FrameMaker 10 tagged PDF settings not saved

When I need to output a book as a tagged PDF more than once, I find that I have to reenter the settings for Included Paragraphs and Logical Stucture Level every single time, unlike my Bookmark settings, which are preserved.
This is true regardless of whether I'm using the Save As or Print route to PDF. This was not the case last year, when I was still using v7.2.
Is there some trick to make these settings stick?
(Version 10.0.2.419 on Windows 7)

Thanks. That worked.
I knew these were document level settings, but today I learned that:
Changing these settings at the book level is not persistant.
The first file defines them for the entire book.

Similar Messages

  • How to set tagged pdf settings for batch process

    Framemaker doesn't allow me to set tagged pdf settings without opening a file (i.e. *.mif/*.fm/*.book).We are using .MIF files to generate PDF in an automated process.( .MIF files will be sent to FrameMaker as a batch file using DZBATCHER then it it uses distiller to produce the PDF).
    How can I set tagged PDF settings for this kind of operation?

    Tagged PDF info is a document level property, i.e. you need to define it in the MIF. Check your MIF manual for: <DPDFStructure and <DPDFStructureDefined statements.
    Note: If you're using any FM version earlier that FM9 and not the FrameServer version, please read your EULA very carefully (Section 2.2 - 2.4) concerning automated creation of PDF files. With FM9, the restriction apparently has been loosened to only how the process is intiated (Section 2.3).
    Copies of the EULAs can be seen here: http://www.adobe.com/products/eulas/

  • ICloud mail settings not saved in System Preferences on Mountain Lion

    I note that iCloud mail settings not saved in System Preferences on Mountain Lion even if I tick mail in Icloud then close system preferences then open system preferences and it is untiked again?
    Does anyone know how to fix this?
    Cheers
    Paul

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • "Desktop & Screen Saver" settings not saving upon reboot.

    "Desktop & Screen Saver" settings not saving upon reboot. Settings are always set back to factory default upon computer startup. Need help! Please!

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    resetpassword
    That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’renot going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Windows 8.1 folder view settings not saved

    Hello, Everyone
    Windows 8.1 Each folder view settings not saved what i can do.I
    want different view settings in each folder likes folder 1 i want large thumbnails & folder 2 small
    What i can do to resolve the issue thanks in advanced.
    I don't have any backup no system restore I also try to rest or restore default view settings but none are working for me.

    Hi,
    This is default behavior. It is not possible to set Windows Explorer to remember individual folder view settings for folders included in libraries. All libraries and its included folders share the same view.
    Karen Hu
    TechNet Community Support

  • PDF files not saving/missing and leaving "aa12345" and "aaa12345" files??? - Solution

    risscand: I have workers that are unable to save and they are seeing an "aaa04916" type file in their working folder. This is causing us to lose work (because we are unable to save over the original file) or send out incomplete documents.
    Mudassir: As I understand when you try to edit and save a document, it directly opens "Save As", is that correct?
    risscand: No. When the user saves normally. Ctrl+S or the "Save" icon via the disk at the top of the page it appears to save however the PDF does not actually rewrite
    risscand: This results in an aaa12345 file in the folder, but an unchanged PDF.
    Mudassir: Okay.
    Mudassir: Thank you for the information.
    Mudassir: I will be glad to help you with this issue.
    risscand: Excellent
    Mudassir: May I know if you are chatting from the issue facing computer?
    risscand: I am not currently experiencing the issue but many of the employees in this office are.
    risscand: I can review the issue and see the files however, our worked is based off of a server.
    Mudassir: Okay.
    Mudassir: Marissa, this error often occurs due to a confict with Acrobat application and Windows Preview.
    Mudassir: In order to resolve the issue, you need to disable the Windows Preview in the Windows Explorer
    Mudassir: Follow the steps below to fix:
    Mudassir: Go to “Computer” or a windows explorer window, click on the “View” tab and then make sure the “Preview pane” is unselected. Then try saving your PDF document again.
    risscand: This option was not used by the users
    risscand:: I just asked one of the individuals who was experiencing the issue and she has never used that option.
    Mudassir: Just a minute.
    risscand: Thanks
    Mudassir: Thank you for your patience.
    Mudassir: Are all the users using Acrobat or Adobe Reader to save the PDF files?
    risscand: Acrobat
    Mudassir: Is that PDF file saved on network?
    risscand: Yes
    Mudassir: Does that users have the complete access to the network drive and are all the users use that PDF at a time?
    risscand: The PDF's are used one at a time. The individual who combines the reports that the workers probably does not have complete access to the network.
    Mudassir: To re-write the PDF which is saved on network, the users need to have complete access. If not, they will get the save as option and they can save that PDF file on their local drive
    Here are the options I got from Customer Service - Hopefully it will help some of you!
    -Riss

    Hi risscand,
    Are you still facing this issue or your issue has been resolved?
    Regards,
    Rahul

  • Settings not saved correctly

    Saving that always a file should be opened with a program does not work correct.
    I want *.nzb to be opened with a certain program. I save this combination and still everytime I get the option of an other programm.

    The article you provided is not related to the error message that the user is getting it.
    Can you please provide better solution? I know this answer and this post is old but I am having same issue.
    The error message is only (The Delegates settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed) I was not able to attach screen shot.

  • Modification to pdf files not saved in the original document

    The modification to pdf files are not saved in the original documents (e.g. in My Documents) but a new file is created in Download\Adobe Reader and for every saving I do a new file (e.g.  -1, -2, ..) is created. Is that normal? If yes, it is really annoying.
    Adobe reader 10.6.1
    Android 4.1.2
    Thanks

    No, it is not a read only file and I can modify it. The problem is that the modifications are not saved with the same name in the original (e.g. in My Documents) folkder but in a different one (Download\Adobe Reader) and for every saving I do a new file (e.g.  -1, -2, ..) is created.

  • Graphic EQ settings not saving??

    Hi. I've just installed an old version of soundtrack 1.2 which I've never used before but I'm very familiar with other DAWs and finding this nice to use.
    I'm using it for live backing track purposes with 10 songs in sequence in their own tracks and the plan was to have the Apple graphic EQ assigned to every track so that I can EQ each song to sound it's best at gigs. The problem is that for some reason each time I've set them, saved session and rebooted, all the EQs have been reset to flat (either that or simply not saved).
    I have now removed all Graphic eqs and I've assigned Ozone to each track temporarily (risking CPU overload really) so that it's usable and the Ozone settings are saving fine.
    Can anyone shed some light please, this is weird. (incidentally, the Graphic EQ checkboxes are all checked in effects window).
    Thanks- grateful for any help.

    Hi,
    10 songs in sequence maybe too much, Graphic EQ should can save all the settings.
    audio software

  • Outlook view settings not saved

    I have one user who looses all View settings when restarting Outlook. Occasionally they will save, but it is very rare. Setting the Reading Pane to Off is one good example of a setting that does not save.
    The creation of new Views is also not saved. After restarting Outlook, the new View does not appear in Manage All Views.
    I have tried creating a new Outlook profile and I'm told that Office 2013 C2R has been re-installed since this problem started. 
    Outlook 2013 Click-To-Run via an Office 365 E3 subscription. Exchange Online mailbox. Windows 7 Pro 32-bit. 
    Any help would be appreciated. 

    Hi,
    Basically, Outlook view settings are stored in the default data file. If the data file is corrupt or recreated every time Outlook restarts, the view settings may be not saved.
    Does the user use Outlook with Cached Exchange mode enabled? If so, please go to
    C:\Users\%username%\Documents\Outlook Files and check if you have multiple .ost files in the folder.
    In addition, you may try to switch to turn off Cached Exchange mode and then test this issue again.
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • N82: Clock settings not saved!?!

    Just got an n82, and I found that the clock settings that I entered the first time when starting the phone are not saved. Every time I turn on the phone I am asked to enter time and date again, which is quite annoying. A consequence is that the alarm does not work either. Any idea on what to do?
    Ronnie
    Message Edited by brasklapp on 29-Dec-2007 06:34 PM

    The phone itself might be new, but who knows how long the battery itself has been waiting in the storehouse. So it should be checked first...
    Ericsson T10i -> Nokia 7110 -> Siemens C45, C55, M55, M65 -> Nokia 6131, N73, N82 -> HTC Wildfire, Desire HD -> Nokia Lumia 800 -> HTC Desire X -> Lumia 820 -> Sony Xperia SP -> Lumia 925 + Sennheiser CX 500
    If I've helped, use the Kudos button to thank

  • 6303i - display settings not saved!

    Hello - I have updated my 6303i to the latest firmware from the nokia site.
    Everything works fine but now any chance I make to my display settings (e.g. wallpaper) are not saved, i.e. the change is being populated until the next reboot of the device. Once I rebooted the device, all my display settings changes are lost and e.g. I am back with a device with no wallpaper.
    Any idea what is going on?
    thanks

    The problem came back a while after installing 10.10.2.
    However, it does seem to have been fixed by 10.10.3.  Hooray.

  • VPN settings not saved after upgrading ipad

    I got an ipad mini so I did a backup of my ipad 3 and restored that copy to the ipad mini.
    Everything was restored ok with the exception of my VPN settings, it's a VPN from work and now I can only access that network from my ipad 3, not form ipad mini.
    Please help

    I'm having the same problem too. I backed up my iPad 3 settings and downloaded to my iPad mini, now the exchange email settings won't save.
    The credentials are exactly the same as my iPhone, bit it keeps giving the message 'unable to verify account information'
    Anyone else having this issue with the iPad mini not saving settings?

  • User Settings Not Saved

    Hello,
    I am using the VB .Net Autoupdater for my app, its working perfect however.
    Lets say I am using version 1.0.0.10, Initially when the app ran after I installed it I had to fill in a bunch of user settings via a form a created.
    I can close the app, re-open it and the user settings are saved, all is good. Now
    I need to make a change and now have version 1.0.0.11 I use the autoupdater and it pulls down the .exe file overwrites the existing .exe.
    Now when I launch the app again, the correct version is used however I have to re-enter my user settings again.
    How can I preserve my user settings without using a Click Once install?
    Thanks
    MW

    Sure,
    I'm always open to learn new ways of doing something.
    Thanks
    MW
    Ok, have a look at the code that I posted on a page of my website here.
    It's very specific to what you want saved and how it's to work, so that's what you'll see: It's very much customized to what he wanted.
    One important part is what you'll see early on:
    Private Shared _instance As Settings
    and this:
    Private Sub New()
    End Sub
    Those are private, so only that class can access it. The backing field (variable) is shared so that it's relevant to the class as a whole, not to any instance of it; that is -- there can only ever be one instance of it.
    The constructor is parameterless and PRIVATE, so that the consumer of that class can't create an instance; that's only done through the shared method meant to do it:
    Public Shared Sub GetInstance(ByRef instance As Settings)
    See what I mean?
    Still lost in code, just at a little higher level.

  • Some settings not saved in Presets file

    I'd like to setup my fme environment with preset Xml files
    (and with some dirty scripting hacks, we make the app load them
    automatically).
    Unfortunately, not all the Device settings are saved. There
    is a tuner specific Settings tab whose settings are not saved. So
    if I want to change the actual TV channel I have to use the GUI.
    Other settings (like crossbar_input) are found in the XML file.
    Is there a way to set entries that are not saved by the GUI
    directly in the XML presets file and make fme use them?

    What you're looking for is startup.xml, which will be in the
    application data directory for the current user. On my Vista
    machine, the path looks like this:
    Drive:\Users\Admin\AppData\Roaming\Adobe\Flash Media
    Encoder\startup.xml
    that's where all of the current UI settings are stored. So
    you know, startup.xml is UTF-16 encoded and it needs to stay that
    way, and (for some reason) there needs to be a blank line at the
    end of the file.
    Hope it helps

Maybe you are looking for