Frame to PDF font conversion broken in upgrade to Frame 10

I am using Adobe Garamond Pro font as body text. In Frame 9, this worked fine, I was able to generate PDFs with correct text. Now I have upgraded to Frame 10. I generate the same file as PDF, and the body text looks good except for passages that have been marked as bold text.
Again, fine when the PDF was generated by Frame 9, but now the bold text is not correctly rendered. Instead, I get an ugly monospaced, and very jammed-together, word. Non bold text looks okay. Italic text looks okay. But the bold text does not.
Any suggestions as to how can I fix this? I looked in the Frame10 fminit\fonts directory, and AGaramondPro-Bold.otf is there. In fact, the directory looks pretty much the same as the Frame9 version.

Okay, thanks. I think I have the problem solved, though I'm still not quite certain how it occurred.
To trouble shoot the Frame 10 problem, I opened up a file in Frame 9 (didn't uninstall it when I upgraded to 10, so I have both installed) and saved as PDF, with the same results, but with an error message that pointed me to the Adobe PDF printer, even though I don't explicitly point to it anywhere. The message said to de-select the option that says "use system fonts only" in the printer properties dialog.
When I did so, the problem went away.
Thing is, I never intentionally changed any of the Adobe PDF printer properties. It was working fine in both 9.0 and 10.0 Frame then all of a sudden the problem appeared out of the blue.
The only thing I can think of that changed between the time it worked and the time it failed is an upgrade from Acrobat to Acrobat X.

Similar Messages

Missing Characters in Frame Generated PDFs

I had an odd thing happen, that I thought I'd pass on. I was working on
my Mac to generate some statistical output. I printed out the results to
pdf, imported the results in to a Frame 8 document as a referenced
graphic. I then saved as a PDF with all fonts embedded. When viewing the
resulting pdf, two of the statistical charts had missing characters.
They just were not there. The two pdfs had been generated (accidentally)
using the smallest pdf file setting in Distiller 9. The other
problem-free charts had with all the fonts embedded made it through the
workflow perfectly. Regenerating the charts as pdfs with all fonts
embedded cured the problem with the final pdf.
Who would have thought that pdfs with non-embedded fonts would have
caused a problem down the line?
...Mike

Mike,
It's the same issue as with EPS with non-embedded fonts. FM's PDF
importing routine converts the PDF to an EPS for internal use, so
you're getting a PDF > EPS > PDF conversion taking place in the
workflow. Drop a font and something goes awry.

PDF launched in/out of CHM window frame

Hi,
I have a couple of .chms developed with RH 7. In these, I have a couple of merged CHMs that contain topics whose only function is to launch a PDF file.
The HTML/JS code that does this is below. It is not clear to me that this code has anything to do with what I am seeing. I don't know where the script came from. If there is a better way, please share it!
My prefererence is to have the PDF launched within the CHM's window frame. And it does do this, but only when the CHM is launched by another program. So if you view the "primary layout" from withing RH and select the topic, the .pdf opens up right in the frame.   This is also the case if the .chm is launched from our application executable using HTMLHelp() from the Windows SDK.
But, if you click on the .CHM file and open it directly from windows, when you select the topic that maps to the .PDF, the .PDF is opened in an independent launch of Adobe Reader, not in the .CHM frame.
Does anyone know why this works this way, and if there is a way to correct it? I would like the operator to be able to open the .CHM directly and still have the .PDF displayed within that frame.
Thanks.
Suzanne.
Here is the HTML code that launches the .PDF:
<html><head>
<meta stuff blah blah blah...>
<title>External PDF</title>
<script LANGUAGE=JavaScript TYPE="text/javascript" src="SomeScripts.js"></script>
</head>
<body onLoad="parser('../FolderName/Filename.pdf')">
<h1 style="font-family: Arial, sans-serif;">External PDF</h1>
<p> </p>
</body>
</html>
Here is the script:
function parser(fn)
var X, Y, sl, a, ra, link;
ra = /:/;
a = location.href.search(ra);
if (a == 2)
X = 14;
else
X = 7;
sl = "\\";
Y = location.href.lastIndexOf(sl) + 1;
link = 'file:///' + location.href.substring(X, Y) + fn;
location.href = link;

The only other (still similar) method is to touch at the bottom of the active screen and drag SLOWLY up to place it in the corner, it will slow down the animation some, but still basically the same.
Otherwise, there is not a way to disable that.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Bursting Program PDF Fonts different from Report Program PDF

We have designed a new XML Publisher report which uses bursting mecahnism to send out the output pdf to supplier. The report rdf completes successfully and generates the pdf with right fonts (Font Mapping configured in XML Publisher Administrator). AfterReport trigger of this report triggers the bursting program. This program sends out the pdf to the right recepients. But this pdf that comes through mail has different fonts then what it was in the output of first program. Can some one guide on how to get the same pdf fonts through bursting email file that is similar to the one that was generated through Report Program. Any help will be highly appreciated.
Thanks,
Mohammadi

Anyone who can throw light on this?
Thx

Font conversion of symbols

Before purchasing I would like to know how the font conversion works and if there are further settings once purchased. In my free trial I converted a simple music chord chart (lyrics and chords only, not notation) and though it did a fair job of conversion, the flat signs were missing. I do have notation fonts installed on my PC and need to know if this can be set to recognize upon conversion or not. This would be my primary reason for even purchasing the converter being a worship leader and needing the flexibility to alter charts, etc.
Here is a sample of what it converted, though missing the flat sign after the 'E's: etc. (the cut/paste misaligned some placement, otherwise that wasn't too bad after conversion)
Through It All
Words and Music by Andrae Crouch
Verse 1
E
Key -E
I've had many tears and sorrows
E maj7
I've had questions for tomorrow
E 7
There've been times I didn't know right from wrong
0 9                                       E                   C7
But in ev'ry situation God gave blessed conso-lation
Fm                   8 7                      E    Fm7    8 7
That my trials come to only make me strong
Chorus
E              E 7     A              Fm
Through it all       through it all
B                   Cm/B    8 7
I've learned to trust   in       Jesus
E          Cm7 8 7 E I've learned to trust          in God
E              E 7     A              Fm
Through it all       through it all
F7       B
Cm/B    8 7
E   A /E
E
I've learned
to de   -   pend    upon
His word

Could you try disabling the 'Recognize Text' function and converting your document again? I've seen mixed results in the past with converting guitar tab pages. This has helped in some cases.
-David

10.6.8 combo & 10.6.7 pdf fonts problem

Does the 10.6.8 update combo correct the pdf fonts problem that was inherent to 10.6.7? After a couple days of stress I had to do the lengthy 10.6.7 uninstall process in order to refine my doctoral dissertation. This has made me gun-shy & fearful of updates. Is it safe to update now?

The combo should fix your problem. As always have a back-up in case you have to revert.
The Font update came out to fix the problem in 10.6.7
http://support.apple.com/kb/DL1377
It should be rolled into the Combo-Update:
http://support.apple.com/kb/DL1399

PDF font problem on Solaris (Reports9i)

Hi.
We are recently moving our application from 9ias Release 1 to 9ias Relese 2. After several configuration problems I was managet to get most of it to running, but encountered big problem with Reports. In Reports6i we used font aliasing, and included several modified fonts with AcrobatReader3. With AcrobatReader5 it's not posible because of more strict checking of PDF standard.
Then of course with Reports9i we start using PDF font subsetting. After added several ttf's (Arial, Courier New, Times New Roman) it started working fine with one exception. Report created with plain Courier New 10pts is not subsetted - in pdf i receive fixed-bold 12 pts.
It happening only with this one size of font. Courier New with size 10 pts and bold or italic looks good. When I change size to 9 or 11 pts - it's ok. I've checked if fonts existed in Xserver - they are.
I double checked uifont.ali - it's ok. I've temporarily solved the problem by changing font in builder on Windows from Courier New to Courier (same size), and then everything works ok. Of course it might be solving - but for the amount of work (about 200 reports) I'm looking for more 'normal' solution.
Any ideas?
Reports server working on Sun Sparc Solaris 5.8, 9ias Release 2 (Patch 2).
Builder works on WindowsXP, 9ids Release 2 (Patch2).
Czesiek.

Reports 6 or Reports 9? Note that Reports 6 does not generate
syntactically correct RTF for Unicode characters.
We've been running with a postprocessor to correct the RTF and
to change the Oracle-set font to Arial; I'll be watching to see if
there's a better way since our postprocessor shouldn't be needed.
-- allan

Adobe Reader 9.4.2 SIGSEGV in command-line PDF- PS conversion

NOTE: This issue was originally reported Oct. 5, 2010, against Reader 9.4.0: http://forums.adobe.com/message/3186827
The following should emit PostScript on stdout:
     acroread -toPostScript < PDF_FILE
Try doing this with Adobe Reader 9.4.2, and all you'll see is
     Segmentation fault
Adobe Reader 9.3.4 works just fine doing such PDF->PostScript conversions.
John

Forgot to mention: this is occurs on both 32-bit and 64-bit RHEL5 Linux hosts at our site.
Tail end of an strace for this issue:
24100 munmap(0xf702f000, 4096)          = 0
24100 stat64("/u/j/o/john/.adobe", {st_mode=S_IFDIR|0700, st_size=2048, ...}) = 0
24100 stat64("/u/j/o/john/.adobe/Acrobat", {st_mode=S_IFDIR|0750, st_size=2048, ...}) = 0
24100 stat64("/u/j/o/john/.adobe/Acrobat/9.0", {st_mode=S_IFDIR|0750, st_size=2048, ...}) = 0
24100 stat64("/u/j/o/john/.adobe/Acrobat/9.0/Temp", {st_mode=S_IFDIR|0750, st_size=2048, ...}) = 0
24100 open("/u/j/o/john/.adobe/Acrobat/9.0/Temp/AdobeTempPShUseaq", O_RDWR|O_CREAT|O_EXCL, 0600) = 4
24100 close(4)                          = 0
24100 unlink("/u/j/o/john/.adobe/Acrobat/9.0/Temp/AdobeTempPShUseaq") = 0
24100 open("/u/j/o/john/.adobe/Acrobat/9.0/Temp/AdobeTempPShUseaq", O_RDWR|O_CREAT|O_TRUNC, 0666) = 4
24100 getcwd("/tmp/acrotest"..., 1024) = 14
24100 open("/u/j/o/john/.adobe/Acrobat/9.0/Temp/AdobeTempPShUseaq", O_RDONLY) = 5
24100 --- SIGSEGV (Segmentation fault) @ 0 (0) ---
24100 +++ killed by SIGSEGV +++
John

Adobe Reader 9.4.0 SIGSEGV in command-line PDF- PS conversion

The following should emit PostScript on stdout:
     acroread -toPostScript < PDF_FILE
Try doing this with Adobe Reader 9.4.0, and all you'll see is
     Segmentation fault
Adobe Reader 9.3.4 works just fine doing such PDF->PostScript conversions. Will it be another 3 months before this is fixed?
John

Forgot to mention: this is occurs on both 32-bit and 64-bit RHEL5 Linux hosts at our site.
Tail end of an strace for this issue:
24100 munmap(0xf702f000, 4096)          = 0
24100 stat64("/u/j/o/john/.adobe", {st_mode=S_IFDIR|0700, st_size=2048, ...}) = 0
24100 stat64("/u/j/o/john/.adobe/Acrobat", {st_mode=S_IFDIR|0750, st_size=2048, ...}) = 0
24100 stat64("/u/j/o/john/.adobe/Acrobat/9.0", {st_mode=S_IFDIR|0750, st_size=2048, ...}) = 0
24100 stat64("/u/j/o/john/.adobe/Acrobat/9.0/Temp", {st_mode=S_IFDIR|0750, st_size=2048, ...}) = 0
24100 open("/u/j/o/john/.adobe/Acrobat/9.0/Temp/AdobeTempPShUseaq", O_RDWR|O_CREAT|O_EXCL, 0600) = 4
24100 close(4)                          = 0
24100 unlink("/u/j/o/john/.adobe/Acrobat/9.0/Temp/AdobeTempPShUseaq") = 0
24100 open("/u/j/o/john/.adobe/Acrobat/9.0/Temp/AdobeTempPShUseaq", O_RDWR|O_CREAT|O_TRUNC, 0666) = 4
24100 getcwd("/tmp/acrotest"..., 1024) = 14
24100 open("/u/j/o/john/.adobe/Acrobat/9.0/Temp/AdobeTempPShUseaq", O_RDONLY) = 5
24100 --- SIGSEGV (Segmentation fault) @ 0 (0) ---
24100 +++ killed by SIGSEGV +++
John

Name Exported PDFs with a filename generated from text frame on page

Does anyone have an idea how to do the following? We are on InDesign CS5 on a Mac running OSX 10.6
We are plan on creating a document of say 100 pages. On each page will be a photo of a product and some text frames. In one of the frames will be the product's SKU code - which we will enter manually.
What I want is that we can then export each page as a separate PDF and the filename of each PDF will be taken from the SKU code present in the text frame with .pdf appended.
Has anyone done something like this?
Thanks

Ask in the Scripting forum... InDesign Scripting

Create a pdf font catalog

Hello,
anyone know is there a freeware that can create a pdf font catalog?
I use theTypeBook to create printed font catalog for all the fonts but takes a lot of space,
now would like to recreate it in pdf format but don't want to scan them all.
Thank you

Hi, B_L. Create your catalog in TypeBook, then choose Print, and in the Print dialog box, click the Save as PDF button.

Hi, on the link below, I need to open the "demande de visa de resident temporaire" but once I click on it it gives me the following message: " To view the full contents of this document, you need a later version of the PDF viewer. You can upgrade to the

hi, on the link below, I need to open the "demande de visa de resident temporaire" but once I click on it it gives me the following message: " To view the full contents of this document, you need a later version of the PDF viewer. You can upgrade to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html For further support, go to www.adobe.com/support/products/acrreader.html".
the link is: http://www.cic.gc.ca/francais/information/demandes/visa.asp?countrySelect=RO#applications
can someone please help me? I've tried installing everything as per the indication in the message but I still get that error message.

update your adobe reader here, http://get.adobe.com/reader/
untick unwanted tag-along ware.

Love Acrobat XI, but when I installed it became the default program to open all my photos. I'd like them to open in theirr native (JPEG, etc. format) How do I disable the PDF default conversion ? Cant' find anything in Preferences that works.

Love Acrobat XI, but when I installed it became the default program to open all my photos. I'd like them to open in theirr native (JPEG, etc. format) How do I disable the PDF default conversion ? Cant' find anything in Preferences that works.

Sounds like a file association issue in Windows. Right click on the files of interest and select Open With>Choose Default Program and select the program you want used (be sure the "always use" box is checked. The Acrobat installation should not have done this change, but this is the process to make the change on each file type.

V9.0.1 TG4RDB & TG4RMS .pdf documents are broken

The Transparent Gateway for Rdb and RMS .pdf files are broken. The link is located at;
http://otn.oracle.com/docs/products/gateways/content2.html
The files can be downloaded OK, but when the files are opened with the Acrobat reader,
it reports fixing a broken file, then opens the file. However, all the pages are blank.
The index is present, but there is no data!
Have tried other .pdf files from this page, and they open OK.
Please reply to [email protected]
thanks, Andrew (Support Analyst)

Same thing here with Keynote 4.01. Pictures will not display in Adobe Reader.
Preview will display fine. Adobe Photoshop CS3 will also show the pictures correctly. In Adobe Reader 6.0 everything is there, except the pictures. This is true for "exported" PDF's as well as "print as PDF"'s.

Pdf fonts problem in 10.6.7 - resolved in 10.6.8 combo update?

The pdf fonts problem in 10.6.7 forced me to go through the long uninstall process after a couple days stressing over what the problem was -- it was Adobe tech support that finally informed me what the problem was. Is the problem fixed in the 10.6.8 combo update? Since I got no replies when I asked this question a different way yesterday, can anyone say (for helpful answer points) whether Apple would be inclined to answer this question if I just call them up (i.e., without existing AppleCare)? Any other suggestions for getting official support on this question? As it stands, I fear updating at all, and could be stuck with 10.6.6 for a long time.

The combo should fix your problem. As always have a back-up in case you have to revert.
The Font update came out to fix the problem in 10.6.7
http://support.apple.com/kb/DL1377
It should be rolled into the Combo-Update:
http://support.apple.com/kb/DL1399

Frame to PDF font conversion broken in upgrade to Frame 10

Similar Messages

Maybe you are looking for