Framed photos in booklet disappear when Pages prints!

I am attempting to have a printshop run a booklet from a Pages 08 file I created. Whenever they print (on any machine) the photos that are framed disappear. The frames themselves (of the ragged-edged, bent and shadowed variety) do print, but the picture itself will not, even though clearly visible in the PDF. The shop installed Pages and ran the job (thinking that the PDF might be the culprit). Same problem occurred. Can anyone suggest why, and how to overcome the problem (other than simply removing the frame)? Thanks so much.

I have the similar problem. I created a document and exported it to PDF thinking that I could print it on a plotter connected to Windows PC in my office. However the framed photos don't appear in the PDF when printed (and even viewed). I went back to my Mac and check the file, and found something real strange — the PDF document looks perfectly normal if I opened it using Preview, but have the missing photo when opened with Adobe Acrobat Reader...
I don't know what's wrong with the exporting, apparently the exporting works fine, perhaps something is missing from Adobe Acrobat Reader? (I had some error message telling me that some "frame was missing" when I opened the file with Acrobat Reader.)

Similar Messages

  • Iphone camera effects display in photo album but disappear when you open the photo itself. why is this ?

    iphone camera effects display in photo album but disappear when you open the photo itself. why is this ?

    Hi Cyclosaurus,
    Thank you for your reply. Sorry to bug you again but can I ask some further questions? Pls excuse my lack of knowledge on these things.
    In relation to your points:
    1) In the ftp publishing settings, public_html is acutal in where it says "site name", where it says "URL" I have http://www.gippmed.com. I was advised to put public_html in "site name" from my hosting. If I put anything else it publishes the entire site to a folder with that name on the server and is not viewable online?
    2) I have removed the spaces in the album page name and will reupload soon. In relation to the image file names, am I correct in saying that iweb is naming them from the captions? Do you really have to use one word captions or use underscores, it looks a little odd? I have read troubleshooting articles about iweb and spaces and it also recommends similar as you are, suggesting that all page names should have underscore instead of spaces. Problem is, if for example I change the page name "About Me" to "About_Me" iweb automatically changes it in the navigation menu and this looks silly to have undescores in the Nav Menu. Is there a way around this?
    Lastly, a new problem that I have never had before:
    Previously, iweb would remember what I had published and only publish new site changes. Now, every time I turn my computer off and on, I open iweb and it doesn't recognise any of the previous publishing, ie it republishes the entire site.
    Thank you again for your help

  • SSL indicator disappears when page with video tag has been loaded

    I have a strange bug in Firefox, that was detected when site moved to SSL.
    There is single page site built on Backbone.
    When page with video tag loaded SSL indicator disappears.
    Firebug shows that Firefox create GET request connection to the server but it hangs.
    All site logic work correctly. And video on this page works perfect, I can click play and new connection will be created and video played but first connection still hangs.
    There is four page with video tag (four steps of wizard) and hanged connection appears randomly on this pages.
    Actually this issue exists without SSL, but detected only when we moved to SSL and lock icon began to disappear.

    The SSL indicator can disappear if there is mixed content on that page (i.e. coming via an unencrypted http connection).
    Did you click the Site Identity Button (globe/padlock) and proceeded to the Security tab in Page Info?
    *https://developer.mozilla.org/en/Security/MixedContent
    *https://developer.mozilla.org/en/Tools/Web_Console

  • When i print out cd album case inserts-the songs all print in one glob and then the photo of album on same page prints out normal-only happens on my itunes -not anywhere else i print ok thanks

    hi-i need help- when i try to print a cd jewel case insert(i did this many times)the songs side will print out on top of each other like one big glob-and the other half the photo of album comes out correct-i thought it was my old printer so of course got a new one-still does the same crap-help me

    I believe that insufficient RAM may be the source of some of your problems. If you have a RAM of somewhere 4 to 8GB, you will experience smoother computing. 3GB doesn't seem right, so you might want to learn more by going to this site:
    http://www.crucial.com/store/drammemory.aspx
    I don't know what know what's happening with your optical drive, but it seems you use your drive quite a bit. In that case, look into a lens cleaner for your machine. It's inexpensive, works quite well.
    I hope you'll post here with your results!

  • Anchored Objects Disappear When Page Moved

    I'm working in InDesign CS2 in XP environment. I duplicated a page that contains anchored objects. It was page one; the duplicate page is now page 5. I modified the duplicate page 5. Now I want the altered page 5 moved into page 1 position.
    When I move the pages either by dragging or by right clicking on the page icon and using the Move Page command, all anchored objects on the page disappear. I also cannot release the anchored objects because the release command is disabled when I select an object with the selection tool.
    Any suggestions?

    I got your file, and after looking at it, it's probably better not to post it publicly. For the lurkers, it's a draft government document, not yet ready for release.
    Anyway, I took a look at the file, first in CS2 where it was created, and then in CS3 to see if it would behave differently.
    First, the anchored objects aren't really gone, just temporarily invisible. if you select the objects and move the page, you can still see the selection outline. It's some sort of screen display bug/glitch, I think, in CS2. Exporting to .inx didn't fix it, so I think it's not corruption, and it doesn't happen at all in CS3.
    The bad news is I have no way to explain what the problem is, or how to prevent it from happening. The good news is I found a way to make them reappear! Select the text frame with the selection tool, and change its stacking order. I tried Ctrl + Shift + [ to send to the back, and Ctrl + ] to bring forward, and both seemed to work, though it may make a difference where in the order they start out. If one attempt doesn't work, try again, or send all the way back or forward.
    For what it's worth, this is only a display problem. Even when the anchored objects are not visible on the screen they show in both printed and exported PDF.
    Peter

  • My photos kind of disappear when I scroll

    When I look through my library or albums or whatever, some photos are there for a second, but then disappear and I'm left with a dashed line around where my photo should be. But not all photos go away.

    Mer0mer
    Welcome to the Apple user discussion forum
    Try rebuilding your iPhoto library - launch iPhoto while depressing the option (alt) and command (Apple) keys - try the first three options first
    LN

  • Where do the photo email drafts disappear when the screen locks?

    This is getting very frustrating as it happens quite frequently.  I select some photos to email to someone, and then spend a lot of time writing the email.  Then I pause to do something else or get distracted, and the screen lock comes on.  Then when I unlock the screen, my email draft is gone!  It is not in the drafts folder.  It is not in sent items.  It just vanishes.  Then I have to re-type it from the beginning.  Major design flaw in iOS or am I missing something obvious?

    Interesting, no one knows.

  • Layers' actions disappear when pages are replaced in PDF?

    When I replace pages in an existing PDF with updated ones, my actions for layers seem to not keep the actions they had set to them. I check the properties, and they seem to be there, but the action does not work.
    I am replacing the exact amount of pages and the exact amount of layers.
    Any ideas? Am I missing something when I replace the pages?

    I think you will have to reestablish the actions. Layers are not like annotations that are left in place when the underlying page gets replaced. Layers (OCGs) are page contents, so when they're replaced with something new, the connection is broken.
    Consider what would happen if you replace a page that had OCGs with one that doesn't. Since the OCGs are no longer present, any actions that control them would naturally not work. So even when replacing a page with one that contains the same OCSs, they are still not considered to be identical at a lower level and the actions can no longer work.

  • Cannot upload my photos to a selling site. They are in my photo file, but disappear when going to upload. Help!

    Hello: I have been posting my work to Etsy for a long time. All of a sudden, the pictures are not available when I try to upload them Etsy. When I look in the photo file, they are there. Nothing has changed in my photographing or posting procedure. Help!
    Thank you

    Sorry, I will try to clarify. I use iphoto. I did not upgrade. Usually I take the photos, download them into my computer, edit them. I use the iphoto edit. Then I go to etsy to post them. It usually is very simple. You click on the prompt, it takes you to your iphoto files. I just type in the number of the jpg, and it shows me the picture I am looking for. I click on it and it uploads to Etsy. That is how it used to work. Now, I do all of the song and dance, but when I click on  the "upload your image" prompt, it shows me pictures, but the ones I want (the newest jpgs) are not there. If I exit Etsy and go to the files the pictures are there. By the way, there are other people having the same problem but nobody has posted a solution.....????
    Thank you for trying.

  • I am trying to print a booklet.  I have printed it several times without issue.  Now when I print, it gives me one blank page or else 2 out of my 8 pages?

    I am trying to print a booklet.  I have printed it several times with no issues.  Now when I try to print it (with no changes in the program) it will either give me a blank page or will print one of my pages (there are 8 pages total). Any help?

    No I didn't even read through your post, to long.
    You said that "No matter what program I try to install, as soon as the installer opens it crashes". Were you talking about the install for this/these 3D programs or ANY program? As it is worded it sounded like ANY program. That tells me there is a problem with your Mac, software or hardware.
    Now you say others install programs, which is it. Programs other then the 3D ones install or no programs install?
    Could simply be your Mac is to old to run these programs and the installer knows that. You never said what model or year Mac it is.

  • Why the window setting the printing disappeared when I try to select the page number of pdf file

    When I send the pdf file to the printer and try to select the page number to be printed by entering (e.g., 4-10), the page for setting up printing work suddenly disappeared.   As a result, I could only print pdf files from page 1 to the end, if I want to print any document.   I have no problem with printing word documents.  Thus, it should not be problems related to printer, right ?
    Your help is highly appreciated !

    What is your operating system?  Reader version?
    You mean the Print panel completely disappears when you enter some page numbers?

  • Pages disappear when viewing and printing

    On our Windows 7 Professional (Service Pack 1) 64-bit computer, using the Reader application directly (not through a browser), we have been frustrated with blank pages appearing while viewing and printing.
    This happens in Adobe Reader 9.5.0, 9.5.3, and 11.0.06.  (We had been experiencing these problems with 9.5.3, so uninstalled and installed 9.5.0, then updated to 11.0.06.  Same problem appears in all versions, but now is exceptionally bad in 11.0.06.   At one time we had updated to Reader 10, but reverted to Reader 9 because Reader 10 would not center pages correctly when printed, especially when Fit to Page was used.)
    When we open a file, pages initially display correctly.  But when we begin to scroll back and forth from page to page, the page images start disappearing. When we print, pages may display correctly just before the print button is pressed, and then may disappear after pressing the print button. If it disappears before the print function has completed, blank pages are output.   If a multi page document, the first few pages may print correctly then blank pages. 
    Once a page goes blank while viewing or printing, it does not restore.  One must close the PDF file and open it again.
    We have over 200 documents of 30 to 50 pages each, which are printed on a frequent basis and then bound.  It is extremely annoying and costly to have blank pages output when there should be info on the page.    We have been printing these documents for eight years.  Two years ago started using a brand new Windows 7 computer for printing PDF files, but the blank page issue started surfacing about 6 to 9 months ago and is getting more frequent.

    The system has 4GB of memory.  The processor is Intel Core i5 - 2400.
    As per your suggestion, I updated the driver for the integrated graphics
    card (Intel Graphics HD 2000).  The new driver is dated January 2014.  The
    old driver was dated June 2011.
    I tried to replicate the blank pages situation, and none went blank.   Will
    continue to test over the next week or so, but this looks very promising.
    Many, many thanks, Pat!

  • When I try to print in booklet form, the pages are scaled down greatly.

    I am trying to print an excel sheet (converted to PDF) in booklet form through Adobe Reader. It is full size in Reader, but when I switch it to booklet form, the pages become very small. I understand that each page fits on one half of a piece of printer paper in order to be folded, but they become extremely small.

    .  I am not allowed to select.  I think I hve to change a setting, bt what?
    David, have you enabled the "Autoflow" options? There are settings behind the cogwheel, that will automatically place unused images onto new pages. If you only want to select a few images from a large project, disable these two options:
    Or start your book froman album, that only contains a selection of your images, rather than from the whole project.
    Reagrds
    Léonie

  • When I print a PDF it always prints as a booklet, how can I print 1 full page?

    When I print a PDF it always prints as a booklet, how do I print a full page?

    In the Print dialog box you should be able to indicate which page you want to print and that page will print.  For instance, if you are viewing page 4, in the Print dialog, select "current page" and page 4 prints. This won't work if your page is actually a 2-page spread.  What size is the booklet?

  • Trying to print 4x6 photos.  How can I print with no borders on LR5 with my HP OfficeJet 7410?  Even when in Print mode in LR5, my photos show a border.  Page Setup shows "borderless".  Image Settings show "zoom to fill". But cannot print, nor even previe

    Trying to print 4x6 photos.  How can I print with no borders on LR5 with my HP OfficeJet 7410?  Even when in Print mode in LR5, my photos show a border.  Page Setup shows "borderless".  Image Settings show "zoom to fill". But cannot print, nor even preview, without borders.

    JimHess~  Many thanks.  In my short history with LR, it's amazing how many people I've seen ask this question.  I'm nearly embarrassed at how simple the fix was, but grateful that you didn't dismiss such a basic question.  You made my week.  And my friend's photo album...

Maybe you are looking for