Frame snapping on composition frame rate change.

Hello
Just had a thought today for a feature request....
It would be nice if when you brought up comp settings to have a switch to snap keyframes to the nearest whole frame when changing the comp frame rate i.e. from 30fps to 25fps.
Also curious to know if the missing frame for sequences nag is ever going to be fixed in CS6?

It would be the same one mentioned here.  Can't remember if it happens in CC, think it was fixed.
http://forums.adobe.com/message/4568071
Edit, after reading that thread a little further it was fixed in CC but not CS6.

Similar Messages

  • Reconnecting media after frame rate change

    Shane Ross wrote a reply ( see below )  to a person that had the same problem as I am now.
    I shot with HVX200 using the Firestore that converted footage to 59.94. Then, mid-project I shot with the P2 which shot at 24. I now have 2 diff. frame rates
    I tested some clips in Compressor comverting the 24 to 59.94.
    Using FCP Studio 2 , I was unable to reconnect the media without the in/out points being off with varying degrees.  Doing an entire re-edit will be painful.
    QUESTION : Do I really have to convert the 24 to 59.94? Would it significantly affect output?
    The codec is the same for all footage.  ( DVC PRO HD 720P. )
    THANKS!
    [elizabeth charles] "My question is, is there anyway to change the files in my timeline to the conformed files without having to begin my editing again?"
    Nope. 
    You did a bad thing.  Editing, finishing, then changing the frame rate of your masters.  FCP cannot reconnect to media with differing frame rates.  Because the duration of the footage is different, and the frame rate is different. The footage has the same amount of frames..., but now they play at a different frame rate, so the duration is different. You'll have to re-edit with the new masters.
    But...RECONFORM...that changes the frame rate, as well as the speed in which they play.  30fps conformed to 24fps will play in slight slow motion.  If you want the footage to play at a different frame rate, but the same speed...normal speed...you need to use Compressor.
    Shane

    gang allows you to lock the viewer and canvas together so when you move one, the other moves the same amount.  To match back your footage, you find a frame with a clear difference from the previous frame, for example when someone blinks.  You then find the blink on the new source file in the viewer and then turn on the gang function It's the center thingamagic at the top of the canvas.  You then jump around the shot in the canvas and make sure the movement in the viewer matches.  you then find the in in the canvas and mark an in in the viewer, etc and replace the shot.  If this isn't clear post back.
    In compressor in the frame controls panel, you enable frame controls and set the rate conversion to best.

  • Frame Rate change when importing video into FCP 5

    I am importing an HD h264 file into FCP 5. The video when opened in QT shows that it's frame rate is 30fps, what I exported it at. When I Import the file into FCP 5 it changes the frame rate to 29.97fps, which is causing major video/audio syncing issues. Any thoughts on how to stop the frame rate change when importing? I tried changing my system settings and audio/video settings before the import to match the file and it is still picking it up at 29.97, major headache especially since I'm cutting industrial.

    yeah I'm kinda limited, working with video for the web and I'm making revisions as to what has been already posted. The H264s are the originals per say as we are using a screen capturing program to obtain the video, I could re export the originals at a truer format, but with the resources I'm given, its not truly the option I can afford to take. I've found a workaround through using imovie of all things, but I rather be in FCP. I've done some editing with h264s before and this is the first time I've seen this happen, it kind of reminds me of when I had an editor a few years back digitize video that was drop frame as non-drop.

  • Frame delay set in frame animation changes after conversion to video timeline?

    hi everyone, i'm running photoshop cc on windows 7.
    i was trying to make a gif today and went about it the way i usually do - import video frames to layers (1 layer/frame of video), cut out the frames i don't want, then convert from frame animation to video timeline in order to apply filters. in this particular project i had set all frames to a delay of .04s, but when i converted to video timeline the gif seemed to run faster than it had in frame animation. i converted back to frame animation, and for some reason the delay had been changed to .03s - which i'm assuming accounts for the increase in gif speed. i tried inputting different values for frame delay, but they seem to all round to either .03s, .07s, or one of the preset values that appear when you click the dropdown box.
    this has never happened to me before. in fact i opened a gif i made recently that had a delay of .05s and once opened the delay had been changed to .07s - noticeably slower than the original gif (which i had opened in IE to compare). i have restarted pscc multiple times to no avail. in fact i just noticed that the "make frames from layers" tool is malfunctioning as well, instead of making one frame per layer, the frames are either blank or they all show the top layer.
    is this something that has happened to anyone else? if so, how to fix it? it's very frustrating because i need to be able to convert to video timeline for filters and to add text, which i can't do in frame animation.

    Did you ever find a solution to this problem? I'm having this exact issue. I notice that the frame delay only stays the same if I set it to .1, but all other delays are changed to .03 or .07. It's a pain because I have to open every saved gif & change it to the correct time delay. It's so time consuming.

  • TC rate changing on round trip

    I am sending an aiff audio file to STP from FCP. When I finishing processing the clip and save it and go back to my timeline in FCP, the TC rate has somehow gone to 30 instead of 25. (I am woking in PAL). I noticed because the audio waveform pattern on the clip does not corrispond to the actual audio. This did not occur in the older version of STP. Any ideas? My prefs in STP are all set to 25.

    I'm beginning to isolate the problem. Your post in fact gave me other ideas and tests to run to try to hone in on the issue. The audio being sent to STP was a translation so only an aiff audio file. The frequency being 48Khz every step of the way. Out of curiosity I sent a clip that I had digtized from digibeta (10 bit uncompressed with 48 KHz audio) to STP roundtripping as with the audio only clip and it was fine. No problem at all - no change in TC rates. So... I tried with a clip of music downloaded from a professional music library site (wav, 48KHz). I dropped the music onto the timeline and roundtripped thhrough STP. Same Frame rate change as before and green render line up top. Frequency stays constant at 48KHz. So the problem is occuring on audio only clips.
    And it is happening only since I upgraded. I went back to a December project with the same types of files which had been round tripped and they are file. I opened them in STP, saved the file and back in FCP the green render line is back and Frame rate is changed.
    So there is obviously something that STP is doing to those files automatically.

  • How can we get the reference of XML element on frame as soon as frame is created in Document?

    Hi,
    When ever we copy any text/table cells from any frame, and paste it directly on page, A new Frame is created and the pasted text is placed inside that frame.
    Now to capture this frame creation, We have two possible solutions:
    1) Attach Observer on Document 'kDocBoss' on IID_IHIERARCHY_DOCUMENT and it will notify on frame creation in update function.
    2) Notification event on new story creation.
    Now, I need to perform some changes in the newly created table, for example:
    a)  Need to delete XML tags from newly created frame
    b)  Need to perform action on table cells if any in the created frame.
    But the problem is, when the event comes, I can access basic properties of frame like it's name, type etc, but it does not give me the
    XML element on frame or tables in frame until the event is com pleat.
    I know it's quite a specif requirement, but I guess many of you might have faced these kind of challenges, while processing the event.
    Does any one has any idea how I can get the reference of XML element on frame as soon as it is created?

    Hi Kapoor,
    please give also others a chance, and excuse that I get up late on vacation ;-)
    Anyway, I'd keep the story creation responder to recognize the copy, then combine it with an observer on the backing xml story to catch the associated XML element which is created there. Something like below:
    UIDRef xmlStoryRef = Utils<IXMLUtils>()->GetBackingStore(doc);
    InterfacePtr<ISubject> subject ( xmlStoryRef,IID_ISUBJECT );
    subject->AttachObserver(observer,IID_IIDXMLELEMENT,observer->GetAttachIID());

  • Which media server protocols enable frame accurate seeking and frame stepping in players?

    Hi,
    ... and thank you in advance for taking the time to respond. I am evaluating different protocls for different client platforms, and I'd like to know the following...
    Which media server protocols enable frame accurate seeking and frame stepping in players? (It appears that RTMP does. However, what about HDS? What about HLS?)
    Why is it that some do and some don't? (Intuitively, this would seem to be more an issue of the player than the protocol, but then maybe it has something to do with the buffers and the specific information passed to the client.)
    For those protocols that do support frame accurate seeking and frame stepping in players, does the addition of Access DRM protection have any effect? (Intuitively, I would say no, but then maybe there are configuration changes needed in AMS to make it work.)
    Thanks!

    I searched for a DVD player with a jog shuttle -- and you're right. They're all but impossible to find! I havent' found one made in the past 5 years!
    I don't know of any way you could accomplish the same thing with software either.
    Most DVD players have slow-motion and frame-by-frame features. (Even my cheap $40 Toshiba.) That may be the closest to it.

  • Drop Frame and Non Drop Frame

    Does QuickTime Pro 7 allow you to select between drop frame and non-drop frame?

    I don't understand your question.
    QuickTime Player will automatically reduce the implied frame rate to maintain the file playing. You can observe this by viewing any HD movie trailer on a non supported OS.
    Frame rate drops so much that the file is nearly not viewable yet the audio portion continues to play back without issue.
    The QuickTime author can't set these parameters and QuickTime Pro users can override the issue by selecting to "Play All Frames". This can quickly bring playback to its knees on older systems but it will not drop any frame during playback. It may take two days to view each frame of a 1080 HD movie trailer on a G3 but you should see each one.

  • Drop Frame or Non Drop Frame in HDV format

    Hello folks,
    I am still learning all new things about HDV, so I am wondering what is the correct frame setting when shooting in HDV. In DV I have always used drop frame, because 29.89 frame rate. But what about HDV? Is that the same idea, or is the frame rate different? And how does FCP recognize this?
    Thank You,
    K.

    It doesn't matter. Shooting DF or NDF doesn't matter. The frame rate is the same, just the way the frames are counted is different:
    http://www.csif.org/html/dropframe.html
    This doesn't really matter when shooting, AFIAK.
    Shane

  • Addressing the Frame in an extended Frame

    I wrote some nice code bringing my Frame to the Exlusive Fullscreen Mode. Since I want to put all the methods like "renderSprite" or "showBuffer" into on package, I tried the following:
    public class ExclFrame extends Frame implements MouseListener, MouseMotionListener, MouseWheelListener
    /* All kinds of variables and functions*/
         public ExclFrame(GraphicsConfiguration graphConf)
              gc = graphConf;
              addMouseListener(this);
              addMouseWheelListener(this);
              this.createBufferStrategy(2);            /* Evil line */
              BufferStrategy bufferStrategy = getBufferStrategy();
    }When I try to let that run, it tells me that in the /*Evil line*/ I need a valid peer. It worked fine, as long as I used a plain Frame and had frame.createBufferStrategy(2);. After changing it to that package, I don't know how to "address the Frame" of my extended Frame. Shouldn't be that problematic, I guess...
    Many thanks in advance,
    G :-)

    well, you can call show on super, if that's where you want it, or you can call show on "this", cuz if you haven't overridden show it'll call it on the super class anyway... Just be careful with that if you end up overriding the show method on your own later for something. Don't know about the undecorated thing... although I don't think that has any use whatsoever in full-screen mode anyway.

  • Costing Sheet Overhead Rate Change Mid Month

    Does SAP Support a mid month overhead rate change in a costing sheet?  I have an overhead rate change effective 5/12/2007, but my PM Order is not recognizing the change unless the Basic Start Date of the order is 6/1/2007.

    hi
    it will not support mid month overhead. it should be either period basis or yearly basis.
    regards,
    siva

  • How do I go directly from one frame to another particular frame which is far away in the time line? (e.g the two frames are separated by 100 frames)

    How do I go directly from one frame to another particular frame which is far away in the time line? (e.g the two frames are separated by 100 frames). I mean, is it possible to take the playhead from one frame to another frame directly which is 100 frames away in the time line? Thanks for any reply.

    In the Timeline, go to the first frame and press M to put a marker on it. Go to the other frame you want to jump to and put a marker on that one too.
    Now press Ctrl+Semicolon to go to the previous marker - or Ctrl+Comma to go to the next marker.
    Andy

  • Passing data from a panel to a frame / disposing of a frame from in a panel

    Hello, I have recently created a program where all windows are made of seperate frames, now, to make the whole thing a bit more appealing and professional looking, i'd like to make 1 main frame, and load my content panels into this 1 frame. Problem i'm having with this is passing data from the loaded in panel to the main frame, so the main frame can hide one panel to load another with data inserted in the first panel. OR another solution to my problem would be a way to dispose of a frame, but from within the seperate panel class. I have searched the www for a solution, but haven't found one so far, so, any suggestions or references to some info about this kind of issue? Any pointer is greatly appreciated

    kennethdm wrote:
    EDIT: I took a look at the cardlayout, and, although i see its relevance to my question, it still leaves me with the question how exactly i will pass data the user inputs into the first panel, to the second panel. The second panel is built by the info which is provided in the first panel.Stop thinking of them as Panels and start thinking of them as OOP objects that have data that must be shared. It's often a matter of using getters and setters and sometimes requiring a sprinkling of the Observer design pattern.

  • How UBR/UNR will be balance in GL in case of xchg rate change?

    Hello Experts,
    I am in position where customer has accrue revenue in INR which is funded in USD with exchange rate A but now after a month when customer invoiced it, exchange rate has change to A+2. because of this UBR a/c got imbalance of A-(A+2) = 2 then how a/c UBR will get balance?
    example - @ time of Revenue -on 1-May-12 USD-INR rate was 50 Rs - so revenue was - 2$ = 100 rs/- INR - UBR -Dr = 100 Rs
    @ time of Invoice -on 2-Jun-12 USD-INR rate change to 52 - so invoice was 2$ = 104 rs/- INR - UBR- Cr = 104 Rs
    How in this case UBR get balance?
    Plz help...............
    Thanks
    :-)

    Hi Devesh,
    Thanks for the inputs you share. I have gone through the link and found that it is still under development.
    but another thought process suggest that in General Ledger module, if you run the revaluation process then will it be balances UBR/UNR accounts?
    The concept of revaluation in GL is to add the difference of amount as realized gain or loss..rght?
    Plz confim my understanding..
    Thanks
    :-)

  • Purchase order rate change after creation of gr.

    In t- code ME22N PO line item Rate change is possible after creation of GR against that line item.
    We want to restrict the po line item rate change after creation of goods receipt against that line item.
    Please suggest.

    solution 1 : Do not give authorization for ME22
    solution 2 : Grey out price chage , it should only be possible thru info records, and give authorization of info records in secured hands.
    You should not totally restrict price change after GR because there are possibilities that you might require to change rate after goods receipt also. In that case you have to change rate and then have to give restrospective effect to GR.
    try above 2 solutions which are simple

Maybe you are looking for