSHIBA drivers and related programs [ie. Toshiba control button driver / program] and system is running normal. However, CONTROL BUTTON keys are not working, was working fine with XP Home edition and Win Media but when I called Toshiba Support they couldn't help me because I had upgraded to Xp Pro. My Question is...Is there a fix or a solution to this issue and where can I download or find this fix.
Thanks
Emm

Hey Folks
Thanks for the advice, however, I did download the control driver and the controls program for the M70 model AND installed them in that order. The Controls Driver installs correctly but unfortunately, when installing the Controls Program, I get a message that the program will not install because it's not the right version for my M70-CL3 [PSM73C]. Not sure what to do here. I would think that everything should work properly seeing as taking the step up to XPPro SP2 isn't that far of a stretch.

I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

I know what your'e going through, Gary.   OSX 10.6.7 is an absolute disaster.   Since I upgraded, I've had problems in FCP, Logic, Garageband, even issue dealing with peripheral hardware like external monitors.
Before 10.6.7 my system was running fine.
I've brought this up with Apple repeatedly.   They smile and shrug.   They've been helpful resolving the issues, but none of them has been easy to solve. I have spent days, dealing back and forth with tech support, sending logs, etc., before solutions have been found.
I wish I could give you an answer to your question.   My only guess is that Apple has totally dropped the ball on this one.   In the future they should provide a disclaimer when they offer an upgrade. Something like:   "Caution: all of your software may not function after this upgrade. But go ahead, you'll feel cool that your OS is the latest thing."
As someone who has been with Apple for close to 25 years, I'm disturbed by what appears to be an increasing sloppiness in their work.   This is especially disturbing when you depend upon their system to make your living.
Good luck.
david

ISR NATIVE CONTROLS ERP -2005 is not working in ECC 6.0, MSS 1.0 Version

Hi,
Does anybody knows, why the ISR Controls for ERP 2005 is not working properly. We utilized the DropDown List Controls, we binded to the correct field in the FORM. We have filled the ADDITIONAL_DATA table, on the SET_ADDITIONAL_VALUES method also, to populate .
The DropDown values are not populating in runtime.
We are running ECC 6 Version, Basis is on SP12, and Application Platform is on SP09. We have MSS 1.0 for SP 10.
What might be the problem, what do you feel about procedure in ISR Controls binding?
INFO: It doesn't have that SAP-VHLIST , illusion here.
Please guide me , as I am strucked from all ways, any note, patch to apply, any config issue.
thanks,
chitti babu

Hello,
In case of DDLB, apart from the binding, there's something else needs to be done.
Goto binding tab : incase adobe life cycle designer 7.1, a link "Specify item values" is highlighted.
$record.sap-vhlist.FIELDNAME\.DATA\.FIELD.item[*].
Item Text : text
Item Key :key.
This should resolve ths issue.
Hope this helps.
Best Regards,
Saujanya

Bursting control file for Printer not working in WINDOWS ENVIRONMENT

Hi,
We are trying to print xml publisher report output (PDF) using bursting control file. Is not wokring.
We are using ebs (R12.1.1) on Windows environment.
Any pre-requisite setup (ie. cups config) should be done before printing using control file. Please guide me i am not having knowledge in printer setup and printer part..
Thanks in advance
--Ben

Hi Hussein,
Yes, I am able to print seed concurrent report (o/p -text) to that printer (method:- giving the printer name and copies by clicking " Option " in SRS window.. )
When i do the same for xml publisher publisher report to the same printer , its not working using bursting control file.
I too made the test in xml publisher report without bursting control file , there i faced another new issue. Let me explain
1. We are using RDF as data source . here o/p :-" XML "
2. We are using RTF as layout. In template definition, i chose the default o/p type as :- "HTML"
3. When i submit the request, i choose the printer which is working fine for printing seeded report. (method:- giving the printer name and copies by clicking " Option " in SRS window.. )
4. My printer getting prints HTML tag, instead of desired o/p. I wondered after seeing the printout.
5. I cross checked by clicking view output, its showing me the exact html output as per RTF layout.
Dont know wat happening ??? Help me out.
i did the same for changing default output type in template definition to RTF,PDF.. its printing source code of the output type instead of printing output.
Thanks & Regards,
--Ben

Remote control and eject button not working?

Hey.
Not too much to explain - my remote control does not work at all, and neither does my cd eject button on the keypad. This is after the installation of Leopard.
I've tried to search for the issue but only find people complaining about the new Front Row design or how they cannot eject volumes at all. (Which is not my case)
Has some people had this error and fixed it?
Thanks in advance.

The remote control could be because I deactivated my IR receiver
That leaves my eject button.

FCP still not working in 10.4.8

So I am running 10.4.8 amd my FCP HD 4.5 will not open. All I get is a message that the application unexpectadly quit. I have tried to reinstall the program but it does not work. Any thoughts on what is going on. This all started when I installed 10.4.9. Any help would be greatly appreciated.

Try updating the prebinding
From Apple Knowledge base Article ID: 93984
Warning: This document describes how to enter commands in the Terminal application. Users unfamiliar with Terminal and UNIX-style environments should proceed with caution. The entry of incorrect commands may result in data loss and/or unusable system software.
1. Save any files or work you may have open, because you'll need to restart the computer after these steps.
2. Open Terminal (found at /Applications/Utilities/).
3a. In 10.3.9 or earlier Type: sudo update_prebinding -root / -force
3b. In 10.4.0 and later sudo update_prebinding -root / -force -debug
4. Press Return.
5. Enter your password when prompted.
6. The prebinding operation may take a few minutes. When it is complete, a new command-line prompt will appear. When this happens, please quit Terminal and restart your computer.
(Don't forget to Restart.)

FCP 7 not working with Mountain Lion!!

FCP 7 is not working!!
Once I install FCP in Mountain Lion (10.8) My FCP 7 won't let me open or create new projects shot with a Sony Z5 using Sony HVR-MRC1 to ingest media.
Prior to this I never had any problems with Snow Leopard.
When I try to ingest media FCP freezes and received the message that the application is not responding. For older works I am receiving this message:
Appreciate your help!!
Thanks,
Rolando

That error is well known and documented. Even if you are on The latest FCP 7.0.3 version, it can still appear.
Moving to FCP X won't help either. FCP 7 projects are not readable in X without third party conversion software.
FCP 7 should work fine in Mountain Lion (Mac OS X 10.8) I have it running in Mac OS X 10.10.2.
Use this free tool to trash FCP Preferences: http://www.digitalrebellion.com/prefman/ Doing so will return FCP to standard settings.
This tool is not free, but it has a trial period: http://www.digitalrebellion.com/promaintenance/ It includes the ability to repair corrupt project files.

Icloud Control Panel 3.1 not working in Windows 8.1/Outlook 2013

Every time I start the Icloud Control Panel, I get the message: "Repair the Icloud Control Panel to use Icloud with Outlook". I have Outlook 2013, and windows 8.1 pro 64 bit. Needles to say contacts are not being sincronyzed between Icloud and Outlook. Contacts and mail sinc does not work also in itunes.
Repairing the Icloud control panel does not solve the issue. If I say repair later, then this is what I get:
Any ideas?
Thank you.
Message was edited by: Barattolo_67
<Image Edited by Host>

Reinstalled Office 2013, reinstalled Icloud, and now all is working!

Beats earbud volume control on iPhone 5 not working

I have a pair of the Beats URBEATS ear buds. When I use them with my iPhone the volume controls do not work on the headphones not can I answer calls or skip songs. Anyone else having this problem and how do I fix it ?

I have the same problem with a first gen 8 gb touch running 2.1 software.
I've seen other threads referencing this problem but no real solutions. I've tried reseting the iPod (press/hold sleep/wake + Home buttons,) restoring via iTunes and adjusting the volume limit control with no success.
Is there anyone out there that can help us?
I was given the iPod touch as a gift and updated the software to 2.1 right out of the box via iTunes. How can a restore to the previous 1.x version? This seems like the only solution at this point.
Thanks

Parental controls - allow google does not work

I have set up a user account for my 11-year old son, with parental controls enabled, specifically blocking websites with adult content.
Unfortunately, it blocks just about everything, including netflix, facebook and google, so I manually allow these exceptions.
But it does not work. It still blocks Google, allows Facebook login screen but jumbles up the page when you log in, and will not allow videos from netflix.
I can't believe Apple would produce such an inflexible bunch of crap purporting to be Parental Controls, so what is wrong here?

Are you logging into the client using an account from the directory, or using an account on the client system itself?
The client account has priority over the directory account.
For example, if you have an account 'fabian' on the client and an account with the same name 'fabian' on the server (with parental controls enabled), then the client account is the one that will be used and the parental controls won't be used.
You'd need to use different account names (or remove the accounts off the client system) to force users to login with the directory account.

Premiere Markers export and import: Roundtrip via FCP XML not working

The objective of my project is to create a sports app that records markers and saves it in different formats of XML / CSV that I can then import in different NLE packages.
I have already succeeded with Vegas Pro but also want to support NLEs for MAC-OS.
In order to approach this analytically I have exported a very simple project with 1 sequence including 1 clip and 3 markers (with length zero and length > 0) and exported it
in FCP XML from Adobe Premiere CC and do a round-trip import it via FCP import into Adobe Premiere CC.
This round-trip does not work. Any insight why or any support what other mechanism will work?
Thanks
Thomas

let's go back to the purpose:
I have written a mobile app on which people can during a sports match capture the time of the important moments by pressing buttons.
I then convert the time information into an XML or CSV file that can be read by the different NLE. Given that Sony Vegas allows to import
markers independently from a sequence. Now I look at the same things for Premiere. This allows to edit the highlights very quickly vs watching
the entire match coverage again.
I try to replicate that on Premiere through the FCP XML, but now that the roundtrip works, the issue is that FCP XML in its structure wants a sequence.
I could imagine to provide a dummy sequence that can be overlayed by the real content just to preserve the markers. Any ideas?
Regards,
TK

Tab Order under Control Properties - Display Tab not working

At present I'm trying to order a couple of Input-Fields and Checkboxes for the Tab-Key. Therefor I tried to use the "Tab Order" Property in the Control Properties - Display Tab - Section: Layout - Tab Order.
In the SAP Library this property is described that way:
When user tabs through the controls of the component in runtime, the number indicating what place this control has in the tab order. Note that -1 removes the control from the tab order entirely and 0 indicates that it is highlighted according to its appearance in the component
Source: [Help.sap|http://help.sap.com/saphelp_nw70/helpdata/en/42/c2ba7f545e3116e10000000a1553f7/frameset.htm]
The problem now is that VC is completely ignoring this property and just using the tab order in the way the (Input-) fields where created.
At present I don't see any opportunity to give my "Form view" any logical tab order.
Is there any workaround? Is it a bug? Is there something I'm doing wrong?
Thanks for your help in advance.

Hi,
It seems that this tab order works only for few of the controls like pushbutton, radio button, checkbox, toggle button...
i too tried this in my model but it was not working for the input fields of other types.
regarding -1 -2 ... these values work normally as per their values here -1 -2 order functions just like 2 1.
hope this helps you.
Regards,
Rk.

Data-control-scope=shared is not working

Steve Muench said in January 2010 in that post {thread:id=1012099}
"In order to share the connection/transaction when data-control-scope=shared, today as an implementation detail we do AM nesting for you at runtime when using task flow calls”
From that thread I understood that: by setting *"data-control-scope"* to *"shared"* +(this is the default in 11.1.1.3.0)+ in _task flow definition file_ +(in behavior section)+, it should make the task-flow using the same database connection than the _parent’s application module_.
*Is that true?*
If so, it is not working for me.
<li>I’ve created 2 _independents_ ADF Fusion Applications : *MyMainApp* and *MyTFlow* </li>
<li>Each application has a Model and a ViewController projects.</li>
<li>Each application has one ViewObject and one Application Module.</li>
<li>MyMainApp/Model contains MyMainService Application Module & AllEmployeesView ViewObject </li>
<li>MyTFlow/Model contains MyTFlowService Application Module & AllDepartmentView ViewObject</li>
<li>MyMainService and MyTFlowService have the same JDBC Datasource (jdbc/GCCDS).</li>
<li>_In MyTFlow/ViewController project_</li>
<li>I’ve created one page fragment and dragged & dropped AllDepartmentView as an ADF Read-Only Table</li>
<li>I’ve created one Task Flow (allDept-task-flow-definition) and added the pageFragment onto it.</li>
<li>I’ve set the “data-control-scope” to “shared” (it was the default) </li>
<li>I’ve created a new deployment profile (ADF Library Jar) and deployed the jar file </li>
<li>_In MyMainApp/ViewController project_</li>
<li>I’ve created a JSF Page (home.jspx)</li>
<li>I’ve dragged & dropped AllEmployeesView as an ADF Read-Only Form. </li>
<li>I’ve dragged & dropped the “allDept-task-flow-definition” from “Resource Palette” onto the JSF Page. It automatically put it inside an af:region and imports the jar file to the Libraries (ADF Library)</li>
<li>I run the home.jspx page. It works fine but with *2 database connections!*</li>
I think I’ve missed something.
Best Regards
Nicolas

Hi,
the problem is that the Application Modules are root modules and therefore open a new database connection. Only nested application modules reuse the connection of the parent AM. Andrejus Baranovski did blog about this and came up with the suggestion to build reusable projects such that the model and the view controller parts are deployed separately into ADF Libraries and then combined in a super ADF Librery. This way you can use nested application modules (a single datase connection)
http://andrejusb.blogspot.com/2010/10/how-to-reduce-database-connections-and.html
http://andrejusb.blogspot.com/2010/06/adf-regions-and-nested-application.html
Note that IMO the real power of shared Data Controls comes when you use ADF Regions in an application as a mean of modularization.
Frank

Frame Offset Playback Control in FCP HD Not Working

Similar Messages

Maybe you are looking for