Framed text box will not display on top layer of overlay

I am trying to place a framed photo and a frame text box over a layer. I have done this many times with no problem. Now, only the photo and its frame will overlay. The frame of the text frame displays but not the text. Only a place cursor is visible.

Check for text wrap on the other objects or alternatively, right click
the text frame and choose text frame options. Enable ignore text wrap.
Bob

Similar Messages

Source monitor and program monitor boxes will not display video in full only half

I have adobe premiere pro cs6 and source monitor and program monitor boxes will not display video in full only half. So the top half of both monitors are black and the bottom half is where the video displays. But you can see that the video is missing the top part. Like people's heads are cut off and can only see body. How can i fix this so premiere pro cs6 will use the full monitors boxes to display my video?

This is a known issue with a recent Windows update.
The Fix (post 3):
http://forums.adobe.com/message/5494175#5494175
The Status Update (posts 46 / 52):
http://forums.adobe.com/message/5555797#5555797

Edit Photo dialog box will not display

When I select edit in CS5 my file goes straight to CS5 and my edit in the dialog box will not display. I have no way to oprn with a copy or etc with out the edit dialalog box.
Iam using LR 4 latest version I must have changed some thing no realizing . Everthing was fine until a while ago.
All the NEF files that were recently imported are the ones that the dialog box will not show the TIF files the dialog box will show.
When these files were ompoterted all the history does not show in the module just the import. Did I import wrong causing all the history not to show??
Thank you
Dick
Message was edited by: [email protected]
Message was edited by: [email protected]

Hi Dick,
That sounds like normal behaviour with Raw files to me. They usually go straight through the Camera Raw pipeline into Photoshop. Rendered files like Tiff and Jpeg have the Original/Copy/Lightroom Adjustments dialog.
I'm not sure what you mean by History because on Import, there is only one history state: Import.
Sean

Timing of text box will not appear. My text boxes stop working on slide 5 and they will not work for the remainder of the slide show.

Timing of text box not working. I get the first few slides to work and then on slide 5 my text boxes will not appear. And they do not appear for the rest of the slide show. Help anyone.

Text caption is timed to appear at 2 seconds, but you have a click box at 0sec. Its duration is very short, which means that I cannot see if there is a pause. I suspect this click box is pausing at the end of its timeline, which is at 0.3secs and the Text caption at 2 seconds will not appear before the user has clicked on that click box. The timeline is the core of Captivate, learn at least how to read it.
Tiny Timeline Tidbits - Captivate blog
If you want the green text caption 'Click on...' to appear right at the beginning of the slide, you have to check its Timing accordion: set it to start at 0 secs instead of 2 secs and extend its duration to the 'rest of the slide'.
I don't know what is in the Group. That group and the HIghlight box will disappear at 3 seconds. Or maybe the action that is triggered by the Clickbox is different from 'Continue'?
Lilybiri

Text box does not display the date??

I have a text box <input type="TEXT" name="invoiceDate" readonly></input>. I select the date using datepicker .The date gets displayed in the text box.Then i click on "Show" button which loads the same jsp page again.
When the page is loaded the text box does not show the date.
I try to save the date in the text box as
<% String date1=request.getParameter("invoiceDate");
<input type="hidden" name="date1" value="<%=date1 %>">
<%>
The value is saved in this hidden variable..
Plz help me what to do next
Thanks

Its a hidden field and that's why it isnt displayed.
Use
<input type="text" name="date1" value="<%=date1 %>"> ram.

Callmanager End User Dialog Box will not display Function Buttons

When I go to USER MANAGER - END USER all of my function buttons are missing. There is no:
ADD NEW
SELECT ALL
CLEAR ALL
DELETE SELECTED
Also, I cannot edit the existing users even though I am logged in as Administrator. Please see the attached screenshot with the missing buttons. Is this a misconfiguration or could the software be corrupted?
Thanks,
Ron

Chris:
I just have a VoIP lab, therefore I don' t have an LDAP server. I did create a modifed end user group, however I deleted all of the users from that group. Is there any way to restore the creating/editing of users without reinstalling the CUCM image?
Thanks,
Ron

Some Text Messages do not display when using large font on iphone

When using increased font size (accessability function) on iphone some text messages will not display. The iphone just seems to lock up. If normal font size is used text massage displays with out any issue. When font size is increased, text message will not display again.

Hi Peter
Actually, Captivate does have an essentially unlimited number
of undo levels. But that number may appear to be different. The
number of levels starts when you begin editing the project. If you
close and re-open a project, that starts the undo process over.
I've tested and I gave up after about 280 or so undos.
Where Captivate doesn't allow an undo, it normally warns you
with a rather catastrophic looking dialog.
Cheers... Rick

XI3 set top box will not rewind or pause tv in second room

Turned my tv on after work and same problem. Unplugging the card is the same as unplugging the box and only is a temporary fix.

I have the X1 triple play system and the second set top box i have, an XI3 box, will not rewind or pause live tv. The main X1 DVR box works relatively ok, besides randomly deciding the left or right button should be the 2 or 5 button, but the second set top box does not. The XI3 box i have in my room is supposed to allow rewind and pause functionality. It takes away one of the lines from the X1 box so instead of having 4 lines to record on the main tv and live tv in the second room, it gives you 3 lines to record on the main tv and live tv with pause and rewind functionality on the secont box. This worked perfectly until about a week ago. Ever since then, the rewind and pause functions do not work. The only way to get them to work is to unplug the XI3 box (since it does not have a power button) and plug it back in. They will work for about an hour until they stop working and i am told again by an onscreen prompt that rewind or pause are not available on this box. I ask here if there is any resolution to this problem because calling customer service is a 40 minute waste of time and the online chat is basically the same. No one can resolve this and 90% of the time i am told that there is no set top box for the X1 system that allows rewind or pause, which is obviously not true. It takes me 40 minutes on the phone of constantly being told i am wrong and to please hold for just another minute as the employee waits for a supervisor or another employee to help them. Who ever Mario is, i have heard your name on three calls so far as the employee is begging you for help. Each time i have been told by the rep that i need to bring my box into a local xfinity store to have it swapped out. I was also told i couldnt activate any services until i returned my old boxes as the rep didnt know how to handle the situation. Each time i went to the store i was told by the Xfinity rep that the employee i spoke with did not know what they were talking about and flat out lied to be just to get me off the phone. So wonderful customer service on Xfinitys half. Basically straight inline with what everyone on the internet and consumer reports say. The chat was no better. In between obvious copy and paste comment, or the need to tell me about additional services and faqs between every comment, they were not ableto resolve my issue. I just want to get the service i am paying for. Everything about this X1 service has been a nightmare since i got it. Nothing works as it should and unplugging my box every hour is not an answer to why i cant rewind my tv.

The main window of third page will not display the text element

Hey, smartform guru,
I am working on the smartform to print PO data.
The smartform has first page and next page as usual.
I created a third page P_TERMS to print the terms and conditions for PO printout.
I used commend node to assign the page P_TERMS as the "Go to new page" and it did go to the P_TERMS page but the text element will not print in the main window in P_TERMS page.
The text element will print in the secondary window.Since the terams and conditions are 4 pages long, I expected it to print in the main window, so I do not have to define several extra pages to print them.
Any idea?
Thanks in advance!
Fisher Li

Hi Fisher,
Unfortunately, In a smartform, only single main window is continued to all pages even though you can declare windows under each page as main window, but it actually acts as the same window for all pages. It just means that if text from 1st page is overflowed, it will continue to the next page with main window.
Command line to go to next page will create an extra page but since text is not flowed in main window, it won't print the text element you have included in main window on third page.
The solution to your problem as I see is that either you include your terms and conditions in the main window of your first page and just before your text element for T&Cs, use Command to go to third page.
Hope it helps.
Ravi

Overnight, text body of emails will not display for messages in inbox-only the from and to and a subject line displays. Draft messages in Ipad display fully. Inbox emials display fully on my main Dell computer and my Iphone. Any ideas? Duanekot

Overnight, the taxt body of emails will not display for all messages in the inbox. Only the From and To and a subject line display. All messages in my Draft Mailbox display fully. Also, all emails in my Dell laptop and my Iphone display fully. Any ideas?? Duanekot

See if this helps .... Reset the iPad.
Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails.

Safari will not display pdf files since installing OS 10.8.2

Safari will not display pdf files uner Lion 10.8.2

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Clock will not display, Eject button not working

Odd problems. Users clock will not display, check the box and it will not stay, clock never appears. Now the eject button will not function properly.
Logged in as a different user, same problems. Must be a system thing...
Ran Disk utilities both while in the OS and from the install CD. It did find some problems but says it repaired them all. No change.
Ran TechTool Pro, it said it found some problems and fixed them. No change.
Trashed all preferences and .plists, reboot. Everything reset to defaults no change to clock or eject button.
System is G4 Mirror Door Dual 1.25Ghz, 1GB RAM, on system 10.3.9 all updates applied.
The odd thing is everything else seems to be working properly... None of the Apps complain or display anything wrong...
Any other thoughts would be appreciated.
-Ryan
X Serv G5 2.3 Dualies Mac OS X (10.4.2)
X Serv G5 2.3 Dualies Mac OS X (10.4.2)

Ryan,
I see that you list X Serv and Tiger 10.4.2 for your computer profile. I presume that you are talking about a different computer in the text of your post since you specify system 10.3.9.
Problems of that nature can often be rectified by removing the com.apple.systemuiserver.plist from the ~Library/Preferences Folder, or by reapplying the most recent Combo update.
;~)

My yahoo toolbar will not display.

My yahoo toolbar will not display. Tried re-setting, reinstalling the toolbar and resetting firefox. Still doesn't display.

I ended up getting rid of my Yahoo toolbar altogether and now I'm happy and hassle-free. See:
https://support.mozilla.org/en-US/questions/1043713
If you choose to do what I did--go to each page/website you like. Click and move the "www. Globe" in the address bar down to the Bookmarks Bar--"Most Visited" bar. When the toolbar is filled, they will be in the side-bar when you click >> to the right. You can move them around by clicking on their icon. You can delete any by right-clicking. Play with it and you will see.
For bookmarks: Add the Bookmarks Manager App from the 3-bar menu bar at the top right. I exported my Yahoo bookmarks to an HTML file (as backup). Then click on Bookmarks Manager App--click on Show All Bookmarks--click on Import and Backup in Menu Bar--click on Import Bookmarks from HTML. To save a page into Firefox Bookmarks--just click on the star in the toolbar at the top--it will turn blue--click it again to put it into a folder or make a new one. The dialog box also shows you how to edit or delete a bookmark.
I am not a computer whiz so I had to write it in layman's terms.
It is really easier and quicker than the Yahoo toolbar. It looks cleaner too!
If you have technical questions go to the bottom of:
https://support.mozilla.org/en-US/questions/1043713
and reply to FredMcD--he'll help you.

Help!!! How to make quicktime plugin do not display on top of the web page?

Any one knows how to make quicktime plugin do not display on top of the web page??? I've tried to change the zIndex property using javascript, but it doesn't work.
Because we have some widgets which are required to be moved to anywhere on the page, we use iframe to implement that, so it can display on top of quicktime plugin, but the plugin flickers sometimes when we do some operation on the widget which is on top of it.
Anyone can helps me? Thanks in advance!!!
Windows XP Pro

> Can you tell me how to set the script so that the
lightbox image is
> displayed
> on mouseover instead of mouse click.
Check the docs. Trent is usually very thorough in his
instructions.
Hint: I haven't studied it but it probably involves modifying
one of DW's
built-in Behaviors.
Walt
"ducati1" <[email protected]> wrote in
message
news:gkb906$qrd$[email protected]..
> Wow that DW extension is just what I needed.
> Thanks..
> Can you tell me how to set the script so that the
lightbox image is
> displayed
> on mouseover instead of mouse click.
> I currently have the thumbnails set to insert the ALT
text into a text box
> on
> mouse click.
>

My ITunes will not display songs correctly

Ok my Itunes on one of my computers will not display the three boxes at the top labled Genre, Artist, Album. I do know that there is a view icon at the top with three boxes and you click the one to the left. I have two computers and it works just fine on one but not the other. Please Help. Thanks.
John

Hit ctl+B to show the browser.
Or, itunes menu > View > Show Browser.

Framed text box will not display on top layer of overlay

Similar Messages

Maybe you are looking for