Framemaker 7.2 crashing - size limit?

I'm using FrameMaker 7.2. I've got a project with 22 files - about 8.2 MB. When I try something simple (yet VERY important) like resolving xrefs throughout the files, FM crashes after a few minutes.
1) Is there a size limit beyond which FM will not work?
2) Is there a number-of-files limit beyond which FM will not work?
I fear that if I split up the project (perhaps putting the appendicies in a separate "book"?), the xrefs will not be resolved completely.
PLEASE HELP!!!!
Thanks,
Deb

It's difficult to determine. (BTW, my sysadm guy did "watch" the system during an attempt and said that there is plenty of everything (memory, CPU, etc.) for this to work.
It actually does happen during xref updates. FM begins to resolve the xrefs and then freezes and sits there for a while before crashing. Sometimes it will open a file (so that I can guess where it's getting stuck) and sometimes it won't. The funny thing is that I'm using conditional text and I build smaller docs (for business users) without a problem. Only when I include the extra files for the larger docs (for technical users) that it can't handle the load (or so it seems). I've even tried rebooting and closing Outlook/Skype/etc. (processes that I don't need) to give FM the system's full attention!
I actually only open one file in the book and then try to Update References from there. I'll try to open all the files and see if that makes a difference. Thanks for the idea and I'll let you know how it goes.
Thanks VERY much for your reply and for changing my mind about these forums being big black holes into which questions fall with no hope of a reply!

Similar Messages

Is there a size limit on the iPod for the song database file ?

I have been running into the same issue for the last 2 weeks: Once I exceed 110 GB on my iPod Classic 160 GB, iTunes is no longer able to update the database file on the iPod.
When clicking (on the iPod) on Settings/About, the iPod displays the wrong number of songs. Also, the iPod is no longer able to play any songs.
Is there a size limit for the database file on the iPod ?
I am making excessive use of the 'comments' field in every song that I load to the iPod. This increases the size of the database file.
Is there a way, that I can manually update the database file on the iPod ?
Thanks for your help !

did you experience some crashing of the ipod as well? do you know how many separate items you had?

Belle email transmit 2MB size limit - what exactly...

There are multiple threads here which claim there is a 2MB size limit on sent emails - unless when you set up the email account you DECLINE the terms and conditions.
HOW ON EARTH DOES THIS WORK????
Maybe Nokia are providing an email service (like Yahoo or Hotmail, etc) in which case, yes.
But any "normal" email user is going to configure a POP server for receiving, and an SMTP server for transmitting. Surely, if you transmit emails via your configured SMTP server, there cannot be any Nokia-imposed email size limit?
The only way there might be a universal limit would be if Belle, quietly and transparently, ignored the SMTP server settings and actually sent the email to some Nokia-operated SMTP server, together with the login details of the SMTP server which you configured in the phone, and the Nokia server then passed the email on to your one.
There is a separate issue with sending attachments from the Gallery (photos or movies) whereby the invocation of the email app (via the Send / Email menu) crashes the email if the attachment size is bigger than about 500k bytes. It happens only if the email app is thus invoked. It happens with both the Nokia Gallery app and with 3rd party picture album apps. It does not happen if one starts a fresh email and then attaches files to it (which just happen to be images) and I have successfully sent myself 40MB emails that way.
However if the email app crashes, or fails to send the email due to persistent poor mobile data connectivity, any attachments will be left orphaned in the 1000484b folder and will eat up your c: space, so one needs to do this with caution.

At least for fios email see
http://www22.verizon.com/ResidentialHelp/FiOSInternet/Email/Storage/QuestionsOne/85691.htm

PDF size limit?

Is there a size limit in pages that the iPhone can handle? It tends to freeze up or just close large PDFs (8+ pages). I know the iPhone will kill apps that exceed a certain in memory size.

There's no page limit, per se, other than the overall file size issue you refer to (not a hard limit there, either, but crashes are more likely with larger files and longer time since the last reset of the iPhone).

Problem adding zip files - is there a size limit?

Is there a size limit on zip files that are uploaded to the system? I have tried to upload zip files (18Mb and 28Mb) this morning, and on both occasions not all of the zipped information is uploaded.
Please could you let me know why only half of my files and folder names are being loaded.
Thanks very much
Kate

I had this problem. Portal was installed here with the default
storage settings on all of the tables, including
WWDOC_DOCUMENT$. My upload would crash with NO ERRORS. I
looked at the apache error_log file and saw just what I
expected: that table was blown out becaus it had reached max
extents. I moved that table to its own gigantic tablespace and
sure enough, the load went through fine. You might also be
interested in what you find in WWDOC_DOCUMENT$. Because even
after a purge, I found that files that got partially loaded were
still in that table, even though they weren't visible through
the portal. So I deleted them, and freed up even more space.
I'd recommend you move that document table to a separate
tablespace that the DBA can manage separately, because it's not
going to grow like a traditional transactional system, so it
really doesn't belong in the same area.
Hope this helps,
Adrian Klingel
Exaweb

Is there a file size limit of each pic /or total of all pictures for iBook

I am putting together an iPhoto book using pages of several pictures each I have composed in Photoshop. I then import these pages as a jpeg or psd to iPhoto. I am finding the jpegs often do not import (with message explaining, etc) but that the psd documents do import. These are rather large documents because of the several pictures used on each page. I am planning to do 30 double sided full bleed pages and I am concerned the finished book will be refused because the completed book file is to large. Should I be? Another way to put this could be: is there a size limit of each page or the total size of the book that iPhoto will accept for an individual book?

Your best bet would be to make duplicate of your iPhoto Library folder and then open the duplicate and delete all the photos that do not belong to the book. Keep the book in the Source pane however. If you think some photos might be added later then keep them also.
Now the iPhoto Library folder will be small enough to burn to disk (just drag the folder onto a mounted, blank disk and burn via the Finder). That folder can then be copied from the CD to the desktop of the other computer and opened with iPhoto to continue with the fine tuning. I'd rename the library folder to something like "Book Library" before burning to disk. This method is also a great way of preserving the book after you've ordered it in case you want to order a second copy at a later date. I create a special library for all my books for that exact reason. Once ordered and burned, I can reorder the same book later on even if I have a catastrophic drive crash in the meantime.
Do you Twango?

"Convert Text to Table" Size limit issue?

Alphabetize a List
I’ve been using this well known work around for years.
Select your list and in the Menu bar click Format>Table>Convert Text to Table
Select one of the column’s cells (1st click selects entire table, 2nd click selects individual cell)
Open “Table Inspector” (Click Table icon at top of Pages document)
Make sure “table” button is selected, not “format” button
Choose Sort Ascending from the Edit Rows & Columns pop-up menu
Finally, click Format>Table>Convert Table to Text.
A few days ago I added items & my list was 999 items long, ~22 pages.
Tonight, I added 4 more items. Still the same # pages but now 1,003 items long.
Unable to Convert Text to Table! Tried for 45 minutes. I think there is a list length limit, perhaps 999 items?
I tried closing the document w/o any changes. Re-opening Pages & re-adding my new items to the end of the list as always & once again when I highlight list & Format>Table>Convert Text to Table .....nothing happens! I could highlight part of the list up to 999 items & leave the 4 new items unhighlighted & it works. I pasted the list into a new doc and copied a few items from the middle of the list & added them to the end of my new 999 list to make it 1003 items long (but different items) & did NOT work. I even attempted to add a single new item making the list an even 1000 items long & nope, not working. Even restarted iMac, no luck.
I can get it to work with 999 or fewer items easily as always but no way when I add even a single new item.
Anyone else have this problem? It s/b easy to test out. If you have a list of say, 100 items, just copy & repeatedly paste into a new document multiple times to get over 1,000 & see if you can select all & then convert it from text to table.
Thanks!
Pages 08 v 3.03
OS 10.6.8

G,
Yes, Pages has a table size limit, as you have discovered. Numbers has a much greater capacity for table length, so if you do your sort in Numbers you won't have any practical limitation.
A better approach than switching to Numbers for the sort would be to download, install and activate Devon Wordservice. Then you could sort your list without converting it to a table.
Jerry

Connection pool size limit error

Hi all,
I am trying to execute a BAPI function from MII, execution fails with the following message;
[ERROR] Unable to make RFC call Exception: [Problem retrieving JCO.Function object: Connection pool <ECC_Server>:800:02:EN:ECCUser is exhausted. The current pool size limit (max connections) is 1 connections.]
[WARN] [SAP_JCo_Function_0] Skipping execution of output links due to action failure.
[ERROR] Uncaught exception from SAP_JCo_Function_0, Problem retrieving JCO.Function object: Connection pool <ECC_Server>:800:02:EN:ECCUser is exhausted. The current pool size limit (max connections) is 1 connections.
Config:
1. In 'SAP MII: Connections' of type JCO and have given pool size to 100.
2. In 'SAP MII: Credential Stores' store is created and same is being used in Start Session.
3. In JCO_Function block, we can search for the Function Module and set it.
MII Version:
14.0.2 Build(82)
Am I missing something?
Has any one seen this? please advise.
Thanks,
Message was edited by: Shridhar N

Check if there is another JCo connection configured with the same IP and User. I have found in the past that even though there are two connections configured because they have the same ip and user they are put into one pool with the lowest max pool of the two connections.

Is there a way to put more apps (increase the folder size limit) in iOS 5.0.1 on iPad2

I read on some site that there is an app that allows one to increase the desktop folder size limit in iOS 5.0.1 on an iPad2 does anyone have any info please?
Thanks for any thoughts in advance.....
Dave

Firstly, Thanks for taking the time to reply :-)
It's not that I want gazillions of apps, I just wanted to put more in each folder so I don't have to have multiple folders with similar names....Weather1, 2, 3,etc.... but I see your point and appreciate the thoughts.
Dave

How do I change the attachment size limit in Calendar Server 6.3, UWC, IWC?

How do I properly increase or decrease the attachment size limit with Calendar Server and all supported user interfaces to it such as WCAP, UWC (Communications Express) and IWC (Convergence)? From my experience with the Outlook Connector, there seems to be some limit imposed by cshttpd on the size of a file upload (I believe I actually got an HTTP error code back on the wcap request indicating something was too big, sorry I don't have it handy, I'll have to re-test). Additionally, it seems UWC imposes additional limits (Example: http://docs.sun.com/app/docs/doc/819-4440/6n6jfgcjh?l=en&a=view&q=fileSizeHardLimit) but I can't seem to get those to work at all. I found many different web.xml related to UWC and I'm not sure which one to change, I tried a couple but had no success because UWC would always report this error if I uploaded between 4-5 megs: com.iplanet.jato.util.WrapperRuntimeException
Root cause = [java.io.IOException: Request cancelled because file input field
"importFile" size is over the configurable limit of 4194304 bytes; see filter init
parameter fileSizeHardLimit]
And it would complain about requestSizeLimit I think if it was over 5 megs, claiming that limit was 5242880. IWC gives a generic error when the upload is too big and rejects it.
I fear that a 4 meg limit will be too imposing and of limited value, so I would either like to raise it, or consider lowering it to 0 bytes so attachments cannot be used at all. I have been looking high and low for information on how to do this and all I can find is the UWC examples. I plan to support the Outlook Connector, UWC, and IWC so the limits should ideally be the same across each. Some of the Exchange data we wish to import does have some attachments so it would be good to continue support for that. I did see some other posts about quota RFEs but at this point I am not concerned about the disk consumption. Can anyone help? Thanks. Please let me know if there is any more information I can provide. I am running SCS6u1 on Solaris 10 SPARC.

Fred@egr wrote:
Thanks!!! This is working with IWC and I am pretty sure it will work with Outlook. I didn't think to look at config options for mshttpd since I don't have it installed and ics.conf doesn't list the http.service.maxmessagesize and service.http.maxpostsize by default.http.service.maxmessagesize is only relevant to mshttpd, not cshttpd. service.http.maxpostsize applies to both.
UWC is still limiting me though; I'm sure I can reconfigure UWC if I just know which file to edit and if I need to redeploy anything. I'm using the same install paths as the SCS6 Single Host example and I'm not sure which the "uwc-deployed-path" is supposed to be. Again, thanks.If you have deployed UWC/CE to Application Server you would edit the following file and restart application-server:
/opt/SUNWappserver/domains/domain1/generated/xml/j2ee-modules/Communications_Express/web.xml
e.g.
<filter>
    <filter-name>MultipartFormServletFilter</filter-name>
    <filter-class>com.sun.uwc.calclient.MultipartFormServletFilter</filter-class>
    <init-param>
      <param-name>fileSizeHardLimit</param-name>
      <param-value>15485760</param-value>
    </init-param>
    <init-param>
      <param-name>requestSizeLimit</param-name>
      <param-value>15485760</param-value>
    </init-param>
    <init-param>
      <param-name>fileSizeLimit</param-name>
      <param-value>15485760</param-value>
    </init-param>
</filter>Regards,
Shane.

LabView RT FTP file size limit

I have created a few very large AVI video clips on my PXIe-8135RT (LabView RT 2014). When i try to download these from the controller's drive to a host laptop (Windows 7) with FileZilla, the transfer stops at 1GB (The file size is actually 10GB).
What's going on? The file appears to be created correctly and I can even use AVI2 Open and AVI2 Get Info to see that the video file contains the frames I stored. Reading up about LVRT, there is nothing but older information which claim the file size limit is 4GB, yet the file was created at 10GB using the AVI2 VIs.
Thanks,
Robert

As usual, the answer was staring me right in the face. FileZilla was reporting the size in an odd manner and the file was actually 1GB. The vi I used was failing. After fixing it, it failed at 2GB with error -1074395965 (AVI max file size reached).

[AS3 AIR] 2880x2880 Size Limit, Camera, Filter, CameraRoll Issues & Finger Friendly Components

AS3 AIR ANDROID
I started playing with this Adobe AIR for Adroid by building an app that would let the user take a picture using the mobile device's native camera app. Then, I'm applying filter effects to make the image look cool. Then, I'm allowing the user to save the image back to the camera roll.
Here are some questions that I have:
KEEPING UP WITH CURRENT TECHNOLOGY
Are we limited to the 2880x2880 stage size limit? Although, this dimension does yield 8+megapixels, it's not in the ratio that most camera sensors are built (widescreen). Plus, you can bet that newer cameras will have even higher dimensions. Will this be updated to keep up with current technology requirements?
IMPORTING & MANIPULATING CAMERA DATA
Code
var bmpData:BitmapData = new BitmapData($loader.width, $loader.height);
bmpData.draw(DisplayObject($loader));
bmp = new Bitmap(bmpData);
bmp.width = Capabilities.screenResolutionX;
bmp.height = Capabilities.screenResolutionY;
if (CameraRoll.supportsAddBitmapData) {
    var cameraRoll:CameraRoll = new CameraRoll();
    cameraRoll.addEventListener(ErrorEvent.ERROR, onCrError);
    cameraRoll.addEventListener(Event.COMPLETE, onCrComplete);
    var savedBmpData:BitmapData = new BitmapData (bmp.width, bmp.height);
    savedBmpData.draw(DisplayObject(bmp));
    cameraRoll.addBitmapData(savedBmpData);
} else {
    trace("~" + "Camera Roll not supported for this device.");
addChild(bmp);
When you capture an image using the mobile device's camera app, you have to use the Loader object.
So, here, I am doing just that with these steps:
First, I'm creating a BitmapData object and sizing it the same as the camera image.
Pass the camera image into the BitmapData object.
Create a Bitmap object and pass in the BitmapData.
Resize it to fit on the stage.
Check for Camera Roll and then create a savedBmpData BitmapData object at the size of the screen.
Pass in the bmp.
Save it to the Camera Roll.
The problem is that when the image is displayed on the phone, it shows THE ENTIRE (uncropped) image. However, the image that is saved to the phone is only the top 800x480 corner of the image. What is wrong? How do we save an image to the Camera Roll that is larger than the display area of the phone. It seems like the only way to save the entire camera image is to resize it to fit the stage and then capture the stage into a bitmapData object.
FILTERS
If you apply any filters to the bitmapData object, the filter effects will display on the phone, but if the image is saved to the Camera Roll, then all the filters are lost and it only saves the original (unfiltered) image.
FINGER FRIENDLY UI COMPONENTS
Do they exist?
ADDITIONAL NOTES
The max image size that can be saved is 2039x2039 pixels on the HTC Evo. Anything bigger than this resulted in a CameraRoll Error #1 (which there is no documentation for what that means ANYWHERE on the web).

HT4863 How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

You can't change it, and I suspect few email providers would allow a file that big. Consider uploading it to a service like Dropbox, then email the link allowing the recipient to download it.

FILE and FTP Adapter file size limit

Hi,
Oracle SOA Suite ESB related:
I see that there is a file size limit of 7MB for transferring using File and FTP adapter and that debatching can be used to overcome this issue. Also see that debatching can be done only for strucutred files.
1) What can be done to transfer unstructured files larger than 7MB from one server to the other using FTP adapter?
2) For structured files, could someone help me in debatching a file with the following structure.
000|SEC-US-MF|1234|POPOC|679
100|PO_226312|1234|7130667
200|PO_226312|1234|Line_id_1
300|Line_id_1|1234|Location_ID_1
400|Location_ID_1|1234|Dist_ID_1
100|PO_226355|1234|7136890
200|PO_226355|1234|Line_id_2
300|Line_id_2|1234|Location_ID_2
400|Location_ID_2|1234|Dist_ID_2
100|PO_226355|1234|7136890
200|PO_226355|1234|Line_id_N
300|Line_id_N|1234|Location_ID_N
400|Location_ID_N|1234|Dist_ID_N
999|SSS|1234|88|158
I would need a the complete data in a single file at the destination for each file in the source. If there are as many number of files as the number of batches at the destination, I would need the file output file structure be as follows:
000|SEC-US-MF|1234|POPOC|679
100|PO_226312|1234|7130667
200|PO_226312|1234|Line_id_1
300|Line_id_1|1234|Location_ID_1
400|Location_ID_1|1234|Dist_ID_1
999|SSS|1234|88|158
Thanks in advance,
RV
Edited by: user10236075 on May 25, 2009 4:12 PM
Edited by: user10236075 on May 25, 2009 4:14 PM

Ok Here are the steps
1. Create an inbound file adapter as you normally would. The schema is opaque, set the polling as required.
2. Create an outbound file adapter as you normally would, it doesn't really matter what xsd you use as you will modify the wsdl manually.
3. Create a xsd that will read your file. This would typically be the xsd you would use for the inbound adapter. I call this address-csv.xsd.
4. Create a xsd that is the desired output. This would typically be the xsd you would use for the outbound adapter. I have called this address-fixed-length.xsd. So I want to map csv to fixed length format.
5. Create the xslt that will map between the 2 xsd. Do this in JDev, select the BPEL project, right-click -> New -> General -> XSL Map
6. Edit the outbound file partner link wsdl, the the jca operations as the doc specifies, this is my example.
<jca:binding />
        <operation name="MoveWithXlate">
      <jca:operation
          InteractionSpec="oracle.tip.adapter.file.outbound.FileIoInteractionSpec"
          SourcePhysicalDirectory="foo1"
          SourceFileName="bar1"
          TargetPhysicalDirectory="C:\JDevOOW\jdev\FileIoOperationApps\MoveHugeFileWithXlate\out"
          TargetFileName="purchase_fixed.txt"
          SourceSchema="address-csv.xsd"
          SourceSchemaRoot ="Root-Element"
          SourceType="native"
          TargetSchema="address-fixedLength.xsd"
          TargetSchemaRoot ="Root-Element"
          TargetType="native"
          Xsl="addr1Toaddr2.xsl"
          Type="MOVE">
      </jca:operation> 7. Edit the outbound header to look as follows
    <types>
        <schema attributeFormDefault="qualified" elementFormDefault="qualified"
                targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/file/"
                xmlns="http://www.w3.org/2001/XMLSchema"
                xmlns:FILEAPP="http://xmlns.oracle.com/pcbpel/adapter/file/">
            <element name="OutboundFileHeaderType">
                <complexType>
                    <sequence>
                        <element name="fileName" type="string"/>
                        <element name="sourceDirectory" type="string"/>
                        <element name="sourceFileName" type="string"/>
                        <element name="targetDirectory" type="string"/>
                        <element name="targetFileName" type="string"/>
                    </sequence>
                </complexType>
            </element>
        </schema>
    </types>   8. the last trick is to have an assign between the inbound header to the outbound header partner link that copies the headers. You only need to copy the sourceDirectory and SourceGileName
    <assign name="Assign_Headers">
      <copy>
        <from variable="inboundHeader" part="inboundHeader"
              query="/ns2:InboundFileHeaderType/ns2:fileName"/>
        <to variable="outboundHeader" part="outboundHeader"
            query="/ns2:OutboundFileHeaderType/ns2:sourceFileName"/>
      </copy>
      <copy>
        <from variable="inboundHeader" part="inboundHeader"
              query="/ns2:InboundFileHeaderType/ns2:directory"/>
        <to variable="outboundHeader" part="outboundHeader"
            query="/ns2:OutboundFileHeaderType/ns2:sourceDirectory"/>
      </copy>
    </assign>you should be good to go. If you just want pass through then you don't need the native format set to opaque, with no XSLT
cheers
James

JVM heap size limit under Windows

Hi,
I'm looking either for some help with a workaround, or
confirmation that the information I've found is still the case for the
current state of Java.
Development machine is Win XP Pro, 2G RAM.
Biggest heap I can allocate is about 1.6G, and that is not large enough for this
app.
I have a Swing application that
1) must run on Win XP, 32 bit
2) must implement an editor (similar to Excel but with fewer features) to handle large csv files
( up to about 800Mb).
3) Strong preference for Java 5, though higher could conceivably be supported.
Research so far tells me that this is the result of process memory limitations
of Windows and the JVM, and that I might be able to squeeze a little more heap with
Windows' rebase command, but probably not enough and I would start running the
risk of conflicts with other applications on my users' systems. Ugh.
Also I read of the Windows /3GB switch, but posts say that the JDK's available are not
built to be able to use that feature. I havent had a chance to add memory to
test that yet. However, I'm also under the impression that I should be able to
allocate a heap larger than physical RAM ... except for that process size limit.
So ... my information is basically that I'm stuck with a limit of about 1.6G for
heap size, regardless of the RAM on my computer.
Can anyone confirm whether that is still correct, preferably with a pointer to some
official reference ?
Or better yet, point me toward a workaround?
Thanks!
-tom

>
Some bookmarks I have on this topic.
http://sinewalker.wordpress.com/2007/03/04/32-bit-windows-and-jvm-virtual-memory-limit/
http://stackoverflow.com/questions/171205/java-maximum-memory-on-windows-xp
The first link pulled together what I found in lots of bits and pieces elsewhere, nice to have a coherent summary :)
The second link offered a bit of insight into the jvm that I hadn't seen yet .
Thanks!

Framemaker 7.2 crashing - size limit?

Similar Messages

Maybe you are looking for